How to Solve "General Error: Out of memory"

Hi all experts,
I have this "weird" error which I encountered for the first time.
I converted a AVCHD file from my SD card (in mts) to .mov format using clipwrap. I played the resultant .mov file using Quick Time and it plays smoothly without any problem.
Now, I imported this .mov into FInal Cut and it appears into my project panel. Then I click on this file expecting to see the video in the Viewer Window but it doesn't. Instead, an message saying "General Error: Out of Memory" appeared on the Viewer Window.
Then, I tried another method by draggin rhis file from the project panel straight into the timeline. When I put my CTI onto it in the timeline, the video appears on the Canvas window but when I press the spacebar, the movement of the video is very jerky.
Both the sequence settings on the video & sequence are matching at 1920 x 1080.
Any idea what is going on ?
Thanks

MartinR wrote:
Did you convert the AVCHD video to QuickTime using _Apple Intermediate Codec (AIC)?_
(.mov files are QuickTime, but the video codec inside would be H.264 if all you did in Clipwrap was convert .mts to .mov without also specifying conversion to Apple Intermediate Codec. A QT/H.264 video file would be playable in QuickTime but could not be edited in FCE. Needs to be QT/AIC.)
Suggest checking (and let us know) what your clip & sequence properties are.
Thanks Martin.
And you are right ! The clip converted from clipwrap is QT/H.264. But how do I instruct Clipwrap to convert it to QT/AIC ?
Also, how come Final Cut classified this as an "Out of Memory" error ?
Thanks

Similar Messages

General Error - Out of memory when viewing clips

Hi All. I have a problem.
Right, I have 720p clips, about 5-10 minutes long each, 100-150mb in size. I roughly have about 180 of these clips. Now some of the clips can be viewed, others (most) cannot. Everytime I click to view them, it brings up the error out of memory message. All clips and the project are being done on an external HD (1TB)
I've attempted to start a new project on the Mac HD, same issue (with the clips still on the external HD) and I've also tried only putting one clip in with the same error message.
How can I resolve this issue?
Cheers
Tony

Don't convert to DivX, that's not an editing codec either.
Read my MPEG Streamclip tutorial: http://www.secondchairvideo.com/?p=694

Multiclip Nightmare: General Error/Out of Memory when trying to match frame

I'm an assistant editor on a reality show and am fairly experienced with Final Cut Pro. But I've never seen something like this.
At our post house, we have over 30 Macs running FCP7, streaming media off a Xserve/Promise RAID SAN via Fiber channel. We create multiclips for everything (it's a reality show) and have run into some weird bugs.
What's happening is that mutliclips will all-of-a-sudden be unable to match back to the original multiclip. It gives a General Error then an Out of Memory error. Sometimes, after those errors, FCP immediately quits. When I double click the clip in the timeline, I get the same general error. I can, however, match back to the original media clip. But matching back to the multiclip causes the error.
I can't pinpoint a cause or common element. It's happening to different episodes with different editors and different project files.
Also, randomly, things will go offline for no reason. And not everything in a timeline, just some things (which makes no since). We can reconnect them quickly since the media drive never went offline in the first place. I mention this because but I'm wondering if both of these problems are common symptoms of corrupt multiclips and if there's a way to fix them. The only element that I can find linking media randomly going offline is that these multiclips had subclips embedded in them. But even that doesn't seem to be a common thread.
These timelines have been passed around from story editors to editors to AEs then back to editors, so we're thinking these multiclips might be getting corrupted through that process. I don't understand why because everything's looking at the server and all the Macs are pretty much identical.
What I began to do was recut in each clip on the editor's timeline with the original multiclip. It fixes the problem but it's beyond time consuming to say the least. Now that these errors have come up three times in different places, I'm worried we have a widespread problem and if there's a better way to fix it.
Details:
We transcoded all the DVCPRO tapes with AJA Kona Cards to NTSC ProRes (LT) with plans to online the show once we lock
Everyone's running the latest FCP7 and Snow Leopard release

Nate Orloff wrote:
It seems that FCP is making HUGE multiclips. I'm guessing that's the source of the memory error. Some multiclips (the ones it'll let me open) are 9 hours long.
Interesting... Could be the source of your problem indeed
And for no reason.
Are you sure there's no reason? When making multilips there's not one clip's timecode passing 00:00:00:00 for exemple? Or a small clip is also selected with a complete different Timecode? Is it black all 9 hours long? etc.
There must be something that is causing these long multiclips.
I agree with Tom (down in this thread) that sending apple feedback with as much detail as possible might be helpfull.
[FCP feedback|http://www.apple.com/feedback/finalcutpro.html]
I would also be interested in an XML of one of the culprit clips. Not that I know answers, but looking at it might give some clue.
Please select one of the wrong multiclips (in the browser). Select File > Export > XML. (version 5, include metadata; Please also make a version 4 XML).
Send both XML to my email address (in my profile; click on my name in the left column of this post). No promises But you never know...
Rienk

General error:out of memory. what am i doing wrong?

My free agent 721.5 GB free space, I have set my system settings all the the free agent memory. I have been working on a project with 3 sequences in them,JPEG, clips Mp4 . and had no problem playing them, editing them. Until now.... .. my minimum auto allowable free space on scratch disk is set to default: 2047 MB when I try to open my sequence says : general error.... I click ok, then another window opens saying, out of memory. my project opens, but only one sequence opens. the others have been edited more. plus The main video will not open. what am I doing wrong?

productivity wrote:
So I have been successfully able to edit my jpeg and .Mp4 in FCP. Its the mpeg-2 that dont work on FCP. MP4-quick time player plays my files.
QuickTime player plays your mp4 files. Because it's a playback codec (and more recently, an aquisition codec). It is not an editing codec. Why? Like MPEG2 it uses a Long GOP format.
What's a Long GOP codec? Simple explanation. It is a method of storing lots of video in a small space. It does this by throwing away "redundant" information. Frame 1 is a complete image, as is frame 15, 30, 45 etc. those in between only contain information on what's different or predict what it might be (Oooh artifacting). Think of someone standing in front of a plain colored wall, waving their arm. The difference is the arm movement. Everything else is more or less the same as in frame 1.
But you want to make a cut on frame 8. Wait. Frame 8 can't exist without information from frame 1. Frame 8 needs to be independent so you can make that cut. That can only happen if you transcode the footage so that every frame is independent. Because you want to cut right there and not kind of there. Of course, trancoding to an editable format turns the couple of gigs of footage you shot into considerably more.
So far, you have been lucky. You got away with editing a few simple cuts and probably had to render. But, if you choose your editing codec wisely and set FCP up properly, you won't have to render at all. When your editing gets more complex, using layers and compositing, grit your teeth and wait or ask whatever god you pray to for mercy.
Search terms for this forum: MPEG 4 (or MP4) is not an editing codec. H.264 is not an editing codec. Why don't my mp3 audio files work in FCP?
Things to Google: Long GOP format. (If you want the techie explanation.)

General error out of memory

Hi,
I've imported a video file into fcp to drop into the viewer and into the timeline.
Geeral Error pops up and the next message is Out Of Memory.
Can anyone provide a solution.
Thanks
Mambo Dervish

You didn't provide much information to go on .... but generally speaking, those types of error messages are most often generated when you import a bad/corrupt file into FCP, or a file that isn't readable by FCP.
For a more specific (and more accurate) answer, please provide more information about the file; codec? source? format? resolution? frame rate?
-DH

Error message-----General error (34) Error : out of memory

Im trying to open a sequence & im getting an error message general error (34) Error out of memory
wont open sequence
any ideas

How much free space do you have on your scratch disk
What amount of RAM?
Read this thread:
http://discussions.apple.com/thread.jspa?messageID=1162802&#1162802

Final Cut Pro Error: 'out of memory'/'general error' on export

I'm trying to export a simple timeline from FCP but keep getting Final Cut Pro Error: 'out of memory'/'general error'. Exporting 5 sec timeline (yes, just a short trailer) via Quicktime conversion H264 at 1080. Strangely, if I export exactly same timeline at 720 its fine. Original media ProRes422 1080.
Have exported at 1080 before ok. No nested files involved; re-connected all media; no JPEGs involved; plenty of memory (all of which i have heard can be issues).
Any advice please as i've read all of the FAQs and nothing helping so far?!
Spec: New MacPro 12-core; 12 MB ram; 2TB drive; FCP7

Thanks for workflow clarity Shane, but when you export as self-contained QT movie, what do the 'Current Settings' refer to? Is this the current settings of your (source media in) timeline (ie in my case Pro Res 422) or the last settings used by the export? Apparently 'If you deselect the Recompress All Frames option and choose Current Settings from the Setting pop-up menu, Final Cut Pro simply copies frames from existing media files into the new file with no recompression.' But when i did this I got a 994.1 MB QT movie, which, when i got 'more info' told me MPEG-2 Video (?!) Apparently a compressed file when its supposed to be uncompressed (?!) When i exported manually setting to Pro Res I got 6.77 GB. Clearly uncompressed Apple ProRes 422 (HQ). Do i have to manually set settings to Pro Res to match my source media and ensure i get an uncompressed file? Im searching boards to get some clarity on this too: all references so far advise using 'current settings' but dont actually say what they are.

Getting Error Out Of Memory while importing the work repository in ODI 10g

I exported the work repository from topology of ODI 10g of one DB and tried importing it in the another ODI 10g topology of another DB.While importing i got the error 'Out of Memory' .
Can somebody suggest me ,how to solve the heap size out of memory issue while importing in ODI 10g.
Thanks in Advance.

Hi,
you have to post your question in ODI forum
Data Integrator
Suresh

Final_cut_pro-"Error: out of memory" when rendering with hidef clips

I keep getting this notice when rendering "error: out of memory." Both my external drive and internal drive have plenty of memory; 1.8TB and 101GB respectively. It makes no difference if I am rendering at full resolution or draft. I solved it for a while by clearing out some memory on my internal harddrive,
but now it is back. What is going on. This didn't happen when I was working with regular definition clips but now I am working with high def. What to do?

Drives don't have 'memory' in this context, they are storage containers.
Check my answer to your other thread and give us more info about your rig...Hardware/Software (models/versions), how everything's connected, exact specifications of the media you're working with and sequence settings.
K

How to solve this error JBoss Server start time............

How to solve this error JBoss Server start time............
10:45:38,484 INFO [TomcatDeployer] deploy, ctxPath=/JobWorkInvoice, warUrl=.../deploy/JobWorkInvoice.war/
10:45:38,640 ERROR [STDERR] log4j:ERROR A "org.jboss.logging.util.OnlyOnceErrorHandler" object is not assignable to a "org.apache.log4j.spi.ErrorHandler" variable.
10:45:38,640 ERROR [STDERR] log4j:ERROR The class "org.apache.log4j.spi.ErrorHandler" was loaded by
10:45:38,640 ERROR [STDERR] log4j:ERROR [WebappClassLoader
delegate: false
repositories:
/WEB-INF/classes/
----------> Parent Classloader:
java.net.FactoryURLClassLoader@d5f9b9
] whereas object of type
10:45:38,640 ERROR [STDERR] log4j:ERROR "org.jboss.logging.util.OnlyOnceErrorHandler" was loaded by [org.jboss.system.server.NoAnnotationURLClassLoader@5d173].
10:45:38,687 ERROR [STDERR] log4j:ERROR Could not create an Appender. Reported error follows.
10:45:38,687 ERROR [STDERR] java.lang.ClassCastException: org.jboss.logging.appender.DailyRollingFileAppender
10:45:38,687 ERROR [STDERR]      at org.apache.log4j.xml.DOMConfigurator.parseAppender(DOMConfigurator.java:174)
10:45:38,687 ERROR [STDERR]      at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurator.java:149)
10:45:38,687 ERROR [STDERR]      at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfigurator.java:162)
10:45:38,687 ERROR [STDERR]      at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOMConfigurator.java:424)

The error message suggests that your system is running out of memory. How much memory is available for OC4J on this box?
You may also see problems like these when any of the following Jar files in your classpath :
<li>$OH/jlib/repository.jar
<li>$OH/j2ee/home/jazn.jar
<li>$OH/j2ee/home/oc4j.jar
<li>$OH/j2ee/home/jazncore.jar
<li>$OH/jlib/infratool.jar
Thanks,
EJ

How to solve the Error in Action for illustrator cs3

Through action in illustrator cs3 i changed the document mode RGB to CMYK via Visual Basic. But sometimes it throws 2 different kinds of error messages.
CODE:
appRef.DoScript "Change", "Convert"
While (appRef.ActionIsRunning)
WScript.sleep 1000
Wend
Error 1:
Could not complete the Play Command because the action is playing.
Error 2:
The Object "Document Color Mode: CMYK Color" is not currently available.
Could you please explain how to solve this error.

The input data provided as the first argument to ore.tableApply and rqTableEval are physically being moved from Oracle Database to the database server R engine, and then serially operating on the entire table The benefit to using ore.tableApply/rqTableEval in this case is the potentially greater amount of RAM on the database server. But it's important to note that R’s memory limitations still apply in this case.
You may have already seen the blog post on Managing Memory Limits and Configuring Exadata for Embedded R Execution where we discuss setting memory limits for the database server R engine. These suggestions can be used to load reasonably sized data tables, and you may still encounter limitations when using a very large table.
In contrast to the "table apply" functions, the "group Eval" and "row eval (" functions are parallel-enabled embedded R execution functions. They support data-parallel execution, where one or more R engines perform the same R function, or task, on different partitions of data. The following training and blog links should be helpful in choosing the correct function for your use case:
http://www.oracle.com/technetwork/database/database-technologies/r/r-enterprise/learnmore/ore-1-4-embedded-r-execution-s…
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle1
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle2
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle3
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle4
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle5
Sherry

How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

I hate "J term"
OK I love the learning the students get. And, I like helping them out! But, as a former man who's got the varicose viens to prove he's spent time "behind the podium" (yeah, "behind the podium" puts 'em to sleep- songs and dances for the young'uns) come on! USE the tools you teach!
Instructors invited to engage in the forums
Jeff

Error out of memory when opening an edited sequence

Don't know if this is any use I was attempting to open a hour long sequence in fcp
(I'm only on 6.05 but anyway....) I kept on getting an error out of memory. I did the obvious things opened a new project and put the sequence in it didn't work. Eventually I found that if you open a new sequence and drop the one that won't open into it (this will nest it) and then double click on the nested sequence it will open the original sequence without a memory issue....
Sloppy bit of code there somewhere!!!
Justin

After updating to FCP 703 and osx 10.6.4 a lot of Memory issue has been solved.

Error Out Of Memory Due to Digi Effects

Hello everyone, got a bit of a tricky situation to troubleshoot :/
Before you ask here's my iMac info http://gyazo.com/0648a1d03fb15935117894dd6716ffbc
Ok so the problem is, I'm making this video and its having a lot of distortion effects added to it within FCP 7 using the plugin Digi Effects Damage "Blockade". Now I had a sequence which had just enough memory to use it on all the clips I needed. However, I sent that sequence to Color and sent it back to FCP and in my new 'color sequence' I can watch the whole thing through in real time with safe RT and unlimited RT, however there is this colour http://gyazo.com/d022bf802fb82d76d191a004ddcbc387 above all the clips that have the plugin on.
Although I can watch it through in playback mode, when I render, after a few seconds it says Error: Out of memory.
Here are my general sequence settings http://gyazo.com/a270414e2c2d38cb1274f8f84f507383
I am using clips in the pro res 422 format. Any ideas? :/
-Bob

Hi
Out of memory use to refere to amount of
• RAM
• free Space on Start-Up (Mac OS) Hard Disk - VERY IMPORTANT
• Space availably on Hard Disk/s That holde the Movie Material
RAM
Never been a problem to me - 2 resp 5Gb dep on Mac used
Free Space on Boot HD
I never go under 25Gb free space - when working on SD-Video project's - I guess that 4 - 5 times more will be a safe level when doing HD. This space HAS TO be just here as Mac OS works like UNIX (it is in fact) and then produces lot's of temp. files that can not be stored elsewhere and so does FinalCut (or whatever application running)
Space to keep Movie Project
• Should be on other hard disks than the Boot HD.
• Should be as fast as possibly - RAIDed, FireWire or Thunderbolt - USB/USB2 performs badly to me and especially when filling up and when holding HD-material
• MUST BE - Mac OS Extended (hfs) formatted - this goes for all Video editing - iMovie, FinalCut or Adobe etc.
• This too can fill up - So this space is also important
What memory that are not sufficiant - is hard to guess - when You don't tell the above figure.
Good Luck in finding it
Yours Bengt W

"Error: out of memory" compiling JSPÂ´s

Our web application contains about 5000 JSPÂ´s and 900 java files and every time I want to make the project I get the message "Error: out of memory" compiling the JSPÂ´s despite already using the JVM option -Xmx850M to enlarge the heap size. It is not possible to use any higher value than 850M because this results in following error message launching JDeveloper.
D:\jdevj2ee1013\jdev\bin>jdev.exe
Error occurred during initialization of VM
Could not reserve enough space for object heap
The computer I use for development has 2GB of memory and JDeveloper is the only application running, therfor there must be enough memory available.
If I deactivate "Make Project before running" IÂ´m able to launch the application and debug JSPÂ´s, but every time a page is called itÂ´s recompiled, even if it has not changed, which costs a lot of time.
Is it possible to disable the JSP translation in the development process and only translate and compile the JSPÂ´s at request time in the embeded OC4J and make sure that this happens only once if the JSP has not changed?

I have solved the problem. I removed the transition, "Light Slice" from PulpFx. It was giving me trouble earlier. I don't know why, or if it's fixable and able to be used in the future, but I can render 100% after that effect is removed from the footage/sequence.

How to Solve "General Error: Out of memory"

Similar Messages

Maybe you are looking for