How to solve error 1015

error 1015 occuring during ugrade threw itune

This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.  Very rarely this error is caused by a hardware issue and requires service.

Similar Messages

  • HT1414 how to solve error 1015 to restore software in iphone 3

    I tried to restore factory setting on my iphone 3 sortly after I bought on ebay. During restoring, all foftwares were ommitted and
    message was "iphone cannot instal lower softwares". When I tried to instal iphone software from itune, the messageas was "The iphone could not be restored.
    An unknown error occurred (10150".
    Is there any solution to restore my iphone 3?
    Sam

    Is it 1015 like you say in the subject:
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    http://support.apple.com/kb/TS3694#error1015
    I can't find an iTunes error 10150

  • TS3694 how to solve error 1015

    when the iphone is restoring,the firmwire is not varifing.the error code is 1015

    1015 error: There are 4 possible causes of this error:
    The activation server truly is unavailable. Rare, usually fixed within minutes.
    Your antivirus or firewall or router's firewall is blocking access to
    gs.apple.com on ports 80 and 443.
    Your iPhone is jailbroken or otherwise hacked.
    The computer you connected to during the restore/update was
    used to hack/jailbreak some other iOS device, and its
    network database was corrupted during the process.
    (Thanks to Lawrence Finch for the wording in
    https://discussions,apple.com/thread/4793244?start=90 )

  • HT1414 how do i solve error 1015 when restoring?

    how do i solve error 1015 when restoring ios using itunes?

    You find an answer somewhere else or buy a new phone.
    You can not get help here for a jailbroken phone.

  • Anyone figure out how to solve the 1015 error

    anyone figure out how to solve the 1015 error

    Each version of Photoshop has its own installation path therefore a different application as fars as Wacom Configuration.  You would need to set preferences for each Photoshop installed on your system.  However if you know XML.  Wacom Tablet Preference File Utility can save your Wacom preferences into an XML file.  That you may be able to duplicate a Photoshop install and the change the Photoshop Path. Or just change the prion version pathe the the new Photoshop path then restore your Wacom Preferences using the modified XML preference file.
    Here you see part of my wacom preferences I have set preferences for all Photoshop installed on my workstation.

  • How to solve error -1450?

    I have been re-installed iTunes, and it keeps pop-up with the error -1450 ( cannot save music library ), and it reloads all the playlist each time I switch on the computer and open iTunes.
    I have been re-install iTunes after the error appear, and it seems although I have re-install iTunes, the problem doesn't solve and keeps repeat.
    For any kindness, please tell how I can fix this error, as I cannot find any articles on support page about this.
    Thanks

    Does anyone know how to solve error 1450 or even what
    caused it!? This problem is killing me.
    I found this by doing a search on Google for "Error 1450": http://support.microsoft.com/kb/236964/EN-US/

  • TS3694 Please tell me how to resolve error 1015 when trying to restore an Iphone 3g!!!!

    Please tell me how to resolve error 1015 when trying to restore an Iphone 3g!!!!

    https://discussions.apple.com/message/18540882#18540882

  • HT1414 how to resolve error 1015 while restoring iphone3g to 4.2.1

    How to resolve error 1015 while restoring iphone 3g to ios 4.2.1

    This error is returned by jailbroken iPhones. Sorry, can't discuss such iPhones as per terms and conditions of this Forum.

  • TS3694 How to solve error 3194 ?

    How to solve error 3194 in iTunes, when trying to upgrade iPod touch to ios 5 ? Thank you.

    The common errors and their resolution are contained here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • How to fix error 1015 while restoring iphone 3G

    how to fix error 1015 while restoring

    This error is usually the result of hacking (jailbreaking) the iPhone. It is likely now bricked.
    Error 1015: This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple."

  • TS3694 how to release error 1015 iphone 3g stuck recovery mode.thank you

    how to release error 1015 iphone 3g stuck recovery mode. thank you

    Try google. You can not get help here with jailbroken / hacked iPhones.

  • TS3694 How can I solve ERROR 1015

    After restoring the phone (3G) in iTunes and "applying the latest firmware" the process quits out with "error 1015 occurred". I think the guy I got this phone from jailbroke it rather than getting a proper (and perfectly legal and easy) unlock from O2. :-(
    Anyway, is there any way to get this working again?

    This Error Code is indicative of the Device being jailbroken / Hacked...
    See Here  >  https://discussions.apple.com/message/18856011#18856011
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    http://support.apple.com/kb/HT3743

  • How to solve Error in http connection. Error -1

    urlMidlet2===http://localhost:8080/testProj?userId=20&selMPBL=23&svMPBL=IPOD+Touch+Screen+e!1!Tue+Jan+06+00:00:00+UTC+2009!Tue+Jan+06+00:00:00+UTC+2009!Sat+Jan+31+00:00:00+UTC+2009!Mp3+Player!IPOD!Rejected!12
    [j2mepolish] Generic/DefaultColorPhone: !1!2!1222!13333
    [j2mepolish] Generic/DefaultColorPhone: Protocol for this connection is http
    [j2mepolish] Generic/DefaultColorPhone: This object is connected to localhost host
    [j2mepolish] Generic/DefaultColorPhone: HTTP Port in use is 8080
    [j2mepolish] Generic/DefaultColorPhone: respCode=====-1
    [j2mepolish] Generic/DefaultColorPhone: Error in opening HTTP Connection. Error#-1
    Why is this error coming? How to solve it?
    Thanks in advance.
    Edited by: J2me_Beginner on Jun 7, 2009 9:38 PM

    I am making a form using an interface. When Activate the Form, I got this error:
    Invalid HTTP connection: ADS
    Message no. FPRUN000
    But I do not know how to solve or config ADS. Any one know how to slove this error ?
    Thanks a lot.

  • How to solve error essbase encoding ?

    Dear All,
    Today, I just wanted to load data into a demo database, however, I found that the load information of data load results is error encoding as below:
    ÕýÔÚ¶ÁÈ¡Êý¾Ý¿â [Demo] µÄ¹æÔò SQL ÐÅÏ¢
    ÕýÔÚ¶ÁÈ¡À´×ÔÊý¾Ý¿â [PLP] ¹æÔò¶ÔÏóµÄ¹æÔò
    ÆôÓÃÁ˲¢ÐÐÊý¾Ý¼ÓÔØ: [1] ¿é×¼±¸Ị̈߳¬¶ø [1] ¿éдÏ̡߳£
    ¼ÓÔØ´ËÊý¾ÝÎļþδÐÞ¸ÄÈκÎÊý¾ÝÖµ
    [LoadData.rul] µÄÊý¾Ý¼ÓÔؾ¹ýµÄʱ¼ä: [9.516] Ãë
    Êý¾Ý¿âµ¼ÈëÒÑÍê³É ['ZZTest'.'Demo']
    ÒÑ×¼±¸ºÃÊä³öÁÐ: [0]
    Of course, I modified the env variable ESSLANG from English_UnitedStates.Latin1@Binary to SimplifiedChinese_China.MS936@Binary. What a pity, it doesn't work.
    As you know, the Essbase Language was set to SimplifiedChinese_China.MS936@Binary when configuring.
    So, who knows how to solve it ?

    Open log with utf8 text editor
    u can remove chines localization if copy to bin files from C:\Hyperion\products\Essbase\EssbaseServer\localized\en\bin

  • How to solve error when run Depreciation (T-Code:AFAB)

    Dear All Experts,
    Hi,
    I found error when run Depreciation for period 9 FYI. I had run Planed posting period Depreciation (TCode: AFAB).  with fiscal year: 2010, posting period: 9, reason for posting run: Planed posting run. Select on Test Run. Then i found error message as below.
    Documents manually posted within dep.doc.number range
         Message no. AA728
    Diagnosis
         In the number range interval for the document type for posting
         depreciation, a document  has been posted which was not created within
         the framework of depreciation posting. The last document posted by
         depreciation posting was assigned the number .
    Procedure
         Contact your Systems Specialist. When changing the number range interval
         for the document type in depreciation posting, you have to specify a new
         interval in which no documents exist. Using organizational measures, you
         can guarantee that there are no documents apart from those created by
         depreciation posting in this number range.
    Would you help me how to solve this error?
    Thank you in advance
    Best Regards
    Utarat.P

    Hi Utarat,
    first question is: have you really manually posted a Documents within dep.doc.number range 
    If you post with RABUCH00, note 193984 could be relevant for you. 
    Check if the intervall in Table TABA don't fits with the Intervall in BKPF.
    Example:
    TABA
    MANDT BUKRS  AFBLGJ AFBLPE AFBANZ BLNRF      BLNRT      XBUKZ  
    100   XXXX   2010   004    01     4200000013 4200000016 X      
    100   XXXX   2010   005    01     4200000017 4200000020 X      
    100   XXXX   2010   006    01     4200000021 4200000024        
    On the other Hand In Table BKPF (or Tr. FB03) you can see that 4200000037 already   
    exits.                                                                               
    BUKRS  BELNR      GJAHR BLART BUDAT      CPUDT      CPUTM    TCODE
    XXXX   4200000024 2010  YY    30.06.2010 06.07.2010 19:36:30 ABF1 
    XXXX   4200000037 2010  YY    30.06.2010 06.07.2010 19:37:47 ABF1 
    Regards Bernhard

Maybe you are looking for