How to solve screen resolution in bdc
hi experts,
please tell me how to solve screen resolution in bdc.
regards.
subhasis
Hi,
<b>Pls check other posts in SDN before posting ur thread..there is same thread related to this on this forum on same day.</b>
Screen resolution means different in the screen display depending on ur system screen resolution.
suppose ur system resolution is diff and another's system is different then like in Tcode VA01, there will be 3 lineitems and another there will be 5 lineitems ,
so while doing recording and page down that will bw diff so there will be some problem
So u have to set the screen resolution as default by using CTU parameters..
write this code then
f_option-updmode = 'S'.
f_option-defsize = 'X'.* f
_option-dismode = 'N'.
*call transaction 'VA01' using bdcdata options from f_option messages into bdcerror.
Hope it helps.
Regards,
Sonika
Similar Messages
-
How to handle screen resolution in bdc session method.
hi all,
how to handle screen resolution in bdc session method.Hello,
Why do need that for? Is it to add rows on a table control??
If it does, add new rows by using the add button instead of adding into the table control directly to each row.
Bye
Gabriel. -
How to create screen resolution in bdc table control
hi gurus
can anyone suggest me
how to create screen resolution in bdc table control
thanks®ards
mark.Hi ,
Using CTU_PARAMS table for screen resolution .
For this sample code.
This is for Transation FB60.
report ZZFB60
no standard page heading line-size 255.
tables t100.
PARAMETERS : p_file1 like rlgrap-filename,
p_doctyp like RF05A-BUSCS,
p_invdat like INVFO-BLDAT,
p_posdat like INVFO-BUDAT.
CONSTANTS : C_TRANS_FB60(4) VALUE 'FB60'.
*Parameter string for runtime of CALL TRANSACTION
data : l_option type ctu_params,
l_subrc type sysubrc.
DATA : l_mstring(150).
data accnt type char17.
data : day type char2,
month type char2,
year type char4,
date1 type char10,
date2 type char10.
data : cnt(2) TYPE n,
cnt1 type i,
fld(25) TYPE c.
data : begin of excel occurs 0,
fieldname(255) type c,
end of excel.
DATA:BEGIN OF it_mess OCCURS 0,
msgtyp(5),
lms(200),
msgv1(50),
END OF it_mess.
data: begin of t_record occurs 0,
BUKRS(004),
ACCNT(017),
XBLNR(016),
WRBTR1(016),
WAERS(005),
SECCO(004) ,
SGTXT(050),
HKONT(010),
WRBTR2(017),
MWSKZ(002),
GSBER(004),
KOSTL(010),
end of t_record.
*Internal Table for Header Data
DATA : BEGIN OF t_head OCCURS 0,
BUKRS(004), "Company Code
ACCNT(017), "Account or Vendor
XBLNR(016), "Reference
WRBTR1(017), "Amount in document currency
WAERS(005), "Currency
SECCO(004), "Section Code
SGTXT(050), "Text
END OF t_head.
*Internal table for Item Data
DATA : BEGIN OF t_item OCCURS 0,
ACCNT(017), "Account
HKONT(010), "GL Account
WRBTR2(017), "Line item Amount in document currency
MWSKZ(002), "Tax Code
GSBER(004), " Business Area
KOSTL(010), "Cost centre
END OF t_item.
DATA: IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDC_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*include bdcrecx1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
start-of-selection.
l_option-defsize = 'X'.
l_option-dismode = 'A'.
l_option-updmode = 'S'.
day = p_invdat+6(2).
month = p_invdat+4(2).
year = p_invdat+0(4).
concatenate day month year into date1 SEPARATED BY '.'.
day = p_posdat+6(2).
month = p_posdat+4(2).
year = p_posdat+0(4).
concatenate day month year into date2 SEPARATED BY '.'.
*perform open_group.
loop at t_head.
CLEAR IT_BDCDATA.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPLACHD' '1000'.
perform bdc_field using 'BDC_OKCODE' '=ENTR'.
perform bdc_field using 'BKPF-BUKRS' t_head-bukrs.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_field using 'RF05A-BUSCS' p_doctyp.
perform bdc_field using 'INVFO-ACCNT' t_head-accnt.
perform bdc_field using 'INVFO-BLDAT' date1.
perform bdc_field using 'INVFO-BUDAT' date2.
perform bdc_field using 'INVFO-XBLNR' t_head-xblnr.
perform bdc_field using 'INVFO-WRBTR' t_head-wrbtr1.
perform bdc_field using 'INVFO-WAERS' t_head-waers.
perform bdc_field using 'INVFO-SECCO' t_head-secco.
perform bdc_field using 'INVFO-SGTXT' t_head-sgtxt.
cnt = 1.
cnt1 = 1.
loop at t_item where accnt = t_head-accnt.
*if cnt > 4.
*cnt = 4.
*endif.
if cnt1 gt 1.
CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
perform bdc_field using fld 'X'.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=0005'.
endif.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
CONCATENATE 'ACGL_ITEM-HKONT(' cnt ')' INTO fld.
perform bdc_field using fld t_item-hkont.
CONCATENATE 'ACGL_ITEM-WRBTR(' cnt ')' INTO fld.
perform bdc_field using fld t_item-wrbtr2.
CONCATENATE 'ACGL_ITEM-MWSKZ(' cnt ')' INTO fld.
perform bdc_field using fld t_item-mwskz.
CONCATENATE 'ACGL_ITEM-GSBER(' cnt ')' INTO fld.
perform bdc_field using fld t_item-gsber.
CONCATENATE 'ACGL_ITEM-KOSTL(' cnt ')' INTO fld.
perform bdc_field using fld t_item-kostl.
perform bdc_field using 'BDC_CURSOR' fld.
*CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
*perform bdc_field using fld 'X'.
cnt1 = cnt1 + 1.
*cnt = cnt + 1.
*if cnt > 1.
*perform bdc_dynpro using 'SAPMF05A' '1100'.
*perform bdc_field using 'BDC_OKCODE' '=0005'.
**perform bdc_field using 'BDC_OKCODE' '=0006'.
*endif.
endloop.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE'
'=BS'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
*perform bdc_transaction using 'FB60'.
CALL TRANSACTION C_TRANS_FB60 USING IT_BDCDATA options from l_option
MESSAGES INTO IT_BDC_MESSAGES.
perform error.
perform errordownload.
endloop.
*perform close_group.
*Form data_upload
FORM data_upload .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = p_file1
FILETYPE = 'DAT'
TABLES
DATA_TAB = t_record.
ENDFORM. " data_upload
*Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'p_file1'
IMPORTING
file_name = p_file1.
ENDFORM. " file_selection
Form BDC_DYNPRO
FORM BDC_DYNPRO using program dynpro.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
endform.
*Form BDC_FIELD
FORM bdc_field using fnam fval.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Table Control
FORM table_control .
LOOP AT t_record.
ON CHANGE OF t_record-accnt.
MOVE-CORRESPONDING t_record TO t_head.
APPEND t_head.
ENDON.
loop at t_head.
t_item-accnt = t_head-accnt.
t_item-hkont = t_record-hkont.
t_item-wrbtr2 = t_record-wrbtr2 .
t_item-mwskz = t_record-mwskz .
t_item-gsber = t_record-gsber .
t_item-kostl = t_record-kostl.
APPEND t_item.
endloop.
If t_record-level = 'H'.
t_head-bukrs = t_record-text1.
t_head-accnt = t_record-text2.
t_head-xblnr = t_record-text3.
t_head-wrbtr1 = t_record-text4.
t_head-waers = t_record-text5.
t_head-secco = t_record-text6.
t_head-sgtxt = t_record-text7.
APPEND t_head.
else.
t_item-accnt = t_head-accnt.
t_item-hkont = t_record-text1.
t_item-wrbtr2 = t_record-text2.
t_item-mwskz = t_record-text3.
t_item-gsber = t_record-text4.
t_item-kostl = t_record-text5.
APPEND t_item.
endif.
ENDLOOP.
ENDFORM.
FORM error .
LOOP AT IT_BDC_MESSAGES.
IF IT_BDC_MESSAGES-msgtyp = 'E'.
SELECT single * FROM t100 WHERE
sprsl = it_BDC_MESSAGES-msgspra
AND arbgb = IT_BDC_MESSAGES-msgid
AND msgnr = IT_BDC_MESSAGES-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
REPLACE '&2' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
REPLACE '&3' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
REPLACE '&4' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
APPEND it_mess.
ELSE.
it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
APPEND it_mess.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
form errordownload.
*down the internal table to excel file.
call function 'EXCEL_OLE_STANDARD_DAT'
EXPORTING
file_name = 'c:/Error.xls'
TABLES
data_tab = it_mess
fieldnames = excel
EXCEPTIONS
file_not_exist = 1
filename_expected = 2
communication_error = 3
ole_object_method_error = 4
ole_object_property_error = 5
invalid_filename = 6
invalid_pivot_fields = 7
download_problem = 8
others = 9.
endform.
Reward if useful
Regards,
Narasimha
Edited by: narasimha marella on May 13, 2008 12:12 PM -
How to set screen resolution in BDC
hi pls give info regarding how to set resolution for screen
thank you
Ravihi,
For screen resolution use ctu_params, with default size
Data : f_option type ctu_params,
f_option-updmode = 'S'.
f_option-defsize = 'X'.
f_option-dismode = 'N'.
call transaction 'VA01' using bdcdata options from f_option messages into bdcerror.
CALL TRANSACTION tcode... OPTIONS FROM opt
... OPTIONS FROM opt
Effect
Allows you to control processing using the values of the componetns of the structure opt, which must have the ABAP Dictionary type CTU_PARAMS. The components have the following meanings:
DISMODE
Display mode (like the MODE addition)
UPDMODE
Update mode (like the UPDATE addition)
CATTMODE
CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
DEFSIZE
Use default window size
RACOMMIT
Do not end transaction at COMMIT WORK
NOBINPT
No batch input mode (that is, SY-BINPT = SPACE)
NOBIEND
No batch input mode after the end of BDC data.
The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
' ' No
If you do not use the OPTIONS FROM addition, the following control parameter settings apply:
DISMODE
From addition MODE
UPDMODE
From addition UPDATE
CATTMODE
No CATT active
DEFSIZE
Do not use default window size
RACOMMIT
Successful end on COMMIT WORK
NOBINPT
Batch input mode active ( SY-BINPT = X
NOBIEND
Batch input mode remains active after the BDC data -
How to make screen resolution independent in BDC
How to make screen resolution independent in BDC
hi
good
You need to use the CTU_PARAM structure alon with the call transaction statment.
**Sturcture of CTU_PARAM
**DISMODE : Display mode (like the MODE addition 'A' , 'E', 'N')
**UPDMODE: Update mode (like the UPDATE addition 'S', 'A')
**DEFSIZE : Use default window size (Here we are handling those transaction by giving default window size)
**RACOMMIT: Do not end transaction at COMMIT WORK
**NOBINPT : No batch input mode (that is, SY-BINPT = SPACE)
**NOBIEND : No batch input mode after the end of BDC data.
*The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
DATA : L_OPTION TYPE CTU_PARAMS, "Parameter string for runtime of CALL TRANSACTION
L_SUBRC TYPE SYSUBRC.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01' "FK01-Vendor master creation
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
thanks
mrutyun^ -
How to do screen resolution in session method
hi guru how to do screen resolution in session method.
please tell me.
regards
subhasisSometime back this is refered in SDN :
Check table <i>CTU_PARAMS</i> and field <i>DEFSIZE</i> for setting fixed line of table control.
CALL TRANSACTION 'VA01' USING it_bdcdata
OPTIONS FROM OPT
MESSAGES INTO it_mesg.
opt of type ctu_params.
WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
WA_CTU_PARAMS-UPDMODE = 'S'. "synchronus update
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
Default size will play good role in terms of resoultion. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resoultion. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
Thanks!! -
How to change screen resolution on touchpad
how to change screen resolution on touchpad ?i was working on my tp and out of the blues my screen looks like it is at 800*600
or is this the screen itself that went bad?
can someboby please tell me the procedure to use the 12 mt warranty..
tia
Post relates to: HP TouchPad (WiFi)Sorry to say reloading WebOS did not help this issue on my TP. contacted Support and was told to send it.Even sorrier to say that my TP is now lost. My tracking number reports it as delievered on Dec 5, but HP has no record of it.When I got back on Chat they are now also telling me that my TP serial number is a EU model, even though my box clearly states HP Touchpad ,US, 1.20,32gb,Wifi.
Not sure what that even has to do with it being lost now..if it is as they say and no warranty on it in US I just want it sent back.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
HI,
CAN ANY ONE TELL ABOUT SCREEN RESOLUTION IN BDC.
REGARDS.
B.SREENIVASULU.Hi,
Screen resolution means different in the screen display depending on ur system screen resolution.
suppose ur system resolution is diff and another's system is different then like in Tcode VA01, there will be 3 lineitems and another there will be 5 lineitems ,
so while doing recording and page down that will bw diff so there will be some problem
So u have to set the screen resolution as default by using CTU parameters..
write this code then
f_option-updmode = 'S'.
<b> f_option-defsize = 'X'.</b> f
_option-dismode = 'N'.
*call transaction 'VA01' using bdcdata options from f_option messages into bdcerror.
Hope it helps.
Regards,
Sonika -
How to handle screen resolution in session method
how to handle screen resolution in session method without bdc_insert .
Hello,
Why do need that for? Is it to add rows on a table control??
If it does, add new rows by using the add button instead of adding into the table control directly to each row.
Bye
Gabriel. -
Controlling Screen Resolution in BDCs
Hi,
Can any one explain about the process for Controlling Screen Resolution in BDCs.
Thanks & Regards,
Rajesh.Hi,
If u write table control bdc program in 14'' monitor screen, then if the same program u run at different monitor size, then the screen resolution problem comes in to the picture,
like, u get 5 records in table control in one screen, and some other records in other screen, to avoid this screen resolution problem we use CTU-PARAMS Structure.
In ur program u have to set
defsize type ctu_params-defsize value 'X',
Then u will be free of screen resolution problem.
Fill the str CTU_PARAMS-defsize = 'X' and pass in CTU stmnt as
call transaction 'XXX' options using t_bdcdata ctu_params.
Analysing :
1. If nothing works, then we have to
some ifs & buts.
2. There shall be normally
2-4 different kinds of resolution
on various users comptuers.
3. Based on this,
we have to know beforehand,
what will be the number of rows
in the table control.
4. The user can be given
a selection/paraemter
for resolution
eg. 800x600
1024x100
axb
etc.
5. Based on this, we will hardcode
in the program (based upon our knowledge/recording
which we have seen and done)
we will hardcode
the number of lines
in the VARIBLE.
6. Then we can simply use this variable
for our LOOP and logic purpose.
7. It will be the responsibiltiy of the
use to CHOOSE THE CORRECT resolution,
on the selection-screen.
For screen resolution use ctu_params, with default size
Data : f_option type ctu_params,
f_option-updmode = 'S'.
f_option-defsize = 'X'.
f_option-dismode = 'N'.
call transaction 'VA01' using bdcdata options from f_option messages into bdcerror.
CALL TRANSACTION tcode... OPTIONS FROM opt
... OPTIONS FROM opt
Effect
Allows you to control processing using the values of the componetns of the structure opt, which must have the ABAP Dictionary type CTU_PARAMS. The components have the following meanings:
DISMODE
Display mode (like the MODE addition)
UPDMODE
Update mode (like the UPDATE addition)
CATTMODE
CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
DEFSIZE
Use default window size
RACOMMIT
Do not end transaction at COMMIT WORK
NOBINPT
No batch input mode (that is, SY-BINPT = SPACE)
NOBIEND
No batch input mode after the end of BDC data.
The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
' ' No
If you do not use the OPTIONS FROM addition, the following control parameter settings apply:
DISMODE
From addition MODE
UPDMODE
From addition UPDATE
CATTMODE
No CATT active
DEFSIZE
Do not use default window size
RACOMMIT
Successful end on COMMIT WORK
NOBINPT
Batch input mode active ( SY-BINPT = X
NOBIEND
Batch input mode remains active after the BDC data
Hope it makes u understand...
Reagrds, -
How to handle screen resolution in ME21 fro a bdc programme
I need to use BDC program for ME21 for that how to handle the screen resolution,
i know CTU_PARAMS structure is there ,but how to use them, please send the model code.
Thanks & Regards
krishnagot the solution
-
[SOLVED] How to reset screen resolution?
Hello,
I am new to Linux and have been installing Arch Linux closely following the beginner's guide. However, when I got to Step 3: Update system, I turned the system off for the evening and when I restarted this morning, my screen resolution has changed and I cannot see the first few characters of the command line and the bottom line is not visible at all. At that point I have to switch to another console (Alt F2) so I can see what I'm typing. I changed the vga=773 to 769 and 771 in /boot/grub/menu.lst, but it doesn't fix the problem.
How can I get the screen resolution lowered so I can see my command line? This is my HTPC, so I don't want to mess with the screen positioning and get that out of whack for the other functions it provides.
Thanks,
Ted
Last edited by VirtualHogger (2010-08-13 00:46:53)Thanks both for the replies.
I should have mentioned that I am connected to my Samsung 42" TV via HDMI/DVI, not VGA. Neither of my video cards have a VGA connector, only DVI. So I don't have an Auto function for that mode, and looking through the menus, I cannot find a screen position function, only mode a selection (16:9, 4:3, etc) which do not help. Even setting it at 4:3 leaves the image clipped so that I cannot see the extremities of the screen that is being produced. When I first boot up, it is in a low resolution that is 100% viewable, but after all the daemons get loaded up and before I am prompted for a login, the resolution changes to a higher setting and I loose the edges. Shouldn't there be a way to force it to a lower resolution, like when it first starts up?
This is making it extremely difficult to enter the commands I need to set up Arch on this PC. -
Screen Resolution issue - BDC Grid
Hi All,
I am facing an issue with BDC for PRMM transaction.
If we look at the PRMM transaction, the very first screen consist of GRid forAction type.
The records in the grid of PRMM transaction is changing as per the screen resolution of User desktop.
Example: In my screen, I am able to see 16 rows in Grid and in user desktop i can see 10 or 20 rows. Because of this the Pagedown option and BDC is not behaving properly.
Please suggest what should be done to resolve it.
Thanks,
ShilpaHi Shilpa,
during recording from SHDB, use check box for Default Size.
in call transaction syntax: use
data: wa_opt type ctu_params.
wa_opt-dismode = w_mode. [N OR A OR E]
wa_opt-defsize = c_check.[X]
wa_opt-updmode = 'A'.
CALL TRANSACTION c_me41 USING i_bdcdata
OPTIONS FROM wa_opt [INSTEAD OF HARD CODING MODE]
MESSAGES INTO i_msgcoll.
Hope this can solve your problems.
Regards,
Tutun -
How to solve this error in bdc
Hi,
i have downladed the format ...........its downloading correctly.......
but i am getting this error.........how to solve that........
what may be the reason for that error.
EXCEL FILE FILE:// CANNOT BE PROCESSEDi am using 2 file paths one is upload file and is download file.
when i am using upload filr in bdc its working fine..
when i am using both upload file and to download fileformat then also its working fine.
but when i use only download format, file is downloading correctly
but i am getting error
file cannot be processed -
How to get screen resolution settings
How do u get the present screen resolution from code?
thanksThe AWT Toolkit class has got a method called getScreenSize(), it returns an instance of Dimension.
I'm not sure what to do when you have multiple screens though; maybe the methods of the classes GraphicsEnvironment and GraphicsDevice can be used.
Maybe you are looking for
-
help, iphoto on my desktop won't open. any ideas?
-
Viewing PDF files on the Zire 31
I am using Adobe Reader for Palm OS Mac. When I view a PDF file in detail on the Palm, it automatically converts it to grayscale to save space. However, it is a color map and it is nearly impossible to read in grayscale on the Palm. Is there a way to
-
Oracle application server issue
Hi, right now i m using oracle application server 10g on Hp-unix 11.11 (v1) , suddenly when the number of connection are increasing , memory usage reach to the 100% and my users got disconnected , previously it was the issue of number of connection a
-
How do I transfer all my info onto new hard drive (recalled replacement)
I had to have my hard drive replaced on my imac as a result of the recall. I use Time Machine and have no idea how to restore my info . Help?
-
ReReplace Best Practices Question
On my page I have a form with a text area. I want to replace any ampersands and quotes with the proper code. My question is, is it better to run the rereplace as I take the formdata and store it in my database or do I handle that in the query when CF