How to solve this problem, pls help when I try to see remote camera system from home."Dual streaming is required for HTML viewing"
How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"
I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
So far the problem with the 64 bit side of it is still to be resolved.
Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
Craig
Similar Messages
-
Hi my iphone 4 is disabled how can solve this problem? help me please
hi my iphone 4 is disabled how can solve this problem? help me please
What do you mean by "disabled"? Disabled by entering the wrong passcode? If so, you'll have to force the phone into recovery mode & restore it to get it working again & remove the passcode:
Turn your phone off, then force it into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. -
how to solve this problem? '' can not activate cellular data network failure'' authenticating PDP from already thank you
What does this have to do with using an iPhone in an enterprise environment?
What carrier are you using and where did you get the phone? -
Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.
Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore. -
how do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls
Welcome to Apple Support Communities
When you try to copy data to the external drive, what happens? If you don't see any error, the external drive is formatted in NTFS, and OS X can't write in it.
To be able to write on this external drive, you have to use an app like Paragon NTFS. Another solution would be to format the external drive in FAT32 or exFAT with Disk Utility > http://pondini.org/OSX/DU1.html Make sure you copied all the files of the external disk to the internal disk before doing it -
My Iphone 4s reciever is not working properly, when i call someone from my iphone 4s. can any one help me how to solve this problem?
You might like to define "not working properly".
-
Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me
Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
I Try to open an Indesign document. The message: it is made in a newer version. Go tot CC: Help/Give your Adobe id/Start Indesign again and try to open the document. This doesn’t work. How to solve this problem?
What version are you running?
What version was it made with? -
Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!
Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help. -
I have a problem in my iphone 4 with wi-fi after update to IOS6 please can help my how can solve this problem?
Nope
One needs to press the home and sleep / wake keys together for the phone to reset
The other thing I could recommend
Let the battery run out and the phone completely "die"
It may take a day or two with it not being used
Then plug it in to charge and see if there is any change in behavior
If you cannot get this to work - you may need to bring it to an Apple store -
When i go to new sms typing their is always show a text, how can solve this problem?
when i go to new sms typing their is always show a text, how can solve this problem?
Delete them and then download them from the desired Apple ID. This may require repurchasing paid applications.
(95675) -
when i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place it did before i turned the engine off
It could be that the CD player will only playback "Redbook" CD's from the previous position.
And starts mp3 type CD's from the beginnig.
However.. it's not Logic related.
pancenter- -
Hello
THIS IS RAZA
I GOT A MACBOOK PRO
I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanksThis is a scam. Do not phone these people, at best they will charge you for unnecessary 'cleaning' and at worst they will gain access to your Mac and steal your data. You've probably managed to install some 'adware' which is producing this fake warning. 'Adwaremedic' should remove it and is safe to use - please see
http://www.adwaremedic.com/index.php -
how to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?
how to restore:
http://support.apple.com/kb/HT1414
error code 21 fix
http://support.apple.com/kb/TS3694#error1015 -
I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
I saw the below quote on Adobe forum
"You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
If possible please send the advise to my mail id: <Removed by Moderator>
Thanks
Uvaraj SI already answered that. If you purchased a Suite then you can only install and activate it on two machines. Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite. You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time. If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again. I do not remember if there is a limit to the total number of activations you can process for the life of the software.
Maybe you are looking for
-
Disabling LaserJet 100 color MFP M175nw as a wireless hotspot
Hello Bought HP LaserJet 100 color MFP M175nw. It announces ( broadcasts) its wireless network HP-Print-74-LaserJet100. Which interferes with my other wireless network, and makes quality of signal lower. Is it possible to disable wireless hotspot fea
-
I have a Performa 6400/200 running Mac OS 9.1. I have installed two 64 MB 2k refresh rate RAM modules. The Mac now refuses to boot with them installed. I have already replaced the PRAM battery & pressed the CUDA reset button on the logic board. The M
-
Migration or Deployment from one server to another server!
Hi All, We have a new Business Objects XI R2 SP1 production server installed in a remote location, and my client wants to migrate everything from the old BO Production server to the new server.Is there any way to do? Initially I tried using Import wi
-
UJR_WRITE_BACK: disaggregation based on previous yearu2019s data
Hi Guys, We implement a UJR_WRITE_BACK that performs correctly the evenly disaggregation on two dimensions (product and time). We have to implement the disaggregation based on previous yearu2019s data mentioned in the How-To u201CHow To... Use the Wr
-
Registration of Oracle 10 i recieved with a textbook won't work
I'm trying to register with oracle to get a registration key so i can install the software, but i keep getting this page " We're sorry. An unexpected exception has occurred when contacting Database. Cannot proceed further. You can change or re-visit