How to solve error 1611 on ipod3?

I have updated my ipod touch 3rd generation for latest version of itunes.Now it's not working & shows only apple icon on ipod screen. Also it is not connecting to itunes of my laptop, it's showing only summery part without serial no. and other information. After that I also updated itunes on my laptop. Yet when I am trying to restore device it's giving me error 1611. Please help ..! Thanks

Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
Above from:
http://support.apple.com/kb/TS3694

Similar Messages

  • How to solve error -1450?

    I have been re-installed iTunes, and it keeps pop-up with the error -1450 ( cannot save music library ), and it reloads all the playlist each time I switch on the computer and open iTunes.
    I have been re-install iTunes after the error appear, and it seems although I have re-install iTunes, the problem doesn't solve and keeps repeat.
    For any kindness, please tell how I can fix this error, as I cannot find any articles on support page about this.
    Thanks

    Does anyone know how to solve error 1450 or even what
    caused it!? This problem is killing me.
    I found this by doing a search on Google for "Error 1450": http://support.microsoft.com/kb/236964/EN-US/

  • TS3694 How to solve error 3194 ?

    How to solve error 3194 in iTunes, when trying to upgrade iPod touch to ios 5 ? Thank you.

    The common errors and their resolution are contained here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • How to fix error 1611 on ipad2

    how to fix error 1611 on ipad2

    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    The above comes from here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • How to solve Error in http connection. Error -1

    urlMidlet2===http://localhost:8080/testProj?userId=20&selMPBL=23&svMPBL=IPOD+Touch+Screen+e!1!Tue+Jan+06+00:00:00+UTC+2009!Tue+Jan+06+00:00:00+UTC+2009!Sat+Jan+31+00:00:00+UTC+2009!Mp3+Player!IPOD!Rejected!12
    [j2mepolish] Generic/DefaultColorPhone: !1!2!1222!13333
    [j2mepolish] Generic/DefaultColorPhone: Protocol for this connection is http
    [j2mepolish] Generic/DefaultColorPhone: This object is connected to localhost host
    [j2mepolish] Generic/DefaultColorPhone: HTTP Port in use is 8080
    [j2mepolish] Generic/DefaultColorPhone: respCode=====-1
    [j2mepolish] Generic/DefaultColorPhone: Error in opening HTTP Connection. Error#-1
    Why is this error coming? How to solve it?
    Thanks in advance.
    Edited by: J2me_Beginner on Jun 7, 2009 9:38 PM

    I am making a form using an interface. When Activate the Form, I got this error:
    Invalid HTTP connection: ADS
    Message no. FPRUN000
    But I do not know how to solve or config ADS. Any one know how to slove this error ?
    Thanks a lot.

  • How to solve error essbase encoding ?

    Dear All,
    Today, I just wanted to load data into a demo database, however, I found that the load information of data load results is error encoding as below:
    ÕýÔÚ¶ÁÈ¡Êý¾Ý¿â [Demo] µÄ¹æÔò SQL ÐÅÏ¢
    ÕýÔÚ¶ÁÈ¡À´×ÔÊý¾Ý¿â [PLP] ¹æÔò¶ÔÏóµÄ¹æÔò
    ÆôÓÃÁ˲¢ÐÐÊý¾Ý¼ÓÔØ: [1] ¿é×¼±¸Ị̈߳¬¶ø [1] ¿éдÏ̡߳£
    ¼ÓÔØ´ËÊý¾ÝÎļþδÐÞ¸ÄÈκÎÊý¾ÝÖµ
    [LoadData.rul] µÄÊý¾Ý¼ÓÔؾ¹ýµÄʱ¼ä: [9.516] Ãë
    Êý¾Ý¿âµ¼ÈëÒÑÍê³É ['ZZTest'.'Demo']
    ÒÑ×¼±¸ºÃÊä³öÁÐ: [0]
    Of course, I modified the env variable ESSLANG from English_UnitedStates.Latin1@Binary to SimplifiedChinese_China.MS936@Binary. What a pity, it doesn't work.
    As you know, the Essbase Language was set to SimplifiedChinese_China.MS936@Binary when configuring.
    So, who knows how to solve it ?

    Open log with utf8 text editor
    u can remove chines localization if copy to bin files from C:\Hyperion\products\Essbase\EssbaseServer\localized\en\bin

  • How to solve error when run Depreciation (T-Code:AFAB)

    Dear All Experts,
    Hi,
    I found error when run Depreciation for period 9 FYI. I had run Planed posting period Depreciation (TCode: AFAB).  with fiscal year: 2010, posting period: 9, reason for posting run: Planed posting run. Select on Test Run. Then i found error message as below.
    Documents manually posted within dep.doc.number range
         Message no. AA728
    Diagnosis
         In the number range interval for the document type for posting
         depreciation, a document  has been posted which was not created within
         the framework of depreciation posting. The last document posted by
         depreciation posting was assigned the number .
    Procedure
         Contact your Systems Specialist. When changing the number range interval
         for the document type in depreciation posting, you have to specify a new
         interval in which no documents exist. Using organizational measures, you
         can guarantee that there are no documents apart from those created by
         depreciation posting in this number range.
    Would you help me how to solve this error?
    Thank you in advance
    Best Regards
    Utarat.P

    Hi Utarat,
    first question is: have you really manually posted a Documents within dep.doc.number range 
    If you post with RABUCH00, note 193984 could be relevant for you. 
    Check if the intervall in Table TABA don't fits with the Intervall in BKPF.
    Example:
    TABA
    MANDT BUKRS  AFBLGJ AFBLPE AFBANZ BLNRF      BLNRT      XBUKZ  
    100   XXXX   2010   004    01     4200000013 4200000016 X      
    100   XXXX   2010   005    01     4200000017 4200000020 X      
    100   XXXX   2010   006    01     4200000021 4200000024        
    On the other Hand In Table BKPF (or Tr. FB03) you can see that 4200000037 already   
    exits.                                                                               
    BUKRS  BELNR      GJAHR BLART BUDAT      CPUDT      CPUTM    TCODE
    XXXX   4200000024 2010  YY    30.06.2010 06.07.2010 19:36:30 ABF1 
    XXXX   4200000037 2010  YY    30.06.2010 06.07.2010 19:37:47 ABF1 
    Regards Bernhard

  • How to solve error code -1074397179 in Imaq Attribute VI

    I keep getting error message (-1074397179) when I run the imaq attribute VI. What should I do to solve this problem? What are the parameters that i can change to solve this. The error message gave this as img_err_par1. But I have no idea how to solve this problem.
    Attachments:
    IMAQ_Attribute.vi ‏74 KB

    I compared your attribute VI to my own (which is IMAQ 2.6 and working great) and the only differences are in the Attributes input and the Type/Attr/ID input. I have attached my version of the VI in LabVIEW 6.1 below. Try using this and see if it gives you the same errors.
    Hope this helps-
    Julie S.
    Attachments:
    IMAQ_Attribute.vi ‏77 KB

  • How to solve "error occurred in the data manipulation engine"? 64bit Windows 7

    Hi all
    I'm having quite a testing time here trying to use the new SAP PA 2.0. After installation the software launches, the Automated Analytics seems to work fine but not the Expert Analytics.
    Steps as follows:
    Launch PA
    Choose and launch Expert Analytics
    Choose Try with Samples
    Open the Dairy Wholesaler file
    Error: An error occurred in the data manipulation engine. Check the manipulation parameters. (HDB 01001)
    I also get this same error when I try to create my own New Dataset.
    I’m on 64bit Windows 7 Pro
    Is there anyone who knows how to solve this problem. I've searched the SCN and online and have tried the following:
    1. Uninstall and re-install. Doesn't help
    2. Uninstall and delete old lumira related folders on the C drive e.g. the SAPPA and SAPVI folders on the C drive, then re-install.
    Much appreciated if anyone could shed some light on this. I've previously had Lumira working with no issues. I've since uninstalled Lumira, Predictive Analytics, and Infinite Insights (as PA 2.0 is all of this combined)
    Regards
    Ria

    In case anyone has the same problem, I found the the following helpful (taken from Error after upgrading to 1.18 ). The solution is for Lumira however its the same steps for PA2
    1.  You might want to try a ‘clean’ uninstall / reinstall . After uninstalling, try deleting these folders:
    C:\Users\Public\sapvi
    C:\Users\<user>\AppData\Local\SAP\Lumira
    C:\Users\<user>\AppData\Local\Temp\sapvi
    In this step I searched for every SAP related file in AppData in the Public, User, and my own username folder under \Users\
    2.  Next, to launch the application, explicitly click "Run as Administrator" on the install file

  • HT201442 how to solve error 3004?

    Hi All,
              I haveing problem during restoring. Unable to restore due to error 3004. Anybody knows how to solve it. Thk.

    Hello, kyawmyintshein85. 
    Thank you for visiting Apple Support Communities. 
    Here are the steps that I would recommend going through when experiencing restore error 3004. 
    Resolve communication issues
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build".
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Also, make sure to process and updates for iTunes and your computer.
    Cheers,
    Jason H. 

  • How to solve error  : ORA-6512 at APPS.EAM_WORKORDER_PKG

    In new EAM installation process, the next error occurs during the creations of new operations to WO and attachments of new activities, which have several operations.
    ERROR:ORA-06502: PL/SQL :numeric or value error: character string buffer too small
    ORA-06512: at ''APPS.EAM_WORKORDER_PKG'', line 1529
    ORA-06512: at ''APPS.EAM_WORKORDER_PKG'', line 1966
    The implementation is in 12.0.4 version.
    Some one know how to solve this issue en EAM EBS.
    Thanks.

    Thanks for your help,
    I have reviewed all information sent for you. The issue finally was solve with the action plan descibed in the next :
    WICDOL - Autocreate Final Assembly Orders Completing With Warning - "ORA-01400: cannot insert NULL into ("WIP"."WIP_OPERATIONS"."WSM_BONUS_QUANTITY") " [ID 734605.1]
    This particular issue afects the operations creation, assigment of activities with predefined operations and state change.

  • How to solve Error -1074396080 occurred at IMAQ array to color Image

    Hello,
    I am getting above mentioned error.
    Here I have attached my screen shot of the error.
    Could any one Please guide me how to solve this error.
    I am using Kinesthesia kinect driver which generate U24 Bit RGB Image and I want to convert it in IMAQ Image type, But I am getting mentioned error.
    But when I am not using the vision acquisition and vision assistant then every thing is fine means there is no any error which I have attached in attachment 2.
    Please guide me how to solve this problem.
    Thank you very much.
    Solved!
    Go to Solution.
    Attachments:
    invalid image type.png ‏251 KB
    imaq2.png ‏56 KB

    Thank you very much for quick reply.
    I follow your instruction but it give me still same error.
    here in attachment I have attache screen shot as well Vi so you have a look.
    thank you very much once again for help and time.
    Attachments:
    Unbenannt.png ‏174 KB
    kinect templet.vi ‏137 KB

  • How to solve error message in webui

    Hi ,
    Please find the attachment.Ho
    I am getting this error in webui level. How to solve the error messages in webui level.
    Item 30 : Access to changed configuration data is not possible.
    What procedure i will follow can you tell me.
    Regards,
    Sai

    Dear Sai,
    please consider note 1647590, this note might help you tol solve the situation.
    Best regards
    Rene

  • How to fix error 1611?

    My iphone 3G have been this error 1611 when i restore, who can help me fix this error?

    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    The above comes from here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • How to solve "Error: code segment of method _jspService(...) too large"

    Hi, I am trying to compile a JSPX Page and I keep getting "Error: code segment of method _jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse) too large", in some Forums say that this Error is due to a Limit in the Size of Code that a Try/Catch Block can contain (64K), They suggest to remove such Blocks but I don't know how to do this in JDeveloper 10.1.3.2.0, some advice or suggestion?
    Thanks in Advance.
    PD: I cannot refactor the Code into different Pages.

    Hi,
    if I remember well then the problem is solved by setting the compiler used to JAVAC. This is a setting in the project properties
    Frank

Maybe you are looking for

  • Trying to download itunes,but stops at 21 percent.

    trying to download itunes,but it stops at 21 percent.Would it be my dodo dongle..too slow?

  • Dropped Frames/Processor

    Hey, I just installed FinalCut Studio 2 on my Macbook and whenever I try to capture footage (hd dvc 720p60) I get dropped frames. I am also unable to open projects of the same format. I have set the sequence and capture settings according to the foot

  • Hi i want query in pl/sql please help me in that

    i have two tables mbr and loyalty.i have to compare these two tables with primary key and have to get matching records in two tables.and then i have keep all the matching records in one temp table.and then deleting mbr table, then updating all temp t

  • Sidebar items gone in finder?

    Just wondering, but I don't see my sidebar items in the finder anymore like I thought it was before: No music, photo's movies items. However, when I open a document from within an application, they are still there. Is this normal? André

  • Revenue transferred  from one WBS to Another

    Hi , Is any realationship exists to check the revenue transferred and realted information from one WBS to another.WBS ? The main criteria is -From WBS  to TO WBS  for revenue transfer? Thanks Anil Kumar