How to solve error lretcode=-1004
Hi,
I got the error when try to update Sales Order value. The coding is lRetCode=oSalesOrder.Update. However, some time it can update successfully but sometime it will return failure code -1004. I cannot allocate where the problem is.
Did anyone has same experience as me and can solve the problem?
Regards,
Anna
Dear Vasu Natari,
The following are my code:
I try to update the NumAtCard value after user pressing "Add" button. If user try to use duplicate the line item, then lRetCode will has error -1004. If user select the item one by one and not using duplicate line, then program can work properly. Do you have any idea why user cannot use duplicate line in the following code?
If BusinessObjectInfo.FormTypeEx = "139" And BusinessObjectInfo.EventType = SAPbouiCOM.BoEventTypes.et_FORM_DATA_ADD Then
If BusinessObjectInfo.BeforeAction = False And BusinessObjectInfo.ActionSuccess And BusinessObjectInfo.Type <> 112 Then
oForm = SBO_Application.Forms.Item(BusinessObjectInfo.FormUID)
oboDS = oForm.DataSources.DBDataSources.Item("ORDR")
oGenvalue = oboDS.GetValue("U_GEN_CNT", 0)
oPurFlag = oForm.Items.Item("104").Specific
oPurFlag1 = oPurFlag.Checked
'Case 1: not back to back order and copy the So number as Contract number
If oGenvalue.Trim = "Y" Then
Dim xmlDoc As System.Xml.XmlDocument = New System.Xml.XmlDocument
xmlDoc.LoadXml(BusinessObjectInfo.ObjectKey)
Dim objectKey As String
objectKey = xmlDoc.SelectSingleNode("//DocEntry").InnerText
Dim oSalesOrder As SAPbobsCOM.Documents = Nothing
oSalesOrder = oDICompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
If oSalesOrder.GetByKey(CInt(objectKey)) Then
Dim salesOrderNum As String = oSalesOrder.DocNum
Dim Query2 As String
Dim oseries As String
Dim oseriesname As String
oseries = oSalesOrder.Series
oRSMyTable = oDICompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
'Perform the ""
Query2 = "select t2.beginstr from ordr t1, nnm1 t2 where t2.series='" & oseries & "'"
oRSMyTable.DoQuery(Query2)
oseriesname = oRSMyTable.Fields.Item("beginstr").Value()
oSalesOrder.NumAtCard = oseriesname + "-" + salesOrderNum
lRetCode = oSalesOrder.Update
If lRetCode = 0 Then
SBO_Application.MessageBox("Update Successfully")
Else
SBO_Application.MessageBox("Update Fail")
End If
End If
End If
End If
End If
Please help.
Regards,
Anna
Similar Messages
-
How to solve error -1450?
I have been re-installed iTunes, and it keeps pop-up with the error -1450 ( cannot save music library ), and it reloads all the playlist each time I switch on the computer and open iTunes.
I have been re-install iTunes after the error appear, and it seems although I have re-install iTunes, the problem doesn't solve and keeps repeat.
For any kindness, please tell how I can fix this error, as I cannot find any articles on support page about this.
ThanksDoes anyone know how to solve error 1450 or even what
caused it!? This problem is killing me.
I found this by doing a search on Google for "Error 1450": http://support.microsoft.com/kb/236964/EN-US/ -
TS3694 How to solve error 3194 ?
How to solve error 3194 in iTunes, when trying to upgrade iPod touch to ios 5 ? Thank you.
The common errors and their resolution are contained here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
HT201442 how to solve error 3004?
Hi All,
I haveing problem during restoring. Unable to restore due to error 3004. Anybody knows how to solve it. Thk.Hello, kyawmyintshein85.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing restore error 3004.
Resolve communication issues
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build".
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Also, make sure to process and updates for iTunes and your computer.
Cheers,
Jason H. -
How to solve Error in http connection. Error -1
urlMidlet2===http://localhost:8080/testProj?userId=20&selMPBL=23&svMPBL=IPOD+Touch+Screen+e!1!Tue+Jan+06+00:00:00+UTC+2009!Tue+Jan+06+00:00:00+UTC+2009!Sat+Jan+31+00:00:00+UTC+2009!Mp3+Player!IPOD!Rejected!12
[j2mepolish] Generic/DefaultColorPhone: !1!2!1222!13333
[j2mepolish] Generic/DefaultColorPhone: Protocol for this connection is http
[j2mepolish] Generic/DefaultColorPhone: This object is connected to localhost host
[j2mepolish] Generic/DefaultColorPhone: HTTP Port in use is 8080
[j2mepolish] Generic/DefaultColorPhone: respCode=====-1
[j2mepolish] Generic/DefaultColorPhone: Error in opening HTTP Connection. Error#-1
Why is this error coming? How to solve it?
Thanks in advance.
Edited by: J2me_Beginner on Jun 7, 2009 9:38 PMI am making a form using an interface. When Activate the Form, I got this error:
Invalid HTTP connection: ADS
Message no. FPRUN000
But I do not know how to solve or config ADS. Any one know how to slove this error ?
Thanks a lot. -
How to solve error essbase encoding ?
Dear All,
Today, I just wanted to load data into a demo database, however, I found that the load information of data load results is error encoding as below:
ÕýÔÚ¶ÁÈ¡Êý¾Ý¿â [Demo] µÄ¹æÔò SQL ÐÅÏ¢
ÕýÔÚ¶ÁÈ¡À´×ÔÊý¾Ý¿â [PLP] ¹æÔò¶ÔÏóµÄ¹æÔò
ÆôÓÃÁ˲¢ÐÐÊý¾Ý¼ÓÔØ: [1] ¿é×¼±¸Ị̈߳¬¶ø [1] ¿éдÏ̡߳£
¼ÓÔØ´ËÊý¾ÝÎļþδÐÞ¸ÄÈκÎÊý¾ÝÖµ
[LoadData.rul] µÄÊý¾Ý¼ÓÔؾ¹ýµÄʱ¼ä: [9.516] Ãë
Êý¾Ý¿âµ¼ÈëÒÑÍê³É ['ZZTest'.'Demo']
ÒÑ×¼±¸ºÃÊä³öÁÐ: [0]
Of course, I modified the env variable ESSLANG from English_UnitedStates.Latin1@Binary to SimplifiedChinese_China.MS936@Binary. What a pity, it doesn't work.
As you know, the Essbase Language was set to SimplifiedChinese_China.MS936@Binary when configuring.
So, who knows how to solve it ?Open log with utf8 text editor
u can remove chines localization if copy to bin files from C:\Hyperion\products\Essbase\EssbaseServer\localized\en\bin -
How to solve error when run Depreciation (T-Code:AFAB)
Dear All Experts,
Hi,
I found error when run Depreciation for period 9 FYI. I had run Planed posting period Depreciation (TCode: AFAB). with fiscal year: 2010, posting period: 9, reason for posting run: Planed posting run. Select on Test Run. Then i found error message as below.
Documents manually posted within dep.doc.number range
Message no. AA728
Diagnosis
In the number range interval for the document type for posting
depreciation, a document has been posted which was not created within
the framework of depreciation posting. The last document posted by
depreciation posting was assigned the number .
Procedure
Contact your Systems Specialist. When changing the number range interval
for the document type in depreciation posting, you have to specify a new
interval in which no documents exist. Using organizational measures, you
can guarantee that there are no documents apart from those created by
depreciation posting in this number range.
Would you help me how to solve this error?
Thank you in advance
Best Regards
Utarat.PHi Utarat,
first question is: have you really manually posted a Documents within dep.doc.number range
If you post with RABUCH00, note 193984 could be relevant for you.
Check if the intervall in Table TABA don't fits with the Intervall in BKPF.
Example:
TABA
MANDT BUKRS AFBLGJ AFBLPE AFBANZ BLNRF BLNRT XBUKZ
100 XXXX 2010 004 01 4200000013 4200000016 X
100 XXXX 2010 005 01 4200000017 4200000020 X
100 XXXX 2010 006 01 4200000021 4200000024
On the other Hand In Table BKPF (or Tr. FB03) you can see that 4200000037 already
exits.
BUKRS BELNR GJAHR BLART BUDAT CPUDT CPUTM TCODE
XXXX 4200000024 2010 YY 30.06.2010 06.07.2010 19:36:30 ABF1
XXXX 4200000037 2010 YY 30.06.2010 06.07.2010 19:37:47 ABF1
Regards Bernhard -
How to solve error code -1074397179 in Imaq Attribute VI
I keep getting error message (-1074397179) when I run the imaq attribute VI. What should I do to solve this problem? What are the parameters that i can change to solve this. The error message gave this as img_err_par1. But I have no idea how to solve this problem.
Attachments:
IMAQ_Attribute.vi 74 KBI compared your attribute VI to my own (which is IMAQ 2.6 and working great) and the only differences are in the Attributes input and the Type/Attr/ID input. I have attached my version of the VI in LabVIEW 6.1 below. Try using this and see if it gives you the same errors.
Hope this helps-
Julie S.
Attachments:
IMAQ_Attribute.vi 77 KB -
How to solve "error occurred in the data manipulation engine"? 64bit Windows 7
Hi all
I'm having quite a testing time here trying to use the new SAP PA 2.0. After installation the software launches, the Automated Analytics seems to work fine but not the Expert Analytics.
Steps as follows:
Launch PA
Choose and launch Expert Analytics
Choose Try with Samples
Open the Dairy Wholesaler file
Error: An error occurred in the data manipulation engine. Check the manipulation parameters. (HDB 01001)
I also get this same error when I try to create my own New Dataset.
I’m on 64bit Windows 7 Pro
Is there anyone who knows how to solve this problem. I've searched the SCN and online and have tried the following:
1. Uninstall and re-install. Doesn't help
2. Uninstall and delete old lumira related folders on the C drive e.g. the SAPPA and SAPVI folders on the C drive, then re-install.
Much appreciated if anyone could shed some light on this. I've previously had Lumira working with no issues. I've since uninstalled Lumira, Predictive Analytics, and Infinite Insights (as PA 2.0 is all of this combined)
Regards
RiaIn case anyone has the same problem, I found the the following helpful (taken from Error after upgrading to 1.18 ). The solution is for Lumira however its the same steps for PA2
1. You might want to try a ‘clean’ uninstall / reinstall . After uninstalling, try deleting these folders:
C:\Users\Public\sapvi
C:\Users\<user>\AppData\Local\SAP\Lumira
C:\Users\<user>\AppData\Local\Temp\sapvi
In this step I searched for every SAP related file in AppData in the Public, User, and my own username folder under \Users\
2. Next, to launch the application, explicitly click "Run as Administrator" on the install file -
How to solve error : ORA-6512 at APPS.EAM_WORKORDER_PKG
In new EAM installation process, the next error occurs during the creations of new operations to WO and attachments of new activities, which have several operations.
ERROR:ORA-06502: PL/SQL :numeric or value error: character string buffer too small
ORA-06512: at ''APPS.EAM_WORKORDER_PKG'', line 1529
ORA-06512: at ''APPS.EAM_WORKORDER_PKG'', line 1966
The implementation is in 12.0.4 version.
Some one know how to solve this issue en EAM EBS.
Thanks.Thanks for your help,
I have reviewed all information sent for you. The issue finally was solve with the action plan descibed in the next :
WICDOL - Autocreate Final Assembly Orders Completing With Warning - "ORA-01400: cannot insert NULL into ("WIP"."WIP_OPERATIONS"."WSM_BONUS_QUANTITY") " [ID 734605.1]
This particular issue afects the operations creation, assigment of activities with predefined operations and state change. -
How to solve Error -1074396080 occurred at IMAQ array to color Image
Hello,
I am getting above mentioned error.
Here I have attached my screen shot of the error.
Could any one Please guide me how to solve this error.
I am using Kinesthesia kinect driver which generate U24 Bit RGB Image and I want to convert it in IMAQ Image type, But I am getting mentioned error.
But when I am not using the vision acquisition and vision assistant then every thing is fine means there is no any error which I have attached in attachment 2.
Please guide me how to solve this problem.
Thank you very much.
Solved!
Go to Solution.
Attachments:
invalid image type.png 251 KB
imaq2.png 56 KBThank you very much for quick reply.
I follow your instruction but it give me still same error.
here in attachment I have attache screen shot as well Vi so you have a look.
thank you very much once again for help and time.
Attachments:
Unbenannt.png 174 KB
kinect templet.vi 137 KB -
How to solve error message in webui
Hi ,
Please find the attachment.Ho
I am getting this error in webui level. How to solve the error messages in webui level.
Item 30 : Access to changed configuration data is not possible.
What procedure i will follow can you tell me.
Regards,
SaiDear Sai,
please consider note 1647590, this note might help you tol solve the situation.
Best regards
Rene -
Hi, I am trying to compile a JSPX Page and I keep getting "Error: code segment of method _jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse) too large", in some Forums say that this Error is due to a Limit in the Size of Code that a Try/Catch Block can contain (64K), They suggest to remove such Blocks but I don't know how to do this in JDeveloper 10.1.3.2.0, some advice or suggestion?
Thanks in Advance.
PD: I cannot refactor the Code into different Pages.Hi,
if I remember well then the problem is solved by setting the compiler used to JAVAC. This is a setting in the project properties
Frank -
How to solve Error No 10061 on SAP Netweaver 7.20
Dear Guys
As a stranger to SAP solutions I finally downloaded and installed SAP Netweaver 7.2 on my lap top installation was all ok. Now my main issue is I cant Log on when i click the following message shows up
" partner '127.0.0.1:sapdp00' not reached
WSECONNREFUSED: connection refused
Do you want to see the detailed error description? "
when u cllick ok
a Window opens SAP GUI for Windows 720
partner '127.0.0.1:sapdp00' not reached
Time
Component NI (network interface)
Release 720
Version 40
Module nixxi.cpp
Line 3286
Method NipConnect2:127.0.01:3200
Return Code -10
System Call connect
Error No 10061
Error Text WSECONNREFUSED: connection refused
Counter 1
I check my sapmmc from the desktop
it shows a blue color server pictures and inside the Current Status some of the process is showing Green, red and grey
Frankly I new to this software and dont have any basic idea of how to operate. My intention of installing this is to learn myself with the materials which i had.
Kindly help me to solve these issues
CherianHi,
Have you installed an ABAP system or a Java system?
As I know, there is no Netweaver 7.2 ABAP and only Netweaver CE 7.2 Java exists. Or maybe you installed a Netweaver 7.02 ABAP system. In the SAP MMC, check the status of disp+work, message server processes etc. It should be green.
Check this link for step by step installation:
Step by Step Installation Guide for SAP NetWeaver AS ABAP 7.02 SP6 32-bit Trial Version
However as its a local installation, you would need a Microsoft loop back adapter as well.
http://sites.google.com/site/varunjain786main/VarunJainHome/sap-knowledge-base/loopback-adapter-for-stand-alone-sap
After this try SAPGui again.
Regards,
Srikishan -
How to solve: Error while trying to synchronize Audio and MIDI.
The project consists of an hour long DVD of a play which I have loaded into Logic ( on a MacbookPro) and stripped the audio
and cut it up into regions to name the different parts of the play ( verse/music etc)
Usually I am able to play the project with a small window showing the Movie and watching the audio in the back ground adding markers and notes.
Most of the time this works fine.. but then I get the following message re-occurring every few seconds:
"Error while trying to synchronize Audio and MIDI.
Sample Rate 26848 recognized.
Check conflict between Logic Pro and external device"
There is no MIDI, there is no external device, the Sample Rate is the usual 44.1
Can anyone explain how to stop getting this error message which keeps interrupting workflow?Hello,
open your Audio MIDI Setup utility and set the input to 44100
https://discussions.apple.com/message/12710638#12710638
Maybe you are looking for
-
Unix/Linux Process Monitoring
When I attempt to run the add monitoring wizard in Operations Manager 2012 R2 against the unix/linux process monitor I receive the following error :- Date: 12/02/2015 11:55:23 Application: Operations Manager Application Version: 7.1.10226.0 Severity:
-
Does anyone know any tips for editing video to display on an LED digital billboard?
I was just given a MOV file of a TV commercial they want to display on a digital billboard. It needs to be converted to AVI format. They said when they tried to translate it to AVI, it looked terrible and they couldn't tell what it was. They thought
-
Assigning a value to a constant in Calc Script
Hi All, I'm trying to assign a value to a constant in a calc script, but not able to make it work. I need to get a user entered value from the database such as Indexation Value, and use that many times in my script. Rather than use: "member1"->"membe
-
Optimizing the query performance?
When I run this query it takes 2-3 hours to bring the data. It pulls the data starting 2008 december. How can I optimize the performance for the below query? SELECT e1.Eventdate, TO_CHAR( TO_DATE (e1.eventdate, 'mmddyyyy, ), 'MM/DD/YYYY HH24:MI:SS' )
-
I have this problem whit Final Cut Pro. >>> The operation couldn't be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.) Tengo este problema con Final Cut Pro. This happens when I render. Esto sucede cuando renderizo.