How to solve problem with where-used list?
I've the problem that in many places of my FPM (floorplan manager, web dynpro) code the where-used list does not work anymore because the FPM functions force the developer to specify structure of column names by literals. So for example in the UIBB's GET_DEFINITION methods or when using the following piece of code in some PROCESS_EVENT function:
CASE io_event->mv_event_id.
WHEN if_fpm_guibb_list=>gc_guibb_list_on_cell_action.
io_event->mo_event_data->get_value(
EXPORTING
iv_key = if_fpm_guibb_list=>gc_event_par_column_name
IMPORTING
ev_value = lv_col_name
if ( lv_col_name = 'FOO' ).
endif.
endcase.
Here one must comapare (line 9) the variable lv_col_name with some literal containing the name of an element of a structure. So the where-used list on STRUCT-FOO does not find this source. Is there any way to fix this problem? I thought to use RTTI for it, but could not find any way to do this. Possibly, is there any pragam or pseudo comment to update the where-used list of a specific structure at a given place?
The point is that when I start using RS_ABAP_SOURCE_SCAN I have to remember to do this I don't like the situation that after changing some name of a structure's element, the source code of the whole application is correct, no error will occur but the behaviour of the application may be totally wrong. Possibility a better solution will be to add some constants containing the structure element names to the model class of the FPM application.
Similar Messages
-
Short dump with Where-used list
Hi All,
I'm making some research on specific InfoObjects, and in some cases I want to know where are they being used, but when I try to use the icon for "Where-used list using Data Warehouse" I end up with an error, a short dump.
Message class is: RSQBW
Trigger Location of Runtime Error:
Program: CL_RSQ_ISET_SERVICE===========CP
Include: CL_RSQ_ISET_SERVICE===========CM016
Row: 136
Module Type: (METHOD)
Module Name: EXTEND_FIELD_BUFFER
Does any one can help me to understand why is this going on and how to solve this?
Thank you!!
MiriamHi Miriam
In the short dump you should also see the name of the infoset in question.
You probably have to adjust the infoset in transaction RSISET and they try to run the where used list again.
Best Regards,
Vincent -
How to mass get material where-used list
Dear Experts,
Prsently, we can get material where-used list one by one by CS15, and then we want to mass get them for many of materirlas once.
Could you give me a good idea?
Thanks and best Regards,
Colin.Hi,
You would need to use the FM - CS_WHERE_USED_MAT or CSEP_MAT_BOM_SELECT_WHERE_USED in a Z program & you will be able meet your need.
However a word of caution, the run time will be long if you run for several materials a time. Good luck.
Regards,
Vivek -
How to solve problem with JSF table's border (style) ??
Hi, I would like to create table in JSF like this
<table align="center"
width="250"
style="border-collapse: collapse; border: 1px black solid;" >
<tr>
<td align="center"
colspan="2"
style="border: 1px black solid;">
Header A
</td>
</tr>
<tr>
<td> a1 </td>
<td> a2 </td>
</tr>
<tr>
<td> b1 </td>
<td> b2 </td>
</tr>
<tr>
<td align="center"
colspan="2"
style="border: 1px black solid;" >
<BUTTON value="12" > button1 </BUTTON>
<BUTTON value="12"> button2 </BUTTON>
</td>
</tr>
</table>I don't know how to create borders like this with JSF's components.
I know how to create table and collspan, but I have a problem with
border and style.
below is example that I creat it, but borders are not OK
IF ANYONE FIND SOLUTION I WILL BE TANKFUL
JSF:
<hx:panelBox id="box1"
layout="pageDirection"
bgcolor="silver"
align="center"
style="border: 1px red solid;"
border="0">
<hx:panelBox id="box2" layout="pageDirection" width="100%" bgcolor="#aec74e" height="100%" align="center" style="border: 1px black solid;">
<center>
<h:outputText styleClass="outputText" id="text9" value="Prazniki"></h:outputText>
</center>
</hx:panelBox>
<h:panelGrid styleClass="panelGrid" id="grid1" columns="3">
<h:outputText styleClass="outputText" id="text4" value="#{msgs.planDan}">
</h:outputText>
<h:inputText styleClass="inputText" id="text3" value="#{pc_Koledar.praznikBean.dan}">
</h:inputText>
<f:verbatim></f:verbatim>
<h:outputText styleClass="outputText" id="text5" value="#{msgs.planMesec}">
</h:outputText>
<h:selectOneMenu styleClass="selectOneMenu" id="menu1" value="#{pc_Koledar.praznikBean.selectedMesec}">
<f:selectItems value="#{pc_Koledar.praznikBean.meseci}" />
</h:selectOneMenu>
<f:verbatim></f:verbatim>
<h:outputText styleClass="outputText" id="text6" value="#{msgs.planLeto}">
</h:outputText>
<h:inputText styleClass="inputText" id="text2" value="#{pc_Koledar.praznikBean.leto}">
</h:inputText>
<f:verbatim></f:verbatim>
<h:outputText styleClass="outputText" id="text7" value="#{msgs.nazivPraznika}">
</h:outputText>
<h:inputText styleClass="inputText" id="text1" value="#{pc_Koledar.praznikBean.nazivPraznika}">
</h:inputText>
<f:verbatim></f:verbatim>
</h:panelGrid>
<hx:panelBox id="box3"
align="center"
layout="lineDirection"
width="100%"
style="border: 1px black solid;" bgcolor="#aec74e">
<center>
<hx:commandExButton type="submit" value="Dodaj" id="button1" action="#{pc_Koledar.doButton1Action}" lang="CP1250">
</hx:commandExButton>
<hx:commandExButton type="submit" id="button3" action="#{pc_Koledar.doButton3Action}" value="Prika�">
</hx:commandExButton>
</center>
</hx:panelBox>
</hx:panelBox>Couldn't you use styleClass or id for CSS?
-
How to solve problem with Macbook/Boxee/TV?
I have connected my macbook to my TV using an adaptor cable, and I have downloaded Boxee. I am able to see my computer screen on the TV, though it appears as a doubled version of it in which software does not run. This doubled screen is to the right of my normal computer screen. I can, for example, open Safari on my computer and drag the browser to the right (offscreen on my computer) and it will show up on my TV. I cannot see the Boxee program at all when I open it on my computer, as it does not drag and drop.
Any thoughts? Is this a problem with my connection cable, and how I've attached the Macbook to the TV? Is this a problem with the display of my MacBook and/or Spaces? I am stumped.
Thanks for your help.You have the display set in "extended desktop" mode. In "System Preferences">"Display" there should be an "Arrangement" tab when you have the TV hooked up to the MacBook and both screens working. Do you see two monitors side by side? One of them will have a "Menu Bar" at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. When you disconnect from the TV your Menu bar will automatically change back to the MacBook.
-
How to solve problem with Installer Package for itunes
Hi! I'm attempting to upadte itunes so I can get the latest software for my iphone. It's a 3GS. Every time when ready to instal it says I have a problem with the installer package - something is missing. What can I do to solve this?
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL >
Add n Remove Programs(XP)
Programs n Features(Win7/Vista)
highlight ASU and click CHANGE then REPAIR, -
Hi All,
I want to change a smart form interface, before that I have to know where used list of this smart form but I can't. Could any one tell me how I can see the where used list of smart form.
thanks in advance
chetan vishnoiHello,
the previous suggestions won't work because smartforms are usually used with a dynamic function call.
I have the following suggestions:
1) Go to SE37 and display the where-used list of function SSF_FUNCTION_MODULE_NAME. Now find the entries where input parameter FORMNAME equals the name of your smartform.
2) Change the interface of the smartform such that it is still compatible to the previous version, i.e. all new parameters are optional. If you want to change the type of a parameter, create a new parameter instead. You could then alter the coding in the following way:
IF NOT parameter_old IS INITIAL.
MESSAGE 'Interface has changed' TYPE 'E' RAISING ERROR_OCCURRED.
ENDIF. -
Multi level where used list (cs_where_use_mat)
How to get Multi level where use list of a component?
CS_WHERE_USE_MAT has details of a material. but i need to dig where use list for all materials of that component. CS15 does not give compleate details(only few fields are there)Check the below program :
REPORT ZPPR_BOM_INFOL_REPORT no standard page heading
line-size 160
line-count 60.
======================================================================
Program Name : ZPPR_BOM_INFOL_REPORT
Table definition *
TABLES: mast,
stko,
stpo,
T418,
makt.
TYPE - POOLS
TYPE-POOLS: slis.
Constants
constants : c_tcode(4) type c value 'CS03',
gc_formname_top_of_page TYPE slis_formname
VALUE 'TOP_OF_PAGE'.
Variables
data : v_maktx like makt-maktx,
wa_stko like stko.
DATA:
Objekttyp 'Material'
otyp_mat(1) TYPE c VALUE '1',
ootyp_mat(1) TYPE c VALUE 'M',
Objekttyp 'kein Objekt'
otyp_noo(1) TYPE c VALUE '2',
Objekttyp 'Dokument'
otyp_doc(1) TYPE c VALUE '3',
Objekttyp 'Klasse'
otyp_kla(1) TYPE c VALUE '4',
Objekttyp 'Intramaterial'
otyp_ntm(1) TYPE c VALUE '5'.
maximal anzeigbare Menge
data: max_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999',
ueberl_kz(1) TYPE c VALUE '*',
min_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999-',
b_flag(1) TYPE c VALUE 'X',
ecfld(250) TYPE c,
v_flag type c.
ALV Variables
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
gs_layout TYPE slis_layout_alv,
gs_keyinfo TYPE slis_keyinfo_alv,
gt_sp_group TYPE slis_t_sp_group_alv,
gt_events TYPE slis_t_event.
DATA: g_repid LIKE sy-repid.
DATA: gt_list_top_of_page TYPE slis_t_listheader,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
g_save(1) TYPE c,
gx_variant LIKE disvariant,
g_variant LIKE disvariant,
g_default(1) TYPE c,
g_exit(1) TYPE c.
Includes *
INCLUDE .
Internal Table Declaration *
DATA: t_mast LIKE STANDARD TABLE OF mast WITH HEADER LINE.
*DATA: t_makt LIKE STANDARD TABLE OF makt WITH HEADER LINE.
BOM Function module Related
DATA: t_matcat LIKE cscmat OCCURS 0 WITH HEADER LINE.
Internal Table for Level by Level Function module
DATA: t_stb LIKE stpox OCCURS 0 WITH HEADER LINE.
Get the Relevant data from FM
DATA: BEGIN OF hd_tab OCCURS 0,
stufe LIKE stpox-stufe,
vwegx LIKE stpox-vwegx,
END OF hd_tab.
Final Output
DATA: BEGIN OF alv_stb OCCURS 0.
INCLUDE STRUCTURE stpox_alv.
DATA: info(3) TYPE c,
END OF alv_stb.
DATA: BEGIN OF stb_orig.
INCLUDE STRUCTURE stpox.
DATA: END OF stb_orig.
DATA: BEGIN OF stb_add.
INCLUDE STRUCTURE stpol_add.
DATA: END OF stb_add.
Internal Table for STPO
*-- BOM Line item
TYPES: BEGIN OF ty_stpo,
stlty TYPE stpo-stlty,
stlnr TYPE stpo-stlnr,
stlkn TYPE stpo-stlkn,
stpoz TYPE stpo-stpoz,
idnrk TYPE stpo-idnrk,
meins TYPE stpo-meins,
menge TYPE stpo-menge, "Component Qty
END OF ty_stpo.
DATA: t_stpo TYPE STANDARD TABLE OF ty_stpo WITH HEADER LINE.
*-- BOM Header
TYPES: BEGIN OF ty_stko,
stlty TYPE stko-stlty,
stlnr TYPE stko-stlnr,
stlal TYPE stko-stlal,
stkoz TYPE stko-stkoz,
bmein TYPE stko-bmein,
bmeng TYPE stko-bmeng,
END OF ty_stko.
DATA: t_stko TYPE STANDARD TABLE OF ty_stko WITH HEADER LINE .
data : t_makt like makt occurs 0 with header line.
DATA: BEGIN OF cl_clstab OCCURS 0, "YHG079407
class LIKE klah-class, "YHG079407
klart LIKE klah-klart, "YHG079407
chked LIKE csdata-xfeld, "YHG079407
noobj LIKE csdata-xfeld, "YHG079407
dsply LIKE csdata-xfeld, "YHG079407
END OF cl_clstab.
*-- Header table
TYPES: BEGIN OF ty_main_material,
matnr TYPE mast-matnr, "Material
werks TYPE mast-werks, "Plant
maktx TYPE makt-maktx, "Description
stlal TYPE mast-stlal, "Alternative BOM
stlnr TYPE stko-stlnr, "BOM Number
bmein TYPE stko-bmein, "UOM
bmeng TYPE stko-bmeng, "Base Qty
expand(1) TYPE c, "Expanding Field
END OF ty_main_material.
DATA: t_main_material TYPE STANDARD TABLE OF ty_main_material WITH
HEADER LINE.
*-- Item (Component) Table
TYPES: BEGIN OF ty_item_material,
matnr TYPE mast-matnr, "Material
werks TYPE mast-werks, "Plant
idnrk TYPE stpo-idnrk, "Component (Material)
maktx TYPE makt-maktx, "Description
stlal TYPE mast-stlal, "Alternative BOM
stlnr TYPE stpo-stlnr, "BOM Number
meins TYPE stpo-meins, "UOM
menge TYPE stpo-menge, "Base Qty
END OF ty_item_material.
DATA: t_item_material TYPE STANDARD TABLE OF ty_item_material WITH
HEADER LINE.
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_werks LIKE marc-werks DEFAULT '1000' OBLIGATORY.
SELECT-OPTIONS s_stlal FOR mast-stlal .
SELECT-OPTIONS s_stlan FOR mast-stlan DEFAULT '1'.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bomlst RADIOBUTTON GROUP g1 DEFAULT 'X'.
SELECT-OPTIONS s_matnr FOR mast-matnr.
SELECTION-SCREEN SKIP.
PARAMETERS: p_compon RADIOBUTTON GROUP g1.
SELECT-OPTIONS: s_idnrk FOR stpo-idnrk.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
selection-screen begin of block b03 with frame title text-b03.
selection-screen begin of line.
selection-screen comment 1(40) text-005.
parameters: p_all radiobutton group r1 default 'X'.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(40) text-006.
parameters: p_one radiobutton group r1 .
selection-screen end of line.
selection-screen end of block b03.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b3.
At slection screen events *
*-- Process on value request
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
Intitialisation
INITIALIZATION.
g_repid = sy-repid.
g_tabname_header = 'T_MAIN_MATERIAL'.
g_tabname_item = 'T_ITEM_MATERIAL'.
*-- define keyinformation
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'MATNR'.
gs_keyinfo-item01 = 'MATNR'.
PERFORM e03_eventtab_build USING gt_events[].
PERFORM e04_comment_build USING gt_list_top_of_page[].
PERFORM e07_sp_group_build USING gt_sp_group[].
PERFORM e08_layout_build USING gs_layout.
Set Options: save variants userspecific or general
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = gx_variant-variant.
ENDIF.
S T A R T - O F - S E L E C T I O N *******************
start-of-selection.
if p_all = 'X'.
Get the data from MAST and MAKT Table
if p_bomlst = 'X'.
Get the data Based On Material #
perform get_data.
else.
Get the data Based On Component
perform get_data_component.
endif.
else.
Get the Single Level Report
*-- Moved the fiedl catalog here inorder to change the layout based on
*-- Selection
PERFORM e01_fieldcat_init USING gt_fieldcat[].
PERFORM select_data.
endif.
E N D - O F - S E L E C T I O N *******************
end-of-selection.
if p_one = 'X'.
perform alv.
endif.
User Command
at line-selection.
Interactive to CS03 Transaction
case sy-ucomm.
when 'PICK' or 'F2'.
if not alv_stb-idnrk is initial .
if not alv_stb-werks is initial.
if not alv_stb-objty is initial.
SET PARAMETER ID 'MAT' FIELD alv_stb-idnrk.
SET PARAMETER ID 'WRK' FIELD alv_stb-werks.
SET PARAMETER ID 'CSV' FIELD alv_stb-OBJTY.
call transaction c_tcode and skip first screen.
endif.
endif.
endif.
clear alv_stb.
endcase.
*& Form get_data
Get data from MAST and MAKT Table
FORM get_data.
data : wa_lines type sy-index.
REFRESH : T_MAST,
t_STB,
t_MATCAT,
alv_STB.
CLEAR : T_MAST,
t_STB,
t_MATCAT,
alv_STB.
Get the data from MAST Table
Get all the information from MAST - BOM Table
SELECT * FROM mast INTO TABLE t_mast WHERE matnr IN s_matnr AND
werks = p_werks AND
stlan IN s_stlan AND
stlal IN s_stlal.
describe table t_mast lines wa_lines.
if wa_lines is initial.
Write:/2 'List contains no data'.
stop.
endif.
loop at t_mast.
clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
if sy-tabix ne 1.
skip 1.
endif.
End of Change Seshu
Get the material Description
select single maktx from makt into v_maktx
where matnr = t_mast-matnr
and spras = 'E'.
Get the material details from STKO Table
select single * from stko into wa_stko
where STLTY = 'M'
and STLNR = t_mast-stlnr
and STLAL = t_mast-stlal.
Main Header for Each Material
format color 5 on.
write:/2 'Material',20 'Material Description',65 'Alternative BOM',
90 'Base Qty', 115 'Base Unit'.
format color 5 off.
format color 1 on.
write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
115 wa_stko-BMEIN.
format color 1 off.
Use the Function Module and get the format level by level
perform get_level_level.
endloop.
ENDFORM. " get_data
Top of page *
top-of-page.
perform report_header .
*& Form report_header
text
--> p1 text
<-- p2 text
FORM report_header.
new-page line-size 160 .
format color col_heading intensified on.
write:/ sy-uline(160) .
*--- Write Company Name.
perform calc_col_and_write using text-h00
sy-linsz.
*--- Write Report Title.
perform calc_col_and_write using sy-title
sy-linsz.
*--- Write User Id, Date / Time, Program Id, Page etc.
perform write_other_hdr_details.
write:/ sy-uline(160) .
ENDFORM. " report_header
*& Form calc_col_and_write
text
-->P_TEXT_H00 text
-->P_SY_LINSZ text
FORM calc_col_and_write USING P_TEXT
P_LINSZ.
data: col1 type i,
col2 type i,
len type i,
str type i.
str = strlen( p_text ).
col1 = ( p_linsz / 2 ) - ( str / 2 ) .
len = p_linsz - col1 - 2.
write: at /1 '|'.
write: at col1 p_text,
at sy-colno(len) space.
write at 160 '|'.
ENDFORM. " calc_col_and_write
*& Form write_other_hdr_details
text
--> p1 text
<-- p2 text
FORM write_other_hdr_details.
data: col1 type i,
col2 type i,
len type i.
col1 = 3.
write:/1 '|'.
write: at col1 'UserId : ',
sy-uname.
len = sy-linsz - 1.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Date: ',
sy-datum mm/dd/yyyy.
write: at sy-linsz '|'.
write:/1 '|'.
write: at col1 'ReportId: ',
sy-repid.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Page: ',
sy-pagno.
write: at sy-linsz '|'.
ENDFORM. " write_other_hdr_details
*& Form get_data_component
Get the data based on Component level
FORM get_data_component.
data wa_lines type i.
*-- Get the BOM item details
SELECT stlty stlnr stlkn stpoz idnrk meins menge
FROM stpo
INTO TABLE t_stpo
WHERE idnrk IN s_idnrk.
IF sy-subrc = 0.
CLEAR wa_lines.
DESCRIBE TABLE t_stpo LINES wa_lines.
IF wa_lines > 0.
SELECT stlty stlnr stlal stkoz bmein bmeng
FROM stko
INTO TABLE t_stko
FOR ALL ENTRIES IN t_stpo
WHERE stlnr = t_stpo-stlnr.
CLEAR wa_lines.
DELETE ADJACENT DUPLICATES FROM t_stko COMPARING ALL FIELDS.
DESCRIBE TABLE t_stko LINES wa_lines.
IF wa_lines > 0.
*-- Get the BOM item details
SELECT * FROM mast INTO TABLE t_mast FOR ALL ENTRIES IN t_stko
WHERE werks = p_werks AND
stlnr = t_stko-stlnr
and stlal in s_stlal.
ENDIF.
ENDIF.
else.
Write:/2 'List contains no data'.
stop.
endif.
loop at t_mast.
clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
if sy-tabix ne 1.
skip 1.
endif.
End of change Seshu
Get the material Description
select single maktx from makt into v_maktx
where matnr = t_mast-matnr
and spras = 'E'.
Get the material details from STKO Table
select single * from stko into wa_stko
where STLTY = 'M'
and STLNR = t_mast-stlnr
and STLAL = t_mast-stlal.
Main Header for Each Material
format color 5 on.
write:/2 'Material',20 'Material Description',65 'Alternative BOM',
90 'Base Qty', 115 'Base Unit'.
format color 5 off.
format color 1 on.
write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
115 wa_stko-BMEIN.
format color 1 off.
Use the Function Module and get the format level by level
perform get_level_level.
clear : t_mast.
endloop.
ENDFORM. " get_data_component
*& Form obj_ident
text
FORM obj_ident.
weder Mat noch Doc
CHECK: T_stb-objty NE otyp_mat,
T_stb-objty NE ootyp_mat,
T_stb-objty NE otyp_doc,
T_stb-objty NE otyp_ntm.
?T418-WA schon ok
nein
IF T_stb-postp NE t418-postp.
T418 einlesen
PERFORM t418_lesen USING T_stb-postp.
ENDIF.
PERFORM cl_clstab_maint.
?MatNr-Eingabe bei diesem PosTyp moeglich
und keine Textposition
trifft zu
IF t418-matin NE '-'
AND t418-txpos IS INITIAL.
aktuelles Objekt ist Material NLAG
T_stb-objty = '1'.
PosKurztext in ObjKurztext uebernehmen.
T_stb-ojtxp = T_stb-potx1.
MODIFY T_stb.
ELSE.
IF T_stb-objty IS INITIAL.
T_stb-objty = '2'.
MODIFY T_stb.
ENDIF.
ENDIF.
ENDFORM. " obj_ident
*& Form t418_lesen
text
-->P_T_STB_POSTP text
FORM t418_lesen USING lkl_postp LIKE stpo-postp.
T418-WA initialisieren
CLEAR:
t418.
Key angeben
t418-postp = lkl_postp.
PosTypDefinition lesen
READ TABLE t418.
ENDFORM. " t418_lesen
*& Form cl_clstab_maint
text
FORM cl_clstab_maint.
nur fuer Klassenpositionen
CHECK t_STB-OBJTY EQ OTYP_KLA.
Teilkey der Klassenpositionentabelle
CL_CLSTAB-CLASS = t_STB-CLASS.
CL_CLSTAB-KLART = t_STB-KLART.
Klassenpositionentabelle lesen
READ TABLE CL_CLSTAB
WITH KEY CL_CLSTAB(21)
BINARY SEARCH.
aktuelle Klassenposition bereits in Klassenpositionentabelle
nein
IF SY-SUBRC <> 0.
Klassenposition in Klassenpositionentabelle hinzufuegen
INSERT CL_CLSTAB INDEX SY-TABIX.
ENDIF.
ENDFORM. " cl_clstab_maint
*& Form alv_stb_prep
Printing the data as LEVEL BY LEVEL
FORM alv_stb_prep.
CLEAR:
alv_stb,
stb_orig,
stb_add.
IF t_stb-hdnfo IS INITIAL.
stb_orig = t_stb.
IF t_stb-mngko >= max_num.
stb_add-ovfls = ueberl_kz.
ELSE.
IF t_stb-mngko <= min_num.
stb_add-ovfls = ueberl_kz.
ELSE.
CLEAR: stb_add-ovfls.
ENDIF.
ENDIF.
IF NOT t_stb-xtlnr IS INITIAL.
stb_add-bomfl = b_flag.
ENDIF.
IF NOT t_stb-knobj IS INITIAL
OR NOT t_stb-class IS INITIAL
OR NOT t_stb-kzclb IS INITIAL.
stb_add-knofl = 'X'.
ENDIF.
ELSE.
CHECK t_stb-stufe > 1.
alv_stb-info = 'C30'.
IF t_stb-ttidx <> t_matcat-index.
READ TABLE t_matcat INDEX t_stb-ttidx.
ENDIF.
stb_orig-hdnfo = t_stb-hdnfo.
stb_orig-stufe = t_stb-stufe - 1 .
stb_orig-ojtxp = t_stb-ojtxb.
IF NOT t_stb-altst IS INITIAL.
stb_orig-stlal = t_stb-stlal.
IF stb_orig-stlal(1) EQ '0'.
stb_orig-stlal(1) = ' '.
ENDIF.
ENDIF.
stb_orig-idnrk = t_matcat-matnr.
ENDIF.
CLEAR:
stb_add-dobjt,
stb_add-objic.
CASE t_stb-objty.
WHEN otyp_mat.
WRITE: stb_orig-idnrk TO ecfld.
stb_add-objic = '@A6@'.
WHEN 'M'.
WRITE: stb_orig-idnrk TO ecfld.
stb_add-objic = '@A6@'.
WHEN otyp_noo.
WRITE: stb_orig-potx1 TO ecfld.
stb_add-objic = '@0Q@'.
WHEN otyp_doc.
write stb_orig-doknr to ecfld. "note 489354
IF ecfld CP '*# '. ENDIF. "note 489354
sy-fdpos = sy-fdpos + 1. "note 489354
CONCATENATE
*d stb_orig-doknr "note 489354
stb_orig-dokar
stb_orig-doktl
stb_orig-dokvr
*d INTO ecfld "note 489354
INTO ecfld+sy-fdpos "note 489354
SEPARATED BY space.
stb_add-objic = '@AR@'.
WHEN otyp_kla.
CONCATENATE
stb_orig-class
stb_orig-klart
INTO ecfld
SEPARATED BY space.
stb_add-objic = '@7C@'.
WHEN otyp_ntm.
WRITE: stb_orig-intrm TO ecfld.
WHEN OTHERS.
ENDCASE.
*d CONDENSE ecfld. "note 515408
stb_add-dobjt = ecfld(40).
CLEAR: ecfld.
WRITE stb_orig-stufe TO stb_add-dstuf NO-SIGN.
*d MOVE-CORRESPONDING stb_orig TO alv_stb. "note 331962
MOVE-CORRESPONDING stb_add TO alv_stb.
MOVE-CORRESPONDING stb_orig TO alv_stb. "note 331962
APPEND alv_stb.
ENDFORM. " alv_stb_prep
*& Form get_level_level
text
FORM get_level_level.
REFRESH : T_STB,
T_MATCAT,
ALV_STB.
CLEAR : T_STB,
T_MATCAT,
ALV_STB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = 'PP01'
datuv = sy-datum
mktls = 'X'
mehrs = 'X'
mtnrv = t_mast-matnr
stlal = '01'
stlan = '1'
stpst = 0
svwvo = 'X'
werks = p_werks
vrsvo = 'X'
TABLES
stb = t_stb
matcat = t_matcat
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR: hd_tab.
Entry der KlassenstatusTab. initialisieren
cl_clstab,
Entry 'Objekte von Klassen' initialisieren
cl_objmemo.
REFRESH: hd_tab.
SORT t_matcat BY index ASCENDING.
Get the All levels
loop at t_stb.
IF NOT t_stb-hdnfo IS INITIAL.
EXIT.
ENDIF.
Object Identification
PERFORM obj_ident.
READ TABLE hd_tab
WITH KEY stufe = t_stb-stufe
vwegx = t_stb-vwegx
BINARY SEARCH
TRANSPORTING NO FIELDS.
?gibt es diesen Satz schon
nein
IF sy-subrc <> 0.
dann in SFP-Infosatzverweistab. aufnehmen
*d APPEND HD_TAB. "HGH054648
hd_tab-stufe = t_stb-stufe.
"HGH054648
hd_tab-vwegx = t_stb-vwegx.
"HGH054648
INSERT hd_tab "HGH054648
INTO hd_tab "HGH054648
INDEX sy-tabix. "HGH054648
PosNr initialisieren
CLEAR: t_stb-posnr.
SFP-InfosatzKz setzen
t_stb-hdnfo = 'X'.
stb-objty = otyp_mat.
"HGE246532
als SFP-Infosatz in die STB aufnehmen
append t_stb.
ENDIF.
*del ENDIF.
clear t_stb.
endloop.
SORT t_stb ASCENDING BY stufe
index ASCENDING
*del POSNR ASCENDING. "HGC062735
posnr ASCENDING "HGC062735
hdnfo DESCENDING.
LOOP AT t_stb.
T_stb-index = sy-tabix.
MODIFY T_stb.
PERFORM alv_stb_prep.
ENDLOOP.
Displays the Value as Level by Level
loop at ALV_stb.
if sy-tabix = 1.
format color 3 on.
write:/2 'Level',12 'Item',22 'Component',
42 'Material Description',82 'Base Qty',
107 'Base Unit',120 'Assembly Indicator'.
format color 3 on.
endif.
if alv_stb-MEINs is initial.
v_flag = 'X'.
endif.
if v_flag = 'X'.
format color 5 on.
write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP.
format color 1 off.
else.
if alv_stb-STUFE = '1'.
format color 1 on.
write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs, 120 alv_stb-bomfl .
format color 1 off.
elseif alv_stb-STUFE = '2'.
format color 2 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl.
format color 2 off.
elseif alv_stb-STUFE = '3'.
format color 3 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 3 off.
elseif alv_stb-STUFE = '4'.
format color 4 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 4 off.
elseif alv_stb-STUFE = '5'.
format color 5 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 5 off.
elseif alv_stb-STUFE = '6'.
format color 7 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl.
format color 6 off.
elseif alv_stb-STUFE = '7'.
format color 7 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 7 off.
else.
format color 1 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 1 off.
endif.
endif.
hide: alv_stb.
clear : alv_stb.
clear v_flag.
endloop.
ENDFORM. " get_level_level
*& Form f4_for_variant
text
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = g_variant
i_save = g_save
i_tabname_header = g_tabname_header
i_tabname_item = g_tabname_item
it_default_fieldcat =
IMPORTING
e_exit = g_exit
es_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF g_exit = space.
p_vari = gx_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f4_for_variant
FORM E03_EVENTTAB_BUILD *
--> E03_LT_EVENTS *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE gc_formname_top_of_page TO ls_event-form.
APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
FORM E04_COMMENT_BUILD *
--> E04_LT_TOP_OF_PAGE *
FORM e04_comment_build USING e04_lt_top_of_page TYPE slis_t_listheader.
DATA: ls_line TYPE slis_listheader.
Listenüberschrift: Typ H
CLEAR ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-001.
APPEND ls_line TO e04_lt_top_of_page.
Kopfinfo: Typ S
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-key = text-050.
ls_line-info = text-010.
APPEND ls_line TO e04_lt_top_of_page.
ls_line-key = text-051.
APPEND ls_line TO e04_lt_top_of_page.
Aktionsinfo: Typ A
CLEAR ls_line.
ls_line-typ = 'A'.
LS_LINE-KEY: not used for this type
ls_line-info = text-002.
APPEND ls_line TO e04_lt_top_of_page.
ENDFORM.
FORM E07_SP_GROUP_BUILD *
--> E07_LT_SP_GROUP *
FORM e07_sp_group_build USING e07_lt_sp_group TYPE slis_t_sp_group_alv.
DATA: ls_sp_group TYPE slis_sp_group_alv.
CLEAR ls_sp_group.
ls_sp_group-sp_group = 'A'.
ls_sp_group-text = text-005.
APPEND ls_sp_group TO e07_lt_sp_group.
ENDF -
How to find out where used list of Table or T-code
Dear ABAP gurus
I know many of you have done this several times.
wish to find out which Transaction code INSERTs the data into the table IHPA.
I did the where used list - SE11 ( for specific key work called INSERT ).
Used the Table called D010TAB which has some information.
Vise versa if I know a T-CODE , how to know which tables it read & Modify...
any better procedure than spending hours in research...
I found similar custom program to find USER EXITS ...here..., looking soething similar...
[http://wiki.sdn.sap.com/wiki/display/Snippets/FindUser-exits%2CBADIs%2CBTEs%2CEtcbyTCodeorProgram]
thank you for your help
Edited by: Raj Anvesh on Aug 3, 2011 9:58 PMHi Anvesh,
Maybe the data INSERTION is happening by BAPI,
So just try to look for the concerned BAPIS.
ECP_SRV_PARTNERS_IHPA
IREP1_IHPA_ADRNR_PRE_FETCH
IREP1_IHPA_ADRNR_READ
MAP2E_DIIHPA_TO_PARTNER
MAP2E_IHPAVB_BAPI2080_NOTPARTE
MAP2E_IHPAVB_TO_BAPI_IHPA
MAP2E_IHPA_BAPI2080_NOTPARTNRI
MAP2E_IHPA_M_BAPI2080_NOTPNRI
MAP2I_BAPI2080_NOTPARTNRI_IHPA
MAP2I_BAPI_IHPA_TO_IHPA
PM_DB_FILL_DIIHPA
PM_PARTNERCOPY_FILL_XIHPA
PM_PARTNER_DELETE_XIHPA
PM_PARTNER_GET_XIHPA
PM_PARTNER_PUT_XIHPA
PM_PARTNER_REFRESH_XIHPA
these are the bapis which are dealing with the IHPA table,
Segregate them as needed and then go to the std program
Revert for further clarification.
Thanks
Sri -
Use CS4.
Switched computer with Win OS to iMac computer with OS X.
Downloaded CS4 on iMac.
But old product key entered is not recognised.
How to solve problem?There is nothing to resolve. Serial numbers are platform specific, but platform swaps only apply to current versions, meaning CS&. Your CS4 is not eligible for an upgrade, so your only option is to buy a new CS6 license or sign up for Creative Cloud.
Mylenium -
Bizarre situation with the "Where used list" for a table updated by FB50
Hello all,
I use the "where used list" (all check boxes selected) function in SE11 to find out where and how the table FMGLFLEXT (General Ledger Public Sector: Total) is being used and updated. All I get is a reference to a function module, namely G_POSTING_FMGLFLEXT. When I do a "where used list" (once again, all check boxes selected) for the FM, I get the message: Function Module G_POSTING_FMGLFLEXT not found in selected search area Message no. ES120 despite the fact that all check boxes are selected.
Yet this table contains data which were put in there via transaction FB50 (G/L Acct Pstg: Single Screen Trans.). So somehow, somewhere this data was created and put into the table.
I dont get it! What am I missing?
Thank you for your helpThere could be several reasons for this, including:
- The cross reference tables (used by the "where used" functionality) have not been updated in the system you are logged into - check with your Basis team on this as the programs that do this (a) run for hours and (b) take up a fair chunk of database space.
- The data may be stored via dynamic SQL (e.g. "insert into (g_tab_name)") so the table reference doesn't show up
- The function module may be called dynamically so the FM where used doesn't reflect this
You could try, instead, using the ST05 SQL Trace to track what code is updating the table when you run FB50.
Jonathan -
How to see an IDOC type & FM, "WHERE USED LIST"?
Hi Experts,
I nned to create an IDOC of WMTCID01 and message type is WMTOCO.
I wanna to see that, Where Where this IDOC was used(especially, in "Z" objects) so that, I can get some idea abt. it and do my coding.
So, let me know that, How to see this IDOC & FM, "WHERE USED LIST"
thanqhi go to the tcode...
1) Create Segment ( WE31)
2) Create Idoc Type ( WE30)
3) Create Message Type ( WE81)
4) Assign Idoc Type to Message Type ( WE82)
Tcode- we19 is for testing idoc
in the we42 the message type and the idoc function module is ataached by the process code..
this is a best example to understand the creation of idocs(z)..
http://www.****************/Tutorials/ALE/CustomIDOC/Create.htm -
last time i bought apps by using visa gift card so iam trying to use the kind of visa gift card and the system is denying the method payment ....any idea how to solve this with my itune account ?
A few reasons I can think of, but instead of shooting in the dark, lets check with experts who can look at your account.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
Traceability with batch class characteristics in batch where used list.
Hi,
I have a process order which issues 5 pallets or material and produces 5 pallets of another material. Each pallet is a seperate batch in my scenario.
All materials are assigned to a batch class and i will be using a class characteristic to enter the issued pallet number (includes material number and batch number) to the produced pallet batch. This way i want to create a traceability system.
the problem is i need a way to create a hierarchical view or integrate this scenario to batch where used list.
there is a badi for where used list to read external data. but i guess that is for something called "external batches"
can you please guide me for the best practice of doing this?
Thanks,
Alper,Hi!,
I think you have to use the mix of two functionalities:
1. Original batch function
2. Batch derivation
This way you can pull the characteristics of the source material batch in to raw material as well as finish material batches.
In this you have to create a nonvaluated material which is used as original batch mateial. You have to assign this material in material master of the RM and FG alongwith other required entries. Also you have to use batch derivation function to pull the charactristics of this original material batch in to the RM and FG.
Please go through the SAP help regarding Original batch and Batch derivation function to have more clarity.
Please revert back in case of any further issue.
Regards,
Uday -
Where Used List with multiple/range of material
Hi there Gurus!
We have requirement to have multiple material on CS15(Where-used List Single-Level Material).
IW13 won't work since there are spares/eqpmnt that has no PM Order yet.
We are looking at developing SAP Query for this using but I am reluctant if this will work since it's from bottom going up.
Has anyone tried this? Any tip/watchout?
Your very valuable input is highly regarded and will be rewarded.
Thanks a lot in advance!Hello Thyagarajan,
Thanks for clarifying the requirement.
Can only input one material in selection screen of CS15 and what we want is functionality to enable multiple material entry. Thanks!
Hi Pete,
Thanks for your input.
When you copy CS15 and modify to enable multiple material entry, what other options did you consider before deciding on copying CS15? Does your other options include SAP Query? Do you think it will meet our reqmnt? Thanks!
Maybe you are looking for
-
i have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows
-
HttpException Server name cannot be resolved
Within an application we need to connect via HTTPS using the server URL rather than the IP address as the certificate references the domain. We always get the following error 'org.w3c.www.protocol.http.HttpException: The host name [gecwinfinite.com]
-
Router - CPU maxing at specific times of the day every day
Hello experts I'm just writing to get some help with a cpu max-out issue that happens on almost all the routers in the network at a particular time in the day - everyday. I understand EEM traps or tcl script might be useful but since i am not good at
-
SUNWsprox package with solaris 10 for Oracle 10g Installation....
Hi I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this p
-
No response from Graphical Screen painter-Exiting
Hi All, I am having a hard time getting the GUI of the screen painter. It displays the above message and also says * EU_SCRP_WN32 : timeout during allocate /CPIC_CALL : "ThSAPCMRCV'* Any idea how to troubleshoot? Regards, Sagar.