How to solve "unidentify network"?

Hi,
I need to set up a server with no access to the internet. It is connected to an internal LAN. I'm having problem where the network is detected as "unidentify network". What services should I install on the server to solve this? I do not want to install AD as the server is a Terminal Service server.
Thanks in advance.

Hi Programatix,
What's your Windows Server 2008 version? Is it R2?
If it's not R2. Windows Server 2008 only has one network profile per machine for both of your NICs.
It seems that the NIC B is connected to a network which does not have a gateway device. You can try the following steps to add the DG.
a)     Go to Control Panel >> Network and Internet >> Network and Sharing Center
b)    Click 'View Status' next to the connection name.
c)     Clicks the 'Properties' button at the bottom.
d)    Highlight 'Internet Protocol Version 4 (TCP/IPv4)' and clicks 'Properties'
e)     In the properties dialog click 'Advanced'
f)     Under 'Default gateways' there will probably be a entry for '0.0.0.0'. Remove this entry. Add the correct Default Gateway here.
g)    'OK' out of all the property dialogs until you are at the 'Network and Sharing Center' again. The adapter will attempt to reconnect again.
If the NLA still detect the “unidentified network”, it would not decrease your network security as an "unidentified network" network will apply the Public network profile and the Public firewall profile. However you can change the network profile to public via yourself.

Similar Messages

How to solve siri network problem on iphone 4s

can anyone of you know how the sovle the network problem of siri of iphone 4s ?

Please search the forums before posting. The issue of flash has been beaten into submission many time here.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and Network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.

Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.

How to solve this problem? '' can not activate cellular data network failure'' authenticating PDP from already thank you

how to solve this problem? '' can not activate cellular data network failure'' authenticating PDP from already thank you

What does this have to do with using an iPhone in an enterprise environment?
What carrier are you using and where did you get the phone?

I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?

I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?

If you have a data only plan for the iPad with your carrier, if no change after powering your iPad off and on you will need to contact your carrier.

Hi im new apple user ..Bought a mac 3 weeks before my mac does not show serial number on screen .Also I am unable to sign in imessage n facetime it gives network error like .! What can be this issue n how to solve it??

hi im new apple ,ac book pro user ..Bought a mac 3 weeks before my mac does not show serial number on screen .Also I am unable to sign in imessage n facetime it gives network error like though i can access web site n etc .! What can be this issue n how to solve it??

Hi,
If the machine is brand new I don't see why the serial Number is missing (it is entered on to a special chip at the factory)
However if the machine is a return and has been refurbished then the Logic/mother board may have been changed and someone forgot to put the info back to the new board.
for the Points
7:44 pm Thursday; January 16, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HT4628 my mac would connect to the wifi network, but shows wifi has already stationed ip address.. how to solve this?

mac conects to the wifi , but shows internet cannot be accesedd because it already has stationed ip address or something similar...
how to solve this issue

Hello znk212
Start with creating a new network location and then try to connect to your network. Also check the settings of your router to ensure a proper connection.
OS X Mavericks: Add a network location
http://support.apple.com/kb/PH13788
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Regards,
-Norm G.

Unidentified network will kill me

hi every one
i had major problem with this thing
we have file server which is a member server with windows server 2012 in a domain with domain controller being installed windows server 2012.
the file server always give me unidentified network and i tried every solution i read about . disabling unused lan ports,run the command "netsh int ip reset" or some thing, but when ever the server reboot the same problem occur again . i need a
solution with out playing with firewall.
not: every time i disable or enable ipv6 in the lan the problem solved but when reboot it the problem come again.
help me please
best regard

Hi,
According to the blog below, if the two conditions are meet, you will get domain profile.
Connection Specific DNS Name matches the “HKEY_Local_Machine\Software\Microsoft\Windows\CurrentVersion\Group Policy\History\NetworkName” registry key.
Machine contact a Domain Controller via LDAP correctly.
Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles
http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
Since this is a domain member server, please check your DNS setting first. Then confirm the connectivity to DC.
About your last sentence, I wonder what indeed you did made it work. Did either disable or enable IPv6 make it work?

VISTA & WIRELESS : HOW TO SOLVE LOCAL ACCESS ONLY?

Thank you for your reading and possible answer(s),
UNABLE TO GET "LOCAL AND INTERNET ACCESS" UNDER VISTA, WHILE IT WAS POSSIBLE UNDER XP
I used to get connected "home-like" with XP to a "secondary wireless router" (SSID: Wlancomtrend - no authentication needed, no work group, signal strength: Excellent), which gets the internet signal from a "main wireless router", plugged to the DSL line (SSID: Wireless - no authenticatin needed, no work group, signal strength: Good / Low).
I am not the administrator of these routers. I used to get DNS automatically under TCPIP properties.
VISTA DOESN'T LET ME ACCESS THE INTERNET, THOUGH I MANAGE TO CONNECT TO THE SAME ROUTER
It says: "Access: local only"; and under Network and sharing center it says "unidentified network". I gess I'm a bit unfamiliar with this OS and do not master all its settings. I also marked off security essentials like Firewall under Windows security center, to prevent any possible internet access blocking. My laptop power plan is also set to "High performance".
- I suspect my ID network is not well configured. Under System properties (right click on the "My computer icon") > Computer name > network ID > Join a Domain or Workgroup: I'm trying to keep the "This is a home computer" setting, but it goes back to "This computer is part of a business network" all the time, even after reboot. How to fix this, by the way?
- Under Network and Sharing center > Customize the current connection > location type > i set it to "public".
Other factors maybe irrelevant: / Sharing discovery > Network discovery: "On" / > file sharing: "On".
I get DNS automatically under TCPIP properties (as with XP).
A couple of days ago, VISTA managed to get internet with the "main wireless router" (SSID: Wireless - no authentication needed, signal strength: Good / Low). I just tried to set ID network to "This is a home computer" and rebooted. Under the network window, I also tried to tick a network location or workgroup. This may not be important, though.
I STILL JUST GET LOCAL ACCESS ONLY WITH MY WIRELESS CONNECTION UNDER VISTA
Any help? Molta mercé / Many thanks
Also tried:
- Automatically Detect Settings checked in internet options
- Obtain an IP address automatically under TCPIP properties
- Enable DHCP
- Disable User Account Control in Security Center
- Disable most of the Vista security stuff
- Remove and set up all connections
- IPv6 off
- etc.
Google Occitan www.google.com/intl/oc/ | http://www.eurominority.org/documents/cartes/occitania.gif

Well, I have been thoroughly frustrated by this networking problem in Vista. What is so INSIDIOUS about it, is that it can happen spontaneously/periodically. When it first started happening, I could go for hours with
no problems. And then all of the sudden, it's "LOCAL ACCESS ONLY." I'd even lose my Internet connection completely, but then it would come back momentarily. Lately though, the problem got worse. It would happen every 5-10 minutes.
What really drove me nuts originally is that I had set up a new wireless router: a TP-Link TL-WR941N. Very nice and powerful. It can reach up 3 stories in a multi-story home. I have my computer up on the 3rd floor. My Internet
connection was no problem... for MONTHS. And then, all of the sudden, this "LOCAL ACCESS ONLY" problem started cropping up. My network connection would change to this, then after a few moments, go back to "LOCAL AND INTERNET".
I figured it was some kind of "momentary atmospheric problem". But no. It continued on, for days and days after it had started. Why? Why would this start happening when nothing else had changed?
Ah, but that's where I was amiss. You see, Vista gets updated frequently by the powers that be at Microsoft. And who knows what things they really do? You don't get a full report. You just keep getting "important security updates".
Well, I suspect that at some point, they introduced some changes which affect the networking capability of Vista. And so, since that point, you'll have periodic problems as I have.
Microsoft is so focused on Windows-7, that they really can't be bothered with Vista. AND... I really wonder if they leave defects like this around to give incentive for people to upgrade to Windows-7. I wouldn't put it past them.
Well, the main thing is that each person's situation is different. Some people have 3rd party software that is tripping it up (like Norton or McAfee). I think a lot of the problem depends upon the type of wireless router you're connected with
and the type of network (e.g. G vs. N). So that's why some fixes proposed solve the problem while others do nothing.
If you try any settings changes, I strongly recommend that you do them one at a time. Also, keep note of what you've applied. It is important to be able to roll back those changes if need be.
So, this was the first friendly user tip that helped me:
Over the course of several days, I made only one change at a time, then waited to see if the failure occurred again. I'm an IT networking professional so I based my decisions on my familiarity with network protocols, impact, risk, ease of
implementation and fallback positions.
These are the steps I took:
1. Installed Teracopy, which takes over the file copying function of Windows.
http://www.codesector.com/teracopy.php
2. Disabled IPv6 (Control Panel -> Network Connections -> <your connection> -> Properties)
3. Disabled Link Layer Topology Discovery Mapper and Responder (Control Panel -> Network Connections -> <your connection> -> Properties)
4. Set Power settings to high performance (Control Panel -> Power Options) and disabled the screensaver (Control Panel -> Personalization -> Screen Saver)
5. Reduced my Linksys router's MTU to 1480 (although I doubt this was part of the solution)
6. Enabled ECN with the following command "netsh interface tcp set global ecncapability=enabled" from command line (Start -> cmd)
http://technet.microsoft.com/en-us/library/bb726965.aspx
Possibly step 6 is all you really need to do. Please post if this works for you.
Well, I figured I'd give step #6 a shot. Why not? There are a few other command line settings recommended, but I decided to try it alone first:
   netsh interface tcp set global ecncapability=enabled
At first, this seemed to be the only thing I needed to do. My "LOCAL ACCESS ONLY" problem seemed to stop happening, observed over a 20 minute period. It happened again for a moment, but then Internet Access returned right away. I thought
the problem was solved... But then "LOCAL ACCESS ONLY" came back and stayed. I had to run these commands as well:
   netsh interface tcp set global autotuninglevel=disabled
   netsh interface tcp set global rss=disabled
This WORKED! I seem to sustain my Internet connection for much longer periods. LOCAL ACCESS ONLY does pop up sometimes, but it is very brief. I think it's something to do with my router going into "sleep mode" on the
connection. If I try to make a connection to a website, it comes back to life and I have Internet Access again.
LASTLY...
There is one other thing I want to mention, in case someone else reading this has the same problem.
One day after a severe storm that caused a power outage, I started getting "LOCAL ACCESS ONLY." The wireless router was there and I'd connect to it, but no Internet. I connected directly to it, hardwired, and STILL had the same problem. I
rebooted the router, the cable modem, you name it. Same problem. Being directly connected to the cable modem was fine. Did my router get fried from a power surge during the storm? It seemed perfectly fine in all other respects. I
eventually contacted the TP-LINK customer support. I learned something new... the problem was with the IP ADDRESS of the router conflicting with the cable modem.
By default, your wireless router will take IP address 192.168.1.1. In some cases, this will be a problem if the cable modem is taking the same IP address
and is finicky about the address of the wireless router. It was fine for almost 6 months... why did it become a problem all of the sudden? Bizarre. Suspicion was that the ISP changed some things (they remotely reprogram
the modems from time to time, you know). The solution? Give the wireless router a different address (e.g. 192.168.2.1). It worked!  I was able to get Internet access after that. Worked fine for several months,
too... until I started getting that periodic "LOCAL ACCESS ONLY" again. But the solution above seems to have addressed it.
Good luck to those having problems. I sure wish Microsoft would be more dedicated to its customer base. But thankfully we've got forums like this which bring people together to help solve each others problems. :-)

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

Backing up - how to solve after copying whole system - login incorrect

Hello,
I have done an script to backup the whole filesystem and restore it. I am making tests before using forever.
For Windows I use ntfsclone and it works perfect, but for ArchLinux I am doing:
I use Knoppix cd-live to manage everything. I load the script from /dev/sda4 (data partition in ntfs) and the main commands to backup and restore are:
Without doing chroot (because it is not possible)
sudo mount /dev/sda5 /media/sda5 #This is the / of ArchLinux
sudo rsync -aAXv /media/sda5/* /media/sda4/seccopy/ --exclude={/media/sda5/dev/*,/media/sda5/proc/*,/media/sda5/tmp/*,/media/sda5/run/*,/media/sda5/mnt/*,/media/sda5/media/*,/media/sda5/lost+found,/media/sda5/home/*,/media/sda5/var/lib/pacman/sync/*}
cd /media/sda4/seccopy/
sudo tar -zcvf /media/sda4/arch_copy.tar.gz ./*
To restore:
sudo mount /dev/sda5 /media/sda5
sudo rm -r /media/sda5/*
sudo tar -zxvf /media/sda4/arch_copy.tar.gz -C /media/sda5
I can check that the files are copied correctly.
I can do (and really do) the same with the home partition, same process but changing sda5 by sda6, and instead of arch_copy.tar.gz, arch_home_copy.tar.gz
When I restart to boot in the new copied system... the problem:
I go to the normal grub option for Arch Linux and I try again to put the password for ussr1, and nothing.
I type it, enter, wait some seconds and prompt me again.
I try with the root user, and its password, and the same problem. Not access to the system.
I try in tty1, and the same problem, it says:
Login incorrect
First question: How to solve this situation?
I think maybe the problem is something about /etc/passwd or /etc/shadow, and also I try to make chroot to see if it works.
If I try to do chroot from Knoppix to the ArchLinux restored, it is not possible, everything goes ok from this wiki:
https://wiki.archlinux.org/index.php/Change_Root
but fails in this:
Note: If you see the error chroot: cannot run command '/bin/bash': Exec format error, it is likely that the two architectures do not match.
I don't know what is "architectures". I installed x86_64 in ArchLinux.
Second question: Is because the Knoppix 7.0.4 (debian based) uses other? Like i686?
I see in Internet this:
http://www.cyberciti.biz/tips/recoverin … -file.html
It is not my problem, but maybe it is a way to know if is correct or not,...-
mode "recovery", edit, add to linux line after "ro single": init=/bin/bash
Ctrl+x
Logged as root automatically:
Third question: Why is not prompted the password? And illegitimate user can see everything doing this.
$ mount -rw -o remount /
$ mount -rw -o remount /home
mount: /home not mounted or bad option
In some cases useful info is found in syslog -try
dmesg | tail or so
Fourth question: Why i cannot mount the home? It is in the /dev/sda6, but for the / it didn't say anything to me. I cannot see the /home directory.
$ cat /etc/passwd
#- Has the root user and the ussr1 user
$ cat /etc/shadow
#- Has the root and ussr1 password coded.
$ passwd
Enter new UNIX password:
Retype new UNIX password:
Fifth question: Why is not prompted for the before password? (following the steps i can imagine that this doesn't work, so, is not a security problem)
$ passwd ussr1
Enter new UNIX password:
Retype new UNIX password:
$ sudo reboot:
sudo: /usr/lib/sudoers.so must be only be writable by owner
sudo: fatal error, unable to laod plugins
$ reboot
Failed to talk to init daemon.
$ exit
exit
[ 377.105707] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
[ 377.105707]
Sixth question: Why I cannot exit correctly? It also happen if I use the Arch in Live mode (and try to exit).
The only way to avoid this problem is unpluging from electrical power (not even with the power button).
I start the system again, I go to the normal grub option for Arch Linux and I try again to put the password for ussr1, and nothing.
I type it, enter, wait some seconds and prompt me again.
The same as first question: How to solve this situation?
My idea is only use Knoppix live-cd to use as backup/restore system, but if it is not possible, I would like to know how to solve.
The idea of using rsync instead of dd is because I want to save only the data, and not all the sectors (not enough space in the hard disk).
I don't mind to have to use arch linux usb installation media as it is "knoppix live-cd", the only thing I would like to use is the same media to do all the operations, because I want to teach normal users how to do it by themselves.

cfr wrote:What's the exit value when you run passwd? (man passwd will show what the exit values mean.)
value 0 -> success
cfr wrote:Have you tried changing the password to something *other* than the existing password?
tried for example with "something" for both, "root" and "ussr1"
but if I go to /etc/shadow, I see that the passwords coded for root and ussr1 are not the same, so must be coded with other things too.
cfr wrote:Have you tried creating a new user and logging in as that user?
I added another user, for example "try"
useradd -m -g users -s /bin/bash try
passwd try & echo "$?"
.. (something)
0
Ok, after just add the user, if I go to /home/ I can see some files created automatically, and if I compare those files with the files that I pasted in my ussr1 account, there are two that are missed:
.xinitrc
.xsession
xinitrc is executed by startx (so, it is because the X11..)
and..ok, xsession the same (xdm/gdm/kdm). So nothing here.
I also add "try" to the groups: lp, games, video, audio, optical, storage, scanner with:
gpasswd -a try lp
cfr wrote:Have you run pwck and grpck to check the integrity of the files? (I doubt this is the issue but it seems an easy step to do just on the off chance.)
Ok, if I do:
$ pwck; echo "$?"
0
$ pwck /etc/passwd; echo "$?"
0
$ pwck /etc/shadow; echo "$?"
invalid password file entry
delete line 'root:ahskldfhajksdfkahsjkdhf...asdkfhjashdkfjh:15795::::::'?
invalid password file entry
delete line 'bin:x:14871::::::'?
so forth..with: root, bin, daemon, mail, ftp, http, uuidd, dbus and nobody
user 'ussr1': directory '7' does not exist
user 'polkitd': directory '7' does not exist
user 'usbmux': directory '7' does not exist
user 'mysql': directory '7' does not exist
invalid password file entry
delete line 'kdm:!:15793::::::'?
invalid password file entry
delete line 'avahi:!:15793::::::'?
user 'try': directory '7' does not exist
pwck: no changes
2
$grpck /etc/group; echo "$?"
0
$grpck /etc/gshadow; echo "$?"
invalid group file entry
delete line 'root:::root'?
invalid group file entry
delete line 'root:::root'?
invalid group file entry
delete line 'root:::root'?
...so forth
with: root, bin, daemon, sys, adm, tty, disk, lp, mem, kmem, wheel, ftp, mail, uucp, log, utmp, locate, rfkill, smmsp, http, games, lock, uuidd, dbus, network, video, audio, optical, floppy, storage, scanner, power, nobody, users, systemd-journal, polkitd, usbmux, mysql, kdm, avahi
grpck: no changes
2
So, cat /etc/gshadow | wc -l = 40 lines
And grpck /etc/gshadow | wc -l = 40 lines
And the same for /etc/shadow = 16 lines and the pwck were 11 "delete line" and 5 "directory '7' does not exist"
But as we see, even the try has some error... in this case with directory '7'.
I don't understand why errors... theoretically they were copied and pasted without modifications
NOTE** Ok, my fault, I have to execute the command like this: $ pwck -r /etc/passwd /etc/shadow; echo "$?" and now it answers: 0 So, the integrity of both files are correct! And the same with group and gshadow
ewaller wrote:
Inside the chroot, run pacman -Qk | grep -v ", 0 missing"
And see if there are any packages that should be reinstalled.
If not, reinstall pam, just for good measure
With
$pacman -Qk | grep -v ", 0 missing"
no results.
I execute it without doing anything before with pacman, no updating, absolutely nothing.
pam?
i search for pam, and i find "pam mount", something like "encrypted home". But Was it activated by default?
Last edited by Zzipo (2013-03-31 21:57:57)

How to solve the delay from 'SWW_WI_ADMIN_CALLBACK'.

Hi expert,
We have a workflow in Send Notified vai SAP Express and
E-mail step that is delayed occasionally. Each time it happens, I've noticed that the log (see below) contains an entry for SWW_WI_ADMIN_CALLBACK that executes
for 10 to 15 minutes before the next step of the
workflow. This does not happen all the time, only occasionally.
Workflow System           (Sub)workflow created                        15.07.2008 10:08:12
Workflow System           Execution started automatically          15.07.2008 10:08:12
Workflow System           SWW_WI_ADMIN_CALLBACK           15.07.2008 10:20:05
I want your help about
- What's 'SWW_WI_ADMIN_CALLBACK' ?
- How to solve the problem ?
Thanks for your help.
KP.

Have either of you tried a Reset Settings yet? (Settings App -> General -> Reset -> Reset All Settings NOT Erase All Content and Settings.) You could also try just the "Reset Network Settings" first too. Resetting settings will purge your lock screen and wallpaper, and probably some other things that will be annoying for a bit (like turning back on the keyboard clicking sound,) but it seemed to help my problems.
I work on iPhone problems all day (mostly backup and restore right now), so I collect a lot of the debugging logs. I saw a lot of networking error garbage on my 5S right after upgrading from iOS7 that was vastly reduced after doing a reset all settings (I wish I would have tried just Reset Network Settings first, so I knew if that worked alone.)
If that still doesn't help, I would love to take a look at your phone debug logs (like I said, I do iPhone troubleshooting all day, so investigating and hopefully fixing a serious problem sounds exciting to me ) If you want, you can contact me through my company's webpage: http://deciphertools.com/support.html and we can start looking at what kind of errors are happening while the wifi is acting up. You can mention my name directly, Kelly, so you know the message gets to me! (This is an open invitation to anyone having serious wifi problems after the update, not just mendoSYK and tragic330.)
(Note: As I mentioned, the link I am posting is to my company's website. So, I stand to benefit, financially or otherwise, from the link I am providing.)

My iphones contact list in whats app is showing same contacts twice how to solve this problem

my iphones contact list in whats app is showing same contacts twice how to solve this problem

APPLE says:If the previous owner is not present
Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps:
Sign in to their iCloud account at www.icloud.com/find.
Select the device from their Find My iPhone device list by clicking All Devices at the top of the screen.
Erase the device by clicking the Erase button. This will erase all content and settings from the device. When prompted, do not enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
After the device has been erased and removed from the account, you can proceed with the device setup process.
i forgot to erase the phone.i just removed it without erasing.

Unidentified Network

For some reason, when I turned my computer on, I realized that I have lost my internet access. In the taskbar, rather than saying LAN connected, it said Unidentified Network -- No connection. I tried to diable the adapter and reenable it, which starts with "identifying", but later changed back to "unidentified network". Is there any wrong settings that could have caused this? Help!

#1 What is the brand and model of your router?
#2 What is the brand and model of your modem?
#3 What is your version of Windows (for example Windows XP)?
#4 What software firewall is on your computer?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Unidentified network using Hub

One of the three computers within the house will no longer connect to the internet via the Hub, the other computers are fine. The system indicates only local connection available and if you hover over the wireless connection icon, it states that it is an unidentified network. We have tried following the connection help advice to no avail. Can anyone suggest what the problem is and how we can rectify it?
Please bear in mind I am a complete computer novice and the original set up was undertaken by my ex husband, so I don't really know what I am doing!

Hi,
should be basically the same, I was looking to find out what wireless lan card you were using in the laptop with the probs and the others without.
I do not use either vista or a homehub but have a read of these pages , if might give you some ideas to check out:
http://bt.custhelp.com/app/answers/detail/a_id/11433
http://www.jarviser.co.uk/jarviser/hubtrouble.html#type1
toekneem
http://www.no2nuisancecalls.net
(EASBF)

How to solve "unidentify network"?

Similar Messages

Maybe you are looking for