How to solve ipad2 disabled

how to salve ipad2 disabled
and already trying itune restore but not activate

Try and force your iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

Similar Messages

  • TS3694 My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not.  The error message indicates an unknown error has occurred, with error code 6.  Does anyone have any idea what the problem might be and how to solve it?  Many than

    My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not.  The error message indicates an unknown error has occurred, with error code 6.  Does anyone have any idea what the problem might be and how to solve it?  Many thanks.

    Hi
    I followed this guy's instructions and it worked:
    http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
    I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
    Cheers for you help.
    Andy
    Message was edited by: bigbadandy

  • Hi my iphone 4 is disabled how can solve this problem? help me please

    hi my iphone 4 is disabled how can solve this problem? help me please

    What do you mean by "disabled"? Disabled by entering the wrong passcode? If so, you'll have to force the phone into recovery mode & restore it to get it working again & remove the passcode:
    Turn your phone off, then force it into recovery mode & restore it:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem

    My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem

    Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • HT204266 how to solve problem 'your apple id has been disable'?

    how to solve problem 'your apple id has been disable'？

    Depending on why it's been disabled, you might be able to re-enable it via this page : http://appleid.apple.com
    Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • How to solve ?Say your apple ID has been disable

    Tell me how to solve....your apple ID has been disabled.

    Try changing your password as a first step.
    Also, see here http://support.apple.com/kb/TS2446

  • Please help me ! How to solve when iMac, OS X Mavericks (10.9.2) is disable ?

    Please help me ! How to solve when iMac, OS X Mavericks (10.9.2) is disable ?

    I had the same problem.
    Try this.
    https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

  • How to solve when iPad disabled ?

    Please hepl me ! How to solve when iPod touch (5th generation), iOS 7.1.1disabled ?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • How to solve disabled textbox (insert to database)

    hi all,
    i want to insert value from textbox to database...why when my textbox disabled that value can't insert to database(i'm using micromedia dreamwear to create screen)...how to solve it....

    I'm missing something. Where's the Java connection here? Thanks.
    (also, the Macromedia folks, makers of Dreamweaver would be pissed to see you calling them "micromedia" and the product dreamwear)

  • Threat Feed say my ipad2 got threats, memory corruption vulnerability exist, which could lead to remote code execution. How to solve this problem?

    Threat Feed (McAfee) say my ipad2 got threats, memory corruption vulnerability exist,
    which could lead to remote code execution. How to solve this problem?

    You can't solve this problem yourself. You would need to wait for apple to release a "fix" or for McAfee to revise their judgement.
    If you're worried about the threats, don't do things that would expose yourself to the vulnerability that they describe.
    Since I can't see what you're looking at, I can't give you any other advice.

  • Who can tell how to solve about the apple ID, because my apple ID was been disabled since two last week. And, i tried change my password through iForgot. Anyone? Thanks.

    Anyone? Thanks ;) tell me
    How to solve about the "apple ID has been disabled"?

    I am having the same issue. I just got my Iphone4 on Friday and no matter what I do to confirm my AppleID, it says its been disabled. Anyone have any ideas?

  • Hello  Simple problem - don,t know how to solve it.  With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was de

    Hello
    Simple problem - don,t know how to solve it.
    With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
    I was like ????#$%?&*(???
    Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
    Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! -  is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
    The problem is that scrolling is enable while clicking and it bugs.
    How to disable it ??
    Simple question - can't find the answer !

    Helllooo !?
    sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
    Thanks !!

  • How to solve delay in a program with data aquisition and processing

    Hello, I am a starter in Labview programing. I am working on a system which contains a roller, a piston and a A/D cart which is from Data Translation Inc (DT304). I am using labview to get speed data of the roller (which is voltage first then be converted into speed) from Analog Input Channels, and then using Analog Output Channels to control the friction force being appylied to the roller by using a piston.
    I am using a Waveform Chart to show the speed of roller. However, as I am adding more components to the program, I always get delay in the speed display and also the output control of the piston. Also, as I spent more time using the program eg. from morning to night, it became slower too.
    My question is, how does labview store data and how are the data been stored and released in the buffer.Is it because I am loading too much data in the buffer so that it became slower? And also how to solve these delays?
    I am using the "save to file" function to write data to a ".lvm" file, but I did some changes to the saving by using a button to enable and disable saving. So I don't think the problem is because I am always saving the data into a file.
    Thank you very much.
    Jessie

    I'm betting it's two things:
    1. Program Architecture
    and 2. Dynamically resizing arrays.
    With the program architecture... if you have one do-while loop that acquires data from teh DAQ, processes it, opens/indexes/writes/closes a file, then comes back around... as your arrays and files increase in size, the loop is going to take longer to execute.  A Producer-Consumer loop (a good tutorial on them can be found here) has one loop that acquires data and stuffs the data into a queue.  This will buffer the data while it's in transition between acquisition and processing.  A second loop in parallel takes data in from the queue, processes it, then comes back around.  The two loops operate independently of each other, so even if the consumer loop takes longer as the files or math gets more complex, the producer loop continues to run full speed.
    Second is the arrays.  Every time you append data into an array, LabVIEW has to make a copy of the data that's in the array.  If you append small amounts of data to an array over and over and over again, eventually LabVIEW is going to be copying very large amounts of data over and over and over again.  The producer-consumer architecture can alleviate this problem.

  • How to Solve This in Win8: "Photoshop CS6 has stopped working ... ..."

    Anyone know how to solve this problem?? Please help. It's given me a lot of headache and I need it fixed as soon as possible.
    I have re-installed. And system restore. Everything is up-to-date. And I cannot find the problem to solve it.
    Computer Details:
    Tech Support Guy System Info Utility version 1.0.0.2
    OS Version: Microsoft Windows 8 Pro, 64 bit
    Processor: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz, Intel64 Family 6 Model 26 Stepping 5
    Processor Count: 8
    RAM: 6142 Mb
    Graphics Card: NVIDIA GeForce GT 240, 1024 Mb
    Hard Drives: C: Total - 122001 MB, Free - 14560 MB; D: Total - 953866 MB, Free - 176631 MB; F: Total - 296441 MB, Free - 8907 MB;
    Motherboard: Gigabyte Technology Co., Ltd., X58A-UD3R
    Antivirus: Windows Defender, Disabled
    Other Details:
    Faulting application name: Photoshop.exe, version: 13.0.0.0, time stamp: 0x4f61c045
    Faulting module name: SelectivePalette.8li, version: 2.1.4.131, time stamp: 0x529e6913
    Exception code: 0xc0000005
    Fault offset: 0x0000000000009582
    Faulting process id: 0x3ac
    Faulting application start time: 0x01cf08a96051f5a5
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
    Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\Google\Selective Tool\SelectivePalette.8li
    Report Id: a1a5ffce-749c-11e3-bf7b-1c6f65365a00
    Faulting package full name:

    Your Nik/Google SelectivePalette plugin crashed.
    Disable the Nik/Google plugins for now, and contact Nik/Google for updates/bug fixes.

  • I am unable to watch any tv channel due to the problem that it says is the source code is protected by html guardian. how to solve this problem?

    when i tried to watch a tv channel on livetvchannelsfree.in it says that the source code is protected by html guardian. in firefox 3.6 beeta5 i did not come across this problem. but now in latest version i am unable to watch any tv channel. canyou please tell me how to solve this problem?

    Forgotten Passcode or device disabled after entering wrong passcode

Maybe you are looking for