How to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.

Similar Messages

  • How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

    I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
    Two things:
    1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
    2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......".  I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
    Obviously it will fit.
    What am I doing wrong, all of a sudden?

    Hey ryclark,
    Thanks for responding. Something else is going on here.....
    Here's what I re-replied to our friend...
    Thanks for the response.
    When I built this computer last Nov/Dec, it was built with the second 
    fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's  running
    Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard 
    drive space. It is set up with 64 bit. I had been using Audition CS3 for  many
    years and even go back to it's origin: Cool Edit and Cool Edit Pro. My 
    learning curve was minimal, sans the CD burning, which I used other software
    for  which is now antiquated, so I need Audition for this. Between this and 
    IZotope 3 I've repaired and improved many a recording. All-in-all extremely 
    useful software.
    As for the idea "to burn it anyway", well the error message comes up and 
    that's it - if I "X" out of that message and try to burn again the message
    comes  back  - so Audition will not let me. It is convinced that this file is 
    longer than it really is, but only when I add track  marks to it!
    There are only 11 tracks.
    I was able to burn a CD of this same file but without all the track marks, 
    so the same exact file length/size will burn, only as the one track.
    I've also succeeded in burning other WAV's , both greater and smaller, with
    and without multiple track marks, without issue. Of course all with less 
    than the CD's max. capacity.
    This problem seems to be with this one file. I've even  re-made/re-recorded
    the file from scratch with no change. There's something else  going on here
    that I can't put my finger on. (I am "recording" LP's and making  personal
    CDs of them)
    Also, only from time to time, I have another error after burning a CD that 
    states it could not verify the CD. For this I assume it is the blank rather
    than AA? The first might burn without issue and with the second burn I 
    get the error. It is near the end of a stack of blanks, so.....
    As for the need to "mark the end" of the file makes a lot of sense but of 
    all the other CD track-marking software I've used, none needed one to do
    this,  but this IS Adobe after all.
    You'd think there might be a smidge of intuitiveness with Adobe, but maybe 
    not.
    - Mark
    In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time, 
    [email protected] writes:
    How  to solve Audition CS6 error "The amount of audio to burn will not fit
    on  the CD........."?
    created by ryclark (https://forums.adobe.com/people/ryclark)  in 
    Audition CS5.5, CS6 & CC - View the full  discussion
    (https://forums.adobe.com/message/6605916#6605916)

  • How to open Illustrator CS6 apple 10.10.1

    How to open Illustrator CS6 in apple 10.10.1

    Why did you mark this topic as 'solved' then?
    Do you get a message when trying to launch Illustrator? Like this?
    http://www.macambulance.co.uk/illustrator-cs6-requires-java-runtime-os-x-10-10-y osemite/

  • How to migrate illustrator cs6 presets to Illustrator CC

    how to migrate illustrator cs6 presets to Illustrator CC

    Ah yes, the Library folder is one of the hidden ones, isn't it?
    I believe I have some notes somewhere of how I can show hidden files in Terminal.... am I on the right track?
    Since you're an MVP :-)  I wonder if you can help me with one other weird thing I've noticed in Illustrator. Why I am NOT able to turn on the modal dialog boxes, or view any list of settings, regarding Image Trace steps in my Actions panel? I would like to be able to choose what Image Trace preset I use during an action, but it always chooses [Default] and does not give me any means to change that.

  • How do I save a PDF as an excel file when the PDF is horizontal. Adobe tries to rotate the page, but the data is entered in an  horizontal format.

    How do I save a PDF as an excel file when the PDF is horizontal. Adobe tries to rotate the page, but the data is entered in an  horizontal format.

    Thanks for the quick reply.  I figured out how to get the desired results by using tagging.  For anyone who may reference this post in the future, I went to "Customize" in the top right corner of Adobe, then selected "Create new tool set...", looked under "accessiblity and found the "tag" option.  Hit ok, tag is added to the toolbar.  Then I highlighted the dataset in the PDF that was relevant to the output format, then clicked "tag", saved as spreadsheet.  Sorry I can't provide more details on how tagging works or if there's a more elegant solution available, but I'm sure one's out there.

  • How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF.  But if I do a copy and p

    How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF.  But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.

    Use the Pencil Tool
    alex
    adrian stock wrote:
    > How to copy and paste a single pixel
    >
    > I want to copy a single pixel and then paste it in the
    position of
    > another pixel in the same image.
    >
    > (This is in effect changing the colour of the target
    pixel, isn't it.
    > But in my case copying an existing pixel seems simpler
    than selecting a
    > colour from the swatch or using the colour picker.)
    >
    > What is the most efficient way of doing this?
    >
    > I tried to select one pixel with the marquee tool. Then
    copied it with
    > control-C, but then how do I select the target pixel and
    paste with
    > control-V?
    >
    > Thanks for your help.
    >
    > Adrian
    >

  • Why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas

    I am on a IMAC and upgraded to 10.6.8 Jan 2014. I am using CS4 Illustrator to create with. When i save my work as a pdf then reopen the pdf in Ill to make changes, the whole page has:
    A.) Multiple clipping paths around it
    B.) Most text has now become outlined. Not editable anymore.
    C.) Gradient areas have multiple clipping paths of the single gradient area
    D.) The gradient areas now become rasterized.
    This is very frustrating as now all of my marketing files, some 300+, are worthless. I don't know where to look anymore to find the problem.
    Please help.
    Thank you very much

    John,
    I have the presets as you have shown. I had been editing the supplied items as you suggested. Then figured i should ask the questions of those who are better than I.
    But still a bit confused as to why the new save places clipping paths around the document.
    Thank you John and Monika for your help.
    why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas
    created by John Mensinger in Illustrator - View the full discussion
    I do a save as "pdf" in the format pull down tab. I save to a folder on the hard drive. Where is the "Illustrator editability" check box? I presumed it is in Acrobat some where
    but i seem to be lost.
    It is in Illustrator's Save Adobe PDF dialog, which pops up before the saved file is written.
    https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6439399-644928/450-397/Untitl ed-1.jpg
    Sorry i didn't mention this, but this seems to have occurred when using images and text from provided pdfs.
    That's a critical fact. If you didn't do the original save, the above is moot, and it's too late to exercise any control over the save process. Someone else failed to save for editability. The only thing you can do is clean up/repair the content, (release clipping masks, rebuild rasterized elements, expand objects, etc.), and save correctly as AI. Then, if necessary, re-save as PDF with the correct settings.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6439399#6439399
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Illustrator by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • My computer, running on Lion, randomly flashes with crazy lights and colors. Doesn't happen often, but when it does it's totally random. What causes this problem and how can I solve it?

    My MacBook Pro, running on Lion, randomly flashes with crazy lights and colors. Doesn't happen often, but when it does it's totally random. It looks like the Northern LIghts!!!
    What causes this problem and how can I solve it?

    Really? Oh I get it. You're the kind of person who goes on tech message boards to make jokes - or friends.
    Well, I'm trying to solve this problem - which is a rather annoying way to spend a Saturday.
    SO either help or don't reply.

  • When trying got save a document I get a message saying "can't open untitled.page" and it doesn't save or if it does i can't open it. why.

    When trying got save a document I get a message saying "can't open untitled.page" and it doesn't save or if it does i can't open it. why.

    I think I found out how to solve this - I turned off iCloud documents and data, and now I can save and don't get the "can't open untitled.page" and am now able to properly save!
    Hope it works for you.

  • I bought and downloaded iWork when i bought my macbook pro and i used to save my documents on words. then a few weeks ago, i downloaded a free trial of microsoft office but unregistered and deleted it a week after. now i can't save my documents on word.

    i bought and downloaded iWork when i bought my macbook pro and i used to save my documents on words. then a few weeks ago, i downloaded a free trial of microsoft office but unregistered and deleted it a week after. now i can't save my documents on word. It used to ask me if I want to save my documents on word, now it doesn't. And the W icon keeps on appearing on my dock. Can I return my computer to an earlier date? Please help me. Thanks

    No, I don't have a back-up of TIme Machine... to tell you the truth, I have this computer for a few years now and I still don't know how to work all of the apps that are here. Anything else I can do?

  • After Effects CS5 is crashing my Mac when I trim a clip

    I don't have much to explain this further but After Effects CS5 is crashing my Mac when I trim a clip.  It completely turns off my Mac when I trim a clip. The only other similar thing is Photoshop CS5 is also doing crashing my Mac when I resize large images.  Small images are fine but large 300dpi images crashes it without warning. Don't know what to do.
    I have 8gigs of Ram and am running 27" iMac Core i5
    Any help would be much appreciated!
    Thanks,
    Hal

    Are you running these two program together?
    I would think so.OK you are probably running them both as 64 bit that is great that they run 64 bit and can use more RAM and even better they actually do use more RAM.
    So the solution is probably more RAM, don't run them to together or lower the expectations of Photoshop and AE.
    That way they won't try to use all the RAM to do this work. It will probably do the wrk pretty fast but not as fast if you had more RAM maybe.
    Also AE and PS on an iMac, what about your scratch disk. Is it a very fast external drive and how is it connected?
    If you don't have a fast internal drive say with at least a 32MB buffer running at 7200rpm then there you go a real contributing ffactor.
    To be honest you need both more RAM and a fast start up disk and a fast external scratch.
    The new 2TB drives by Seagate run at 7200 rpm and have  64 MB cache which s as important as the rotation. You can possibly make a Raptor an external scratch as well at 300 GB they are probably not arge enough s a start up.
    Those are my thoughts.
    16 GB of RAM a larger faster internal drive lower the performance and memory setting as well.

  • How do i find which Apple ID is associated with music in my iTunes? When I sync with my iPad and iPhone it tells me I have music, apps etc from more than five IDs. I am asked for PW for a number of now extinct accounts.

    how do i find which Apple ID is associated with music in my iTunes? When I sync with my iPad and iPhone it tells me I have music, apps etc from more than five IDs. I am asked for PW for a number of now extinct accounts.

    Go to Settings/icloud. The Apple ID at the top of the screen is the only one you need to be concerned about. That one MUST be a working ID, and you must know the password for it, or you will be unable to use the phone if it ever crashes, you want to update it, or you want to sell it.

  • How can I take my iCloud account off of my sons phone when the settings/iCloud feature is not hilited?

    How can I take my iCloud account off of my sons phone when the settings/iCloud feature is not hilited?

    No it's all greeted out too:-( I'm not sure why he's getting txts and emails that I get too. I think he has access to my pics as well.

  • Hi my iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?thanks

    hi my
    iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?
    also recovery mode shows up as a red icon instead of a blue one, not jail broken or had any third party alterations
    thanks

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

    Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

    cor-el,
    I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
    Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
    Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
    Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

Maybe you are looking for