How to Solve Wi-Fi or Bluetooth Problems on your iOS Device?

Do you have any problem with Wi-Fi and Bluetooth on your iOS Device? Please read these steps carefully and follow it!
These Steps that I am sharing are TESTED by 10 iOS users what had problems with Wi-Fi or Bluetooth or both and was successful
- Please note that Resetting/Factory Resetting/Hard Resetting or Recovering or un-jailbreaking your device will not work at all -
To Solve Wi-Fi Problems Follow these steps (But before doing anything please restart your iOS Device and see if you still have network problems):
Step 1 Go to Settings > General > Reset > Rest Network Settings and Reset your Network Settings and wait until your device re-boots
Step 2 Go to Settings > Wi-Fi and see if you can connect to your Wi-Fi If you can't then go to next step
Step 3 Go to Settings > Airplane Mode and turn on Airplane Mode and shut down your device. Go to your network provider and ask to restart the Modem or do it your self (Just unplug power cord and plug it back in) You have to wait 30 seconds.
Step 4 Boot your device and go to Settings > Airplane Mode and this time turn if off and go to Wi-Fi and see if you can connect it again. If you can't then go to next step - Note: If you are going on to Step 5 it means that your device is experiencing Critical System Error that cannot be fixed easily -
Step 5 Go your laptop/desktop and open your browser then type this on the webpage search bar 192.168.0.1 and click enter. If it doesn't work then go and ask your network provider for an address for your modem/internet settings.
Step 6 Change your modem/internet settings to no password and make it "available/visible for everyone" and go to your iOS device and got to Settings > Wi-Fi and see if it works this time. If it still doesn't work go to next step - Note: If you are going on to the next step it means you are experiencing Critical System Error that had been cause by glitch/bug -
Step 7 Connect your iOS Device to iTunes on your laptop/desktop and update your iOS version -Note: this process if basically re-installing your operating system- If you can't update if because the new update if not available you have to wait for next update unfortunately
Step 8 After updating your iOS Device Go to Settings > Wi-Fi and see if it connects to your Wi-Fi. It normally fixes the problem but if it still doesn't, it means your device is experiencing hardware problem. Visit your local Apple Retail Store or reseller and ask them for complimentary/device-exchange/warranty help or go to Apple website for online support: www.apple.com/support/ for better support.
To Solve Bluetooth Problem all you need to do is resetting (not factory resetting) your device and see if it works, if it doesn't you will need to update your iOS or Google for more technical troubleshooting because it could be your pairing device's problem. Visit www.apple.com/support/ for better support.
If anyone of you had these experiences and was successful troubleshooting please do share your experience. I will also be avaliable to answer your questions if you have one! Please do share your openions about my post if you have one

If you don't mind, would you do that for me please?

Similar Messages

How do you stop iMessage chats going to all your iOS devices?

When I send messages through imessage on my Mac, the chat is also sent to my sister's phone. Her phone is registered to my Apple ID, but how do I stop all my imessages going to her iphone?

Take her iPhone and follow this steps:
Settings/iMessage/Receive at/Add another email - add her email account. Then you wil see two email accounts at Receive at - tap your apple id email and just remove it. That's it.

How to solve Oracle SQL Developer connection problem ?

Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?

user8860348 wrote:
Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?username: sys
password: enter_your_correct_password given at the time of oracle installation
role: select sysdba if you would connect as sysdba else select normal for users other than sys
hostname: enter your oracle server hostname or ip address eg:- 192.168.11.12
to find the hostname open terminal/command prompt in oracle installed machine
type ---> hostname
type ---->ping hostname
you can find the ipaddress of the server
port number: 1521 (default) ----> i guess , else check the port number in the tnsnames.ora file under your ORACLE_HOME/network/admin folder
SID: DB1
try it
Good Luck

My iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

Hey there Abdulrahim0259,
I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
And:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling

How do I get the correct ICloud account on my iOS devices?

Hello. A few days ago, I changed my Apple ID username from my old email to my new one. Everything worked fine and I was able to re-login to the App Store, iMessage, etc. A few days later, I got a message from iCloud asking me to login. When I tried to login it failed and I realized that it was using my old Apple ID email to login to iCloud. So I went into accounts and tried to delete that account and add the account with the correct Apple ID. When I tried to delete the account it asked for my iCloud password to confirm, which doesn't work because it is using my old Apple ID. I then tried to add my current iCloud account without deleting the old one, but when I did it said it was already on the device. How do I get the correct ICloud account on my iOS devices?

Log out of the old ID, then login using the new one with the correct pw.

How can I get my ical to sync on all ios devices (imac, macbook, ipad, iphone)?

How can I get my ical to sync on all ios devices (imac, macbook, ipad, iphone)?

Setup iCloud on all the devices and computers as described here: http://www.apple.com/icloud/setup/

There's a problem with your audio device.

Please help. I don't know what the problem is!

i cant figure out what to do, everytime i call someone, it says "theres a problem with your audio device."

How to solve the auto word break problem in Arabic language Flex project

Hi, I'm using Flex SDK 3.5 to develop a game in Arabic. Now I have a problem with the auto word break on the TextArea Control.
The output looks like this (Sorry I can't type arabic, so I use English instead)
I don't know any A
rabic text
The expected outpit should be
I don't know any
Arabic text
My settings of the textarea are fine in English version games. But just didn't work in Arabic. Any idea how to solve this problem? Thanks.

Hi Rodger,
Sorry to reopen this thread again. I was puzzled by the data format in Motion-DDK.
From the Motion-DDK, if u32, i32 and f64 data are passed to and from the controller, a specific format must be followed as below:
u32:
u32 cmddata[x] = (WORD) (u32data ?16);
cmddata[x + 1] = (u16) u32data;
i32:
i32 cmddata[x] = (WORD) (i32data ?16);
cmddata[x + 1] = (i16) i32data;
f64:
f64—big endian order cmddata[x] = ((u16) (&f64data)) [3];
cmddata[x + 1] = ((u16) (&f64data)) [2];
cmddata[x + 2] = ((u16) (&f64data)) [1];
cmddata[x + 3] = ((u16) (&f64data)) [0];
f64—little endian order cmddata[x] = ((u16) (&f64data)) [0];
cmddata[x + 1] = ((u16) (&f64data)) [1];
cmddata[x + 2] = ((u16) (&f64data)) [2];
cmddata[x + 3] = ((u16) (&f64data)) [3];
My first question: is the "?" symbol means the >> (shift operator) or something else?
The second question is: if "?" means ">>" in this list, all the u32 and i32 data are always transferred in big-endian order. Is it the only correct way to deliver the i32 and u32 data? Or I can pass the u32 and i32 either in little-order or big-order depending on my platform?
The last one: could you provide a feasible C code on how to convert the f64 data to u16?
I first followed the format in the list to convert the f64 data, but met with a lot of compiler errors in VC++. After checked with MSDN, it is said the convert process is double(f64)->long(i32)->unsigned short(u16). But the decimal part of double will be truncated during converting to long...
So, could you help me with some very simple sample code on the convert process?
Thank you for your support!
Rick
MSP

How to solve the Cannot find oraInventory problem in R12 installation.

I search many places to find this so, i decided to shared for hopl anyone else.
The note Rw-10003 During Rapidwiz Upgrade Install [ID 1266385.1] tell how to solved, crating the oraInst.loc file, but it miss something important, where I have to put it in the oraInst.loc file ? Fortunately, i have accses to others DB where look. You have to cretate the file in the /etc directory. Follows this steps.
1.- Go to the main directory where you gonna install the R12 app and create the follow directory
oraInventory
in my case was /u01/hab_r12/oraInventory
2.- Go to /etc and create a text file with the name OraInst.loc and put this lines
inventory_loc=/u01/hab_r12/oraInventory*
inst_group=dba**
*you must put the root directory of the installation
** the group who have the privilege in DB
3.- Re run the rapidinstall.
I hope this can help someone.
Cheers.

Hi;
In addition to Hussein Sawwan great post, Please refer:
R12 Insllation Fails With Error "Cannot Find Orainventory" [ID 1281649.1]
How to Create a Clean oraInventory in Release 12 [ID 834894.1]
How to find the location of GLOBAL Inventory and LOCAL inventory on R12.x ? Why Some Times, There are Issues With The oraInventory Registration During The Post Clone ? [ID 878717.1]
Regard

Why have'nt apple sorted the bluetooth problems after the ios 6.1

Why avnt Apple sorted the problem out with bluetooth after the IOS 6.1.3 Im paying for it each month so I expect to be able to use it, their problem they should sort it!! Shouldnt they??

What bluetooth issues would you be referring to?
I have never had or known anyone with an IOS device that has bluetooth issues.
Menopausal wrote:
Why avnt Apple sorted the problem out with bluetooth after the IOS 6.1.3 Im paying for it each month
No, you simply are not. Stating such simply shows ignorance. Apple is not your wireless carrier, they are merely a hardware manufacturer.

How do you change the Apple ID associated with an iOS device?

So…I made the mistake of putting the wrong Apple ID (I have three – don't ask) on my iOS devices. If I try to change the Apple ID on my Mac, it wants to erase everything that I have on my Mac that is also stored on the iCloud. That is not a good solution. So, I want to change the Apple ID associated with my iOS devices (far less to lose there). The problem is that niether of my iOS devices will let me change the Apple ID associated with them – at least not that I can find.
Does anyone know how to do that so I can get my Mac on the same page with my iPhone/iPad?
Thanks.

This is the kind of question where it helps to know what you are trying to achieve since the way you phrased the question has several interpretations. CarolynSamit gave you one, here's another two:
Apple ID Support - http://www.apple.com/support/appleid/ -> Apple ID FAQ http://support.apple.com/kb/HE37
"How do I change my Apple ID Name or personal information?
You can change your Apple ID Name at My Apple ID. Select your country and language, enter your desired changes, then click the Continue button. Changes take effect immediately. You can also use My Apple ID to change your personal information, such as your mailing address or email address. See How to change the name you use for your Apple ID if you'd like more information."
How to change the name you use for your Apple ID - http://support.apple.com/kb/HE40
Another answer is you cannot. Items purchased with one AppleID cannot be transferred to a different account.

Video Chat Application : Problem downstream on ios device

Hi
I made real time video chat application between mobile (ios and android device with flash builder 4.7 on flex 4.6.0 and adobe air 15) and flash desktop website (flash builder 4.6, on flex 4.6.0 air 4.0). It's almost done, but there is a problem only ios device subscribe stream is very lag for the first time that video streaming start. Sometime it is stop for several time before it can be play that stream. I find the cause of it such as network, flash desktop build version, buffer (it's very smooth but there is problem when you press home button while using video chat, It's stream is gone T^T)
I have the example of downstream :
// ------------ sample code that using netstream ------------
if(subscribeNetStream == null)
subscribeNetStream = new NetStream(subscribeNetConnection);
trace("Initial for playing agent video")
subscribeNetStream.client = {onMetaData:function(obj:Object):void{}};
// display metadata
var clientMetaData:Object = new Object();
clientMetaData.onMetaData = function(info:Object):void{
trace("onMetaData");
// print debug information about the metaData
for (var propName:String in info){
trace(" "+propName + " = " + info[propName]);
subscribeNetStream.client = clientMetaData;
// trace the NetStream status information
subscribeNetStream.addEventListener(NetStatusEvent.NET_STATUS, subscribeNetStatusHandler);
// set the buffer time to zero since it is chat
subscribeNetStream.bufferTime = 0;
// subscribe to the named stream
subscribeNetStream.play("Stream_name");
// attach to the stream
if(!videoSubscriber){
videoSubscriber = new Video(uicAgent.width, uicAgent.height);
videoSubscriber.attachNetStream(subscribeNetStream);
uicAgent.addChild(videoSubscriber);
------------------- netstream/netconnection handle method ----------------------------
private function subscribeNetStatusHandler(event:NetStatusEvent):void{
trace(event.currentTarget+" : "+event.info.clientid+" : Subscribe netStatus = "+event.info.code+"\n "+event.info.description);
switch(event.info.code) {
case "NetConnection.Connect.Success":
trace("Success to play");
playStream();
break;
case "NetStream.Buffer.Empty" :
if(holdingNetStream)
holdingNetStream.seek(0);
default:
break;
// --------- End of sample code ------------------
I have no idea for solving this problem please suggest me
Thank you
Pornphop Sudpan

Check this page out for a list of apps available in a certain region on the PlayBook:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?noCount=true&externalId=KB27203&sliceId=2&cm...
As for why it would be on your old PlayBook, I've noticed that early releases included all the apps - and then that was changed. The only two ways to get around this is to either sideload the video chat app or use a proxy in another country to set up your new PlayBook.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!

How do I get additional lists in Reminder from my iOS devices to Mountain Lion?

I have on my iPhone and iPad several additional lists in Reminders beyond "Tasks." These were lists not orginally in iCloud. When I update these lists on one of the iOS devices, the other one picks it up - (whether I have iCloud on or not). On my MacBook Mountain Lion Reminders, the only list I get is just the "Tasks" list - the other ones do not show up.
How do I get ML Reminder to see these other lists? (I have iCloud turned on for all three devices)
Thanks

The operating system should read 10.8 - sorry...

How we sync call history over iCloud to all my iOS devices ? (etc, favorite, recents)

How can I sync my call history over iCloud to all my iOS devices ? (etc, favorite, recents)

I don't think that's possible.

HT204264 How do we change amount of GB stored locally on ios devices?

I'm uploading 200gb of images from my mac to the cloud. How much of this is will be ALSO stored on my iPhone and iPad? How will my ios devices decide how much to keep? Is there a local gb limit I can set? Why haven't you explained this, Apple?

Thank you for using the Apple Support Communities
Unfortunately it is impossible to change ownership of this device without having access to the previous owner's account.

How to Solve Wi-Fi or Bluetooth Problems on your iOS Device?

Similar Messages

Maybe you are looking for