How to solve the smart hard disk error?
I got error message from my smart hard disk also failed hard disk test tried to solve some I know step but I couldn't it boot and get back yet need your help right the way,please help me
The only way to "solve" it is to get a new hard drive. SMART error messages mean what they say.
Similar Messages
-
How to resove the "smart hard disk error" problem occured message displayed while starting up?
Dear HP Technician
My HP laptop showing me a "Smart Hard disk Error" while starting up the computer when I press power button on.
The message displayed on black screen is as below:
Smart hard disk error
The smart disk check has detected an imminent failure. To ensure not data loss, please backup the content immidiately and run the Hard Disk Test in system Diagnostics.
Hard Disk 1 (301)
F2 system Diagnostics
Enter-continue startup
Fore information, please visit:
www.hp.com/go/techcenter/startup
I already did the Hard disk self test and it showed all the test were passed.
Please help me to resolve this problem
thank you
regards
neeraj
+61 0432247152There are 2 ways of running a test on your hard drive . One way is through BIOS (F10) and other is through HP System diagnostics(F2). How exactly was test initiated from your end ?
The SMART imminent failure for Hard drive is an indication that your Hard drive is on verge of failure or might fail anytime depending on usage. I would recommend you to backup your files immediately because your hard drive might die at any moment and I'm pretty sure its needs to be replaced.
Kindly check the instructions over here in order to run the test for your hard drive
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!! -
Can't boot into bios due to SMART Hard Disk Error
My hard drive failed and now im getting constant pop ups to replace it
I'm thinking about transfering windows to an external drive until I can replace the internal one but I need access to the bios to set the boot priorty options anytime I use f10 to boot into the bios it's like it's skipped over and gives me the smart hard disk error screen where my only options are to boot into windows or run diagnostics.
I tried running diagnostics but each test resulted in an instant failure.Yes take out hard drive and connect it to another PC. Get help from your service manual for procedure for taking it out:
http://h10032.www1.hp.com/ctg/Manual/c02659236
Adapter, something like this: http://www.amazon.com/Anker®-Converter-Adapter-Cable-included/dp/B005B3VO24
For configuring boot order, try this:
http://support.hp.com/in-en/document/c00364979
Tap f9 key soon after powering on notebook, if the above don't work.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
Product: HP Pavillion dv5
Operating System: Windows 7 64-bit
Problem: Smart Hard Disk Error
Disk Name: WDC WD3200BEKT-60V5T1
How do I fix this error?Hi,
If you're starting to get Smart warnings, it's probably best to think about replacing the Hard Drive - at the very least, make sure you have a current back-up of all your personal files etc in case the drive fails suddenly.
If you'd like a guide on replacing the Hard Drive, please post back with the full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
SMART Hard Disk Error after replacing HD
Hi!
I SOOO hope that someboidy is able to help me.
I am NOT a novice but I am stumped.
I replaced the HD with the same model HD that the COMPAQ CQ58 came with because the old HD was shot - how that happend eludes me.
Anyhoo, after screwing a new HD in I wanted to put OS on it but I get the following error right after pushing gthe power button on:
SMART Hard Disk Error
The SMART hard disk check has detected an imminent failure. To ensure not data los, please backup the content immediately and run Hard Disk Test in System Diagnostics.
Hard Disk 1 (301)
F2 System Diagnostics
ENTER - Coninue Startup
For more information, please visit: www.hp.com/go/techcenter/startup
I'll get back to the LINK later.
First I pushed ENTER. What appeared is:
Boot Device Not Found
Please install an operating system on your hard disk
Hard Disk (3FO)
F2 System Diagnostics
For more information, please visit: www.hp.com/go/techcenter/startup
I pressed F2 and this is what happens:
I get the diagnostics Menu.
Version 1.6.0.0 - BIOS
For more information, please visit: www.hp.com/go/techcenter/PCDiags
Memory Test
Hard Drive Check
Language
Exit
I pressed Hard Drive Test did the "Quick Check" and this is the message I get:
SMART Check : NOT AVAILABLE
Short DST : NOT AVAILABLE
==============================
For more information, please visit: www.hp.com/go/techcenter/PCDiags
I tried the LINK, it doesn't exist.
I also went to the Boot Options in BIOS in order to start from a USB stick and put the USB HD in first place.
When I reboot it does not recognise any USB stick. I tried Windows 8 and UBUNTU which ususally works on all machines I recoverd so far.
No whatsoever luck.
As I mentioned before:
I am stumped.
I have no recovery CDs and can't make one since I don't run Win8 on any of my PCs.
So, any suggestions????
Please HELP
Thank you in advance
Kai Henry
This question was solved.
View Solution.Plug the usb flashdrive into one of the notebooks's usb ports Press the power button and then immediately tap the Esc key to invoke the startup menu. Choose F9 (boot opions) instead of F10 (BIOS setup) in the startup menu and then select the usb flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Smart Hard Disk Error on windows 7 notebook
I have a Hp Mini 2100-2190NR running windows 7.
I've had a problem recently where i could not boot windows. I got it fixed using a USB recovery disk.
When i start my computer i get a Smart Hard Disk Error message.
It says it has detected an imminent failure and to back up the content immediately and run the hard disk test in system diagnostics.
Once i run the tests, some got me errors and could not complete them.
I tried using a system restore back to a date and i was able to log into windows. The next day same problem occured and tried another system restore and nothing happened.
Im stuck at the black screen with the microsoft corporation loading bar.
How can i fix this problem?
This question was solved.
View Solution.Hi,
The Smart error message would indicate that the Hard Drive is failing and needs to be replaced. This is also consistent with the start-up issue.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced - you can check your warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
HP G62 Notebook has Smart Hard disk error
My HP G62 Notebook PC just stopped in the middle of my doing homework the other day and came up with an error code on the screen. I have went in through the BIOS and ran a hard disk test. It passes the first 2 tests and then fails on the third one.
I have tried to back it up over a month, just in case it was a virus but that doesn't seem to make a difference. Now upon start up it says the following:
"SMART Hard Disk Error
The SMART Hard disk check has detected an imminent failure. To ensure not data loss, please backup the content immediatly and run the Hard Disk Test in System Diagnostics.
Hard Disk 1 (301)"
Does this mean my computer is done? Do I need a new hard drive? I'm definetly not the most tech savvy person. I did see another board where they suggested removing the hard drive and then reinstalling it. This doesn't seem to make a difference. HELP!!Hi,
The Smart error would indicate that the Hard Drive is failing and needs to be replaced.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced - you can check your warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know - include the full Model No. and Product No. of your G62 series notebook - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
HP Pavilion dv7-4165dx SMART Hard Disk Error Hard Disk 1 (301)
My HP Pavilion dv7-4165dx when first turned, the screen reads "SMART Hard Disk Error" "Hard Disk 1 (301)
blackeneds
Your System supported HDD to 1 TB Page 2 , 55 and 107http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
Sata III works
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. -
HP DV6 Laptop - Smart Hard disk error
1. Product Name: HP Pavilion DV6-3150 us
2. Operating System - Windows 7
3. Error message: Smart Hard disk error
4. Any changes made to your system before the issue occurred:
Hi
My laptop was toooooo slow and looks like some process was running
in the background especially lots of scvhost.exe. Tried some
malware removal and couldn't resolve it.
Now I'm not able to login to my system at all.
I have tried all possible options
a. Tried to run scandisk
b. Tried to start OS in safemode prompt(It stops at classpnp.sys)
c. Tried to start OS in safemode with netword
d. Command prompt
e. Tried to execute chkdsk, scandsk etc etc.
None of the options able to solve the problem. It keeps on giving me a message"Smart hard disk error" and sometimes it runs the scandisk and it keeps on gives me a message for each segment "File record segment 12345 is unreadable"
Don't know what to do. After reading many posts in the net, suggestions were to replace the hard drive I am worried about it.
It is just 1 year and 2 months I bought the laptop and now I dont have warranty as well. Dont know what to do.
Is there any way I can resolve my hard drive?
Can you help me out to resolve it?
Regards
BalsI have seen several people report Recovery hanging and not completing when the hdd is smaller than the original. Years ago when hdds were 20-40gb I could understand the problem with running Recovery from disks on a 20gb if the machine came with a 40gb_but I would have thought /hoped that HP would have eliminated that issue with todays huge hdds.From several posts here in the forum, the problem has not gone away.
If you install Linux now booting from Recovery Disks will wipe out Linux,so if you hope to dual-boot it will have to be reinstalled after recovering windows 7.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
How to install the second hard disk (HP ProBook 6560b LG658EA) ?
How to install the second hard disk (HP ProBook 6560b LG658EA) ?
Hi,
You can install a second HDD in the Upgrade Bay - this is detailed on Page 67 of your Maintenance & Service Guide.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
HP Pavilion 15 Notebook PC : smart hard disk error, erro (301)
product name: HP Pavilion 15 Notebook PC Number product: E6N13EA#ABZ Op: windows 8.1
hi!
sometimes when i turn on my laptop , it appears " smart hard disk error. The smart hard disk check has detected an imminent failure. To ensure not data loss, please backup the content immediately and run the hard disk test in system diagnostic. Hard disk error (301) "
what does hard disk error (301) mean?
i did all dyagnostics tests and the pc didn't notice any problem. what should i do?Hi max40,
A hdd error 301 is a error there will come if you harddrive is dying or are dead. I will recommend you to get a backup of your data asap before it totally dead and fet the HDD replaced. If you are under warranty(check here) contact HP support and get them to help you with a new HDD. If you are out of warranty I will recommend you to buy a new HDD and replace it with the old one.
Best regards
Zincas
I work on behalf of HP -
SMART Hard Disk Error - Replace Hard Drive?
A couple of days ago I recieved an error when I started my computer (HP Pavilion dv6-6071eo), saying "SMART Hard Disk Error" followed by a message telling me that the SMART hard disk check has detected and imminent failure. It told me to backup my files and then press F2 and run a hard disk test. On the last row it displayed "Hard Disk 1 (301)". I tried to run the hard disk test, which failed instantly. I also ran the BIOS hard disk test. It passed the short test without problems and then stopped rather shortly after the long test started with the error "Hard Disk 1 Full 305". My computer has also been running slowly over the last week. From what I've read so far it seems I have to replace my Hard Drive. Is this correct? If yes, would this be a suitable (functional) replacement: http://www.dustinhome.se/product/5010151237/western-digital-black-2-5-320gb-7200rpm-sata-300-16mb/#intcmp=searchProvider_dacsa. Also, would it be worth it (and possible) upgrading to an SSD for noise and heat reduction, which is a problem with this laptop (and several other simular laptops from HP) compared to other laptops. Also, it might be good to mention my warranty has expired.
Have you checked to see if there is any free space left on the hard drive? A full hard drive will make the system run very slowly and it can also keep the system from working properly if it is full enough. The fact that you pass the short test means there is nothing major mechanically wrong with the drive. Just right click on the icon for the main drive likely C:\ in "Computer: and select "properties". If the drive is not actually full then I suggest replacing it. Yes, if you can afford an SSD there is no question that is the way to go. There is nothing not good about an ssd other than an occasional struggle to install it. I have been using ssds for a while and I have never had the installation problems we often see reported here but don't be dissuaded, we are here to help .
-
How do I fix Smart Hard Dtive Disk Error WDC WD3200BEKT 60V5T1
Hi,
If you're starting to get Smart warnings, it's probably best to think about replacing the Hard Drive - at the very least, make sure you have a current back-up of all your personal files etc in case the drive fails suddenly.
If you'd like a guide on replacing the Hard Drive, please post back with the full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I've run the hard disk test and is says hard disk 1 failed. tried system restore twice comes up with same error. What are my options. I do not have a recovery disc
Hi,
You may well need to replace the Hard Drive.
Is your notebook still under warranty?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
How to solve the "Method invocation failed" error in script?
Hello,
I'm trying to modify the script that enumerates all the txt (csv) files on folder and deletes empty columns, but with no luck. The script is working when I execute it on single csv file. But when I put script on loop, it generates errors:
Method invocation failed because [System.Management.Automation.PSCustomObject] does not contain a method named 'split'.
At C:\scripts\populate.ps1:25 char:1
+ $b = $line.split(",")
+ ~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (split:String) [], RuntimeException
+ FullyQualifiedErrorId : MethodNotFound
The script looks the following:
$files = Get-ChildItem C:\scripts\Results\csv\* -include *.txt
#Process files by performing a search and replace
foreach ($infile in $files)
$infilen = 'C:\scripts\Results\csv\'+[io.path]::GetFileName($infile)
$infile = import-csv $infilen
##remove blank coloumns##
$cStore = @() # array to store used column numbers
$rNumber = 0
foreach ($line in $infile)
if ($rNumber -eq 0)
{# ignore header
else
$b = $line.split(",")
$fieldNum = 0
foreach ($field in $b)
if ($field -ne '')
if ($cStore -notcontains $fieldNum) {$cStore += $fieldNum}
$fieldNum += 1
$rNumber +=1
# array $cStore now contains column numbers with values
$cStore = $cStore | sort
foreach ($line in $infile)
$nLine = ""
$c = $line.split(",")
foreach ($ar in $cStore)
$nLine += $c[$ar]+","
# remove trailing ,
$nLine = $nLine.Substring(0, $nLine.Length-1)
$fnFriendly = [io.path]::GetFileNameWithoutExtension($infile)
$result=$fnFriendly+'cl.txt'
Write-Output $nLine >> $result
Also I have found the explanation on this error on this
link but it seems this is not the case. Can you help to solve this?
Thanks!You are importing a CSV file which implies that you are creating an object (pscustomobject) and each item in that object is represented by $line. The issue is that this $line has multiple properties (for each column of the CSV) that you need to decide
on which one to split:
$c = $line.propertyname.split(",")
I'm not sure, but it seems that if you are trying to split by a comma, then maybe you are assuming that you did something similar to a
get-content on the file in which the original approach that you have done would work.
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book
Maybe you are looking for
-
How to return all field names in a table
How do you write a report to return all field names in a table? I prefer the field names in a column. Thanks Wayne
-
TS3276 Lost messages in the sent messages folder?
Has anyone lost mobileme (icloud) messages in the sent messages folder?
-
Locking the default options for IMPORT
Could we have a more definitive way to establish personal defaults for IMPORT. When I import from my camera card, I normally start in the Folder sub-panel of Library and do a right-click "Create a new folder inside ..." and then after that is complet
-
ActiveX Control recording but not playing back in a VS 2012 Web Performance Test
I am testing an application that loads an Active X control for entering some login information. While recording, this control works fine and I am able to enter information and it is recorded. However on playback in the playback window it has the erro
-
My mac wont recognize my ipod !
When I plug my ipod into my Macbook, neither the ipod or the macbook recognize that the ipod is plugged in. i checked to make sure that the ipod was plugged in all the way and it keeps saying "Connect to your computer. Use itunes to restore." and its