How to solve error message in webui

Hi ,
Please find the attachment.Ho
I am getting this error in webui level. How to solve the error messages in webui level.
Item 30 : Access to changed configuration data is not possible.
What procedure i will follow can you tell me.
Regards,
Sai

Dear Sai,
please consider note 1647590, this note might help you tol solve the situation.
Best regards
Rene

Similar Messages

How to populate a Error message in WebUI Screen

Dear Experts,
I have a small issue in Lead creation screen. I need to restrict the followup document if the lead end date is lesser than the system date, if the end date lesser than the system date system should through a error message in web Ui Screen and the lead follow up creation should be stoped.
We found an enhancement spot in backend(GUI) of lead creation we raised the error message in the backend screen. Here its working fine, But we are not able to get any error message in WebUI lead creation screen.
We written the code in CREATE_ORDER Method of lead creation in GUI ( tcode : CRMD_ORDER). We tried to debug the program using external debuger from webui but its not getting triggered.
Pls suggest me, how to raise a error message for WEBUI lead follow up creation validation.
Kindly do the needful.
Reg,
Anandhan

HI Anandhan,
Try this way,
This should work.
lr_global_messages type ref to cl_crm_genil_global_mess_cont,
        lr_core                 type ref to cl_crm_bol_core,
"Instantiate the error message class.
lr_core = cl_crm_bol_core=>get_instance( ).
if lr_core is bound.
    lr_global_messages ?= lr_core->get_global_message_cont( ).
endif.
        if lr_global_messages is bound.
          call method lr_global_messages->add_message
            exporting
              iv_msg_type       = lv_msg_type
              iv_msg_id         = '
              iv_msg_number     =
              iv_show_only_once = 'X'
              iv_msg_v1         =
              iv_msg_v2         =
        endif.

How to refresh error message log when displaying an order in WebUI?

Hi,
When I create and save an order in WebUI, it shows error messages:
Details Business partner XXXXXXX has status "Not Released"
Details Business partner XXXXXXX has status "Locked"
Key User XXXXXXX may not be used.
Then I goto "BP" and correct corresponding business partner. But when I open order again in "Display" mode in WebUI, the error message is still there.
Is there any way to remove or refresh those incorrect error message in WebUI before display?
Thanks a lot!

Hi lonny,
The scenario in here is that although the error has been rectified, the message still appears.
Check out method ADD_MESSAGE of the class CL_BSP_WD_MESSAGE_SERVICE.
All UI messages are raised via this class itself.
You may enhance this method and remove the second message.
Regards,
Ravi

TS3694 How to solve error 3194 ?

How to solve error 3194 in iTunes, when trying to upgrade iPod touch to ios 5 ? Thank you.

The common errors and their resolution are contained here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting

Anyone know how to fix error message: word cannot complete too many files open

anyone know how to fix error message: word cannot complete too many files open
thanks
Ronny

First, take a look at this thread, toward the end of the second page:
https://discussions.apple.com/thread/1449787?start=0&tstart=0
Your ansswer is there, somewhere.
Unfortunately, you've not provided enough system information to solve this.(The only info is that you use a MacBook Pro.) This issue may have been addressed in a prior version. Update your Support Communitees Profile to include your current hardware, system, and devices.

How to prevent error message for material description in MDG material detail screen, when user click on check action

Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
Sukumar

Hello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß

How to print error messages in browser?

When I visit a jsp file in browser, there's some errors in the jsp file, so the browser returns
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
I want the detail error messages, so I can debug my problem. How to print error message in browser or find the message in some log file?

Hi Kanaraja,
Thanks for your answer. I need to get certain information from the list. So, I use LIST_To_ASCII FM. However, may I know the ascii_tab should be type to what? And after this FM, do I have to use another FM to display the ascii list?
data ABAPLIST type ABAPLIST OCCURS 0.
SUBMIT RPCALCU0 VIA SELECTION-SCREEN
with PNPXABKR = 'US'
with PNPTIMRA = 'X'
with PNPPABRP = '10'
with PNPPABRJ = '2003'
with PNPPERNR-LOW = '100750'
with PNPPERNR-LOW = '109202'
with PNPPERNR-LOW = '100255'
with PNPABKRS-LOW = 'US'
with SCHEMA = 'ZUSP'
with RADI_EDT ='X'
with EDT_VARI = 'CUS&SAP_US'
with TST_ON = 'X'
EXPORTING LIST TO MEMORY and RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject       = ABAPLIST
EXCEPTIONS
   NOT_FOUND        = 1
   OTHERS           = 2.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
    list_index         = -1
TABLES
    listasci           = asci_tab
    listobject         = ABAPLIST
EXCEPTIONS
    empty_list         = 1
    list_index_invalid = 2
    OTHERS             = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

How to make error message as warning message

how to make error message as warning message? ie i get error message hence cannot save the slaes order   i want to make that error message as warning so that i can save the sales order please help.

Hi
If a message is a custom message, then by changing the message type from E(Error) to W (warning)   we can convert the message type into error message. This is done with the help of development guy. A change in the code is needed.
If it is a standard message, then it depends on whether we have teh access to change the message type. If access is there, then it is possible to change the message from Warning to Error. i.e. If we are capturing std SAP message in our code and displaying then we can change it, else if SAP message is displayed directly, we cant change it.
So, to change it, capture the error message from SAP in some Zcode and then convert that message into a custom message of message type E.
The whole change needs ABAP support.
Try with tcode <b>OVA2</b> settings selecting for sales order or in SAPRO--SD-BF-Log of Incompletion Items
Message was edited by:
        SHESAGIRI.G

How to display error message in abap

How to dispaly error message in report?
i have to check the range bewteen two days and if it is not in range have to display error message only once.
next time if i press the execute button report will get executed without showing the warning message.
i am calculating the days between two dates, i am displaying the error message but if i press the execute button i will not allow me to execute the report.it again shows me the error message.i have to skip this in 2nd time.
can any one suggest what to do with this?

hello suman,
i am using select-option in my report. And i have to check the difference between two dates in select option input box( low-value and high-value). if it is greater then suppose 10 then i have to display warning message at once and then if click on execute button , the report should get executed without showing any warning messages in report.
here i am attaching my source code.please take a close look and tell me where should i have to make change.
SELECT-OPTIONS :s_bedat FOR ekko-bedat.
AT SELECTION-SCREEN ON s_bedat.
IF NOT s_bedat IS INITIAL.
    PERFORM bedat_validate.                       " Perform for Purchasing Document Date Validation
ENDIF.
FORM bedat_validate .                        " Form for Purchasing Document Date Validation
DATA : diffr TYPE i.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis                   = s_bedat-high
      i_datum_von                   = s_bedat-low
I_KZ_EXCL_VON                 = '0'
I_KZ_INCL_BIS                 = '0'
I_KZ_ULT_BIS                  = ' '
I_KZ_ULT_VON                  = ' '
I_STGMETH                     = '0'
I_SZBMETH                     = '1'
   IMPORTING
     e_tage                        = diffr
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED       = 1
OTHERS                        = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    IF diffr GT 31.
      MESSAGE s009(zerrormsg) WITH text-000 DISPLAY LIKE 'W'.
      LEAVE TO LIST-PROCESSING.
    ENDIF.
ENDIF.
ENDFORM.                    " BEDAT_VALIDATE

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

Best Practices Question: How to send error message to SSHR web page.

Best Practices Question: How to send error message to SSHR web page from custom PL\SQL procedure called by SSHR workflow.
For the Manager Self-Service application we’ve copied various workflows which were modified to meet business needs. Part of this exercise was creating custom PL\SQL Package Procedures that would gather details on the WF using them on custom notification sent by the WF.
What I’m looking for is if/when the PL\SQL procedure errors, how does one send an failure message back and display it on the SS Page?
Writing information into a log or table at the database level works for trouble-shooting, but we’re looking for something that will provide the end-user with an intelligent message that the workflow has failed.
Thanks ahead of time for your responses.
Rich

We have implemented the same kind of requirement long back.
We have defined our PL/SQL procedures with two OUT parameters
1) Result Type (S:Success, E:Error)
2) Result Message
In the PL/SQL procedure we always use below construct when we want to raise any message
hr_utility.set_message(APPL_NO, 'FND_MESSAGE_NAME');
hr_utility.raise_error;
In Exception block we write below( in successful case we just set the p_result_flag := 'S';)
EXCEPTION
WHEN APP_EXCEPTION.APPLICATION_EXCEPTION THEN
p_result_flag := 'E';
p_result_message := hr_utility.get_message;
WHEN OTHERS THEN
p_result_flag := 'E';
p_result_message := hr_utility.get_message;
fnd_message.set_name('PER','FFU10_GENERAL_ORACLE_ERROR');
fnd_message.set_token('2',substr(sqlerrm,1,200));
fnd_msg_pub.add;
p_result_message := fnd_msg_pub.get_detail;
After executing the PL/SQL in java
We have written some thing similar to
orclStmt.execute();
OAExceptionUtils.checkErrors (txn);
String resultFlag = orclStmt.getString(provide the resultflag bind no);
if ("E".equalsIgnoreCase(resultFlag)){
String resultMessage = orclStmt.getString(provide the resultMessage bind no);
orclStmt.close();
throw new OAException(resultMessage, OAException.ERROR);
It safely shows the message to the user with all the data in the page.
We have been using this construct for a long time for all our projects. They are all working as expected.
Regards,
Peddi.

How to track Error message no.

Hi,
Could anyone please expalin how to track error messages using message no.
Urgent???????????????????
Reg,
CM

Hi,
You can not track just based on the Message number whether it is Error or Warning Message and where it is effecting.
But for this message number you will have Message class/Application Area Based on this Message class you can check on which area (Masterdata/Purchasing/Inv Mgmt/LIV) this message number is effecting.
Then in SE91 you can enter this Message class then system will show you which area it is related,what is the message number description.
Then in MM IMG Settings you can check message number for that Particular Area.--Define Attibutes for System messages in every area.
rgds
Chidanand

How to send error message to forms from Database Trigger

Hi, Please help me to send error message to forms from Database Trigger?
RgDs,
Madesh.R.M

You are correct, the On-Error trigger is a Forms trigger. However, if your Form is going to display the error generated by the database stored procedure or trigger - you might not see the database error in your Form unless you check the DBMS_ERROR_CODE in the On-Error trigger and manually display the Error Code and associated Text. I've see this happen with a co-worker. The Form she was working on was based on a table with an Before-Insert trigger. Because she was not explicitely handling the error from the Before-Insert trigger in the Forms On-Error trigger, her Form appeared to halt for no reason at all. Once she added code to the On-Error trigger in the Form to handle the DBMS_ERROR_CODE, she discovered the trigger was producing an error and was able to show the error to the user in the On-Error trigger.
I understand the desire to keep as much as possbile in the database, but with that comes some extra coding in your Forms to handle this. This extra coding could easily be placed in a Forms Library, attached to a Form and called in the On-Error trigger. Your code could look like this:
DECLARE
   /*This example assumes you have an Alert defined
      in your Form called: 'ERROR' */
   al_id    ALERT;
   al_text VARCHAR2(200); /* Max text of a Forms Alert message*/
   al_btn   NUMBER;
BEGIN
IF DBMS_ERROR_CODE != 0 THEN
   /* Error code is ORA-00000 Normal Successful completion
       So only handle non-zero errors */
   al_text := DBMS_ERROR_CODE||':'||DBMS_ERROR_TEXT;
   al_id := Find_Alert('ERROR');
   set_alert_property(al_id, alert_message_text, al_text);
   al_btn := show_alert(al_id);
END IF;
END;Your original question was "How to send error message to forms from Database Trigger?" The answer is you don't because Forms already gets the database error code and database message through the Forms DBMS_ERROR_CODE and DBMS_ERROR_TEXT functions. Look these up in the Forms help and it should clear things up for you.
Craig...
Edited by: CraigB on Jun 14, 2010 4:49 PM
Edited by: CraigB on Jun 14, 2010 4:49 PM
Edited by: CraigB on Jun 14, 2010 4:50 PM
Edited by: CraigB on Jun 14, 2010 4:51 PM
Edited by: CraigB on Jun 14, 2010 4:51 PM

How to solve error -1450?

I have been re-installed iTunes, and it keeps pop-up with the error -1450 ( cannot save music library ), and it reloads all the playlist each time I switch on the computer and open iTunes.
I have been re-install iTunes after the error appear, and it seems although I have re-install iTunes, the problem doesn't solve and keeps repeat.
For any kindness, please tell how I can fix this error, as I cannot find any articles on support page about this.
Thanks

Does anyone know how to solve error 1450 or even what
caused it!? This problem is killing me.
I found this by doing a search on Google for "Error 1450": http://support.microsoft.com/kb/236964/EN-US/

How to solve error message in webui

Similar Messages

Maybe you are looking for