How to solve the footer problem?

In germany since the beginning of 2007 all business emails must be stamped by a company footer.
This sounds simple [Outgoing Content filter, add-footer ] but in reality it is a big problem, because most of users don't want to have a the company footer at the end of the email if they are sending a reply.
They expect the footer at the end of the new part they have written.
So the solution can be to use hard coded placeholder generated by the initial email system that is replaced by Ironport with the footer (depending on the company the user is a member of, different footers can be used e.g. by a ldap group query.)
:?: But ... How to replace the placeholder? It seem that this is not possible with Ironport or does anybody has an idea?
:idea: Another way to solve the problem can be to use a "Stamping header" instead of a footer. Such a header will be always at the top of the new part of an email, when you send a reply.
I asked support, it will be added to the wishlist for new releases.
So so far this is not a solution or does anybody know a workaround?
Regards
Stefan
Hello Stefan,
we have the same problem and found the best solution to do is to have company rules that apply on the client side.
This decission is based on the fact that already many companies use client based signatures (s-mime) and also client based encryption which makes a gateway solution impossible.
We found a nice solution for exchange/outlook based on group policies
Aas we are almost neighbours you are invited to visit us.
Greetings from Greven/Münster

Similar Messages

How to solve the setColor() problem with multithreading?

My fractal program uses a custom number of threads to draw the complete image. If I use just 1 thread, the image looks clean, if I use more threads some pixels of the image gets other colors. The problem ist the painting code:
g2d.setColor(col);
g2d.drawLine(x, y, x, y);as it is necessary to first set the color of the graphics object and then draw the line. I can solve this pixel color problem by synchronizing the Graphics2D object:
synchronized (g2d) {
g2d.setColor(col);
g2d.drawLine(x, y, x, y);
}but this slows the code down to times where just 1 thread is calculating the image. Unfortunately, I can't find a draw() method that has a color parameter.
I tried to divide the panel into multiple BufferedImages (1 for each thread) which solves the pixel problem but only the first BufferedImage get's drawn.

I solved my problem now. My solution is to use a separate BufferedImage for each Thread. I still had a bug where i didn't transformed the x/y coordinates of the complete image to the shifted x/y coordinates of the single BufferedImages, so that the threads draw the image out of the visible area which looked like all threads after the first only had a black image. After adjusting teh coordinates, the fractal now gets drawn correctly. And boy it's much faster with multiple threads - even on single core systems. On a dual core system, using 10-20 threads about doubles the performance as both cores have work almost all the time until the fractal is finished. :-)

How to solve the certificate problems in Java Web Start

Hi, All,
I encounted these two problems recently:
(1) I have an application which is supposed to be started by Java Web Start. I have written my own code which calls other .jar files from other companies. Since for web start, you need to sign all .jar files if you want more permssions. Now I got the following problem:
'=================================
An error occurred while launching/running the application.
Title: My stuff
Vendor: UCLA
Category: Launch File Error
JAR resources in JNLP file are not signed by same certificate
=================================
How to go around this? It seems that the .jar files from that company has been signed already. Then I tried to uncompress those jars and re-archieve again, then sign it again using the keystore I used to sign my own .jar files. It still does not work. Any help on this will be appreciated!
(2) Afterr I signed a .jar file, when I want to run it again, using command: java -jar abc.jar
It does not work any more, I am not sure whether it will become a problem if loaded by Web start.
Thanks a lot!
David

In another forum answer, a user named Dietz suggested the following:
If you have a library signed by another signer, you need to factor it out into a seperate extension jnlp file.
AJones0131

How to solve the error problem

Hi Devs ...
I have been learning Adobe Flex and using IDE Flash Builder 4. but Im fasing an unsolve able problem in code given bellow..
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                xmlns:mx="library://ns.adobe.com/flex/mx" layout="vertical" minWidth="955" minHeight="600">
    <fx:Declarations>
        
    </fx:Declarations>
    <mx:states>
        <mx:State name="details"> /////////Here comes an error saying:-->State overrides may no longer be explicitly declared. The legacy states                                                                     /////syntax has been deprecated.
            <mx:AddChild position="lastChild">
                <mx:Text text="About Picture" width="200" fontWeight="bold"/>
            </mx:AddChild>
            <mx:AddChild position="lastChild">
                <mx:Text text="this is the picture of futue of Windows" width="200"/>
            </mx:AddChild>
        </mx:State>
    </mx:states>
    <mx:Image source="assets/att66298.jpg" rollOver="currentState='detail'"/>
</mx:Application>
please tell me how to slove this error problem.
Arshay..


<root>
< myxml label="something" >
</root>

<root>
<myxml label="something">
</myxml></root>

TS1559 WIFI solutions proposed by Apple are not working. Does oneone how to solve the WIFI problems?

Dear Apple.
I was really happy with my iphone4s, IOS 6.0, great product amazing quality and posibilities BUT.......
I updated from IOS 6.0 to 6.1.1. and the WIFI nightmare started.
I waited for a new update to fix the WIFI problems and I updated my iphone 4s from 6.1.1. to 6.1.2. in order to solve these problems related with WIFI connections.
But IOS 6.1.2. is even worst:
- WIFI is not working at all. So I cannot download apps greater than 50MB.
- Battery life is shorter than ever.
- 3G goes in and out every minute.
- When you operate the iphone4s you can realize that is hotter than before.
These problems are unnaceptable and inconsistent with a high quality standard product.
You can read a lot of blogs, I am not the only one.
Please give us a solution as soon as possible.
Best Regards
AICITEL

Thank you for your support.
My router is a TL-WR740N, and I think it has only a 2.4-2.4835GHz antenna.
So it seems that I have to keep on trying.
I also tryed to rename the router, still nothing.
Thank you anyway.
FYI.
4 puertos LAN de 10/100Mbps
1 puerto WAN 10/100Mbps
Botón
Botón de configuración rápida de seguridad
Botón de reinicio
Suministro de Energía Externa
9VDC / 0.6A
Estándares Inalámbricos
IEEE 802.11n*, IEEE 802.11g, IEEE 802.11b
Antena
omnidireccional fijo de 5dBi
Dimensiones (Largo x Ancho x Alto)
6.9 x 4.6 x 1.3 in. (174 x 118 x 33 mm)
Frecuencia
2.4-2.4835GHz
Velocidad de Señal
11n: Hasta 150Mbps (dinámico)
11g: hasta 54Mbps (dinámico)
11b: hasta 11Mbps (dinámico)
EIRP
<20dBm(EIRP)
Sensibilidad de Recepción
130M: -68dBm@10% PER
108M: -68dBm@10% PER
54M: -68dBm@10% PER
11M: -85dBm@8% PER
6M: -88dBm@10% PER
1M: -90dBm@8% PER
Funciones Inalámbricas
Activar / Desactivar radio inalámbrica, WDS Bridge, WMM, estadísticas inalámbricas
Seguridad Inalámbrica
64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK
Tipo WAN
IP dinámica / IP estática / PPPoE /
PPTP (Acceso dual) / L2TP (Acceso dual) / BigPond
DHCP
Servidor, cliente, lista de cliente DHCP,
Reserva de dirección
Calidad de Servicio
WMM, Control de Ancho de Banda
Redireccionamiento de Puertos
servidor virtual, Port Triggering, UPnP, DMZ
DNS Dinámico
DynDns, Comexe, NO-IP
Puerto de Transferencia VPN
PPTP, L2TP, IPSec (ESP Head)
Control de Acceso
Control Parental, Control de Manejo Local, Lista de anfitriones, la Lista de acceso, manejo de reglas
Seguridad Firewall (cortafuegos)
DoS, SPI Firewall
Dirección IP Filtro / Filtro de dirección MAC / filtro de dominio
Conexiones de direcciones IP y MAC
Management
Control de acceso
Manejo Local
Manejo remoto
Certificación
CE, FCC, RoHS
Contenido del Paquete
TL-WR740N
1 fijo antenas omnidireccionales
Fuente de alimentación
CD de recursos
Guía de instalación rápida
Requisitos del Sistema
Microsoft ® Windows ® 98SE, NT, 2000, XP, Vista ™ o Windows 7, Mac ® OS, NetWare ®, UNIX ® o Linux.
Ambiente
Temperatura de funcionamiento: 0¿ ~ 40¿ (32¿ ~ 104¿)
Temperatura de almacenamiento: -40¿ ~ 70¿ (-40¿ ~ 158¿)
Humedad de funcionamiento: 10% ~ 90% sin condensación
Humedad de almacenamiento: 5% ~ 90% sin condensación

How to solve the OB problem of 'Raw Materials' account in Trial Balance?

Dear Friends,
In a 'Perpetual Inventory' system how to show the opening balance of Inventory Account in Trial balance as other account's opening balance?
You can check this out with some opening balances entered for GL Accounts (from Administration -> system initialization -> opening balance) and some initial quantity of inventory items entered (in inventory transactions) on - let's say a company's starting date 1-1-06.

Hi Gordon,
My SBO version is 8.8 PL 10, Indian Database. I want to see the "Raw Material" G/L Account's opening balance in the Opening Balance Column of Trial Balance or similar report of SBO. The technical problem behind this is - the mentioned reports shows the the amounts in OB column if that amount is entered by the OB Transactions (in Administration -> System Initialization). But how to manage the Raw Material / Inventory G/L through this concept, as the OB amount for this is entered through Inventory Initial Quantity. We can do the entry one day before the expected starting date of the financial period, is that can be a standard practice? For. e.g. entering the opening balance for 1-1-06 on 31-12-05.

How to solve the error problem error:1088 in flex builder 3

I'm facing an error while creating an application from Database using wamp web server please tell me how to solve this?


<root>
< myxml label="something" >
</root>

<root>
<myxml label="something">
</myxml></root>

How to solve the JCO problem

hi, everybody
In my project, I must run some RFC to get my result. But when I build, deploy and run my project, error has happened as follows:
" com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'WD_FLIGHTLIST_RFC_METADATA_DEST' in the SLD. No such JCO destination is defined in the SLD. "
I wonder if I have not config my jco destination yet.
Would you please give my a help! 3KS!

Hi Daniel,
As suggested by Govindu, adding document related to your issue to resolved.
[Web Dynpro Best Practices|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/7.0/portal%20integration/how%20to%20configure%20the%20jco%20destination%20settings.pdf]
[System Landscape Directory Process and JCo Configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?quicklink=index&overridelayout=true]
Refer to Failed to resolve JCO destination name 'WD_RFC_METADATA_DEST' in the SLD for similar discussions.
Hope it will helps
Regards
Arun Jaiswal

How to solve the following problem? Thanks.

Create an interface with at least one method, in its own package. Create a class in a separate package. Add a protected inner class that implements the interface. In a third package, inherit from your class and, inside a method, return an object of the protected inner class, upcasting to the interface during the return.

Life is essentially simple, we just love to make it complicated. I am quite sure, the effect you are trying to achieve by what you are doing can be done in a much simpler way.
In theory it is fine - on production floor if you do it, being the architect I most definitely am going to fire you.
It is easy to obfuscate code by pulling these kind of stunts - nobody (even you yourself) will understands this later.
Keep your thinking as well as your code and logic simple, systems become easier to build and maintain.
I shall intentionally not answer your question. There are certain knowledge which is better not given - if the potential lies that it shall be used otherwise :D
No offence intended though
Ironluca

How can solve the problem in email " SMTP Relay "Message rejected" ", how can solve the problem in email " SMTP Relay "Message rejected" "

Dear sirs,
how to solve the mail problem which occurs while I am abroad; bearing in mind that I use HOTSPOT and sometime it's sending emails sometime getting the below messages " SMTP Relay "Message rejected"

The outgoing mail server is rejecting mail from your network address. Typically that happens when your mail service provider is also your ISP, and you connect to it from another network. The SMTP server will allow connections without a password from anywhere, but it will only relay mail from within the ISP's network. It could also be that your account on the server has expired or been suspended.
If you need to send mail from outside your ISP's network, use an independent mail service provider. I don't have a specific recommendation.

Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones and it never worked. Does anyone has an idea how to solve the problem? Tks.

Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones but it never worked. Does anyone has an idea how to solve the problem? Tks.

This is not a feature of iPhone, iPad or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the
app store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording)

How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help please

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

You're not speaking to Apple on in this forum, nor will someone from Apple see this post. We are just users like you and I.
Have you tried to restore or reset your phone?
Or contact your carrier in re: to your sim card

I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report:          8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
      Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE            1
com.intego.iokit.BehavioralKext            1
com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
com.intego.kext.VirusBarrierKPI            10.6.8
com.globaldelight.driver.BoomDevice            1.1
com.huawei.driver.HuaweiDataCardACMData            4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE            1
com.intego.iokit.BehavioralKext            1
com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
com.intego.kext.VirusBarrierKPI            10.6.8
com.globaldelight.driver.BoomDevice            1.1
com.huawei.driver.HuaweiDataCardACMData            4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker.

I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

Hi Jboudet,
Welcome to Apple Support Communities.
You can find some suggestions for troubleshooting your iPhone at these links:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Have a good one,
Jeremy

How to solve the footer problem?

Similar Messages

Maybe you are looking for