How to sort out your problems with the os 4 upgrade.

I'm in the UK, and I am an Orange customer. I have just been in contact with an amazing guy called Lee, who has sorted my problem for me. His advice.......
go into
Settings, general, scroll down to bottom of the screen to Reset, and tap on it.
Go to 3rd option, Reset Network Settings and tap on it, a red box will appear, tap to accept. Screen will close and Apple logo will appear, LEAVE to power up on its own, and re-enter your wi-fi connection password information.
If this fails to cure your problem, Connect your iphone to a different computer,
When your iphone shows up in itunes, click on it and do a RESTORE WITHOUT BACKUP, leave until your phone has restored and then plug into your own computer. You can now back up from your own computer information
Hope this solves our problems

Apple does not provide support here.
This is a users forum.
Everyone here is a user like yourself.
If you would like support from Apple you can contact them by phone or online.

Similar Messages

  • How do I resolve a problem with the Pompiere font download?

    How do I resolve a problem with the Pompiere font download for Word on a MacPro?

    never mind... download must have been corrupt. re-downloading it seems to have fixed the problem.

  • How do you customize your sync with the new itunes?

    How do you customize your sync with the new itunes?

    Connect the device
    Tap the icon for it towards the top right of the iTunes window
    Same as before...
    tt2

  • My iphone 5s have problems with the battery to upgrade to IOS8, the problem is that low battery level quickly since I upgraded to IOS8.

    My iphone 5s have problems with the battery to upgrade to IOS8, the problem is that low battery level quickly since I upgraded to IOS8.

    recalibrate your battery.

  • How to solve a serious problem with the Battary of my T500 laptop ?

    Hi Forum,
    My personal laptop is Lenovo THINKPAD T500 2055, and its main specifications are as follows:
    - 39T6651 SBB 9 CELL LI-ION BATTERY
    - Intel Core 2 Duo processor T9400 (2.53GHz 1066MHz 6MBL2)
    - 8 GB DDR3 SDRAM Memory Module 4 GB (2 x 4 GB) 1066MHz DDR31066/PC38500 DDR3 SDRAM SoDIMM Kingston.
    - 2 GB Intel Turbo Memory hard drive cache.
    - ATI Mobility Radeon 3650 with 256MB.
    - 160 GB Hard Disk Drive, 7200rpm.
    - Windows 7 Ultimate with the latest Service Pack (x64).
    My problem precisely and concisely is the Battary. I have been using my laptop with the same battary since 01.01.2009 (Almost 3.5 Years), and the battary has been working quite OK.
    Most of the time my laptop is plugged in and working with the electricity. However, A very few times I used the laptop while it is running on battery, Nevertheless, I have the habit to empty the batter once in a while i.e. Every 3 weeks, I unplug the charger and keep using the laptop till I see the warning orange sign (5%), then, I plug it in again.
    Thankfully, I never had any problems with the battary nor the laptop, and when I charge the laptop usually it shows full sign (100%).
    Three days ago, All of a sudden my laptop starts flashing the orange battary sign constantly while charge indicates 100%. When I try running on the battery by unplugging the AC adapter, the laptop loses power immediately and shuts down right away.
    What do you think should I do? Could you please provide me any useful tips to resolve this problem?
    I would greatly and sincerely appreciate all your inputs !
    Thanks for your consideration of my request, and I very much look forward to hearing from you at your earliest convenience !
    Solved!
    Go to Solution.

    In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery.   (from memory, so exact wording may be off)
     The lower the numbers you use there, the longer the battery *should* last.    These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
    --- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

  • Problem with the workbook after upgrade

    Hi all,
    We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
    1. What could be the possible reason behind this?
    2. What exactly got changed in the system which reflected this problems?
    3. What other problems might have occurred which we may not have noticed?
    4. How can I find out the number of workbooks affected due to this?

    Dear ,
    This is known issue:
    Please implement the below mentioned note as this will solve your issue,
    Note 1609237 :  Subsequent correction to 1567679
    Regards,
    Arvind

  • Problems with the latest firmware upgrade

    I found a problem with the 01-10-2006 firmware upgrade. Now that it is inside my ipod certain videos don't play properly anymore. Actually the video starts, it plays normally for a while and then it goes still for a few seconds and then, when it plays again, the audio is gone.
    It always happens in the same point with the same video. In particular, just in case someone wants to try, it happens in the latest nasa video podcast.
    I don't know what to do!
    I'll try to step back to the 1.0 version...

    I'm having this problem as well. Sinse I updated the firmware all of my movies get stuck about every 10 seconds then if I wait a few seconds they start up again but with no audio. I'm quite certain that this is a problem with the firmware sinse the videos play fine on quicktime, they used to play fine in my ipod before I updated it, and I can get it to play the parts it gets stuck at if I rewind it but it happens very frequently and each time takes a while to reload. If anyone has found a way to solve this problem please let us know.

  • HT4322 4th generation ipod shuffle how do you add your playlist with the songs in the order you want

    I have a playlist with songs in the order I wish to hear them if I don't wish to have them shuffled.  I've been unable to add my playlist to my new ipod shuffle (it's absolutely no problem with my 2nd generation ipod shuffle) in the order I wish the songs to play. It's been putting the songs in by the artist name.  How do I have it add the songs in the order I have them listed on my playlist?

    Here's what I'm doing:
    When I connect the ipod to the computer, I click on  Devices showing my ipod.
    A window opens, and I click on Music. 
    Sync Music is checked, and I've checked the playlist I want.
    I then click on the Sync button at the lower right side of the Music menu.
    A display on the menu bar shows "Syncing Music to My ipod," and indicates it is copying 1 of 146 (the number of items on my playlist), and the name of the song.
    The songs are all on my playlist, but it is listing them by Genre (I just figured that out), and this is the order in which they are on the ipod.
    I guess my question at this point is how/where/what do I select to have the songs synced in the order I have them on my playlist.
    I appreciate your input.

  • How can I debug a problem with the 3g data connection on my iPhone 4s?

    This question didn't get any answers in the "Using iPhone" forum. Thought I would re-ask here. Note, I had to reset the network again today 2 days after the last reset:
    I've been having intermittent problems with my 3g data connection on my iPhone 4s on ATT. Whenever this happens I see full bars etc, but can't browse from safari or get any data in other apps. My wife's iPhone 4 right next to me has no issues at all. Switching on/off airplane mode and turning off/on Cellular Data does not help. The only thing that helps is resetting the Network Settings or hard restarting the phone.
    I figured my problems were hardware related so I took my phone in for a replacement the other day. Things started out fine but after I upgraded it to 5.01 and restored my backup and now I am back to having the same issue today. I assume the issue is with something coming from my backup / restore but is there any way for me to pinpoint what could be causing the issue. I have a lot of apps, I'd rather not have to reinstall and set them all backup manually, but I would if I knew that would fix the problem... but for all I know one of the apps could be causing it.
    Anyone have any logs I can check or testing I can do on my end?
    Thanks!

    Unfortunately, Apple does not make any logs available to the average schmoe (like us) for networking, kernel dumps, or anything else (assuming, of course, it is not jailbroken).
    Your best bet is to take it back into the store. Ask them to look at the notes in GCRM regarding the last time this occured, then explain after upgrading to 5.01 it is occuring again. Then ask them for a phone swap since it is a reoccuring issue and doesn't sound like an OS/SW issue. Good luck!

  • How to sort out service problems on iphone?

    could someone kindly help me to sort this problem out

    If you posted exactly what your problem is & exactly what model iPhone & version of iOS running on it, perhaps someone could offer a suggestion. However, will the info you've provided so far, there is no much that can be suggested.

  • How can I troubleshoot this problem with the iMac keyboard? My keyboard disconnects and reconnects within seconds but all the typing is lost while it was offline.  This is usually 5 seconds or less but happens 2 or 3 times in a minute.  Annoying!

    My wireless keyboard disconnects and reconnects within seconds but all text that was typed during the time offline is missing.  i have to go back and retype missing parts.  What can I do to troubleshoot this.  The computer is only about six month old.  This problem is new in the last couple weeks.  Thanks for suggestions.

    Beat me to it, Donald.     But there is a possible alternative.  If the batteries have been replaced since new, were they replaced with the same batteries or another make.    There are examples around which do not fit perfectly and leave a certain amount of movement inside the battery housing.  That could lead to instability such as the OP describes.

  • HT1848 How do you transfer your purchases with the new iTunes format?

    I'm trying to update my iPod but it keeps saying I have to transfer my purchases. But I don't know how to with the new iTunes format...

    On iTunes 11 you can do it via File > Devices > Transfer Purchases, or I've changed the view on mine so that the old sidebar shows via View > Show Sidebar and I can then control-click the device (right-click if you are on windows) and select Transfer Purchases from the popup

  • How to log out of icould with the ipod touch?

    i need to log out of icloud on my ipod touch... and it just gives me the option to delete my accout and i don't want too1 HELP ME PLEASE!!!

    Just why do you want to log out?
    If you delete the account on the iPod you only delete the account on the iPod. The account and information still exists in the cloud.
    When you delete you are left with the option of what do do with the information like iCloud contacts that are on the iPod..

  • [SOLVED]Problems with the last networkmanager upgrade

    Since the last networkmanager upgrade my host name gets changed automatically. This, of course, causes the whole gnome desktop to malfunction. Did anyone else experience this? Is it a bug or what?
    P.S.
    Forgot to mention that this problem doesn't occure after downgrading of the packages (nm and nm-applet). There are two possibilities:
    * Something is wrong with the new version
    * Something has changed in the configuration for the new version and it by default automatically changes the host name.
    Last edited by Caspian (2010-11-23 12:06:56)

    changing /etc/hosts is intended by upstream. there are three solutions to this "issue".
    1) nuke the feature out like i did for changing hostname, which sucks and i don' t want to do it anymore
    2) write a correct /etc/hosts
    3) write a plugin for archlinux. right now networkmanager is using a generic plugin called keyfile.
    best solution is to implement 3 and push it upstream, the ugliest is 1. patches welcomed
    P.S a correct /etc/hosts conform nm code
    /* We need the following in /etc/hosts:
    * 1) current hostname mapped to current IPv4 addresses if IPv4 is active
    * 2) current hostname mapped to current IPv6 addresses if IPv6 is active
    * 3) 'localhost' mapped to 127.0.0.1
    * 4) 'localhost6' mapped to ::1
    * If all these things exist we don't need to bother updating the file.
    it seems that the standard is to map hostname to your active ipv4 and therefor is your problem. you need to start mysql after nm is connected.
    P.S patch here. http://pkgbuild.com/~ioni/disable_etc_hosts.patch try it yourself. But i still think is wrong
    Last edited by wonder (2010-11-26 17:09:14)

  • Problem with the Clipboard after upgrade

    We had been using Intermedia, along with the Clipboard and WebAgent in Oracle 8.1.5. A few days ago we upgraded to 8.1.6 (I performed the Intermedia upgrade as well). Oracle is Installed on a Solaris 7 server.
    We installed everything into a new Oracle Home.
    The code we had written using the Intermedia procedures and packages still works but now the CLIPBOARD is not working. The ClipBoard and Web Agent are installed on an NT server running IIS
    Using the ClipBoard, when we we try to connect to the database we get the folliwng error:
    ORA-12564: TNS connect refused
    In the LISTENER.log on the server we see the following corresponding errors:
    26-APR-2000 09:18:16 * (CONNECT_DATA=(SID=cadv)(ORACLE_HOME=/u01/app/l1oradv/product/8.1.5)(SERVER=DEDICATED)(CID=(PROGRAM=C:\WINNT\System32\inetsrv\inetinfo.exe)(HOST=L10008016)(USER=IUSR_L10008016))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.27.
    125.68)(PORT=1206)) * establish * cadv * 1201
    TNS-01201: Listener cannot find executable /u01/app/l1oradv/product/8.1.5/bin/oracle for SID cadv
    The /u01 directory is the OLD Oracle home. I cannot figure out where the Clipboard is pulling that name from. I went through the tnsnames.ora on the client and the server and both point to the new Oracle home. I also went through the LISTENER.ora and there are no reference to the old Oracle home. On the NT Server where the Clipboard and Web Agent are installed I went through the wsc.cfg and everything looks good. There is no reference to the old Oracle home. I also verified the old listener is not running on the Solaris server.
    Where could this be buried? Everything else (DBA Studio, SQL*Plus worksheet) is working from the same NT Server running the Clipboard. I cannot find where the old Oracle home reference is coming from.
    Marilee

    Hi,
    The Clipboard uses the Web Agent to connect
    to the database, so it should be possible to
    track this down just using the web agent.
    The web agent itself is just a regular OCI
    client application - it doesn't do anything
    special when it comes to connecting to the
    database, it just uses the SERVICE attribute
    in the WSC.CFG file as a SQL*Net TNS service
    name in TNSNAMES.ORA. The first thing to try
    is to test the database agent being used by
    the clipboard from a browser. Eg:
    [URL=http://host/intermedia/<dbagent-NAME>/~test]http://host/intermedia/<dbagent-NAME>/~test[/URL] That should result in the same error message
    being logged by the listener and should also
    result in an error message being displayed
    on the browser window.
    To verify that the Web Agent is reading the
    correct TNSNAMES.ORA, you can create another
    database agent and include the entire
    connection string as the service name instead
    of using a TNS service name. This is probably
    best done by editing WSC.CFG, creating a new
    database agent by copying the existing one
    and replacing the service name with the
    connect string from TNSNAMES.ORA, making sure
    the string is all on 1 line. For example:
    [database_agent.sample-test]
    service = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = mypc)(PORT = 1521)) )(CONNECT_DATA = (SERVICE_NAME = orcl) ) )
    database_user = scott
    database_password = tiger
    authorized_request_class = retrieve
    authorized_sql_statements = procedures
    authorized_sql_procedures = *You can also verify the connection string
    using SQL/Plus. For example:
    sqlplus scott/tiger@"(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = mypc)(PORT = 1521)) )(CONNECT_DATA = (SERVICE_NAME = orcl) ) )"If the connection string works but the TNS
    service name doesn't, then I suspect that the
    web agent is looking at an old TNSNAMES.ORA
    file. If so, its because an old file exists
    in the PATH being used by IIS. Another
    possible, though much less likely problem is
    that there's an old OCI DLL and/or Oracle
    home in the PATH used by IIS.
    Simon

Maybe you are looking for

  • Problem with Adobe Acrobat Pro XI after installation on Mac

    I just installed Adobe Acrobat Pro XI on my Mac. My Mac has the correct version of OS and Safari yet I can not launch Adobe. When I launch it, an error box comes up and says a problem has been reported to Adobe.  That's as far as it gets. Has anyone

  • 'Source Directory doesn't exist' error in sender file adapter

    Hi All, I m getting the error 'Source Directory doesn't exist' in sender file adapter. The source file directory doesn't exist in XI Server. Its in a different system. gone through other sdn t hreads. the options seems to be 1. either to mount the So

  • Can I put a hard drive from a 12" powerbook into a 17" powerbook?

    I have a 12" powerbook which needs a new logic board. I have found a 17" powerbook for sale which needs a new hard drive. Could I put the hard drive from my 12" into this 17"?

  • Posting date = Value date does not work

    hi,    this is the problem given by them, symptom: When the parameter 'Posting date is value date' is active, the posting date of all movements of a bank statement is the bank statement date and not the value date of the individual movements of the b

  • Bank Charges in F110

    Hi Everybody, We want to post the bank charges,while executing F110 transaction. We have tried with 'Expenses/Charges' in FBZP,but of no use,as its only ment for printing purpose. We found from this forum that 'Instruction Key' will take care of this