How to specifies global severity level for a Trap

This field shows the severity or the intensity of the trap. It could be 0-All, 1-Critical, 2-Major, 3-Minor, 4-warning, 5-Clear, and 6-Info.
But all trap are receved in my Trap viewer is same and it is Clear(5)
Is there any way i can change this trap level ,to critical , or major etc ...
Thank you,
Arunmon

Similar Messages

Set logging severity level for clustered servers

How can I set the logging severity level for clustered servers just once at the cluster level rather than one at a time at the server level?

I know the logging is server by server, but surely there is a way to configure the multiple servers with one change rather than one by one. We have 40 some servers in the cluster.

How to set transaction isolation level for a method in a Local Interface

 By reference at:
 http://e-docs.bea.com/wls/docs61/ejb/reference.html#1071267,
 the value for method-intf can only be "Remote" or "Home".
 My question is--
 How to set transaction isolation level for a method inside a Local Interface or
 Local_Home Interface?
 Thanks.
 Xing


I'd try 6.1SP2. I'm pretty sure this works now.
 -- Rob
 Xing wrote:
 > I tried "Local", but got an error when deploying the EJB jar, saying that only
 > "Remote" or "Home" is allowed.
 >
 > Any idea?
 >
 > Xing
 >
 > Rob Woollen <[email protected]> wrote:
 > >
 > >
 > >Use LocalHome or Local.
 > >
 > >-- Rob
 > >
 > >Xing wrote:
 > >
 > >> By reference at:
 > >> http://e-docs.bea.com/wls/docs61/ejb/reference.html#1071267,
 > >> the value for method-intf can only be "Remote" or "Home".
 > >>
 > >> My question is--
 > >>
 > >> How to set transaction isolation level for a method inside a Local
 > >Interface or
 > >> Local_Home Interface?
 > >>
 > >> Thanks.
 > >>
 > >> Xing
 > >
 > >--
 > >
 > >----------------------------------------------------------------------
 > >
 > >AVAILABLE NOW!: Building J2EE Applications & BEA WebLogic Server
 > >
 > >by Michael Girdley, Rob Woollen, and Sandra Emerson
 > >
 > >http://learnWebLogic.com
 > >
 > >
 > >
 > >
 > ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
 > ><html>
 > >Use LocalHome or Local.
 > >-- Rob
 > >Xing wrote:
 > ><blockquote TYPE=CITE>By reference at:
 > > http://e-docs.bea.com/wls/docs61/ejb/reference.html#1071267,
 > > the value for method-intf can only be "Remote" or "Home".
 > >My question is--
 > >How to set transaction isolation level for a method inside a Local
 > >Interface
 > >or
 > > Local_Home Interface?
 > >Thanks.
 > >Xing</blockquote>
 > >
 > ><pre>--
 > >
 > >----------------------------------------------------------------------
 > >
 > >AVAILABLE NOW!: Building J2EE Applications & BEA WebLogic Server
 > >
 > >by Michael Girdley, Rob Woollen, and Sandra Emerson
 > >
 > >http://learnWebLogic.com</pre>
 > > </html>
 > >
 > >
 AVAILABLE NOW!: Building J2EE Applications & BEA WebLogic Server
 by Michael Girdley, Rob Woollen, and Sandra Emerson
 http://learnWebLogic.com
 [att1.html]

How can one mark several contacts for a message simliar to Sony Ericsson K800i of 2006

How can one mark several contacts for a message simliar to Sony Ericsson K800i of 2006

hi, i also have just bought a K800i and a PC and given up on macs due to their continual incompatibility and lack of support (unless you can afford the ridiculous constant upgrades). give the page below a go for your problem. if it works, let me know. good luck
http://www.muxton.com/2006/09/02/howto-sync-itunes-playlist-to-your-mobile-phone -or-non-ipod-mp3-player-mac-os-x-only/

How to get the inheritance level for an atribute value

hi,
i have to get the inheritance level for an attribute value for a given user in Org.struc.

Hi,
Check out table T77OMATTUS for inheritance level for an attributes
Regards,
Neelima

How to define TX_SERIALIZABLE isolation level for a CMP EJB

Hi JDev Team,
I have created a portable Primary Key Generator realized as a CMP Entity Bean which
has a method getNEXTID().
This method returns a PK from a table
and increments it by one.
My question is:
How can I set the transaction isolation level of getNEXTID() to TX_SERIALIZABLE in order to avoid phantom and dirty read problems?
Best Regards,
Stoyan K.

Assuming you are using the bc4j cmp implementation, the default for isolation level is TX_READ_COMMITTED so I don't think you run the risk of phantom or dirty read.
Unfortnately as of now this property cannot be specified declaratively.
It looks like you want to run the getNEXTID() with the RequiredNew transaction attribute.
null

How to find the toner level for HP LaserJet 1500L Drum and Toner set

You may have lost the original 1500L CD that came with the printer, or bought it second hand.
So how do you find out how much toner or drum fixer remains!
Actually this is a dumb question. The legacy 1500 and 1500L use dumb toner and drum cartages. They have a chip which simply counts the number of pages printed, and when a preset number (as per cartridge size) have been printed, it sends a signal to the printer to replace it. This is ok if you print the average amount of ink per page, but if you print a lot of photos, the cartage will be exhausted before the indicator flashes, and if like the rest of us you print the usual selection of documents etc, then probably about 50 to 25 percent of the toner remains - what a waste!.
Ok - but its kind of nice to know how many pages have been printed.
Do exactly the following:
1) Press the (green) GO and (orange) CANCEL button simultaneously.
This will then print a status and configuration page. The top left hand column will give the number of pages printed. However if you reset the NVRAM to allow you to use up the supplies, then this will be the count of pages printed since this was reset!.

Hello tmsmatt,
Please try the below step...
On the product control panel, press and hold the Resume button ( ) for 2 to 3 seconds.
The printer would print a configuration page and you'd find the info you required in it.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Urgent: How to raise portal trace level for debug?

Please give all methods to raise different traces for portal.
Thanks! Points!

Hi Jennifer,
Check http://help.sap.com/saphelp_nw2004s/helpdata/en/e2/f410409f088f5ce10000000a155106/frameset.htm
Best regards, Maksim Rashchynski.

How can I use several albums for a book?

I started a book but I cannot change the album I want to pull photos from without starting a new book.
Any suggestions?

I started a book but I cannot change the album I want to pull photos from without starting a new book.
I assumes you have a book started - now open the second album and drag the photos to the book project in the source pane on the left - do it again with each album you want to use
All of the photos you drug to the book - from albums or events - are now available to use in the book - you can add additional photos at any thime by dragging them to the project project in the source pane
LN

Patch set level for financial family

Hai All
I have some confusion regrding family & module. These are quries
1) what is the difference between a family and a module.
2) what are the different families and modules present & how to find out them in oracle applications.
3) How can we find patchset level for a particular family in OA
4) How can we find out different products in present in each family.

1) what is the difference between a family and a module.Module is a specific Oracle Applications product (i.e. GL, AR, AP, FA, CE, ..etc).
Minipack: An aggregation of patches at the product level. For example, Inventory Minipack G (11i.INV.G) contains all the latest patches for the Inventory product at the time the minipack was created. Minipacks are named in alphabetical sequence such as 11i.INV.E, 11i.INV.F, 11i.INV.G, and so on. Minipacks are cumulative. In other words, 11i.INV.G contains everything in 11i.INV.F, which contains everything in 11i.INV.E, and so on. The terms patchset and minipack are often used interchangeably.
Family Pack: An aggregation of patches at the product family level. For example, Financials Family Pack C (11i.FIN_PF.C) contains all the latest patches for products in the Financials family at the time the family pack was created. Family product codes always end in "_PF" and family packs are given alphabetical sequence such as 11i.HR_PF.B, 11i.HR_PF.C, and 11i.HR_PF.D. Family packs are cumulative. In other words, Discrete Manufacturing Family Pack G (11i.DMF_PF.G) contains everything in 11i.DMF_PF.F, which contains everything in 11i.DMF_PF.E, and so on.
2) what are the different families and modules present & how to find out them in oracle applications- Use Patchset comparison tool - patchsets.sh
Note: 139684.1 - Oracle Applications Current Patchset Comparison Utility - patchsets.sh
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=139684.1
- From OAM
- Use Applications Diagnostic Tests
- Use $AD_TOP/sql/adutconf.sql
3) How can we find patchset level for a particular family in OAThe above should be helpful to find out patchset level for a particular family pack. You may also check the following thread:
Family pack patching
Family pack patching
4) How can we find out different products in present in each family.On OracleMetaLink, click the Patches & Updates tab. Choose the Quick Links to the Latest Patchsets, Mini Packs, and Maintenance Packs link to see a listing of "Latest Oracle Applications 11i Packs"

Prime Infrastructure 2.0 Link-Down Alarm severity level

Hi,
i have been looking for a way to lower the severity level of link-down Alarms. I use the threshhold utilization feature and want to generate an alarm when CPU or Memory goes over 90%, this works fine. Problem is that when you enable "Switches and Hubs" or "Routers" category to receive alarms under: Operate -> Alarms & Events -> Email Notifications, you define only Critical alarms should generate an email and Link-down is by default Critical.
Well you figure that you should be able to change this, but i can't find anything to change the severity under: Administration -> System Settings -> Severity Configuration.
Do anyone know if this is even possible? If so please tell me how..

Hi,
Yes it is possible.
Changing Alarm Severities
You can change the severity level for newly generated alarms
Note Existing alarms remain unchanged.
To change the severity level of newly generated alarms:
Step 1 Choose Administration > System Settings .
Step 2 Choose Severity Configuration from the left sidebar menu.
Step 3 Select the check box of the alarm condition whose severity level you want to change.
Step 4 From the Configure Severity Level drop-down list, choose the new severity level ( Critical , Major , Minor , Warning , Informational , or Reset to Default ).
Step 5 Click Go, then click OK.
Check the attached screen shot ..
Thanks-
Afroz
***Ratings Encourages Contributors ***

Access level for Tab

Hi,
How can i define security level for each tab?
i have set of users and i want a particular tab to be displayed to certain users only not to all users.
i have already defined access privilege for the particular tab in the Advance option for tab granting privilege to specific user and also specified that this particular tab should not inherit privilege from the page, but still the tab is displayed to all the users.
regards,
Sunil
null

I also have this problem. I am using Portal 10.1.2.0.2.
I've set up two groups (systema_users and systemb_users) and have set up two tabs, each of which should be only accessible to one of these groups. However, no matter which user I log in as, I can see both tabs regardless of which group the user belongs to. On each tab I have set access to 'Specify Access Settings' and have specified the appropriate group, with the Customize Portlets (Full) privilege, since I need them to be able to customise the content of the tab. What am I missing here?

Stdout severity level

Hi all,
I am using weblogic application server version 923 with two managed nodes. One of the managed node has an different team's ear that our application uses. The managed node's logging severity level for the stdout is set to NOTICE and there is no filtering enabled and uses JDK logging.
The ear does not contain a log4j.xml. But the the server node's .out file shows the DEBUG and INFO messages from the java classes contained in the ear.
I assumed that if the severity level in admin console is set to NOTICE, the DEBUG/INFO log4j messages of the application will be filtered out.
The other issue, is that there is no log4j.xml on the entire linux box on which the application server is running. I confirmed that using find command.
Also the admin node's logging severity level /filter are disabled; I wonder if this is causing an issue?
We need to install this ear in production weblogic enviornment thus wondering as how to avoid application related DEBUG/INFO messages in the .out file?
Any help is highly appreciated.
Thanks in advance.
Edited by: user11308978 on Sep 8, 2010 3:59 PM
Edited by: user11308978 on Sep 8, 2010 4:01 PM

Yes, you should - although I've never tried it personally with a clustered WLS. I'd suggest that you try one of the WLS forums - you'll probably get a better response.

NOKIA X3-02: Several Alarms for different times

NOKIA X3-02 V6.00: how I can make several Alarms for different times.
Solved!
Go to Solution.

Hello,
why nokia does not add different Allarms in Allarm menu?
Best Regards

How to make Delivery block at Sales Order Header level for specific materia

Hi,
My client want to create a delivery block EDI order at the Order Header level for specific materials
How can we achieve this.

Dear Varada rajan
Go to material master, select "Sales: sales org.1" view and assign "01" against the field "DChain-spec. status" and save. By assigning, for a particular sales area, you can block that material.
Now go to OVSU select 01 and assign "B" against the field "Block delivery".
Now create a sale order and post the outcome.
thanks
G. Lakshmipathi

How to specifies global severity level for a Trap

Similar Messages

Maybe you are looking for