How to solve no sound in XP on new PCs after reboot. solution

hello all ..
how to know Many of us have chosen to install on their computers windows XP
and I think we all have a problem with sound.
When we already find correct drivers that make the sound appear,
there is another problem, after restart, the computer lost the driver.
and now I write, what to do, that it was not.
I do not mean to put in the startup file
that will be at every restart, Restarted UAA BUS DRIVER.
I mean to be a sound and speaker icon next to the clock without unnecessary processes ..
to solve the problem and enjoy the sound, you must copy from the computer where is installed Windows Vista SP2 x32 or x64
the file HDAUDBUS.SYS who find in Windows \ system32 \ DriverStore \ FileRepository \ HDAUDBUS.INF
then in our system, XP x32 or x64-based open device manager and then open the System device
and click on "Microsoft UAA Bus Driver" and select Update Driver
and then point out the place where you keep a file Hdaudbus.sys copied from Vista.
we do this with both "UAA bus driver" from device manager forced to manually update the driver,
and after enjoy the sounds and loudspeaker icon after every restart
vista x32 Hdaudbus.sys--> 548kb for XP x32 sp2/sp3
vista x64 Hdaudbus.sys--> 927kb for XP x64 sp2
enjoy  http://www.speedyshare.com/files/23515304/UAA_BUS_DRIVER_z_VISTY.rar

Hi,
Witam na forum. Milo ponownie zobaczyc rodaka.
fingerprint sensor:
AuthenTec AES1610 Fingerprint Sensor here
kontroller IEEE1394 zgodny z OHCI:
IEEE1394 here
HP integrated Module:
Bluetooth wireless here
Zeby byc pewnym ze na pewno dostarcze ci dobre sterowniki audio prosze zeby postapil zgodnia z ponizsza procedura:
 Go to Control Panel -> System -> Hardware -> Devices Manager
Click with right button of Your mouse on each yellow sign and choose properties. Then go to bottom details and paste here device id. This way we will know what it is.
Below You've got example how to do it:
How to get Recovery disk all informations here.
Links to get Vista recovery disk You may found here.
Z tym ze z tego co pamietam to niestety jezeli chodzi o Polske to nie zadziala.
Skontaktuj sie z HP i popros o taka plytke.
Contact with HP. How to do it all informations here (just choose Your country).
Jezeli beda jeszcze jakies problemy po prostu pytaj.
Message Edited by Daniel_Potyrala on 11-01-2009 01:50 PM
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Similar Messages

  • How do I sync my Ipod to a new library after my computer has crashed?

    How do I sync my Ipod to a new library after my computer has crashed?

    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
    Sync transfer is one way, matching the device content to the content on the computer, except purchased content as mentioned above.  For transferring other items from an i-device to a computer you have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing):
    - Senuti - http://www.fadingred.com/senuti/
    - Phoneview - http://www.ecamm.com/mac/phoneview/
    - MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows
    - Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
    - Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141
    In general do not regard your i-device as a reliable unique storage for your media. It is not a backup device and everything is structured around you maintaining a backup of your media on a computer backup.

  • How do I sync my Ipod with a new Itunes after losing my old Itunes when my hard drive went out?

    I had my itunes on one of my few computers that I have. The hard drive on the computer that I had my itunes on went out and I had to replace it, losing my itunes and other things, but I cared more about the itunes then I did with anything else. Now when I try to download itunes and try to sync my ipod, it says that if I sync it, all music with be replaced, and I don't want that. How do I sync my ipod to that new itunes without losing all my songs?

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek

  • [SOLVED] No Sound through HDMI port in Intel after power save

    Hi,
    I build an HTPC with Arch inside. I output the sound into the HDTV through the HDMI port of the motherboard, following the instruction of the archwiki. Both, the audio and the video are from the motherboard (i.e, I don't have external video or audio cards). Everything works very neat, except for one issue. When I have a couple of minutes without moving the mouse, the video goes black, like a screensaver and I also lost the audio. I guess it is a default configuration in a power saving domain, although I don't remember having installed any. Maybe it is a default of the video driver. I'm using the default xf86-video-intel driver, and I have installed the lib32-intel-dri package.
    If a move mouse, the video returns normally. The problem is the audio. I guess that it's because I have the audio through the HDMI port. If I move the mouse immediately after the video and audio are gone, both return without problem. But if I leave the system into this power saving mode for a couple of minutes, and then move the mouse, the video goes back, but the system is mute. I try
    $ speaker-test -c 2
    , and also
    $ aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
    and there are no errors. It seems like the sound is being played, but no longer through the HDMI port.
    Is there anyway to check where that powersave comes from? Is there any way to disable it, or at least, a way to make sure that the audio is output through the HDMI port after the powersave mode?
    If someone is willing to help, and need the output of command or the content of any configuration file, please let me know.
    Thanks in advance,
    Last edited by phollox (2013-05-09 18:42:38)

    Thanks jv2112. I read that article before but skipped that section. I disabled all of those options, and at least, the sound doesn't disappear after the video goes black. I have tried several times, for several hours, and the sound is still there. The video still goes black, but I have my sound. Therefore, I mark this issues as solved.
    Thanks,
    jv2112 wrote:
    Check out the wiki.
    https://wiki.archlinux.org/index.php/Intel_Graphics
    Module-based Powersaving Options
    The i915 kernel module allows for configuration via /etc/modprobe.d/i915.conf wherein users can define powersavings options. A listing of options is available via the following command:
    $ modinfo i915 | grep power
    An example /etc/modprobe.d/i915.conf:
    options i915 i915_enable_rc6=7 i915_enable_fbc=1 lvds_downclock=1

  • [SOLVED]no sound in both headphone and speaker after update (alsa)

    No sound after update. But, I can hear sound in headphone after install pulseaudio, while there is no sound in speaker (after plugging out headphone). I have tried some methods in related wiki articles, such as alsa and pulseaudio, but not works.
    My enviroment is arch64, kde. I have installed lib32-alsa-plugins lib32-libpulse lib32-openal.
    Anything others I can do? Thanks for advance.
    Here is the output:
    xym@Arch ~ $ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    xym@Arch ~ $ lsmod | grep '^snd' | column -t
    snd_hda_codec_hdmi 30162 1
    snd_hda_codec_realtek 41295 1
    snd_hda_intel 37000 3
    snd_hda_codec 150305 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6340 1 snd_hda_codec
    snd_pcm 77645 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
    snd_timer 18726 1 snd_pcm
    snd 59109 13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    xym@Arch ~ $ ls -l /dev/snd
    total 0
    drwxr-xr-x 2 root root 60 Jan 15 11:09 by-path
    crw-rw----+ 1 root audio 116, 7 Jan 15 11:09 controlC0
    crw-rw----+ 1 root audio 116, 6 Jan 15 11:09 hwC0D0
    crw-rw----+ 1 root audio 116, 5 Jan 15 11:09 hwC0D3
    crw-rw----+ 1 root audio 116, 4 Jan 15 12:17 pcmC0D0c
    crw-rw----+ 1 root audio 116, 3 Jan 15 12:17 pcmC0D0p
    crw-rw----+ 1 root audio 116, 2 Jan 15 12:17 pcmC0D3p
    crw-rw---- 1 root audio 116, 1 Jan 15 11:09 seq
    crw-rw----+ 1 root audio 116, 33 Jan 15 11:09 timer
    amixer
    Simple mixer control 'Master',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined
    Playback channels: Mono
    Limits: Playback 0 - 64
    Mono: Playback 64 [100%] [0.00dB] [on]
    Simple mixer control 'Headphone',0
    Capabilities: pvolume pswitchs
    Playback channels: Front Left - Front Rightss
    Limits: Playback 0 - 64s
    Mono:
    Front Left: Playback 64 [100%] [0.00dB] [off]
    Front Right: Playback 64 [100%] [0.00dB] [off]
    Simple mixer control 'Speaker',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 64
    Mono:
    Front Left: Playback 64 [100%] [0.00dB] [off]
    Front Right: Playback 64 [100%] [0.00dB] [off]
    Simple mixer control 'PCM',0
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 255 [100%] [0.00dB]
    Front Right: Playback 255 [100%] [0.00dB]
    Simple mixer control 'Mic',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 31 [100%] [12.00dB] [on]
    Front Right: Playback 31 [100%] [12.00dB] [on]
    Simple mixer control 'Mic Boost',0
    Capabilities: volume
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 0 [0%] [0.00dB]
    Front Right: 0 [0%] [0.00dB]
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'Beep',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 0 [0%] [-34.50dB] [on]
    Front Right: Playback 0 [0%] [-34.50dB] [on]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 31
    Front Left: Capture 31 [100%] [33.00dB] [on]
    Front Right: Capture 31 [100%] [33.00dB] [on]
    Simple mixer control 'Auto-Mute Mode',0
    Capabilities: enum
    Items: 'Disabled' 'Enabled'
    Item0: 'Disabled'
    Simple mixer control 'Digital',0
    Capabilities: cvolume
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 120
    Front Left: Capture 60 [50%] [0.00dB]
    Front Right: Capture 60 [50%] [0.00dB]
    Simple mixer control 'Internal Mic',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 31 [100%] [12.00dB] [off]
    Front Right: Playback 31 [100%] [12.00dB] [off]
    Simple mixer control 'Internal Mic Boost',0
    Capabilities: volume
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 2 [67%] [20.00dB]
    Front Right: 2 [67%] [20.00dB]
    xym@Arch ~ $ speaker-test -c 2
    speaker-test 1.0.27.2
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 2 channels
    Using 16 octaves of pink noise
    Rate set to 48000Hz (requested 48000Hz)
    Buffer size range from 2048 to 16384
    Period size range from 1024 to 1024
    Using max buffer size 16384
    Periods = 4
    was set period_size = 1024
    was set buffer_size = 16384
    0 - Front Left
    1 - Front Right
    Time per period = 5.651882
    0 - Front Left
    1 - Front Right
    Time per period = 5.973485
    0 - Front Left
    I can't hear any sound during this test.
    /etc/modprobe.d/modprobe.conf
    blacklist snd_intel8x0m
    Last edited by XuYimin (2014-01-16 12:18:02)

    straykat wrote:
    XuYimin, can you please give more info on what you mean by "update (alsa)"? There is no "alsa" package in Arch as alsa & it's modules are part of the (linux) kernel.
    As you have already gone into alsamixer to ensure the appropriate channels are unmuted & set at the desired level, have you also gone into your KDE systems settings -> Multimedia -> Audio and Video Settings & rechecked your settings?
    sorry,it's really misleading in my words.what i want to say is 'no sound after update, and the sound system is alsa.'
    i'm sure the approiate channels are unmuted. in the Video Setting, I tested all sound cards in the list, But i can't hear sound.

  • How to solve poor internet connection for iPad New due to bugs or glitch in ios6

    I m using iPad New with ios6 version. Since the upgrade I m facing a very serious internet connection for my ipad. Its worthless to have ipad when there is no internet connection or having difficulty to get the connection. Can someone give me some advice even up to the stage if downgrading to the previous version which is known to be working very well.

    First, presumably your WiFi network is connected to the Internet right? However, even if so, you may not really be connected to your WiFi network.
    Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Do not reset your router. Next, reset network settings on your iPad (Settings > General > Reset > Reset Network Settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • How to download already purchased software onto a new computer after the old computer crashed?

    I bought the Adobe Creative Suite 6 Design & Web Premium in 2012. The computer that it was installed on broke down last week. I would now like to install that same CS6 software onto my new computer. I still have the serial number. How can I achieve this?

    CS6 product downloads
    Mylenium

  • How do I keep iTunes from creating a new playlist after I edit a current playlist on my iPhone?

    I am trying to figure out how to keep my iTunes library from creating a second playlist on my computer when the first playlist is edited on my iPhone. The situation is as follows:
    1. Create "playlist" on computer.
    2. Sync iPhone and upload "playlist."
    3. Listen to "playlist" for a couple hours and wonder how "lame song" made the cut.
    4. Edit "playlist" on iPhone to remove "lame song."
    5. Check iTunes and realize the editing "playlist" on iPhone has created "playlist 1" with "lame song" removed.
    I am sure that there is a checkbox somewhere that I am missing. Any help?

    No, there is no custom setting for this. I wouldn't advise it, but if you really want you could downgrade to the older folder layout. However all your other folders will be arranged in the old layout too which may no be what you want.
    See this old post of mine for more details. (Read the last bit first.)
    tt2

  • How to fix the Draggable element at its new location after every drag

    Hi All,
    I was trying something new with implementing the "Drag & Drop" control in UI5 .
    The whole functionality involved putting all the items in the list and ,making them draggable.
    After the user drags and drops the item to a new location , it becomes fixed at the position , until its dragged again.
    This is the following piece of code that i was working on :
    $.sap.require('sap.ui.thirdparty.jqueryui.jquery-ui-core');
      $.sap.require('sap.ui.thirdparty.jqueryui.jquery-ui-widget');
      $.sap.require('sap.ui.thirdparty.jqueryui.jquery-ui-mouse');
      $.sap.require('sap.ui.thirdparty.jqueryui.jquery-ui-draggable');
      $.sap.require('sap.ui.thirdparty.jqueryui.jquery-ui-sortable');
      $.sap.require('sap.ui.thirdparty.jqueryui.jquery-ui-droppable');
      var backlog = ["As a site visitor, I can read FAQs","As a site editor, I can maintain an FAQ section","As a site member, I can download the latest training material and methodology PDFs","As a visitor, I can download presentations, PDFs, etc. on Scrum that I can use"];
      backlog.sort();
      jQuery.sap.require("jquery.sap.strings"); //Load the plugin to use 'jQuery.sap.startsWithIgnoreCase'
    var oAdd_backlog = new sap.ui.commons.Button({text:"Add Backlog Item", tooltip:"Submit value",width:"160px"});
           var oHorizontal_Layout = new sap.ui.layout.HorizontalLayout("Layout1", {
            content: [oSearch, oAdd_backlog, oBacklog_status_filter ]
      //vertical layout
        // create a list box to show the backlog items
      //backlog list
      var backlog_list = new sap.ui.commons.ListBox("list1", {visibleItems:100, width : "60%"});
      // initialize the list
      updated_baklog_List(backlog_list);
      backlog_list.addStyleClass("list_css1");
    //drag and drop functionality
      var oOldOnAfterRender = backlog_list.onAfterRendering;
      backlog_list.onAfterRendering = function() {
      oOldOnAfterRender.apply(this);
      var $listBoxId = this.getId();
      $("#"+$listBoxId+"-list").sortable();
      //final layout
      var oVerticalLayout = new sap.ui.layout.VerticalLayout("Layout2", {
      content: [oHorizontal_Layout, backlog_list]
    Your inputs and new approaches are valuable to my research .

    You shouldn't have to do anything.
    Holdend is default and it ought to keep the value.
    I guess something else is happening which interferes.
    Are you stopping the animation?
    Starting another one ( which will effectively stop the first )?
    Or something.
    I did a very quick and dirty test changing a colour:
    <UserControl.Resources>
    <Storyboard x:Name="sb">
    <ColorAnimation
    Storyboard.TargetName="Button1BackgroundBrush"
    Storyboard.TargetProperty="Color"
    From="Red" To="Yellow" Duration="0:0:5"
    FillBehavior="HoldEnd"
    />
    </Storyboard>
    </UserControl.Resources>
    <Grid x:Name="LayoutRoot" Background="White">
    <Button
    Content="This is a button">
    <Button.Background>
    <SolidColorBrush x:Name="Button1BackgroundBrush" Color="Red" />
    </Button.Background>
    </Button>
    </Grid>
    </UserControl>
    Code behind
    public MainPage()
    InitializeComponent();
    this.sb.Begin();
    It stays yellow.
    Hope that helps.
    Recent Technet articles:
    Property List Editing   ;  
    Dynamic XAML

  • DW CS4: How to play a Flash Movie in a NEW window after clicking a link or a button on a page?

    Hi, using Adobe Dreamweaver CS4, I would like to have a link or a button on a webpage that when clicked will play a Flash Movie in a new window.
    Using the 'Insert Panel' > Media: FLV I managed to insert the .flv file on the page, but the movie plays 'in line' instead of in a new window. So far I can't find any 'Properties' or settings to change this behaviour. E.g. like Target _blank for opening e.g. a .pdf in a new Window.
    > Please help.
    Thank you!

    Try using one of the popular javascript methods for this. I use shadowbox and you can find examples, info and a download here: http://www.shadowbox-js.com

  • How to automatically startup a report in a new window after committing a form

    I have a form on a portal-page. The user enters values in the form and presses the INSERT button.
    After doing so, I want to show a report in a NEW window querying some values the user entered in the form.
    I was hoping to be able to use the After Processing Form PLSQL-section as follows:
    declare
    l_id integer;
    l_url varchar2(2000);
    begin
    l_id := p_session.get_value_as_NUMBER(
    p_block_name => 'DEFAULT',
    p_attribute_name => 'A_ID');
    l_url := 'APP_OWNER.MY_REPORT.show?'
    &#0124; &#0124; 'p_arg_names=id&p_arg_values='
    &#0124; &#0124; to_char(l_id);
    htp.p('<a href="' &#0124; &#0124; l_url &#0124; &#0124;' target="_blank"></a>');
    end;
    But I see only "Inserted one record" and no report is started.
    I've tried to use the after-form-processing part, but it seems I can only startup reports in the same window with GO and CALL.
    Also the ID-variable can not be read from that part.
    A second solution I tried was to put this PLSQL in the PLSQL-handler-section of the button, but for some reason all double quotes " are automatically changed into single quotes ' causing several Java-script errors. Perhaps a bug?
    Does anyone have a solution for this functionality?
    Thanks,
    Jan Willem Vermeer

    Hi,
    There are 2 scenarios I can think of:
    1. The value of ORD_ID is not known until the insert processing completed.
    2. The value of ORD_ID is known and can be retrieved without a roundtrip to the server.
    The 2nd scenario is being simpliest and could be done from Javascript w/out any server involvement, all you need is the getField() function (or any other function to get the field value) described here : http://technet.oracle.com:89/ubb/Forum81/HTML/000073.html
    Javascript piece goes something like this:
    myWindow = window.open("http://myhost/portal30/pos.APPROVAL_INVOICE_DYN.show?p_arg_names=ord_id&p_arg_values=" + getField(this.form,"ORD_ID"),
    "myWindowName","toolbar=yes,location=yes,directories=no,status=yes,menubar=yes,scrollbars=yes,resizable=yes,height=400,width=600");
    The first scenario is more complicated.
    During the "accept cycle", when your PLSQL insert/update etc. event handlers are
    fired all the processing output will happen into the current window.
    Neither owa_util.redirect_url() nor wwa_app_module.set_target() will help.
    Both of them will do a redirect only in the current browser window,
    actually, wwa_app_module.set_target() internally calls owa_util.redirect_url().
    What you need is:
    1. Get the field value, and either: 1. store it somewhere in a package variable,
    or: 2. do this all at once in "before displaying the page"
    2. After the form processing is completed (but not in the onSuccess!!! code),
    open a new browser window w/Javascript specifying the same url you were passing to
    set_target().
    Here is my example, place following code into "before displaying the page" additional PLSQL block:
    declare
    l_id integer;
    begin
    l_id := p_session.get_value_as_NUMBER(
    p_block_name => 'DEFAULT',
    p_attribute_name => 'A_ORD_ID');
    if l_id is not null then
    htp.p('{SCRIPT} var myWindow = window.open("http://myhost/portal30/pos.APPROVAL_INVOICE_DYN.show?p_arg_names=ord_id&p_arg_values=' &#0124; &#0124; l_id &#0124; &#0124; '",
    "mySubWindow","toolbar=yes,location=yes,directories=no,status=yes,menubar=yes,scrollbars=yes,resizable=yes,height=400,width=600");
    myWindow.focus();
    {SCRIPT}');
    end if;
    end;
    To do: you will need to add more logic to decide when to open a new window,
    whatever is appropriate for your application,
    rather than just 'is null' check I did.
    Hope this will help.
    Thanks,
    Dmitry

  • Key Chain - how to get my old passwords on the new system after clean inst.

    Hello,
    just switched to Tiger and took the opportunity to make a clean install, to get rid of my classic partition.
    Before I made a copy of the harddrive data with "Superduper". I managed to get back after installing almost all my preferences, mail accounts, etc., but I don´t know where I can find the Key chains from the old system (copied already the files from Library and User/Library to the new system, but it won´t work..
    Please help!!
    thankz Denz-al

    Welcome to Apple Discussions!
    I assume you clone restored your data back again from the external hard drive. If that's what you did, a more reliable method is simply to erase and install Tiger, and then use the Migration Assistant to import the data from the external hard drive over Firewire.
    http://docs.info.apple.com/article.html?artnum=25773
    But since you've done what you have, you may still be able to import the old keychain:
    http://docs.info.apple.com/article.html?artnum=25708

  • How to solve Firefox keep accessing Program Files when I open it?

    When I open Firefox, instead of showing the homepage(which is google.com for me) it bring [file:///C:/Program%20Files%20%28x86%29/Mozilla%20Firefox/]. I don't want it to be this way but I don't know how to solve it.
    please help :D

    Open a new window or tab. In the address bar, type '''about:config'''.
    If a warning screen comes up, press the '''Be Careful''' button.
    This is where Firefox finds information it needs to run.
    At the top of the screen is a search bar. Enter '''browser.newtab.url'''
    and press enter. '''browser.newtab.url'''
    tells Firefox what to show when a new tab is opened.
    If you want, right click and select '''Modify'''. You can change the setting to;
    '''about:home''' (Firefox default home page),
    '''about:newtab''' (shows the sites most visited),
    '''about:blank''' (a blank page),
    or you can enter any '''web page''' or '''about: page''' you want.
    The same instructions are used for the new window setting, listed as
    '''browser.startup.homepage'''.

  • How to solve slide to unlock hanging in my 4s

    i am experiencing a serious issue with my iphone 4s, some times(not all times) slide to unlock is not working this problem is started only after updating to the latest software  so i have to restart the phone frequently how to solve this issue

    http://m.cnet.com/news/how-to-capture-slow-motion-video-on-your-old-iphone/57604 550?ds=1

  • Ajax submit failed: error = 403, forbidden----how can solve this error

    Ajax submit failed: error = 403, Forbidden--how can solve this error to create a new eprintcenter account

    I am having the SAME problem.  This is so frustrating.   If i try to log on with teh user account I already have, I get the above message.  If i try to create a new accoutn it says the account is already existing.  If i click on forgot password, nnothing happens.  HELP!  I am stuck in a loop!!

Maybe you are looking for