How to solve the error HTTP/S connection was not obtained successfully?

Hi,
I got a problem when i am trying to connect SAP ECC 6.0 system from SAP NETWEAVER EP 7.1 as below
ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (vrleccdv.vrpl.com:8000)
6. The host name vrleccdv.vrpl.com was resolved successfully.
7. An HTTP/S connection to http://vrleccdv.vrpl.com:8000/sap/bc/gui/sap/its/webgui/ was not obtained successfully; this might be due to a closed port on the Firewall.
can anyone suggest me how to solve this porblem

Hi Ramana,
In the Backend system pls check whether the service WEBGUI is activated or not.
This will help solve the problem.
Cheers-
Pramod

Similar Messages

How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

I hate "J term"
OK I love the learning the students get. And, I like helping them out! But, as a former man who's got the varicose viens to prove he's spent time "behind the podium" (yeah, "behind the podium" puts 'em to sleep- songs and dances for the young'uns) come on! USE the tools you teach!
Instructors invited to engage in the forums
Jeff

How to solve the error no sid found?

how to solve the error no sid found?

Hi,
The system will give you the error like this.. No SID found for value '0000030016 ' of characteristic "CUSTOMER"
Go to Customer infosource give the selection "'0000030016" and load the master data. And then update the transaction data from PSa if not reload it.
Assign points if helps
Regards
srini

How to solve the error sid missing?

how to solve the error sid missing?

Hi,
Loading data sometimes you get SID error inconsistencies on master data, do a combined test by using TCODE RSRV on the infoobject, fix then problem and reload data.
Hope it useful.
Thanks,
Somesh.

TS3694 How to solve the error 1015?

How to solve the error 1015?

Use google. You have a hacked or jailbroken phone, you can't get any help here, it's the against the forum term of use.

My Ipad is not charging suddenly ? How to solve the problem? As well its not charging into the computer also.

My Ipad is not charging suddenly ? How to solve the problem? As well its not charging into the computer also

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

How to solve the Error in Action for illustrator cs3

Through action in illustrator cs3 i changed the document mode RGB to CMYK via Visual Basic. But sometimes it throws 2 different kinds of error messages.
CODE:
appRef.DoScript "Change", "Convert"
While (appRef.ActionIsRunning)
WScript.sleep 1000
Wend
Error 1:
Could not complete the Play Command because the action is playing.
Error 2:
The Object "Document Color Mode: CMYK Color" is not currently available.
Could you please explain how to solve this error.

The input data provided as the first argument to ore.tableApply and rqTableEval are physically being moved from Oracle Database to the database server R engine, and then serially operating on the entire table The benefit to using ore.tableApply/rqTableEval in this case is the potentially greater amount of RAM on the database server. But it's important to note that R’s memory limitations still apply in this case.
You may have already seen the blog post on Managing Memory Limits and Configuring Exadata for Embedded R Execution where we discuss setting memory limits for the database server R engine. These suggestions can be used to load reasonably sized data tables, and you may still encounter limitations when using a very large table.
In contrast to the "table apply" functions, the "group Eval" and "row eval (" functions are parallel-enabled embedded R execution functions. They support data-parallel execution, where one or more R engines perform the same R function, or task, on different partitions of data. The following training and blog links should be helpful in choosing the correct function for your use case:
http://www.oracle.com/technetwork/database/database-technologies/r/r-enterprise/learnmore/ore-1-4-embedded-r-execution-s…
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle1
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle2
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle3
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle4
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle5
Sherry

How to solve the error 0xBFF6902B in Ni-Max??

Hello,
I am trying to communicate with Axis camera with Ni-vision , but I am getting the error as I mentioned.
Here in attachment I have attached the screenshot of error.
Would you please guide me how to solve this error.
Thank you very much.
Attachments:
error.png ‏982 KB

Hello,
I have a camera in My robot its Axis camera and its working fine in when I connect my robot and handle with labview.
But I am not able to detect that camera in Ni-Max as I want to develop some functionality of robot camera in Ni-IMQ.
When I tried to connect then I Got the error Error - 1074360277 occurred at IMAQdx Open Camera.vi,
would you please help me how to solve this problem.
Ip address of camera also responding well.
Please guide me what should be the possible way to solve this problem I am using labview 2012.
Attachments:
erro.png ‏231 KB

How to solve this error :12170 TNS connection to timeout occured- req

Hi
I have 2 databases.They are source db and target db .i have created the database link source to target.The users report that when they try to connect the database source from target database using the database link they are getting the error
ORA-12170: TNS: CONNECTION TO TIMEOUT OCCURED
Note : Indpendently can be log on source database, target database from out of source db, But source db could'nt directly logon.
so how can i solve the error
pls reply urgently....
regs
RENGA

ORA-12170: TNS: CONNECTION TO TIMEOUT OCCUREDWhen was last time this worked?
What changed?
What OS name & version involved on each system?
12170, 00000, "TNS:Connect timeout occurred"
// *Cause: The server shut down because connection establishment or
// communication with a client failed to complete within the allotted time
// interval. This may be a result of network or system delays; or this may
// indicate that a malicious client is trying to cause a Denial of Service
// attack on the server.
// *Action: If the error occurred because of a slow network or system,
// reconfigure one or all of the parameters SQLNET.INBOUND_CONNECT_TIMEOUT,
// SQLNET.SEND_TIMEOUT, SQLNET.RECV_TIMEOUT in sqlnet.ora to larger values.
// If a malicious client is suspected, use the address in sqlnet.log to
// identify the source and restrict access. Note that logged addresses may
// not be reliable as they can be forged (e.g. in TCP/IP).Edited by: sb92075 on Oct 20, 2010 6:53 AM

How to solve the error 'please enter account assignment ' in BAPI_PO_CREATE.

Hi gurus,
While creating shopping cart with an item from services type i am getting error please enter account assignment.Please suggest me how to solve this error
thanks&regards,
Suneel Kumar.

Hi Suneel,
Are you getting while transferring the Shopping cart into ECC? Or you are getting while creating Shopping cart in SRM?
Thank you
Ritesh

How To solve the error FJS 0012 during installation IDES4.7

Hi,
I got an error FJS00012 during installation of IDES4.7. How to solve the problem? is there any way to solve the problem..... please suggest me.... and send a mail to [email protected]..
regards
Sankar

Please post the relevant parts of the logfile, I don'T think, someone here knows all the error messages out of his head..
Markus

Macbook Pro 17-Cannot install Snow Lep. How to solve the error message GUID

When I try to install Snow L., I get the error that my disk did not use the GUID partition table scheme. The install prog says to use the disk utility to change the partition scheme. It further says to select the disk and then the partition tab, and then the volume scheme and then use the option button to change it. Problem is that when I get that far, the option tab is greyed out. There is only one partition. This laptop was factory new January of this year. How do we do this without erasing everything and starting over?
PLEASE email <Edited by Host> if you can tell me (PLEASE) what to do. Lastly, I DO have a TM backup and Fusion is running XP Pro.

Regardless of your current dilemma you need to have a least one complete backup in some form. Disk drives fail - not if, only when.
You should get an external drive with enough capacity to contain a complete backup.
You can make a bootable clone using either:
SuperDuper! which I use. You can find it [here|http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html]
or Carbon Copy Cloner which many people also highly recommend which can be found [here|http://www.bombich.com/software/ccc.html].
SuperDuper! has a free version that will make a bootable clone, and Carbon Copy Cloner is donation ware.
Time Machine is also a good option.
I would start with a bootable clone. All it will cost you is the drive.
With a bootable clone you can boot it and verify that you have a working clone of your system before messing around with the MacBook Pro's internal drive..
I backup everything twice via 2 different methods: Time Machine to a Time Capsule and SuperDuper! to an external drive.
I learned the hard way that all disk drives are subject to failure even backup drives. I was very lucky, the backup device failed immediately after I had restored my wife's data to a new laptop after the laptop's drive failed.
I went to make a new backup of the new laptop and the drive was dead.
Disks are cheap and getting cheaper. If you value your data you need to have backups.
Steve

How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747

Cant sign into my apple store or my home share. The error message said I was not connected to the internet

I just bought Apple TV and want to use my PC as home base for my ITunes and home sharing. I up dated Itunes to the current software. When I attempted to sign into the apple store and turn on my home share I receive a error message stating I am not connected to the Internet making the Itune non functional
This is what the Error message read:
iTunes could not connect to the iTune Store. An unknown errror occurred 0x80092013

Hi, Heffy21.
Thank you for the question. This could be related to a simple issue or could result in a complex fix. Below, you will find the best troubleshooting articles for issues connecting to the iTunes Store. Be sure to try each step in the articles provided and test the results after each step.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Regards,
Jason H.

How to solve the error message Podcast cover art must be at least 1400 X 1400 pixel JPG or PNG, in RGB color space, and hosted on a server that allows HTTP head requests."

please help!! I've been trying to solve this error message for hours
the feed url is http://feeds.feedburner.com/goodstewards
the artwork url is http://www.goodstewards.com/wp-content/uploads/2014/11/logo.jpg
this is a wordpress domain that i am using with feedburner

"Your Blogger feed has no 'itunes' tags and is lacking the 'iTunes declaration' in the second line, so you have no image as far as the Store is concerned. You need to set Blogger to provide an itunes-compliant feed."
So, how do I set Blogger to do that? I was Googling for the answer, but nothing. I have "Allow Blog Feed" set to full and Title Links and Enclosure Links enabled.
"Your Feedburner feed link goes to a text page containing the code of a feed - this feed does have the 'itunes:...' tags. However in both feeds you are using Google Drive as a server for the image and media files and the URLs are prefaced with https (encrypted connection) - this may work in the Store but it is inadvisable and your URLs should begin with http."
Yeah, I couldn't think of another way to get you straight to the actual XML file. I guess what you are saying is that Google Drive does not have an appropriate server, which is why it gives https instead of http as a head.

How to solve the error HTTP/S connection was not obtained successfully?

Similar Messages

Maybe you are looking for