How to solve worsening cs6 performance at high temperatures? (laptop)

premiere has a tendency to lag when the cpu temperature gets hot. What are some ways to effectively reduce core temperature so as to improve premiere cs6 performance?
for reference, I am running a 2011 macbook pro, maxed out 16gb ram, SSD program drive, 750gb optical bay media drive. though often, media also comes from an external via usb or f800.
my timeline is pretty typical. One or two tracks of raw mxf DVC PRO HD p2 files. a music track (from mp3 / mp4). It just sucks because once I get really plugging along - when I'm "in the zone" as it were, I am forced to compete with decreasing performance. When I'm at my most productive mentally, cs6 is at its least. Any tips?

To combat heat build up with a laptop, I always use a Zalman laptop cooler pad. The new ones have two very large fans, though I do like the older tooled aluminum units better.
I also use a little program, SpeedFan, to both monitor the temps everywhere, and control the fans in the laptop. Do not know if similar exists for a laptop.
As I am always on the patio in Arizona, I also have used the refreezable packs, and blown a regular desk fan across that to the laptop.
Good luck, and maybe others will have ideas for you, as heat is your enemy.
Hunt

Similar Messages

How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
Two things:
1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......". I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
Obviously it will fit.
What am I doing wrong, all of a sudden?

Hey ryclark,
Thanks for responding. Something else is going on here.....
Here's what I re-replied to our friend...
Thanks for the response.
When I built this computer last Nov/Dec, it was built with the second
fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's running
Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard
drive space. It is set up with 64 bit. I had been using Audition CS3 for many
years and even go back to it's origin: Cool Edit and Cool Edit Pro. My
learning curve was minimal, sans the CD burning, which I used other software
for which is now antiquated, so I need Audition for this. Between this and
IZotope 3 I've repaired and improved many a recording. All-in-all extremely
useful software.
As for the idea "to burn it anyway", well the error message comes up and
that's it - if I "X" out of that message and try to burn again the message
comes back - so Audition will not let me. It is convinced that this file is
longer than it really is, but only when I add track marks to it!
There are only 11 tracks.
I was able to burn a CD of this same file but without all the track marks,
so the same exact file length/size will burn, only as the one track.
I've also succeeded in burning other WAV's , both greater and smaller, with
and without multiple track marks, without issue. Of course all with less
than the CD's max. capacity.
This problem seems to be with this one file. I've even re-made/re-recorded
the file from scratch with no change. There's something else going on here
that I can't put my finger on. (I am "recording" LP's and making personal
CDs of them)
Also, only from time to time, I have another error after burning a CD that
states it could not verify the CD. For this I assume it is the blank rather
than AA? The first might burn without issue and with the second burn I
get the error. It is near the end of a stack of blanks, so.....
As for the need to "mark the end" of the file makes a lot of sense but of
all the other CD track-marking software I've used, none needed one to do
this, but this IS Adobe after all.
You'd think there might be a smidge of intuitiveness with Adobe, but maybe
not.
- Mark
In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time,
[email protected] writes:
How to solve Audition CS6 error "The amount of audio to burn will not fit
on the CD........."?
created by ryclark (https://forums.adobe.com/people/ryclark) in
Audition CS5.5, CS6 & CC - View the full discussion
(https://forums.adobe.com/message/6605916#6605916)

How to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.

Just broke my laptop that had CS6 (also have on my desktop and working fine) how can I get CS6 back onto my new laptop?

just broke my laptop that had CS6 (also have on my desktop and working fine) how can I get CS6 back onto my new laptop?

Hi tydormi,
Please follow the thread: how can I install PS cc on a new mac? In the creative cloud app it says it is installed where this issue is already discussed.
Let us know for further query.
Regards,
Ratandeep Arora

How do you transfer CS6 actions from pc to laptop or can it be done?

Hi, I have adobe photoshop CS6 extended on my PC and want to install it on the new laptop and was wondering how do I transfer the actions or brushes that I have on the PC to the laptop or can it even be done. Thanks for your time.

Try this
Photoshop Actions
Mac - Actions (not saved) Actions panel.psp Users/[user name]/Library/Preferences/Adobe Photoshop CSx Settings
Mac - Actions (saved) Actions panel.atn Program Files/Adobe Photoshop CSx(64bit)/presets/actions
PC - Actions (not saved) Actions panel.psp Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS5/Adobe Photoshop CS5 Settings
PC - Actions (saved) Actions panel.atn Program Files/Adobe Photoshop CSx(64bit)/presets/actions

How to solve the problem related with inputing of the text into Wordpress from Firefox 9 and 9.0.1. The problem is that after inputing the formatting gets lost. Taking in account high popularity of Wordpress I suppose the problem is quite serious.

How to solve the problem related with inputing of the text into Wordpress from Firefox 9 and 9.0.1.
The problem is that after inputing the formatting gets lost.
Taking in account high popularity of Wordpress I suppose the problem is quite serious.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* Clipboard not working -> [http://kb.mozillazine.org/Clipboard_not_working]
* Rich Text Editing -> [http://kb.mozillazine.org/Rich_text_editing]
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
Check and tell if its working.
Might not be related to your problem but some of your Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

How to Solve This in Win8: "Photoshop CS6 has stopped working ... ..."

Anyone know how to solve this problem?? Please help. It's given me a lot of headache and I need it fixed as soon as possible.
I have re-installed. And system restore. Everything is up-to-date. And I cannot find the problem to solve it.
Computer Details:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8 Pro, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz, Intel64 Family 6 Model 26 Stepping 5
Processor Count: 8
RAM: 6142 Mb
Graphics Card: NVIDIA GeForce GT 240, 1024 Mb
Hard Drives: C: Total - 122001 MB, Free - 14560 MB; D: Total - 953866 MB, Free - 176631 MB; F: Total - 296441 MB, Free - 8907 MB;
Motherboard: Gigabyte Technology Co., Ltd., X58A-UD3R
Antivirus: Windows Defender, Disabled
Other Details:
Faulting application name: Photoshop.exe, version: 13.0.0.0, time stamp: 0x4f61c045
Faulting module name: SelectivePalette.8li, version: 2.1.4.131, time stamp: 0x529e6913
Exception code: 0xc0000005
Fault offset: 0x0000000000009582
Faulting process id: 0x3ac
Faulting application start time: 0x01cf08a96051f5a5
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\Google\Selective Tool\SelectivePalette.8li
Report Id: a1a5ffce-749c-11e3-bf7b-1c6f65365a00
Faulting package full name:

Your Nik/Google SelectivePalette plugin crashed.
Disable the Nik/Google plugins for now, and contact Nik/Google for updates/bug fixes.

How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help please

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

How to solve thsi perform/form error occured in epc check

Call to a program containing a syntax error (CALL/PERFORM/SUBMIT)
Error in program /SAPAPO/SAPLATPQ_TIMESERIES - include /EPCOS/SD_CRSD0035_04 -
line 76
Syntax check error message:
A target area must be declared either explicitly with an INTO clause or implicitl
with a TABLES statement.
Internal Message Code: MESSAGE GYN
after clicking on error iam getting this statement how to solve this
PERFORM localise_reqtms(/sapapo/saplatpq_timeseries)
                USING space
                CHANGING l_ts_endhor.

Hi,
This may be beacuse of the Internal Table you are passing to the Subroutine.
So, In the Subroutine definition, we need to change the interface definition.
FORM localise_reqtms(/sapapo/saplatpq_timeseries)
           USING SPACE as type C
           CHANGING L_TS_ENDHOR LIKE <Internal Table Type which you are using>
Thanks & Regards,
Vamsi.

I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.

I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
I saw the below quote on Adobe forum
"You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
If possible please send the advise to my mail id: <Removed by Moderator>
Thanks
Uvaraj S

I already answered that. If you purchased a Suite then you can only install and activate it on two machines. Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite. You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time. If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again. I do not remember if there is a limit to the total number of activations you can process for the life of the software.

Photoshop Cs6 :: Can't open canon 650D cr2, how I solve this problem ??

Can't open canon 650D cr2, how I solve this problem ??

Is your CS6 ACR Plug-in up to date at version 8.6?
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

How to solve the error: "lightroom could not import this catalog because of an unknown error" when trying to "import from catalog"?

I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

OK, my starting point is that LR can happily contain 400000+ photos, and it's a mistake to create a 1 star plus catalogue as you suggest. Instead, I'd recommend you create a master catalogue of all your photos, which you can then query however you want - 2 star, or a certain keyword, or with "xyz" in the title etc.
If you are intent on going that way, you could try a slight change from what you've done so far. Instead of trying to import an entire catalogue and then delete no-star pictures, take the 2014 and 2012 catalogues and select only the 1 star photos. Then do an Export as Catalog for these items, and import the 2014-1star and 2012-1star into your new catalogue. That may get you past the problem images which I suspect are the problem.
If that doesn't work, or if you follow my initial advice, you're going to need to identify the image where the failure occurs. You may have a corrupt image file, and replacing it from your backup may be sufficient to resolve the problem. Alternatively, it may be a corrupt record in the catalogue, and in this case it may be sufficient to remove the image from the catalogue and import it again. You might try selecting everything in the 2014 catalogue and seeing if you can do an Export as Catalog, creating a clean 2014, and deleting 2014's previews folder might also get rid of a potential problem. Something else is to try the Export as Catalog for images 1-40000, then a second Export as Catalog for images 40002-50k.
So a few things you'll need to try, rather than a magic bullet, and a recommendation to change the underlying direction.
John

Every time I open my emails, my phone freezes so I can't do anything, it lasts around 10 minutes, does anyone know how to solve this?

Every time I open my emails, my phone freezes so I can't do anything, it lasts around 10 minutes, does anyone know how to solve this?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Note:
Make sure your Device is up tp Date.

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resoluti

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resolution, to no avail.
David.

Paragraph breaks are good for readability. ;-)
Have you noticed any difference between your MacBook and others at the Apple store? Wondering whether this is a configurable setting at the system level, i.e., DPI.
You can default Firefox to a larger zoom level to avoid having to zoom every page. You'll still be able to adjust the size for individual sites as needed. It sounds as though you are aware of these add-ons:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
There are some discussions about changing coming in Firefox 22 (I think) to address higher density displays like the Retina display. So perhaps there will be a built-in setting to address this in the future.

How to solve the issue "CUV check user equivalence failed" ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
In order to install Grid Infrastructure, we need to run Cluster Utility Verification (CUV) at first by running the cammand below:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output:
Performing pre-checks for cluster services setup
Check: User equivalence for user “ora11g”
Node Comment
rac1 failed
rac2 failed
Result: PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
Pre-check for cluster services setup was unsuccessful on all the nodes.
As you see above, check user equivalence failed. I have run the 4 commands to fix this error as below:
[ora11g@rac1 /]$ ssh-keygen
Its output:
Generating public/private rsa key pair.
Enter file in which to save the key (/home/grid/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/grid/.ssh/id_rsa.
Your public key has been saved in /home/grid/.ssh/id_rsa.pub.
The key fingerprint is:
0c:10:6c:3b:ae:21:63:64:f8:0d:0e:d8:f0:41:32:ff [email protected]
[ora11g@rac1 .ssh]$ cat *pub >>authorized_keys
[ora11g@rac1 .ssh]$ ssh rac1
Its output:
The authenticity of host ‘rac1 (127.0.0.1)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
[ora11g@rac1 .ssh]$ ssh rac1-priv
Its output:
The authenticity of host ‘rac1-priv (192.168.137.35)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1-priv,192.168.137.35′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
After run the 4 commands above, I run the command below again:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output is the same:
PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
I think the problem is "Broken pipe" and ssh cannot write authorized_keys to the machines.
My question is:
Do any folk understand how to solve the issue CUV "check user equivalence failed" for 2 VMs ?
Thanks.

Folks,
Hello. Thanks a lot for replying.
I have installed Grid Infrastructure a few times. Each time, on step 7 of 9, the installer fixes and checks 2 machines correctly. The entire installation has 3 parts as below:
1) Install Grid Infrastructure for a Cluster
2) Execute Root Scripts for Install Grid Infrastructure for a Cluster (script is root.sh)
3) Configure Oracle Grid Infrastructure for a Cluster that includes NCA, ASMCA, PICA and CVU.
Each time, on step 8 of 9, the Installer installs Grid Infrastructure for a Cluster successfully that includes "Prepare, Copy files, Link binaries, Setup files and Perform remote operations".
But when the Installer get to part 3 CVU, it fails and then the Database cannot be installed.
Deinstall Grid is a very complicated process to do. Because of this reason, we need to run CVU at first to make sure everything is correct for 2 machines before install Grid.
Even we ignore "user equivalence (ssh)", we don't know whether other items can be passed or not because CVU cannot proceed to check the machines.
My question is:
How to have the script "runcluvfy.sh" continue to check the machines while confronting "user equivalence failed" ?

How to solve worsening cs6 performance at high temperatures? (laptop)

Similar Messages

Maybe you are looking for