How to solve the very slow speed problem for iphoto 8.0.4?

after i update to 8.0.4, the speed is still very slow which is very annoying, 8.0.2 haven't this problem, i am very regret to update this....
so anyone know to solve this. the solution is very important for me coz i want to prepare a photo album to my friends for their wedding.
thanks
Message was edited by: AntonyMack

AntonyMack wrote:
after i update to 8.0.4, the speed is still very slow which is very annoying, 8.0.2 haven't this problem, i am very regret to update this....
so anyone know to solve this. the solution is very important for me coz i want to prepare a photo album to my friends for their wedding.
thanks
Message was edited by: AntonyMack
It seems that something went very wrong starting with the 8.0.3 update, there are numerous threads about this. Make sure to report this to Apple via http://www.apple.com/feedback/iphoto.html

Similar Messages

How to solve the too slow reponse of gmail on ios 6 running iPad?

I got the very slow response problem of mail program of ios6 while using GMAIL.
Also i met the problem too slow response of Safari whlie using Google search engine.

It sounds more like the type of problem caused by "throttling" which might happen because of google's download limits, or local network problems.
But there are other potential causes.
1. What folders are downloading? (see the activity in Tools | activity manager)
2. Is the gmail account set up as imap? or pop?
3. what antivirus software are you running?

How to solve the auto word break problem in Arabic language Flex project

Hi, I'm using Flex SDK 3.5 to develop a game in Arabic. Now I have a problem with the auto word break on the TextArea Control.
The output looks like this (Sorry I can't type arabic, so I use English instead)
I don't know any A
rabic text
The expected outpit should be
I don't know any
Arabic text
My settings of the textarea are fine in English version games. But just didn't work in Arabic. Any idea how to solve this problem? Thanks.

Hi Rodger,
Sorry to reopen this thread again. I was puzzled by the data format in Motion-DDK.
From the Motion-DDK, if u32, i32 and f64 data are passed to and from the controller, a specific format must be followed as below:
u32:
u32 cmddata[x] = (WORD) (u32data ?16);
cmddata[x + 1] = (u16) u32data;
i32:
i32 cmddata[x] = (WORD) (i32data ?16);
cmddata[x + 1] = (i16) i32data;
f64:
f64—big endian order cmddata[x] = ((u16) (&f64data)) [3];
cmddata[x + 1] = ((u16) (&f64data)) [2];
cmddata[x + 2] = ((u16) (&f64data)) [1];
cmddata[x + 3] = ((u16) (&f64data)) [0];
f64—little endian order cmddata[x] = ((u16) (&f64data)) [0];
cmddata[x + 1] = ((u16) (&f64data)) [1];
cmddata[x + 2] = ((u16) (&f64data)) [2];
cmddata[x + 3] = ((u16) (&f64data)) [3];
My first question: is the "?" symbol means the >> (shift operator) or something else?
The second question is: if "?" means ">>" in this list, all the u32 and i32 data are always transferred in big-endian order. Is it the only correct way to deliver the i32 and u32 data? Or I can pass the u32 and i32 either in little-order or big-order depending on my platform?
The last one: could you provide a feasible C code on how to convert the f64 data to u16?
I first followed the format in the list to convert the f64 data, but met with a lot of compiler errors in VC++. After checked with MSDN, it is said the convert process is double(f64)->long(i32)->unsigned short(u16). But the decimal part of double will be truncated during converting to long...
So, could you help me with some very simple sample code on the convert process?
Thank you for your support!
Rick
MSP

How to solve the Embed Color Profile problem...

Hi Everyone,
This vijay from Chennai. I have one doubt for rectify the Embed color Profile problem, that's is how can i judges whether the file had Embed Color Profile or not. anyone solve this problem.
Thanks in Advance.
-yajiv

I used another profiles name, because I dont have the old one installed anymore, Youll have to be exact about the letters though.
And from a prepress-standpoint Id like to point out that removing the profile as opposed to »Convert to Profile« seems a peculiar practice, though of course Your reasons for doing so may be valid indeed.
You could try:
var myDocument = app.activeDocument;
if (myDocument.colorProfileName == "U.S. Web Coated (SWOP) v2") {
// =======================================================
var idassignProfile = stringIDToTypeID( "assignProfile" );
var desc2 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
var ref1 = new ActionReference();
var idDcmn = charIDToTypeID( "Dcmn" );
var idOrdn = charIDToTypeID( "Ordn" );
var idTrgt = charIDToTypeID( "Trgt" );
ref1.putEnumerated( idDcmn, idOrdn, idTrgt );
desc2.putReference( idnull, ref1 );
var idmanage = stringIDToTypeID( "manage" );
desc2.putBoolean( idmanage, false );
executeAction( idassignProfile, desc2, DialogModes.NO );
else {

How to solve the Cannot find oraInventory problem in R12 installation.

I search many places to find this so, i decided to shared for hopl anyone else.
The note Rw-10003 During Rapidwiz Upgrade Install [ID 1266385.1] tell how to solved, crating the oraInst.loc file, but it miss something important, where I have to put it in the oraInst.loc file ? Fortunately, i have accses to others DB where look. You have to cretate the file in the /etc directory. Follows this steps.
1.- Go to the main directory where you gonna install the R12 app and create the follow directory
oraInventory
in my case was /u01/hab_r12/oraInventory
2.- Go to /etc and create a text file with the name OraInst.loc and put this lines
inventory_loc=/u01/hab_r12/oraInventory*
inst_group=dba**
*you must put the root directory of the installation
** the group who have the privilege in DB
3.- Re run the rapidinstall.
I hope this can help someone.
Cheers.

Hi;
In addition to Hussein Sawwan great post, Please refer:
R12 Insllation Fails With Error "Cannot Find Orainventory" [ID 1281649.1]
How to Create a Clean oraInventory in Release 12 [ID 834894.1]
How to find the location of GLOBAL Inventory and LOCAL inventory on R12.x ? Why Some Times, There are Issues With The oraInventory Registration During The Post Clone ? [ID 878717.1]
Regard

How to solve the mail box size limit for thunderbird

Hi,
I tried to do archiving for my mails but everytime it will prompt me mail box size limit has reached and ask me to delete older mails and the problem is my HDD is more than enough to contain those archives so am asking if there's anything which i can get this solved for good?
Regards.
Andrew Koh

Background info:
Emails are downloaded and stored in the Inbox file written one after the other.; they are not stored as individual emails in their own file. So the Inbox folder in the FolderPane is actually a file.
Any email you delete is marked as deleted and from your point of view it disappears from eg: Inbox and reappears in 'Deleted' folder. In reality it is still in the Inbox taking up space, marked as deleted and hidden from view. Compacting removes all traces of 'marked as deleted' emails and reduces the file size. If a file becomes corrupted and you compact that file you may lose good emails. this can occur if you do not compact on a regular basis.
It is wise to create a backup on a regular basis.
* http://kb.mozillazine.org/Profile_backup
'''RE: Archiving'''
Archiving is not a backup. It is a means of storing old emails in smaller files accessible within your Profile mail account. So releasing space in other folders.
If you have been archiving all emails into just one Archives folder, then you are putting all of your emails into one file.
Did you set up Archive Options?
See info at these links:
* https://support.mozilla.org/en-US/kb/archived-messages
* http://kb.mozillazine.org/Archiving_your_e-mail
Did you choose to archive by month and retain folder structure?
By using these options, if you archived last months Sent emails and say you had another folder called 'Family' and you did the same, they would be stored as follows into smaller files, so you should not reach a mailbox limit.
There will be no emails stored in the actual 'Archives' folder, nor the '2014' or '2014-5' folders, they will be in the relevant folder name - see below
eg:
> Archives
>->2014
>->->2014-05
>->->->Family (one month of emails here)
>->->-> Sent (one month of emails here)
Suggest you do the following and in this order:
* create a backup
* delete any emails not required
* compact folders
* set up Archive options and organise emails as shown above, so that emails are only in that months eg: Sent archive Folder.
* Create another backup when everything is organised.

K9N2 Sli Platinum + SSD OCZ Vertex 3 = Slow Speed Problem [PARTIALLY SOLVED]

Hey folks,
I have a problem with my new SSD. I only get sequential reads of 140MB/s and writes of 114MB/s.
I think it is a driver related issue. I once got faster SATA2-like speeds but cannot reproduce the system settings again... Everything back to SATA1-like speeds after reboot.
First my pc specs:
MSI K9N2 Sli Platinum, BIOS v3.9
- 6 SATAII ports by nForce 750a SLI
- 2 ESATA (External-SATA) ports (back panel) by JMB363
- Supports storage and data transfers at up to 3 Gb/s
AMD Phenom II 965 Black
Patriot PV224G8500ELKB Viper II Series DDR2 4GB (2 x 2GB, CL5 PC-8500/1066MHz)
SSD SATAIII OCZ Vertex 3, 120GB, FW v2.11
LG Internal BlueRay BH10LS30
Windows 7 Ultimate x64
I only get very slow speeds with the SSD. I tried so many things that I am getting very frustrated now, I am even thinking about getting a new board and ram just to get the SSD up to speed...
1)
I installed Win7 first with all the default settings in Windows Setup from DVD. Default "IDE ATA/ATAPI controllers" driver was "Standard AHCI1.0 Serial ATA Controller".
SSD was connected to SATA1-port, On-Chip Sata Controller AHCI enabled in BIOS, Extra RAID/IDE Controller disabled.
All fine, but whichever benchmark I used (AS SSD, HD Tune Pro, Atto Disk Benchmark, CrystalDiskMark; other tools used: DriveControllerInfo, AIDA64/Everest, CrystalDiskInfo ) I got e.g. 140MB/s Read and 114MB/s Write sequentially (CrystalDiskmark, similar with random data AND only zeros ).
Trim working (it seems) with AHCI driver. I also changed to nvstor64 driver (nforce driver setup 15.56), with is marginally faster but not what you would expect from a SATAIII drive on SATAII controller.
2)
I installed Win7 using "diskpart" (Shift-F10) during disk setup, setting a cluster size of 64k instead of default. No real change.
3)
After reinstall of Win7 x64 (again...), I changed from SATA1 port to SATA6 port, also enabled Extra Raid/IDE controller set to AHCI as well.
Nothing changed. With all settings to default in Windows (ahci default driver), I then manually updated the ahci to nvstore64 driver in Device Management, rebooted.
Then a minute later after reboot I got the following Sequential speeds with CrystalDiskMark:
273MB/s read and 137MB/s write (random data) + 274MB/s read and 220MB/s write (with zeros) !!!
While I ran this benchmark Windows came up with a message: "You must restart your computer to apply these changes - Restart Now/Restart Later".
After the previos reboot, when I changed manually from AHCI to NVSTORE, I had changed nothing in the current session, apart from running CrystalDiskMark.
I did reboot and I was back to the slow SSD speeds again = 140/114 MB/s...
4)
I have tried every possible combination of mainboard SATA ports, drivers changing with nvidia setup/manually, deleting and disabling controllers (incl BSOD and startup repair :D ), chaning bios settings around, but I just cannot get back the faster speeds
There is never any change in speed, whether I use ahci or nvstore64, whichever benchmark I use, whether random or zeros...
5)
Could the SSD be broken, something internally preventing it from faster speeds (with this one random exception)?
Could it be that my K9N2 SataPorts only allows for / reduced to SATA1 speeds?
Am I missing something with the driver setup?
Do I need additional drivers for the extra JMicron Controller when using SataPorts 5/6 ?
I have no other mainboard to test this with...
Please guys, I am going to jump out of the window if I can't fix it... :(
Thanks, Mike

Hey guys - problem 'solved':
I tested the OCZ SSD Vertex 3 120GB with following sata3 controller card http://www.lycom.com.tw/PE-115H.htm.
The card itself works immediately (needs at least PCIe x4 slot, will work slower otherwise but still faster than the OCZ SSD @sata1 with nvidia chipset).
There is some raid setup, doesn't apply to me, the boot even with the card is really only a few seconds longer and not annoying at all. Windows (7 x64) needed a driver, supplied on CD (which is cheap and making noise like h**l). The card works w/o the driver but doesn't harm to install it...
Also, just to clarify, this sata controller card did not need any specific setup at all. Just put it in, plug in sata cable (I use akasa sata3-rated), maybe change boot device in BIOS (I didn't even have to), done - booting Windows as usual.
Benchmark CDM with sata controller card Lycom PE-115H:
http://img24.imageshack.us/img24/3845/cdmpe115hahci0x00.png
http://img850.imageshack.us/img850/7549/cdmpe115hahcirand.png
Speed is much better than before with nvidia chipset 750a SLI controller: sata1 (sata2 whenever it randomly worked):
http://img839.imageshack.us/img839/505/cdmahci0x0.png
http://img13.imageshack.us/img13/6258/cdmahci0x0sata6contnv64.png
Final thoughts:
Well, I am happy with the SSD speed now (PCIe limited to 5Gbps). However, I had to spent quite some time to get it working on my sata2-cabable mainboard. Finally, I had to buy a extra controller card to get it working reliably at speeds faster than sata1. There is hardly any useful information on why this problem occurs with (older) nvidia chipsets and OCZ (sata3) SSDs. I still think that OCZ must know about this problem, but regards this issue as low priority, while at the same time not planning on giving up on sales to people with nvidia chipsets. Maybe OCZ should just make a big sticker on the box the drives come in with something like "Does/Might not work with nvidia chipsets, please use third-party sata controller card or different SSD manufacturer". But then none of these potential customers would buy OCZ SSDs...
I will keep the sata3 controller, anyway handy to have, but return the OCZ Vertex 3 120GB and replace it with a SSD from a different manufacturer (Corsair Force GT, Patriot and OWC are not that great to get around here). The benchmarks for most people will not achieve the maximum advertised OCZ speeds anyway, so why not go with a brand that allows for some plug'n'play with some customer support.
Hope this post helps others like me with their nvidia chipset + sata1 speed problem
Cheers, Mike

I have the following Imac and Iphoto 11 in Finder folder I upgrade the iphoto file and all the latest event files, can you help how to solve the problem? Thank you Model Name iMac    Model Identifier:     iMa

I have the following Imac and Iphoto 11 in Finder folder I upgrade the iphoto file and I lost all the latest event files, can you help how to solve the problem? Thank you
Model Name:     iMac
Model Identifier:     iMac8,1   Processor Name:     Intel Core 2 Duo
Processor Speed:     2.4 GHz

http://support.apple.com/kb/HT2638?viewlocale=en_US&locale=en_US

Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones and it never worked. Does anyone has an idea how to solve the problem? Tks.

Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones but it never worked. Does anyone has an idea how to solve the problem? Tks.

This is not a feature of iPhone, iPad or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the
app store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording)

How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help please

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

You're not speaking to Apple on in this forum, nor will someone from Apple see this post. We are just users like you and I.
Have you tried to restore or reset your phone?
Or contact your carrier in re: to your sim card

I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report:          8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
      Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE            1
com.intego.iokit.BehavioralKext            1
com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
com.intego.kext.VirusBarrierKPI            10.6.8
com.globaldelight.driver.BoomDevice            1.1
com.huawei.driver.HuaweiDataCardACMData            4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE            1
com.intego.iokit.BehavioralKext            1
com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
com.intego.kext.VirusBarrierKPI            10.6.8
com.globaldelight.driver.BoomDevice            1.1
com.huawei.driver.HuaweiDataCardACMData            4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker.

I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

Hi Jboudet,
Welcome to Apple Support Communities.
You can find some suggestions for troubleshooting your iPhone at these links:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Have a good one,
Jeremy

How to solve the problem of connecting my iPad to Itunes while my iPad not working and show to connect to iTunes?

Question to all iPad users please help in this issue
How to solve the problem of connecting my iPad to Itunes while my iPad not working and show to connect to iTunes?
Thank you for help out.

Hi Jamalzoal,
Dose your computer have the most recent iTunes on it? When you connect the iPad 2 to your computer what happens? dose iTunes tell you the iPad need to be restored?
p.s. you post this question in the Apple Remote Desktop community. You would probable have gotten more an fast responses if you posted this in the iPad community.

How can solve the problem in email " SMTP Relay "Message rejected" ", how can solve the problem in email " SMTP Relay "Message rejected" "

Dear sirs,
how to solve the mail problem which occurs while I am abroad; bearing in mind that I use HOTSPOT and sometime it's sending emails sometime getting the below messages " SMTP Relay "Message rejected"

The outgoing mail server is rejecting mail from your network address. Typically that happens when your mail service provider is also your ISP, and you connect to it from another network. The SMTP server will allow connections without a password from anywhere, but it will only relay mail from within the ISP's network. It could also be that your account on the server has expired or been suspended.
If you need to send mail from outside your ISP's network, use an independent mail service provider. I don't have a specific recommendation.

How to solve the very slow speed problem for iphoto 8.0.4?

Similar Messages

Maybe you are looking for