How to solve *ORA-28365: wallet is not open*

hello frined
please any one can tell me how to open wallent please tell solution of this error
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup plus archivelog command at 12/07/2009 09:11:15
ORA-19914: unable to encrypt backup
ORA-28365: wallet is not open
i dont know the password of wallet :( how can i chenage or know password
thanks
kashif ahmed
Edited by: user8285127 on Dec 6, 2009 9:41 PM

Hi,
I request to go through the below links, since it will give an idea, I think you have not yet created the wallet as per knowledge from you post.
http://www.oracle-base.com/articles/10g/SecureExternalPasswordStore_10gR2.php
http://www.packtpub.com/article/oracle-wallet-manager
http://download.oracle.com/docs/cd/B13789_01/network.101/b10772/asowalet.htm
It will hardly some time, but it will gain knowledge how to use it. Don't skip it.
- Pavan Kumar N
Oracle 9i/10g - OCP
http://oracleinternals.blogspot.com/

Similar Messages

  • Oracle wallet ORA-28365: wallet is not open error,ORA-19914: unable to encr

    Hi,
    When i am going to take the backup i got the following error,
    RMAN> run
    2> {
    3> allocate channel d1 device type disk format '
    4> D:\oracle\backup1\%U';
    5> allocate channel d2 device type disk format
    6> 'D:\oracle\backup1\%U';
    7> backup database plus archivelog;
    8> }
    allocated channel: d1
    channel d1: sid=145 devtype=DISK
    allocated channel: d2
    channel d2: sid=130 devtype=DISK
    Starting backup at 30-MAR-12
    current log archived
    channel d1: starting archive log backupset
    channel d1: specifying archive log(s) in backup set
    input archive log thread=1 sequence=22 recid=1 stamp=779302414
    input archive log thread=1 sequence=23 recid=2 stamp=779307542
    channel d1: starting piece 1 at 30-MAR-12
    channel d2: starting archive log backupset
    channel d2: specifying archive log(s) in backup set
    input archive log thread=1 sequence=24 recid=3 stamp=779308443
    channel d2: starting piece 1 at 30-MAR-12
    RMAN-03009: failure of backup command on d1 channel at 03/30/2012 18:34:05
    ORA-19914: unable to encrypt backup
    ORA-28365: wallet is not open
    continuing other job steps, job failed will not be re-run
    released channel: d1
    released channel: d2
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup plus archivelog command at 03/30/2012 18:34:05
    ORA-19914: unable to encrypt backup
    ORA-28365: wallet is not open
    Please anyone suugest on this
    Thanks
    Anup

    Hi,
    Looks like some objects are encrypted, and you can´t backup them because the wallet is closed.
    You should open Wallet to proceed with backup, by doing this command:
    ALTER SYSTEM SET ENCRYPTION WALLET OPEN IDENTIFIED BY "YOURPASSWORD";
    Hope this helps.
    Regards,

  • How to solve this problem? '' can not activate cellular data network failure'' authenticating PDP  from already thank you

    how to solve this problem? '' can not activate cellular data network failure'' authenticating PDP  from already thank you

    What does this have to do with using an iPhone in an enterprise environment?
    What carrier are you using and where did you get the phone?

  • ORA-28367: wallet does not exist  Re-Post From SQL PL/SQL

    Hi all
    Please Help about this
    The Detail of Sqlnet.ora file
    and Wallet is under wallet Directory
    ENCRYPTION_WALLET_LOCATION = (SOURCE = (METHOD=FILE) (METHOD_DATA =
    (DIRECTORY = d:\oracle\product\10.2.0\admin\ORA10DB\wallet)))
    But i want to Alter Through SYS then Error Msg is Apr as
    ALTER SYSTEM SET ENCRYPTION WALLET OPEN AUTHENTICATED BY "a0000000"
    ERROR at line 1:
    ORA-28367: wallet does not exist

    ORA-28367:     wallet does not exist
    Cause:     The Oracle wallet has not been created or the wallet location parameters in sqlnet.ora specifies an invalid wallet path.
    Action:     Verify that the WALLET_LOCATION or the ENCRYPTION_WALLET_LOCATION parameter is correct and that a valid wallet exists in the path specified.
    ~ Madrid

  • ORA-28367: wallet does not exist

    Hi all
    Please Help about this
    The Detail of Sqlnet.ora file
    and Wallet is under wallet Directory
    ENCRYPTION_WALLET_LOCATION = (SOURCE = (METHOD=FILE) (METHOD_DATA =
    (DIRECTORY = d:\oracle\product\10.2.0\admin\ORA10DB\wallet)))
    But i want to Alter Through SYS then Error Msg is Apr as
    ALTER SYSTEM SET ENCRYPTION WALLET OPEN AUTHENTICATED BY "a0000000"
    ERROR at line 1:
    ORA-28367: wallet does not exist

    This question is not related to SQL or PL/SQL, but to the database & network configuration.
    Suggest that you ask this in the appropriate forum.

  • How to solve this soft will be not installed because hp recovery cannot be found in your system

    how to solve this soft will be not installed because hp recovery cannot be found in your system
    i dont know how to solve this and i dont know how big company like HP didnot make solution for this problem 
    i hope to find solution for this problem 
    ( HP Pavilion dv6-6120se )  this is my computer name

    Hi,
    I can't see the image and may be won't be able to see it fox next 24hrs. You need Admin/moderator of this forum to approve it before other can see and today is a public holiday in the US.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My Arabic keyboard is missing letter it is different of my iPhone 3 and I pad how to solve the problem it is not only mine it is most of the iphone4

    My Arabic keyboard is missing letter it is different of my iPhone 3 and I pad how to solve the problem it is not only mine it is most of the iphone4

    Najsar wrote:
    My Arabic keyboard is missing letter
    No, it's not.  You get extra letters by holding down the existing keys and selecting them from the popup menu which appears.

  • How to solve ORA-01843: not a valid month error

    i am gettion ORA-01843: not a valid month error how to solve it. and how to find which record causing
    proble.
    Thanks in advance.

    EdStevens wrote:
    Ramin Hashimzadeh wrote:
    user1571313 wrote:
    i am gettion ORA-01843: not a valid month error how to solve it. and how to find which record causing
    proble.
    Thanks in advance.Bring for me something from somewhere... :)Bring me a shrubbery.
    When you have found the shrubbery, then you must cut down the mightiest tree in the forest ... with a herring.We are no longer the knights who say ni! We are now the knights who say "i am gettion ORA-01843"!

  • How to solve the error:  "lightroom could not import this catalog because of an unknown error" when trying to "import from catalog"?

    I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
    I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!! 
    Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

    OK, my starting point is that LR can happily contain 400000+ photos, and it's a mistake to create a 1 star plus catalogue as you suggest. Instead, I'd recommend you create a master catalogue of all your photos, which you can then query however you want - 2 star, or a certain keyword, or with "xyz" in the title etc.
    If you are intent on going that way, you could try a slight change from what you've done so far. Instead of trying to import an entire catalogue and then delete no-star pictures, take the 2014 and 2012 catalogues and select only the 1 star photos. Then do an Export as Catalog for these items, and import the 2014-1star and 2012-1star into your new catalogue. That may get you past the problem images which I suspect are the problem.
    If that doesn't work, or if you follow my initial advice, you're going to need to identify the image where the failure occurs. You may have a corrupt image file, and replacing it from your backup may be sufficient to resolve the problem. Alternatively, it may be a corrupt record in the catalogue, and in this case it may be sufficient to remove the image from the catalogue and import it again. You might try selecting everything in the 2014 catalogue and seeing if you can do an Export as Catalog, creating a clean 2014, and deleting 2014's previews folder might also get rid of a potential problem. Something else is to try the Export as Catalog for images 1-40000, then a second Export as Catalog for images 40002-50k.
    So a few things you'll need to try, rather than a magic bullet, and a recommendation to change the underlying direction.
    John

  • How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

    Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

    All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
    Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
    Message was edited by: modular747

  • How Do I Correct FF GUI From Not Opening After Computer Restart

    Every time I restart my Win8 and then FF, the FF GUI does not open (i.e. the browser window does not appear) although Task M shows FF as running. Only work around so far is to re-install FF (obviously using another browser to access the download install site). I tried disabling all add-ins and this had no affect. Even if I exit FF before restarting the computer, the same issue occurs. If I exit FF but do not restart the computer, FF will re-start normally, meaning the browser window appears.
    This started occurring a couple of weeks ago. At that time I did a System Restore back to a point before it started happening and that did not correct the issue.
    I also uninstalled FF keeping my settings but the issue remained when I re-installed FF. I even went to the extreme of uninstalling and not keeping my settings and then reinstalling and adding my add-ins and setting my options (a couple hours of work) and the issue still remained.
    Once it is open I see no problems with it or any add-ins.

    Hi,
    From your issue description I understand that, you are unable to open any applications and the computer freezes.
    I can imagine the inconvenience you have experienced. Don’t worry; we will certainly help you.
    I would appreciate if you could answer the following question:
    1. What is the make and model of your computer?
    2. Did you receive the windows 8 preinstalled with the computer?
    3. What happens when you try to perform Refresh or Reset? Do you receive nay error messages?
    Let’s try some steps before performing Refresh or Reset.
    Follow these methods and check if it fixes the issue.
    Method 1: Run the Performance troubleshooter and check if the issue persists.
    Follow the steps to run the troubleshooter:
    a. Press Windows key + C on your keyboard to show the Charms bar.
    b. Type Troubleshooting and click Troubleshooting under Settings.
    c. Now type Performance Troubleshooter in the search option.
    d. Click on Performance troubleshooter to run the troubleshooter.
    Method 2: Start your computer in safe mode and check if the computer freezes.
    Step 1: Refer this link to start the computer in safe mode.
    http://windows.microsoft.com/en-IN/windows-8/windows-startup-settings-including-safe-mode
    If it works fine in safe mode, perform clean boot.
    Step 2: Perform clean boot.
    Clean boot will help us identify if any third party applications or startup items are causing the issue.
    To do this, follow steps from this link:
    http://support.microsoft.com/kb/929135
    NOTE: After checking the functionality in clean boot, configure Windows to use Normal startup. Refer step 3 from the above link for details.
    Method 3: Restore your PC to an earlier point in time.
    a. Swipe in from the right edge of the screen, and then tap Search.
    b. (If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Search.) Enter Recovery in the search box, tap or click Settings, and then tap or click Recovery.
    c. Tap or click Open System Restore, and follow the prompts.
    To perform refresh, or reset, refer to this link: How to restore, refresh, or reset your PC
    http://windows.microsoft.com/en-IN/windows-8/restore-refresh-reset-pc
    Refresh Warning: The apps that came with your PC or you installed from Windows Store will be reinstalled, but any apps you installed from other websites and DVDs will be removed. Windows puts a list of the removed apps on your desktop after refreshing your PC.
    Reset Warning: All of your personal files will be deleted and your settings will be reset. Any apps the came with your PC will be reinstalled, but all other apps will be removed.
    Hope this helps. If the issue persists or any Windows related queries or issues related to Windows Operating system, please get back to us. We are here to assist you.

  • I keep getting an error on my MAC when i try to open any and all JPG FILES.  How do I correct  Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent

    Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
    that is the message how do i correct this problem

    It sounds like your file associations are messed up and Reader is trying to open your .jpg files. Is this correct?
    If so, you just need to change the associations to choose what application opens them. Here's how: Change File Associations in Mac OS X

  • How I fixed Finder Crash, dmg's not opening and 2 apps not working?

    I have to say a big thank you to this forum because I was having some big problems and was told to do a fresh install which I did but then when I migrated my main account over the problem kept happening.
    My Quicktime and itunes would not work and finder would crash and dmg's would not open properly. I typed in Finder crash and found a lot of helpful information for the finder crash part.
    First I looked the report for both itunes and Quicktime and found they had the same error:
    the QT symbol couldn't be found (Expected in: /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime)
    so I trashed my Quicktime (there was probably an easier way but I wasn't sure what that was) and then reinstalled it from apple and once that was done both Quicktime and itunes were working fine (after doing a software update).
    Then thanks to iBod who gave this advice when Finder crashes using right click as mine did all the time:
    That normally means you have an incompatible menu plugin. Check these 2 locations and move anything present onto your Desktop to disable it:
    /Users/YourUsername/Library/Contextual Menu Items/
    /Library/Contextual Menu Items/
    I did this and voila I'm back and running.

    Dude...worked like a champ. I uninstalled something small (Tank Cannon Game). Reinstalled. Everything works now, including loopt (which was my initial indicator as well).
    Thanks again.

  • How come photshop elements 13 organizer will not open.

    I have been using element 13 for about a week and last night I tried to open it and the organizer will not open.  I have uninstalled and reinstalled I have shut down all firewall I need some help.  Seems the Adobe does not really have much help.

    First be sure you are opening the actual .exe/application file for the organizer rather than going through the welcome screen. It will be in either the program files>adobe or your Applications folder on a mac. Try holding down the shift key while opening it to bring up the catalog manager. If that works, select your catalog, then Repair, then Optimize.

  • My iphone is lost .is iphone 4S.How can I find it.Positioning is not open .

    Positioning is not open.Can not find do it

    Thank you..they told me
    "hank you very much for your inquiry. I am Kawasaki. I would be grateful if you kindly let me explain your inquiry.
    I am terribly sorry for the inconvenience.
    Yet, to our regret, no au-smartphone can be used without having our cell-phone contract as of now.
    Moreover, we are afraid that any au iPhone is locked when you insert any SIM card of another company brand in it; in other words, every single au iPhone has the carrier lock on it, and there is no way to unlock au iPhone at this moment for any reasons whatsoever.
    I am sorry for being unable to be of assistance to you right now."
    can i use this site to unlock my iphone https://www.officialiphoneunlock.co.uk/

Maybe you are looking for