How to solve the middle dark line when I use officejet all in one the copy function?

The printer function is good, but only has problem in copy functioln. How to clear the middle dark line?
This question was solved.
View Solution.

Hello tseng0719,
I think it would be useful to have some more information in this case. For example:
Which printer do you have? Do this happen when you copy from the flatbed or from the adf? Do this also happen when you scan a picture?
A quick tip would be to clean the scanner glass as it migh very well be that it's just down to dirt on the glass (especially if this happens when you scan via the adf).

Similar Messages

My wife got the iPhone 4s and when backed up with her old one the app store app

Got the new iPhone 4s and when backed up with my old one (one of the first) the app store & other apps disappear, can someone advise?

If they are pre-installed apps they cannot be deleted so they may have inadvertently moved it onto another screen or into a folder, Utilities appears to be a common folder so check to see if that has been created. Check all screens and folders and do a search in Spotlight, it will tell you if the apps are still on your iPhone but unfortunately not where they are. If you find them on one or your screens or in a folder, press the icon until it wiggles and then drag it back to where you want it. I would also suggest you check restrictions, particularly as you mention the app store icon - Settings>General>Restrictions>Installing Apps & Deleting Apps>ON. Alternatively you can reset your home screen in Settings>General>Reset>Reset Home Screen Layout.

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Well then maybe you could take a screenshot because the appearance of such a window is news to me.
Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply.

I have downloaded firefox and it always is locking up when I am in the middle of something, acts like I am not connected to the internet and then I have to restart my computer how can I retify this?

I have downloaded firefox and it always is locking up when I am in the middle of something, acts like I am not connected to the internet and then I have to restart my computer how can I retify this?

Hi Francis,
Are you getting kernel panics?
http://support.apple.com/kb/TS3742
http://www.thexlab.com/faqs/kernelpanics.html

I have a DAQ Assistant configured to read multiple channels at the same time. When I wire a graph indicator to the output, I see all of my signals jumbled together. How do I split them up into seperate signals?

I have a DAQ Assistant configured to read 2 channels at the same
time. When I wire a graph indicator to the output, I see the 2
signals jumbled together. How do I split them up into seperate signals?
When I wire any type of indicator it is showing just one output of a single channel.
I want 2 indicators showing 2 different signals as expected from the 2 channels configured. How to do this?
I have tried using split signal but it end up showing only 1 output from 1 signal in both the indicators.
thanks in advance.
Solved!
Go to Solution.

Yes you are right. I tried that but I did not get the result.
I just found the way. When we launch split signal, we should expand it (split signal icon) from above and not from below. It took me a while to figure out this.
thanks

Can anyone knows how to fix back camera having pink lines when i use it so please help me thank you

can anyone knows how to fix back camera having pink lines when i use it so please help me thank you
<Email Edited by Host>

You're welcome.
The 6.1.4 update had nothing to do with this. If it did, then every iPhone with 6.1.4 installed would have the same problem.
Apple doesn't support downgrading the firmware, which won't change anything.
If an Apple Store is miles away, then call AppleCare.

How to solve this problem, pls help when I try to see remote camera system from home."Dual streaming is required for HTML viewing"

How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"

I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
So far the problem with the 64 bit side of it is still to be resolved.
Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
Craig

How do I disable firefox off line it will not let me connect to the web

how do I disable firefox off line, it will not let me connect to the web

Go into settings and reset all network connections. Then restart your device by holding the power and home button until the Apple logo appears. You will not lose any data. When the device restarts connect to your wireless network.

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

When I use my Apple ID for the last 12 hours I get this response: "There was an error in the App Store. Please try again later. (4)". How do I get around this? Try two apple ID's. Same thing.

When I use my Apple ID for the last 12 hours I get this response: "There was an error in the App Store. Please try again later. (4)". How do I get around this? Try two apple ID's. Same thing.

What does it mean when I get...: Apple Support Communities
'there was an error in the App Store....: Apple Support Communities

How to solve problem - " Safari cannot open page because it isn't connected to the internet" but the airport is ok. signal full and i have n IP address.

How to solve problem - " Safari cannot open page because it isn't connected to the internet" but the airport is ok. signal full and i have n IP address. and i m using Macbook pro.
OS snow leopard and above...

Do you have this problem with all websites, or only some? If only some, which ones?

I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP. When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?

I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP. When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?
Is there a parameter I should be using in the XML or is there a setting in Peoplesoft that will accomplish this?
Jim

sundy.liu wrote:
Unfortunately however, even with the TCP tweaks enabled, I still only get a little over 1 Gb/s through the two aggregated Gig ports. It seems as though the aggregation is only using one port, though MRTG graphs of the two switch ports do in fact show that they are both being utilized equally, essentially splitting the 1 Gb/s speed between
the two ports.
Problem with the server? switch? Aggregation software? All the above? At any rate, I seem to be missing something.. Any help regarding this issue would be greatly appreciated!If you're only running a single stream, that's all you'll see. Teaming/aggregating doesn't make one stream go faster.
If you ran two streams simultaneously, then you should see a difference between a single 1G interface and an aggregate of two 1G interfaces.
Darren

TS4002 I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed but when searching I can't find same being used. How do I find out where that particular email adress is use

I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed When searching I can't find same being used anywhere. How do I find out where that particular email adress is used so I can delete it there and use it for my new apple-id?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.

How can I input read a line from a file and output it into the screen?

How can I input read a line from a file and output it into the screen?
If I have a file contains html code and I only want the URL, for example, www24.brinkster.com how can I read that into the buffer and write the output into the screen that using Java?
Any help will be appreciate!
======START FILE default.html ========
<html>
<body>
 
<center>

Welcome to a DerekTran's Website! 
Underconstructions.... 
 </center>
 
Hello, 
 
I've been using the PWS to run the website on NT workstation 4.0. It was working
fine. 
The URL should be as below: 
http://127.0.0.1/index.htm or http://localhost/index.htm
And suddently, it stops working, it can't find the connection. I tried to figure
out what's going on, but still NO CLUES. Does anyone
know what's going on? Please see the link for more.... I believe that I setup
everything correctly and the bugs still flying in the server.... 
Thank you for your help.

PeerWebServer.doc
 
CannotFindServer.doc
 
HOSTS file is not found
 
LMHOSTS file
 
How to Setup PWS on NT
 
Issdmin doc
Please be patient while the document is download....
 If you have any ideas please drop me a
few words at [email protected] 
 
 

 
</body>
</html>
========= END OF FILE ===============

Hi!
This is a possible solution to your problem.
import java.io.*;
class AddressExtractor {
 public static void main(String args[]) throws IOException{
 //retrieve the commandline parameters
 String fileName = "default.html";
 if (args.length != 0) fileName =args[0];
 else {
 System.out.println("Usage : java AddressExtractor <htmlfile>");
 System.exit(0);
 BufferedReader in = new BufferedReader(new FileReader(new File(fileName)));
 StreamTokenizer st = new StreamTokenizer(in);
 st.lowerCaseMode(true);
 st.wordChars('/','/'); //include '/' chars as part of token
 st.wordChars(':',':'); //include ':' chars as part of token
 st.quoteChar('\"'); //set the " quote char
 int i;
 while (st.ttype != StreamTokenizer.TT_EOF) {
 i = st.nextToken();
 if (st.ttype == StreamTokenizer.TT_WORD) {
 if (st.sval.equals("href")) {
 i = st.nextToken(); //the next token (assumed) is the '=' sign
 i = st.nextToken(); //then after it is the href value.
 getURL(st.sval); //retrieve address
 in.close();
 static void getURL(String s) {
 //Check string if it has http:// and truncate if it does
 if (s.indexOf("http://") > -1) {
 s = s.substring(s.indexOf("http://") + 7, s.length());
 //check if not mailto: do not print otherwise
 if (s.indexOf("mailto:") != -1) return;
 //printout anything after http:// and the next '/'
 //if no '/' then print all
 if (s.indexOf('/') > -1) {
 System.out.println(s.substring(0, s.indexOf('/')));
 } else System.out.println(s);
}Hope this helps. I used static methods instead of encapsulating everyting into a class.

I just bought a 13inch mac book with retina display. When Im using adobe illustrator or photoshop, the fonts and designs look pixelated! How can I fix this?

I just bought a 13inch mac book with retina display.
2.4GHz dual-core Intel Core i5 processor with 3MB shared L3 cache. Version 10.9.4 / OS X Mavericks
When Im using adobe illustrator or photoshop, the fonts and designs look pixelated!
How can I fix this?

WOW!!
That was great to hear.
I have just read this tread: https://forums.adobe.com/thread/1626784?start=0&tstart=0
So therefore I was worry about Illustrator which I use most of all programs.
Thank you !!

How to solve the middle dark line when I use officejet all in one the copy function?

Similar Messages

Maybe you are looking for