How to solve NX7009 vPC member port in suspend mode?

I'm deploying a pair of new NX7009 (Sup2, F2 series 48-port 10G modules) and bunch of NX5548 (with expansion module). Connectivity between pair of NX7009 and pair of NX5548 is straight forward: 4 meshed 10G connections in between in vPC. vPC domains and all vPC port-channels are fine except one vPC port-channel between NX7009 pair and one NX5548 pair. One of the NX7009 port in the bundle is put in suspend mode every time it's enabled. The port is configured the same as any other bundled NX7009 ports and the NX5548 port on the other side of the port-channel is also configured the same as any other vPC ports.
Ports can be suspended if incompatibility exists in a port-channel. But in this case, I couldn't find any incompability about this particular NX7009 port.
Any advices? Thanks a lot

Thanks for the reply. vPC is double sided. The ports that were suspended was not physically cabled on one side. After physical connectivity came up, the ports were fine from that point on.
So it was not caused by any LACP misconfiguration. That's good to learn.
Thanks again.

Similar Messages

When i opn the you tube or any kind of video clip in the mozilla firefox the video clip is shaking completely how to solve a problem

when i opn the you tube or any kind of video clip in the mozilla firefox the video clip is shaking completely how to solve a problem

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Hi the_mad_movies,
It seems like this article will be the best option for addressing this issue:
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Unwanted signals going through RS-232 port when Analog I/O channels are being used. Why and how to solve the problem?

My application involves operating a pH meter via RS-232 protocol. Other hardware are operated using an E-series DAQ board whereby waveforms are software-generated and sent to the relevant hardware using an Analog Output channel. Data acquisition is performed utilising Analog Input channels of the DAQ card that have been configured in a Referenced Single-Ended mode. When the Analog I/O channels are active erroneous readings are observed on the pH meter if the RS-232 cable is connected between the pH meter and the control PC. No problem is observed if the RS-232 cable is disconnected. What could be the problem and any suggestions on how to solve this.

Comments to your questions:
Built-in = Originally supplied on the PC's motherboard
1)I use built-in RS-232 interface
2)I use built-in Bus type
3)The RS-232 cable is shield connected
4) I'm not sure on how to check if the RS-232's digital ground signal is connected. I simply connected the RS-232 cable from the pH meter to the serial port. The serial communication works fine, with no disturbance to the pH meter if i don't initiate data acquisition.

My external hard drive will no longer connect to my macpro......any ideas on how to solve this problem??

My external hard drive will no longer connect to my macbook pro via FW800........Any ideas on how to solve this??

Reset the SMC, see this Apple note: http://support.apple.com/kb/HT3964
Also reset the PRAM:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
In most cases, those two actions will fix the port issue. If it's still an issue, you may need to see if the external hard drive can connect to another system, to ensure it's not having problems.

How to solve Error in http connection. Error -1

urlMidlet2===http://localhost:8080/testProj?userId=20&selMPBL=23&svMPBL=IPOD+Touch+Screen+e!1!Tue+Jan+06+00:00:00+UTC+2009!Tue+Jan+06+00:00:00+UTC+2009!Sat+Jan+31+00:00:00+UTC+2009!Mp3+Player!IPOD!Rejected!12
[j2mepolish] Generic/DefaultColorPhone: !1!2!1222!13333
[j2mepolish] Generic/DefaultColorPhone: Protocol for this connection is http
[j2mepolish] Generic/DefaultColorPhone: This object is connected to localhost host
[j2mepolish] Generic/DefaultColorPhone: HTTP Port in use is 8080
[j2mepolish] Generic/DefaultColorPhone: respCode=====-1
[j2mepolish] Generic/DefaultColorPhone: Error in opening HTTP Connection. Error#-1
Why is this error coming? How to solve it?
Thanks in advance.
Edited by: J2me_Beginner on Jun 7, 2009 9:38 PM

I am making a form using an interface. When Activate the Form, I got this error:
Invalid HTTP connection: ADS
Message no. FPRUN000
But I do not know how to solve or config ADS. Any one know how to slove this error ?
Thanks a lot.

My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report:          8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
      Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE            1
com.intego.iokit.BehavioralKext            1
com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
com.intego.kext.VirusBarrierKPI            10.6.8
com.globaldelight.driver.BoomDevice            1.1
com.huawei.driver.HuaweiDataCardACMData            4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE            1
com.intego.iokit.BehavioralKext            1
com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
com.intego.kext.VirusBarrierKPI            10.6.8
com.globaldelight.driver.BoomDevice            1.1
com.huawei.driver.HuaweiDataCardACMData            4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker.

How to solve this problem javax.mail.AuthenticationFailedException

i was used in this progrm my labtop means working correctly but instead of labtop i am using the desktop means following error is occuered can any one tell to me how to solve this problem.The erroe is **javax.mail.AuthenticationFailedException**
The coding is as followes
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
public class Main
String d_email = "[email protected]",
d_password = "inst9",
d_host = "smtp.gmail.com",
d_port = "465",
m_to = "[email protected]",
m_subject = "Testing",
m_text = "Hey, this is the testing email.";
public Main()
Properties props = new Properties();
props.put("mail.smtp.user", d_email);
props.put("mail.smtp.host", d_host);
props.put("mail.smtp.port", d_port);
props.put("mail.smtp.starttls.enable","true");
props.put("mail.smtp.auth", "true");
//props.put("mail.smtp.debug", "true");
props.put("mail.smtp.socketFactory.port", d_port);
props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
props.put("mail.smtp.socketFactory.fallback", "false");
SecurityManager security = System.getSecurityManager();
try
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getInstance(props, auth);
//session.setDebug(true);
MimeMessage msg = new MimeMessage(session);
msg.setText(m_text);
msg.setSubject(m_subject);
msg.setFrom(new InternetAddress(d_email));
msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
Transport.send(msg);
catch (Exception mex)
mex.printStackTrace();
public static void main(String[] args)
Main blah = new Main();
private class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication()
return new PasswordAuthentication(d_email, d_password);
}

yes that not a my password ...but the following erroer is occured ...
run-main:
javax.mail.AuthenticationFailedException
at javax.mail.Service.connect(Service.java:319)
at javax.mail.Service.connect(Service.java:169)
at javax.mail.Service.connect(Service.java:118)
at javax.mail.Transport.send0(Transport.java:188)
at javax.mail.Transport.send(Transport.java:118)
at Main.<init>(Main.java:41)
at Main.main(Main.java:51)
BUILD SUCCESSFUL (total time: 3 seconds)
I am using the netbeand 5.5

How to solve the error HTTP/S connection was not obtained successfully?

Hi,
I got a problem when i am trying to connect SAP ECC 6.0 system from SAP NETWEAVER EP 7.1 as below
ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (vrleccdv.vrpl.com:8000)
6. The host name vrleccdv.vrpl.com was resolved successfully.
7. An HTTP/S connection to http://vrleccdv.vrpl.com:8000/sap/bc/gui/sap/its/webgui/ was not obtained successfully; this might be due to a closed port on the Firewall.
can anyone suggest me how to solve this porblem

Hi Ramana,
In the Backend system pls check whether the service WEBGUI is activated or not.
This will help solve the problem.
Cheers-
Pramod

How to solve Oracle SQL Developer connection problem ?

Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?

user8860348 wrote:
Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?username: sys
password: enter_your_correct_password given at the time of oracle installation
role: select sysdba if you would connect as sysdba else select normal for users other than sys
hostname: enter your oracle server hostname or ip address eg:- 192.168.11.12
to find the hostname open terminal/command prompt in oracle installed machine
type ---> hostname
type ---->ping hostname
you can find the ipaddress of the server
port number: 1521 (default) ----> i guess , else check the port number in the tnsnames.ora file under your ORACLE_HOME/network/admin folder
SID: DB1
try it
Good Luck

Hi guys, I have a problem with imessage. My iphone 4S is factory unlocked and i have been using t-mobile carrier. i tried settings - messages - imessage on but there is this 'waiting for activation' thing. Does anyone know how to solve this? Thanks!

Hi guys, I have a problem with imessage. My iphone 4S is factory unlocked and i have been using t-mobile carrier. i tried settings - messages - imessage on but there is this 'waiting for activation' thing. Does anyone know how to solve this?
Thanks!

If you are in the UK:
Please upgrade your plan to Web n Walk plus. One of our users on T-Mobile UK had this to report back to us:
T-Mobile UK are in fact port blocking to ensure fair usage on their base Web and Walk Plan. I have upgraded to Web and Walk Plus and as a result the port blocks are lifted and I get a higher data allowance!
We were also recently contacted by T-Mobile UK, who stated the following:
Any smart phone (iphone, android etc) that is bought directly from T-Mobile should be automatically provisioned with Web n Walk plus, if customers have bought a handset sim free then they will need to call customer services and get this added. It is free of charge for most price plans (including new plans) but some older plans will generate a charge of £5pm for this.

How to solve the emca error

how to solve the warning and severe error....................
[oracle@ip-********* Oracle11g_R2]$ emca -deconfig dbcontrol db -repos drop
STARTED EMCA at Mar 29, 2012 10:20:41 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: testdb11g3
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
Mar 29, 2012 10:22:13 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_22_20_40.log.
Mar 29, 2012 10:22:13 PM oracle.sysman.emcp.EMDBPreConfig performDeconfiguration
WARNING: EM is not configured for this database. No EM-specific actions can be performed.
Mar 29, 2012 10:22:13 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM
Configuration Assistant again .
Refer to the log file at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_22_20_40.log for more details.
Could not complete the configuration. Refer to the log file at
/u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_22_20_40.log for more details.
[oracle@ip-******* Oracle11g_R2]$ cd

tried but getting the same error.............
[oracle@ip-10-68-199-69 oracle]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 29-MAR-2012 23:37:21
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u02/oracle/Oracle11g_R2/product/11.2.0/dbhome_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /u02/oracle/Oracle11g_R2/product/11.2.0/dbhome_1/network/admin/listener.ora
Log messages written to /u02/oracle/Oracle11g_R2/diag/tnslsnr/ip-10-68-199-69/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 29-MAR-2012 23:37:21
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/oracle/Oracle11g_R2/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u02/oracle/Oracle11g_R2/diag/tnslsnr/ip-10-68-199-69/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@ip-10-68-199-69 oracle]$ sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Thu Mar 29 23:37:34 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter user-name: sys/Ashwin
ERROR:
ORA-28009: connection as SYS should be as SYSDBA or SYSOPER
Enter user-name: sys/Ashwin as sysdba
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> shutdown abort
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 1603411968 bytes
Fixed Size 2213776 bytes
Variable Size 402655344 bytes
Database Buffers 1191182336 bytes
Redo Buffers 7360512 bytes
Database mounted.
Database opened.
SQL> exit
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@ip-10-68-199-69 oracle]$ emca -deconfig dbcontrol db -repos drop
STARTED EMCA at Mar 29, 2012 11:55:28 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: testdb11g3
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
Mar 29, 2012 11:55:57 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_23_55_27.log.
Mar 29, 2012 11:55:57 PM oracle.sysman.emcp.EMDBPreConfig performDeconfiguration
WARNING: EM is not configured for this database. No EM-specific actions can be performed.
Mar 29, 2012 11:55:57 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_23_55_27.log for more details.
Could not complete the configuration. Refer to the log file at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_23_55_27.log for more details.

How to solve the build fail error when the file below mention cant be found

Hi,
i got this build fail but i cant find where the error came from and how to solve it. im stucked at this problem for quite a long time.
BUILD FAILED
C:\Infrastructure\Infrastructure\Ant\build.xml:52: The following error occurred while executing this line:
C:\Infrastructure\Infrastructure\DBSchema\build.xml:262: C:\Infrastructure\Infrastructure\Ant\OracleMiddlewarejdeveloper\modules\oracle.adf.share_11.1.1 not found
Is there any solutions to it??
Rgds,
lx

Below are my codes for the build.properties.
# Base Directory for library lookup
jdeveloper.home=C:\Oracle\Middleware\jdeveloper
src.home=..//..
# JDBC info used to create Schema
jdbc.driver=oracle.jdbc.OracleDriver
jdbc.urlBase=jdbc:oracle:thin:@localhost
jdbc.port=1521
jdbc.sid=fypj
# Information about the default setup for the demo user.
db.adminUser=system
db.demoUser=fusion
db.demoUser.password=oracle
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP

TS4002 Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4 SMTP err

Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

How to solve NX7009 vPC member port in suspend mode?

Similar Messages

Maybe you are looking for