How to solve "error occurred in the data manipulation engine"? 64bit Windows 7

Hi all
I'm having quite a testing time here trying to use the new SAP PA 2.0. After installation the software launches, the Automated Analytics seems to work fine but not the Expert Analytics.
Steps as follows:
Launch PA
Choose and launch Expert Analytics
Choose Try with Samples
Open the Dairy Wholesaler file
Error: An error occurred in the data manipulation engine. Check the manipulation parameters. (HDB 01001)
I also get this same error when I try to create my own New Dataset.
I’m on 64bit Windows 7 Pro
Is there anyone who knows how to solve this problem. I've searched the SCN and online and have tried the following:
1. Uninstall and re-install. Doesn't help
2. Uninstall and delete old lumira related folders on the C drive e.g. the SAPPA and SAPVI folders on the C drive, then re-install.
Much appreciated if anyone could shed some light on this. I've previously had Lumira working with no issues. I've since uninstalled Lumira, Predictive Analytics, and Infinite Insights (as PA 2.0 is all of this combined)
Regards
Ria

In case anyone has the same problem, I found the the following helpful (taken from Error after upgrading to 1.18 ). The solution is for Lumira however its the same steps for PA2
1. You might want to try a ‘clean’ uninstall / reinstall . After uninstalling, try deleting these folders:
C:\Users\Public\sapvi
C:\Users\<user>\AppData\Local\SAP\Lumira
C:\Users\<user>\AppData\Local\Temp\sapvi
In this step I searched for every SAP related file in AppData in the Public, User, and my own username folder under \Users\
2. Next, to launch the application, explicitly click "Run as Administrator" on the install file

Similar Messages

Error occurred in the data selection,If i do Repeat, then it is working fin

Hi Freinds,
Here is the error message,
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Details Tab:
Extraction (messages): Errors occurred
Error occurred in the data selection ....
If i do Repeat Delta, then it is working fine.
As it is a daily load, manually repeating the load from the past 10 days.
Have tried using program RS_TRANSTRU_ACTIVATE_ALL.
Any inputs pls.....

Hi Friends,
Thanks for your valuable inputs, Problem is solved.
The Reason is that, there is a time difference in the r/3 system and bi system.
The tolerable time differene shud be only 60 seconds.
Basis guys took down time at the OS level and hav made the timers sync.....
The problem is on the source system GNP time differences
persists, which can cause the problem with delta upload .
Universal Time Coordinated UTC....: 1291187626
Date and time of database.........: 01.12.2010 12:46:59
Date and Time of R/3-Kernel.......: 01.12.2010 12:43:46
Date and Time of ABAP-Processor...: 01.12.2010 12:46:58
ABAP Time zone Setup ..............: 19800
Date and Time / local time ........: 01.12.2010 12:43:46
This leads to an exception of the delta processing, because this
tolerates a deviation of 60 seconds only (When the repeat is processed,
the "local time" in the ABAP is higher than the qrfc counter at the time when the delta was processed -> So a repeat works fine).
Please synchronize the timers like described in attached note 101726 and 741734 to eliminate the time difference .
With Regards
Badri Thiriveedhi.

Error in data loads-Error occured in the data seletion

Hi,
We have to do an init load for Period 10 from data source 0EC_PCA_3.
When the period changes we usually copy the previous infopack and change the fiscal yesr period and do an init load.
This time we have to change the fiscal period to 010, we created a new info pack but the fiscal year period we forgot to change and was 009 and scheduled a init load.
The load failed with error mesg IN EXTRACTION PART:
1) syntax error in RSCDELTA
2) Error occured in the data selection -RSM 340
REQUEST part in monitor screen is green.
TRANSFER part in monitor screen is green
EXTRACTION shows:
Data request received ---green
Data selection scheduled -
green
Error occurred in the data selection -
RED
Processing (data packet): No data ---RED
We deleted the red request in the ods , deleted the init load in scheduled -init for source system --- chnaged the fiscal yesr period to 010 and triggered a new load but again it gives the same error mesg.
How to rectify this and do loads to the target successfully.
Please suggest

Please check the job log in the source system. It will give you the exact reason why extraction is failing. You need to act accordingly.
Thanks..
Shambhu

Error message :"Error occurred in the data selection"

Hi All ,
When I am exracting a Delta from source I am getting this error mesage Error occurred in the data selection" can any one let me know how to slove this,
Thanks in Advance.
rao

Praveen,
In SM 37
In JobName i have given - *REQU_4683BBF4HXG4XW4ASQOSP6PJG
where REQU_4683BBF4HXG4XW4ASQOSP6PJG is Request no
User Name is -- *
then I had check all these
sched, Released, ready, active, Finished, cancelled
then executed
then i received the message no jobs are matches the selection criteria
thanks
prasanna

Error occured in the data selection while extract data from Source system

Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With error

Hi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star

Process chains-Error occurred in the data selection-DBIF_RSQL_TABLE_UNKNOWN

Hi All,
The problem occurred in PC which was running smooth until now
Now I am getting message:
in BI : Error occurred in the data selection
When I went in R/3 it shows DBIF_RSQL_TABLE_UNKNOWN
Probably the only way to eliminate the error is to correct the program.
Please check the entries in the system log (Transaction SM21).
Internal call code.........: "[RSQL/READ/PA0009 ]"
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
DBIF_RSQL_TABLE_UNKN
SAPLXRSA" or "ZXRSAU
EXIT_SAPLRSAP_002"
Can anyone explain..

Hi ,
Check note 950317.
also check the blow forum having same kind of discussion :
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
Short dump error DBIF_RSQL_TABLE_UNKNOWN
DBIF_RSQL_TABLE_UNKNOWN
thanks,
Deepak

"Error occurred in the data selection" on init delta load ODS- InfoCube

Hi, gurus and experts!
I'm trying to do Init delta load from 0FIAR_O03 ODS into 0FIAR_C03 InfoCube in PRD env. by InfoPackage "Initialize with delta transfer (with data transfer)". Immediately after the load was started I got error
"Error occurred in the data selection"
with details
"Job terminated in source system --> Request set to red".
Where are no any short dumps. There are 1 activated init load in ODS - nearly 6 500 000 records.
Any ideas about error? And the way I can load data?

Hi Gediminas Berzanskis,
I faced the similar error when I tried to load data from an ODS which contained huge amount of data to a Cube. Even in your case the volume of data is more (around 6.5 million records). The error could be due to the table space issue, please contact your Basis team to check if enough table space exist for both the data targets.
Meanwhile you may also check the RFC connection of the Myself source system.
You can replicate the DSO datasource once and then reactivate the transfer rules using the program RS_TRANSTRU_ACTIVATE_ALL.
Try load with a small amount of data with a Full load option and then with a delta option..
Hope this Helps,
Prajeevan (XLNC)

Error occurred in the data selection

Hi Expert,
I met issue when full loading data from R3 via customized datasource.
the error message in request monitor is:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
I checked in RSA3, the data extraction is successful, but in BW, when execute the infopackage with or without data selection, both failed due to the same error.
I also checked the background job in SM37 in source system, the background BI* completed successfully, and the IDoc in both BW and source system processed successfully.
I also tried to replicate datasource and activate is using RSDS_DATASOURCE_ACTIVATE_ALL, delete infopackage and recreate it. but seems all this didn't work.
Could u pls tell me how to solve this issue? Thanks.
Eileen

Hello Eileen zhang,
I have exactly the same error as you, do you still remember how did you solved this problem?
Regards,
Thanks,
Maria João
Error message:
"Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request."

Error occured in the data selection...urgent

Hi,
The master data(full update) is being pulled from R/3 to BW..while pulling it has thrown the error as below.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
when i checked in the error message it is showing as below
Incomplete control parameter for commmunication with the BW system
Errors in source system
The detailed error message is as below..................
Diagnosis
The control parameters for communication with the BW server are not
    complete. A BW PlugIn upgrade could be the cause of the problem.
System response
Procedure
Depending on the Release of the BW server, proceed as follows:
    BW Server Release 1.2B: Source system: Update InfoSource metadata
    BW Server Release >= 2.0A: Source system: Activate
I have spoken with basis they told that they have done Kernel updation for BW..please help me in resolving this ..
I have reran the infopackage still it is showin the same error..its very urgent
thanks in advance..points will be assigned..
regards,
Manjula

Hi Manjula,
May be that this the Partner profile settings problem....
Please check your partner profile settings in source system...
Login the sources system > goto Tcode:WE20 select the BW system>
check the all the settings one by one...
Thanks
Regards
Sathis
If it is useful assign the points...

Error 1935 - Adobe Reader (11) - An error occurred during the installation of assembly component - Windows 7

NOT RESOLVED
It seems to be a problem with my windows installation. I will re-install at a later date since installing PDF viewing programs the only issue.
Problem:
While installing Adobe Reader XI using the install_reader11_en_mssd_aaa_aih.exe from Adobe Reader Install for all versions and AdbeRdr11000_en_US.msi from a forum post on here. Error 1935 occurs using both installers and causes the setup to fail and initiate rollback.
Additional information:
In Programs & Features list there is no adobe reader as you can see:
This is pretty much a clean install of windows on which I have installed: Adobe Flash Player (16), Steam + some games, Chrome, Skype and some Visual C++ Redistributables, .NET Framwork, Drivers for GPU, CPU, Motherboard and USB devices.
Error:
Error 1935. An error occurred during the installation of assembly component
{B708EB72-AA82-3EB7-8BB0-D845BA35C93D}.
HRESULT: 0x80070308
System:
Windows 7 x64 - installed on a SSD.
Motherboard: ASRock Z97 Extreme 4
GPU: Gigabtye - G1 Gaming GTX 970
CPU: Intel Core - i7 4770K @4.00 GHz
RAM: 16GB Kingston Hyper X (8x2)
Steps taken:
1. I have cleared the transaction log using command prompt with the following command:
fsutil resource setautoreset true C:\
Restarting the computer and trying to install Adobe Reader 11 results in the same error.
2. Restarting the computer, disabling Malwarebytes Anti-Malware and installing Adobe Reader 11 results in the same error.
3. Chrome has "allow all sites to run JavaScript" checked.
Thanks
Edit:
I have attempted to install an earlier version (10.1.4) of Adobe Reader - Same error occurs.
Edit 2:
I'm going to look for some alternatives for the mean time
Edit 2.1:
These alternative programs are failing to install as well. Multiple errors, I now assume the issue is with my windows installation.

Hi Kanker ,
Please refer to the following link and see if it helps.
https://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html
Let us know with your response .
Stay well.
Regards
Sukrit Dhingra

Error occured when installing SAP J2EE engine on windows xp

hi guys,
I received the following error while installing the sap j2ee engine.
Program is starting... Please wait!
Starting standalone GUI using:
SAPinst port : 21200
HTTP port     : 4239
GUI style     : wizard
GUI mode      : normal
command       : "D:/DOCUME1/G33241.SUN/LOCALS1/Temp/sapinst_exe.4860.1271751300/jre/bin\java.exe" -cp "D:/DOCUME1/G33241.SUN/LOCALS1/Temp/sapinst_exe.4860.1271751300\jar\instgui.jar" -Xmx256M -Dsun.java2d.noddraw=true -Dsap.env.var.javahome=SAPINST_JRE_HOME SDTGui instwizard host=localhost port=21200 -nolock
load resource pool D:\Henkel\SDN_Preview_SR_5\JEECE71SR5\JavaEE\resourcepool.xml
guiengine: No GUI server connected; waiting for a connection on host B6A-7F-479-LTP, port 21200 to continue with the installation
Apr 20, 2010 1:45:15 PM [Info]: *************************
Apr 20, 2010 1:45:15 PM [Info]: Starting Server
Apr 20, 2010 1:45:19 PM [Info]: Reading server configuration.
Apr 20, 2010 1:45:20 PM [Info]: Reading service configuration InstallationWizardService.
Apr 20, 2010 1:45:20 PM [Info]: Configuring LogManager ...
Apr 20, 2010 1:45:20 PM [Info]: *************************************************
Apr 20, 2010 1:45:20 PM [Info]: Starting SL Controller ...
Apr 20, 2010 1:45:20 PM [Info]: StorageService switched off.
Apr 20, 2010 1:45:20 PM [Info]: Initializing SecurityManager ...
Apr 20, 2010 1:45:20 PM [Info]: Key Store management switched off.
Apr 20, 2010 1:45:20 PM [Info]: Configuring HTTPManager ...
Apr 20, 2010 1:45:25 PM [Info]: WebstartService switched off.
Apr 20, 2010 1:45:25 PM [Info]: RoleService switched off.
Apr 20, 2010 1:45:25 PM [Info]: AlertService switched off.
Apr 20, 2010 1:45:25 PM [Info]: NotesService switched off.
Apr 20, 2010 1:45:25 PM [Info]: ProcessService switched off.
Apr 20, 2010 1:45:25 PM [Info]: Starting MIDService ...
Apr 20, 2010 1:45:25 PM [Info]: Starting FileService ...
Apr 20, 2010 1:45:25 PM [Info]: LogService switched off.
Apr 20, 2010 1:45:25 PM [Info]: MailService switched off.
Apr 20, 2010 1:45:25 PM [Info]: Starting services ...
Apr 20, 2010 1:45:25 PM [Info]: Starting service "InstallationWizardService" ...
Apr 20, 2010 1:45:25 PM [Info]: Service "InstallationWizardService" started
Apr 20, 2010 1:45:25 PM [Info]: Services started.
Apr 20, 2010 1:45:25 PM [Info]: Starting HTTP server listening on port 4239 ...
Apr 20, 2010 1:45:25 PM [Info]: HTTP server started.
Apr 20, 2010 1:45:25 PM [Info]: SL Controller started.
Apr 20, 2010 1:45:25 PM [Info]: Starting GUI ...
guiengine: 2010-04-20 13:45:28 Login in progress
guiengine: 2010-04-20 13:45:28 Login successful
Apr 20, 2010 1:45:29 PM [Info]: GUI started.
INFO       2010-04-20 13:45:33.91 [synxcpath.cpp:811]
           CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\x.
INFO       2010-04-20 13:45:33.91 [synxcfile.cpp:417]
           CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
           lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\x.
INFO       2010-04-20 13:45:35.544 [synxcpath.cpp:811]
           CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\x.
INFO       2010-04-20 13:45:35.544 [synxcfile.cpp:417]
           CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
           lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\x.
INFO       2010-04-20 13:45:35.591 [synxcfile.cpp:417]
           CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
           lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\dev_sap_kernel.
INFO       2010-04-20 13:45:38.294 [synxcfile.cpp:717]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/statistic.9.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
           lib=syslib module=syslib
Copied file 'C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/statistic.xml' to 'C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/statistic.9.xml'.
INFO       2010-04-20 13:45:39.591 [synxcfile.cpp:717]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/statistic.10.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
           lib=syslib module=syslib
Copied file 'C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/statistic.xml' to 'C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/statistic.10.xml'.
WARNING    2010-04-20 13:45:47.606 [synxcpath.cpp:961]
           CSyPath::getOSNodeType(bool ) lib=syslib module=syslib
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation. Operating system error message: The filename, directory name, or volume label syntax is incorrect.
INFO       2010-04-20 13:45:52.513 [synxcfile.cpp:717]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/inifile.4.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
           lib=syslib module=syslib
Copied file 'C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/inifile.xml' to 'C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/inifile.4.xml'.
/**** here some things are there ***/
while creating the users for the SAP system it is giving the following error(4th step in the installation)
INFO       2010-04-20 13:46:04.872 [synxcfile.cpp:717]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/statistic.11.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
           lib=syslib module=syslib
Copied file 'C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/statistic.xml' to 'C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/statistic.11.xml'.
INFO       2010-04-20 13:46:04.919 [sixxcstepexecute.cpp:795]
Execute step createAccounts of component |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|3|0|NW_Users_Create_Do|ind|ind|ind|ind|4|0
INFO       2010-04-20 13:46:07.544 [ianxbusprv.cpp:142]
           CIaNtUserPrivileges::add_impl(., B6A-7F-479-LTP\SDB Operators, )
Nothing to do. User privileges are an empty string.
INFO       2010-04-20 13:46:07.591 [ianxbusprv.cpp:142]
           CIaNtUserPrivileges::add_impl(., NT AUTHORITY\LOCAL SERVICE, )
Nothing to do. User privileges are an empty string.
WARNING    2010-04-20 13:46:07.716
           CJSlibModule::writeWarning_impl()
Existing account GDNINDIA\g.sundara is not a member of group B6A-7F-479-LTP\Users. Changing membership of account.
INFO       2010-04-20 13:46:07.935 [synxcgroup.cpp:771]
           void CSyGroupImpl::addMember(CSyAccountImpl * pAccount)
           lib=syslib module=syslib
Account GDNINDIA\g.sundara added to group B6A-7F-479-LTP\Users.
WARNING[E] 2010-04-20 13:46:07.935 [ianxbusprv.cpp:226]
           CIaNtUserPrivileges::add_impl(., GDNINDIA\g.sundara, SeServiceLogonRight)
FSL-06002 Error 123 (The filename, directory name, or volume label syntax is incorrect.
) in execution of a 'NetServerGetInfo' function, line (201), with parameter (., 101).
WARNING[E] 2010-04-20 13:46:07.935 [ianxbusprv.cpp:286]
           CIaNtUserPrivileges::add_impl(., GDNINDIA\g.sundara, SeServiceLogonRight)
MOS-01224 Unable to add privileges 'SeServiceLogonRight' to account 'GDNINDIA\g.sundara' on host '.'.
WARNING[E] 2010-04-20 13:46:07.950
           CJSlibModule::writeError_impl()
MOS-01224 Unable to add privileges 'SeServiceLogonRight' to account 'GDNINDIA\g.sundara' on host '.'.
ERROR      2010-04-20 13:46:07.966 [sixxcstepexecute.cpp:958]
FCO-00011 The step createAccounts with step key |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|3|0|NW_Users_Create_Do|ind|ind|ind|ind|4|0|createAccounts was executed with status ERROR .
please guide me..i have been trying to install this from so many days and i had no luck at all..
So please help in avoiding this error or tell me the proper steps to install the sap j2ee engine.

actually the problem is i am logging in a company system, which is using a GDNINDIA domain... the installation requires a local admin without any domain..
anyways guys thanks...
one more question is one of my fellow team mates is getting:
Connection to SAPinst could not be established.
could not connect to host localhost on port 21200
Please help

Error occurred in the data uploading from Flat File in BPC NW

Hi,
I am doing Migration project from BPC MS to NW.
In this i am loading data from flat file to BPC NW. One error occured in this process that is Record Duplication.
Total 17000 records in that 7000 recards rejected by the reason of duplication.
The Information about Package Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/CONVERT completed in 2 seconds
/CPMB/LOAD completed in 7 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
FILE= DATAMANAGER\DATAFILES\Aprilmayjun_2011_Budget_V1.CSV
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\ZAPRMAYJUN_2011BUDGET.xls
CLEARDATA= No
RUNLOGIC= Yes
CHECKLCK= No
[Messages]
Task name CONVERT:
No 1 Round:
Record count: 17064
Accept count: 17064
Reject count: 0
Skip count: 0
Task name LOAD:
Reject count: 7230
Submit count: 9834
Application: CorpBudget Package status: WARNING
Could you help me in this at the earliest.
Thanks and Regards
Krishna

Hi,
You cannot send the duplicated with the standard import package. You need to create or add a new package and link to /CPMB/APPEND process chain and do the import. This would consider the duplicate entries also. It looks like you need somehow load all the records including the duplicate ones.
So on excel go to Manage Data -> Maintain Data management -> organize package list and add a new package and link to the standard BPC process chain /CPMB/APPEND.
Thanks,
Sreeni

Extraction Error: ERROR occured in the data selection

Hello everybody,
I have made configurations for the BW connectivity. Finally I was able replicate data sources from R/3 to BW. But when I try to extract the data its giving me the error. In monitor details, in extraction node its showing like "Error occured in data selection."
Its not giving me any more messages. I think the problem is with the BW connectivity configurations. Its my guess only. Is that right? But I am able to replicate my data sources.
Please help me.
Thanks in advance.

Hi:
1)Try the RSA3 extractor in R/3.
2)Try simulate load in InfoPackage.
If RSA3 is good, and infopackage is giving error, then its connectivity.
Also, create another infopackage and try again just to make sure.
Ram Chamarthy

Error occured for the data source 0uc_isu_27

Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
Incomplete control parameter for commmunication wi
Hi everybody,
At the time of loading data in to the BW side for the datasource i got an error message.Actually in the source system this data source is extracting the data records. But in the BW side it is giving error. Please help me on this issue. Here i am mentioned the error message actually i got...
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Source System . You can get here using the BW Monitor.
Removing errors:
How you remove the errors depends on the error message you receive.

Hi Dinesh,
I observed at R/3 side it is showing the error
Error message text:
Incomplete control parameter for communication with the BW system
status text:
Application document not posted
Coming to BW side it is giving at RSRQST:
IDOC sent to R/3 system or external program
Status text:
IDOC sent to R/3 system or external program
Thanks
Satya

Error occured in the data selection ...

Hi experts,
I have included a delta info package into a process chain.
But when i checked the process chain, it was showing an error
in the data store activation step as follows:
============================================
Diagnosis
DataSource 8YRTODSON does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 06.06.2008 13:34:56.
The time stamp in the BW system is 12.07.2007 12:33:40.
I appriciate your help on this.

Still the same.
1. i have deleted the bad requests from the cube.
2. replicated the data source.
3. activate the transfer structure.
4. and then loaded the data,
But still i am getting the same error message.
Thanks...

How to solve "error occurred in the data manipulation engine"? 64bit Windows 7

Similar Messages

Maybe you are looking for