How to Solve the Pain of Permissions???
Hi,
I asked this question a long time ago when I got my new G5, but never got a satisfactory answer.
Only my wife and myself use our iMac G5, and we both want equal administrator rights, permissions, ownership, whatever you call it. I want to stop having to constantly change permissions etc. every time I want to save something to my wife's side of the computer or even the shared folder (which doesn't let us both save stuff etc.).
Is there a simple way to do this? It would seem to me to be quite basic but I've been trying for a year to sort it out! We don't want to have hundreds of duplicates of music etc., or have to put everything into 'shared'. Even when I do put stuff in shared, it still only lets the original owner change it.. which means entering passwords etc. and some apps won't even let you enter a pass and won't allow you to save changes.
Thanks for any help,
Theo
You can either share one account, or use these instructions to change the UID on one account so that both accounts have the same UID; either option will allow each of you full access to the other's files and folders as long as that account isn't protected by FileVault. If you choose to change the UID, back up everything from both accounts before proceeding.
The Ignore Permissions option is only available for disks other than the startup disk; unless both home folders have been moved to another disk or partition, you won't be able to use this option. Having FileVault enabled encrypts the home folder and prevents other accounts from accessing it without knowing the password set for it.
(18568)
Similar Messages
-
How to solve the problem of "promotion failed"
Hello,
I am new to JVM tuning, could anybody help me and explain how to solve a problem of "promotion failed" as following? (Java 1.6 and the JVM options: -XX:+UseConcMarkSweepGC -XX:NewSize=128m -XX:MaxPermSize=256m ):
[GC 96800.304: [ParNew (promotion failed): 287552K->287552K(287552K), 0.8694459 secs]96801.174: [CMS: 5229568K->457193K(5971968K), 19.7176579 secs] 5499429K->457193K(6259520K), [CMS Perm : 66540K->66458K(110904K)], 20.5878599 secs] [Times: user=22.50 sys=0.03, real=20.59 secs]
bevor: 96755.515: [GC 96755.515: [ParNew: 287552K->31936K(287552K), 0.1900583 secs] 5491052K->5243813K(6259520K), 0.1905515 secs] [Times: user=2.21 sys=0.00, real=0.19 secs]
after: 96885.774: [GC 96885.774: [ParNew: 255484K->31936K(287552K), 0.0808239 secs] 712678K->490703K(6259520K), 0.0812894 secs] [Times: user=0.97 sys=0.01, real=0.08 secs]
my questions:
1. why did the promotion failed when the old generation apears to have enough space (5229568+287552=5517120 < 5971968)? muss "promotion failed" by all means be handelt?
2. [CMS: 5229568K->457193K(5971968K), 19.7176579 secs]: is this full GC and is the time of 19.7176579 really pause (stop the world) time?
3. [CMS Perm : 66540K->66458K(110904K)], 20.5878599 secs]: why ist Permanent space collected too? dit it take a time of 20.5878599-19.7176579=0.870202 ? this action apears to be unnessesary (66540K->66458K), is es possible to disable such aktion?
4. how to solve the problem? I read a post of fixing such problem with XX:SurvivorRatio=4 -XX:CMSInitiatingOccupancyFraction=75, But this did not work for my case.
could this problem be due to the fragmentation of old generation space? could the reduce size of PLAB improving reuse of small chunks like -XX:OldPLABSize=16 help in my case? what ist the default value of OldPLABSize of JAVA 6 ? is there any side-effect for the reduce OldPLABSize?
thanks a lot for any help!
TianLooks like your old generation has become fragmented and the old space is almost full, or maybe a promoted object is too huge, and there is not enough continue space. Try following:
1> increase the size of old generation.
2> If increase the size of old generation doesnt work , you may try to use G1 algorithm, it may reduce the fragment problem of old generation.
Thanks
Amrit -
HOW TO SOLVE THE R6034 ERROR IN ITUNES INSTALATION
I need toknow how to solve the R6034 error in itunes instalation becouse y can´t buk up muy phone
How to solve this ?
#import <UIKit/UIKit.h>
int main(int argc, char *argv[]) {
NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
-> int retVal = UIApplicationMain(argc, argv, nil, nil);
[pool release];
return retVal; -
Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones but it never worked. Does anyone has an idea how to solve the problem? Tks.
This is not a feature of iPhone, iPad or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the
app store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording) -
how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help pleaseThanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[ 8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[ 8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[ 8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ... -
Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?
You're not speaking to Apple on in this forum, nor will someone from Apple see this post. We are just users like you and I.
Have you tried to restore or reset your phone?
Or contact your carrier in re: to your sim card -
I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report: 8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE 1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker. -
How to solve the delay from 'SWW_WI_ADMIN_CALLBACK'.
Hi expert,
We have a workflow in Send Notified vai SAP Express and
E-mail step that is delayed occasionally. Each time it happens, I've noticed that the log (see below) contains an entry for SWW_WI_ADMIN_CALLBACK that executes
for 10 to 15 minutes before the next step of the
workflow. This does not happen all the time, only occasionally.
Workflow System (Sub)workflow created 15.07.2008 10:08:12
Workflow System Execution started automatically 15.07.2008 10:08:12
Workflow System SWW_WI_ADMIN_CALLBACK 15.07.2008 10:20:05
I want your help about
- What's 'SWW_WI_ADMIN_CALLBACK' ?
- How to solve the problem ?
Thanks for your help.
KP.Have either of you tried a Reset Settings yet? (Settings App -> General -> Reset -> Reset All Settings NOT Erase All Content and Settings.) You could also try just the "Reset Network Settings" first too. Resetting settings will purge your lock screen and wallpaper, and probably some other things that will be annoying for a bit (like turning back on the keyboard clicking sound,) but it seemed to help my problems.
I work on iPhone problems all day (mostly backup and restore right now), so I collect a lot of the debugging logs. I saw a lot of networking error garbage on my 5S right after upgrading from iOS7 that was vastly reduced after doing a reset all settings (I wish I would have tried just Reset Network Settings first, so I knew if that worked alone.)
If that still doesn't help, I would love to take a look at your phone debug logs (like I said, I do iPhone troubleshooting all day, so investigating and hopefully fixing a serious problem sounds exciting to me ) If you want, you can contact me through my company's webpage: http://deciphertools.com/support.html and we can start looking at what kind of errors are happening while the wifi is acting up. You can mention my name directly, Kelly, so you know the message gets to me! (This is an open invitation to anyone having serious wifi problems after the update, not just mendoSYK and tragic330.)
(Note: As I mentioned, the link I am posting is to my company's website. So, I stand to benefit, financially or otherwise, from the link I am providing.) -
I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you
Hi Jboudet,
Welcome to Apple Support Communities.
You can find some suggestions for troubleshooting your iPhone at these links:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Have a good one,
Jeremy -
Question to all iPad users please help in this issue
How to solve the problem of connecting my iPad to Itunes while my iPad not working and show to connect to iTunes?
Thank you for help out.Hi Jamalzoal,
Dose your computer have the most recent iTunes on it? When you connect the iPad 2 to your computer what happens? dose iTunes tell you the iPad need to be restored?
p.s. you post this question in the Apple Remote Desktop community. You would probable have gotten more an fast responses if you posted this in the iPad community. -
How to solve the issue "CUV check user equivalence failed" ?
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
In order to install Grid Infrastructure, we need to run Cluster Utility Verification (CUV) at first by running the cammand below:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output:
Performing pre-checks for cluster services setup
Check: User equivalence for user “ora11g”
Node Comment
rac1 failed
rac2 failed
Result: PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
Pre-check for cluster services setup was unsuccessful on all the nodes.
As you see above, check user equivalence failed. I have run the 4 commands to fix this error as below:
[ora11g@rac1 /]$ ssh-keygen
Its output:
Generating public/private rsa key pair.
Enter file in which to save the key (/home/grid/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/grid/.ssh/id_rsa.
Your public key has been saved in /home/grid/.ssh/id_rsa.pub.
The key fingerprint is:
0c:10:6c:3b:ae:21:63:64:f8:0d:0e:d8:f0:41:32:ff [email protected]
[ora11g@rac1 .ssh]$ cat *pub >>authorized_keys
[ora11g@rac1 .ssh]$ ssh rac1
Its output:
The authenticity of host ‘rac1 (127.0.0.1)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
[ora11g@rac1 .ssh]$ ssh rac1-priv
Its output:
The authenticity of host ‘rac1-priv (192.168.137.35)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1-priv,192.168.137.35′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
After run the 4 commands above, I run the command below again:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output is the same:
PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
I think the problem is "Broken pipe" and ssh cannot write authorized_keys to the machines.
My question is:
Do any folk understand how to solve the issue CUV "check user equivalence failed" for 2 VMs ?
Thanks.Folks,
Hello. Thanks a lot for replying.
I have installed Grid Infrastructure a few times. Each time, on step 7 of 9, the installer fixes and checks 2 machines correctly. The entire installation has 3 parts as below:
1) Install Grid Infrastructure for a Cluster
2) Execute Root Scripts for Install Grid Infrastructure for a Cluster (script is root.sh)
3) Configure Oracle Grid Infrastructure for a Cluster that includes NCA, ASMCA, PICA and CVU.
Each time, on step 8 of 9, the Installer installs Grid Infrastructure for a Cluster successfully that includes "Prepare, Copy files, Link binaries, Setup files and Perform remote operations".
But when the Installer get to part 3 CVU, it fails and then the Database cannot be installed.
Deinstall Grid is a very complicated process to do. Because of this reason, we need to run CVU at first to make sure everything is correct for 2 machines before install Grid.
Even we ignore "user equivalence (ssh)", we don't know whether other items can be passed or not because CVU cannot proceed to check the machines.
My question is:
How to have the script "runcluvfy.sh" continue to check the machines while confronting "user equivalence failed" ? -
Script:how to solve the following
Hi to all,
Can u please tell me how to solve the following:
Created standard texts, styles, character strings and called them in layout sets copied the standard layout set from client '000' further modified the layout according to requirements.
Thanks in advance.
Regards
MonalisaSTATUS in USER_OBJECTS
"OBJECT_NAME"
"SUBOBJECT_NAME"
"OBJECT_ID"
"DATA_OBJECT_ID"
"OBJECT_TYPE"
"CREATED"
"LAST_DDL_TIME"
"TIMESTAMP"
"STATUS"
"TEMPORARY"
"GENERATED"
"SECONDARY"
"NAMESPACE"
"EDITION_NAME"
"CUSTOMERS"
70645
70645
"TABLE"
03-AUG-13
03-AUG-13
"2013-08-03:17:59:09"
"VALID"
"N"
"N"
"N"
1
"CUSTOMERS_PK"
70646
70646
"INDEX"
03-AUG-13
03-AUG-13
"2013-08-03:17:59:09"
"VALID"
"N"
"N"
"N"
4
"DEPARTMENTS_PK"
70656
70656
"INDEX"
03-AUG-13
03-AUG-13
"2013-08-03:18:32:32"
"VALID"
"N"
"N"
"N"
4
"EMPLOYEES"
70657
70657
"TABLE"
03-AUG-13
03-AUG-13
"2013-08-03:18:32:57"
"VALID"
"N"
"N"
"N"
1
"DEPARTMENTS"
70655
70655
"TABLE"
03-AUG-13
03-AUG-13
"2013-08-03:18:32:32"
"VALID"
"N"
"N"
"N"
1
"EMPLOYEES_PK"
70658
70658
"INDEX"
03-AUG-13
03-AUG-13
"2013-08-03:18:32:57"
"VALID"
"N"
"N"
"N"
4
"SUPPLIERS"
70659
70659
"TABLE"
03-AUG-13
03-AUG-13
"2013-08-03:20:25:41"
"VALID"
"N"
"N"
"N"
1
"SUPPLIERS_PK"
70660
70660
"INDEX"
03-AUG-13
03-AUG-13
"2013-08-03:20:25:41"
"VALID"
"N"
"N"
"N"
4
"PRODUCTS"
70661
70661
"TABLE"
03-AUG-13
03-AUG-13
"2013-08-03:20:28:32"
"VALID"
"N"
"N"
"N"
1
"PRODUCTS_PK"
70662
70662
"INDEX"
03-AUG-13
03-AUG-13
"2013-08-03:20:28:32"
"VALID"
"N"
"N"
"N"
4
"PERSONS_PK"
70687
70687
"INDEX"
10-AUG-13
10-AUG-13
"2013-08-10:22:37:34"
"VALID"
"N"
"N"
"N"
4
"PERSONS"
70686
70686
"TABLE"
10-AUG-13
10-AUG-13
"2013-08-10:22:37:34"
"VALID"
"N"
"N"
"N"
1
"APEX_SYS_PCK"
70776
0
"PACKAGE"
13-AUG-13
15-AUG-13
"2013-08-15:19:56:47"
"INVALID"
"N"
"N"
"N"
1
"GET_LOGIN_CREDENTIALS"
70775
0
"PROCEDURE"
13-AUG-13
13-AUG-13
"2013-08-13:22:26:49"
"INVALID"
"N"
"N"
"N"
1
"APEX_SYS_PCK"
70792
0
"PACKAGE BODY"
15-AUG-13
15-AUG-13
"2013-08-15:19:56:47"
"INVALID"
"N"
"N"
"N"
2
"EMP_MAINT"
70802
0
"PACKAGE"
15-AUG-13
15-AUG-13
"2013-08-15:19:54:39"
"INVALID"
"N"
"N"
"N"
1 -
how to solve the warning and severe error....................
[oracle@ip-********* Oracle11g_R2]$ emca -deconfig dbcontrol db -repos drop
STARTED EMCA at Mar 29, 2012 10:20:41 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: testdb11g3
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
Mar 29, 2012 10:22:13 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_22_20_40.log.
Mar 29, 2012 10:22:13 PM oracle.sysman.emcp.EMDBPreConfig performDeconfiguration
WARNING: EM is not configured for this database. No EM-specific actions can be performed.
Mar 29, 2012 10:22:13 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM
Configuration Assistant again .
Refer to the log file at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_22_20_40.log for more details.
Could not complete the configuration. Refer to the log file at
/u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_22_20_40.log for more details.
[oracle@ip-******* Oracle11g_R2]$ cdtried but getting the same error.............
[oracle@ip-10-68-199-69 oracle]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 29-MAR-2012 23:37:21
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u02/oracle/Oracle11g_R2/product/11.2.0/dbhome_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /u02/oracle/Oracle11g_R2/product/11.2.0/dbhome_1/network/admin/listener.ora
Log messages written to /u02/oracle/Oracle11g_R2/diag/tnslsnr/ip-10-68-199-69/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 29-MAR-2012 23:37:21
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/oracle/Oracle11g_R2/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u02/oracle/Oracle11g_R2/diag/tnslsnr/ip-10-68-199-69/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@ip-10-68-199-69 oracle]$ sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Thu Mar 29 23:37:34 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter user-name: sys/Ashwin
ERROR:
ORA-28009: connection as SYS should be as SYSDBA or SYSOPER
Enter user-name: sys/Ashwin as sysdba
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> shutdown abort
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 1603411968 bytes
Fixed Size 2213776 bytes
Variable Size 402655344 bytes
Database Buffers 1191182336 bytes
Redo Buffers 7360512 bytes
Database mounted.
Database opened.
SQL> exit
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@ip-10-68-199-69 oracle]$ emca -deconfig dbcontrol db -repos drop
STARTED EMCA at Mar 29, 2012 11:55:28 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: testdb11g3
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
Mar 29, 2012 11:55:57 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_23_55_27.log.
Mar 29, 2012 11:55:57 PM oracle.sysman.emcp.EMDBPreConfig performDeconfiguration
WARNING: EM is not configured for this database. No EM-specific actions can be performed.
Mar 29, 2012 11:55:57 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_23_55_27.log for more details.
Could not complete the configuration. Refer to the log file at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_23_55_27.log for more details. -
Dear sirs,
how to solve the mail problem which occurs while I am abroad; bearing in mind that I use HOTSPOT and sometime it's sending emails sometime getting the below messages " SMTP Relay "Message rejected"The outgoing mail server is rejecting mail from your network address. Typically that happens when your mail service provider is also your ISP, and you connect to it from another network. The SMTP server will allow connections without a password from anywhere, but it will only relay mail from within the ISP's network. It could also be that your account on the server has expired or been suspended.
If you need to send mail from outside your ISP's network, use an independent mail service provider. I don't have a specific recommendation. -
How To solve the error FJS 0012 during installation IDES4.7
Hi,
I got an error FJS00012 during installation of IDES4.7. How to solve the problem? is there any way to solve the problem..... please suggest me.... and send a mail to [email protected]..
regards
SankarPlease post the relevant parts of the logfile, I don'T think, someone here knows all the error messages out of his head..
Markus
Maybe you are looking for
-
My problems with WiFi after 10.5.8 update (and how I solved them)
Hi, I also had problems getting online after last Leopard update. First I tried to delete all network related preferences (as posted here http://discussions.apple.com/message.jspa?messageID=9965959#9965959) but soon the problem reappeared. I need to
-
I need to determine which version of windows os in on the computer running my application to make some minor adjustments to a subvi. Is there a programmatic way to determine this using Labview.
-
Partial Reversal or Clearace of Bill Liability in F-20
Dear Team, We have new scenario & realised one bill but partly.We want to reverse the same in F-20 & thing is that how we can make partial reversal of the bill liablity because bill not realised completely.When we selected reference bill in F-20 but
-
ISE 1.3 and Instant Access "Limited support"
Hello The Cisco 1.3 compatability matrix http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/compatibility/ise_sdt.pdf indicates that "Limited support, some functionalities are not supported" applies to ISE 1.3 Profiling when using Cat 6848ia switc
-
Can Contributors access Visio documents in SharePoint library
Hi, Can site contributors view / edit Visio documents in SharePoint library? Please anyone help me on this.