How to solve Firefox update error message?
12MAR14 0428 - I am running Firefox 10.0.2 on XP SP3 but, the non-admin users keep getting this annoying message "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." The solution I have found to solve this on a previous version, does not work for this Firefox release. Has anyone who had this issue found a solution for this bothersome problem?
Well, that did not work either.
12MAR14 1152 - Removed and Installed Firefox 11 twice and, so far got the same result - the update message keeps popping up on non administrator user accounts!
Is it a bug? Someone already asked why a non-admin user account is given the opportunity to attempt a software update?
Similar Messages
-
Firefox update show up an error message stating that "There was an error when checking for updates"! The phone i am using is a Firefox Intex Cloud Fx running firefox OS 1.3 Spreadtrum processor and the code name of the phone is Tarako!
Hi ram19890,
Congratulations on your new Firefox OS device! After reviewing your issue it is suggested that you contact your carrier for more help with your issue.
Further information can be found [[Firefox OS Carrier Support Contact Information|here]]
Also to not sound like a robot, there do not seem to be updates available for that device.
Thank you, and if you have any other questions, we are happy to help. -
In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.
Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling -
After last automatic update, error message XUL Runner error platform version 6.0.2. is not compatible with min Version 6.0.1 maxVersion 6.0.1 appeared every time I try to open/run Mozilla Firefox.
See:
*[[/questions/869812]]
*[[/questions/869951]] -
TS1702 In plain english how do you download past error message 0x800B0101
In plain english how do you download past error message 0x8ooB0101?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
https://support.mozilla.org/kb/Server+not+found
https://support.mozilla.org/kb/Firewalls -
I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
Two things:
1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......". I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
Obviously it will fit.
What am I doing wrong, all of a sudden?Hey ryclark,
Thanks for responding. Something else is going on here.....
Here's what I re-replied to our friend...
Thanks for the response.
When I built this computer last Nov/Dec, it was built with the second
fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's running
Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard
drive space. It is set up with 64 bit. I had been using Audition CS3 for many
years and even go back to it's origin: Cool Edit and Cool Edit Pro. My
learning curve was minimal, sans the CD burning, which I used other software
for which is now antiquated, so I need Audition for this. Between this and
IZotope 3 I've repaired and improved many a recording. All-in-all extremely
useful software.
As for the idea "to burn it anyway", well the error message comes up and
that's it - if I "X" out of that message and try to burn again the message
comes back - so Audition will not let me. It is convinced that this file is
longer than it really is, but only when I add track marks to it!
There are only 11 tracks.
I was able to burn a CD of this same file but without all the track marks,
so the same exact file length/size will burn, only as the one track.
I've also succeeded in burning other WAV's , both greater and smaller, with
and without multiple track marks, without issue. Of course all with less
than the CD's max. capacity.
This problem seems to be with this one file. I've even re-made/re-recorded
the file from scratch with no change. There's something else going on here
that I can't put my finger on. (I am "recording" LP's and making personal
CDs of them)
Also, only from time to time, I have another error after burning a CD that
states it could not verify the CD. For this I assume it is the blank rather
than AA? The first might burn without issue and with the second burn I
get the error. It is near the end of a stack of blanks, so.....
As for the need to "mark the end" of the file makes a lot of sense but of
all the other CD track-marking software I've used, none needed one to do
this, but this IS Adobe after all.
You'd think there might be a smidge of intuitiveness with Adobe, but maybe
not.
- Mark
In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time,
[email protected] writes:
How to solve Audition CS6 error "The amount of audio to burn will not fit
on the CD........."?
created by ryclark (https://forums.adobe.com/people/ryclark) in
Audition CS5.5, CS6 & CC - View the full discussion
(https://forums.adobe.com/message/6605916#6605916) -
how do I fix an error message of "failed to open a session on this devices" for my HP photosmart 6510 scanner?
Hello Kwastfamily,
It sounds like you are unable to print from your computer to your printer. I would run through the troubleshooting steps in this article:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Steps followed: all Adobe products (CS6 Suite and CC) have been removed (w/uninstaller and manual Library cleanup) and reinstalled (from discs and downloads); permissions corrected as per KB note on Error 16, to no change. This occurred after updating Mac OS to 10.9x. The OS was then reinstalled, new admin & standard users created (MacPro hardware passes all tests). "Error 16" permission solution performed at every stage to no change in error generation. Adobe Reader, Lightroom 4, and CS6Bridge do launch, but Acrobat Professional, Photoshop (13, CS6), and CC Photoshop stop launch w/error 16. Stumped!
Thanks for the suggestion, Gene, but it had no affect on the ³error 16²
situation, I¹m afraid. I think I¹m going to have to start with a new drive
and import/update until I find the source of this issue.
Jim
"Error 16" solution doesn't solve problem, same error message pops up.
Further steps?
created by gener7 <https://forums.adobe.com/people/gener7> in Photoshop
General Discussion - View the full discussion
<https://forums.adobe.com/message/7154907#7154907>
Permissions problem. Open Terminal and copy/paste this line: sudo chmod -R
777 /Library/Application\ Support/Adobe Gene
If the reply above answers your question, please take a moment to mark this
answer as correct by visiting:
https://forums.adobe.com/message/7154907#7154907 and clicking Correct¹ below
the answer Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
Please note that the Adobe
Forums do not accept email attachments. If you want to embed an image in your
message please visit the thread in the forum and click the camera icon:
https://forums.adobe.com/message/7154907#7154907 To unsubscribe from this
thread, please visit the message page at
, click "Following" at the
top right, & "Stop Following" Start a new discussion in Photoshop General
Discussion by email
<mailto:[email protected]> or
at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=4694> For more information about maintaining your forum email
notifications please go to https://forums.adobe.com/thread/1516624.
> -
how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"
It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.
-
HOW TO SOLVE THE R6034 ERROR IN ITUNES INSTALATION
I need toknow how to solve the R6034 error in itunes instalation becouse y can´t buk up muy phone
How to solve this ?
#import <UIKit/UIKit.h>
int main(int argc, char *argv[]) {
NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
-> int retVal = UIApplicationMain(argc, argv, nil, nil);
[pool release];
return retVal; -
How do I fix -50 error message when syncing phoneon Windows 7?
How do I fix -50 error message when syncing phone on Windows 7?
Quit Mail. Back up all data.
Triple-click the line of text below to select it, then copy to the Clipboard:
/Library/Mail/Bundles
In the Finder, select Go ▹ Go to Folder from the menu bar. Paste into the box that opens, then press return.
A folder may open. If it does, move the following item in that folder to the Trash:
UnsubMailPluginMailAppOSX.mailbundle
You may be prompted for your password when you do this.
Launch Mail. -
How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.
Hi j,
I don't know if this will work, but I'd try logging in to an admin account, going to your main library (not user library), opening it, opening Application Support, selecting iPhoto, hold down the command key and press i, click on the lock in the lower left, entering the password and making sure you have Read & Write privileges for System and Admin. -
How do I fix this error message??
How do I fix this error message
"This message could not be delivered and will remain in your Outbox until it can be delivered.
The SMTP server "smtp.mac.com" doesn't support TLS (SSL) on port 25. Please check your account settings and try again."
ThANK YOU!!!
RichMail Help has some articles devoted to sending problems, e.g. “I can't send email” or “I can't send email because the connection to the server on port 25 timed out”. You may want to take a look at them in case there is something there that applies to you.
Something that usually works if you’re trying to use an outgoing (SMTP) server different from the one provided by your ISP (and in the case of .Mac in particular) is changing the outgoing server port to 587 instead of 25 in Preferences > Accounts > Account Information > Outgoing Server Settings. -
How front end query invoke error message at backend
Dear all,
Please help me this out! I'm working on servlets(using Apache server). I'm sending sql statement to (dbaccess) database. If I do a sql statement directly at backend, the db will generate an error message. Now I'm sending the query at front end. When error occurs, the backend doesn't show the error message. I have no idea how to 1) generate the error messages at backend when a sql from front end is executed. 2) And then how the backend send the error message to the frontend.
If you have any idea, please help me. I greatly appreciate that!
Regards,
GraceThanks. Backend means database. But I just wonder why this exception not shown on my webpage. I made it to print out in html file.
And are you sure that the exception front end caught is the same error message that I get if I run the sql statement at backend directly? Because I'm thinking of ways to make the error message both detail and user friendly to understand.
What would you think?
Thanks again!
Grace -
I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?
Hi Brizill,
Please refer to the help document below to understand the technical specifications for the same:
System requirements | Photoshop
Regards,
Sheena
Maybe you are looking for
-
Why am I being charged to update apps that I know were free?
I have several apps that I've downloaded that I know are free 100% and even ones I've had for years, but since updating to a whole new phone, things aren't acting right. Every time I try to update these apps, I get this thing where I have to sign in
-
I just purchased a mac mini. I can't download the updates for iTunes or iMovie. I'm prompted to use my Apple ID to log in. The agree button is grayed out on the terms page. I clicked on "I've read the terms and conditions" so I don't know what the
-
Hi error log in call transaction
How did you handle errors in Call Transaction? Among the Call Transaction and Session Method, which is faster?
-
No multiple tabs preview in Windows 7 (worked fine in 4.0b8)
Under Windows 7, it was possible in Ffx 4.0b8 to see a preview of all tabs in the windows taskbar and select a tabs from the preview to show it. It was usefull, for example, only to check if the iGoogle page updates and there is new mail or this kind
-
2 seperate app spree's, 8/9 approved!!@!
Ok, so I came out of the garden prematurely. Was suppose to garden until Nov or Dec 2015 but got anxious because there were still some cards I wanted. App'd for Chase, Amex ED, Discover It and Abercrombie & Fitch (because my son loves that store). Ap