How to specify "From" address when sending Outbound e-mail from Siebel

Hi, when sending an e-mail to Outlook exchange server among all there are 2 fields: Sender and From, where Sender is an address of the profile from which e-mail will be sent and "From" address is the one that will be displayed to the receipient ("From" is not related to any profile and any e-mail address could be specified there).
My question is how can we specify this "From" address in Siebel while using standard e-mail functionality (Communications Outbound Manager sends data based on created activity record). Client wants to specify any e-mail address regardless ofcommunication profile used (which is only one).

Hi Mathan,
Please check sap note
SAP Note No. 1304146 Email Signatures feature note
1163250 - How to Create an Email Signature on several rows
I hope it will solve your issue.PLease mark thread as answerd.
Best Regards,
Atul

Similar Messages

  • How to set Default text when sending a blank mail from SAP

    Hi all,
    How to add Signature with company logo in the mail body.
    User should see at least one default text (eg; Hi) in the mail body if the sender did not type any text in the mail body when sending a mail from SAP.
    Is it possible to set like this on Subject also.
    Kindly share your ideas.
    Regards,
    Mathan A

    Hi Mathan,
    Please check sap note
    SAP Note No. 1304146 Email Signatures feature note
    1163250 - How to Create an Email Signature on several rows
    I hope it will solve your issue.PLease mark thread as answerd.
    Best Regards,
    Atul

  • Contact conflict when sending an e-mail from Mac

    I would like to address an issue after sending an e-mail from my Mac computer. The contact changes to the previous name that I had given in the past and its being added to the new one. The result is to have a contact with many names.Is there any solution to this problem?
    Thank you in advance,
    Menelaos

    I hadn't realised it was more than one contact.
    The following article(s) may help you.
    Resolving duplicate contacts

  • How to set email "from" address when sending photo

    when I send photos from my iPhone people respond to the wrong address. This just started. How do I switch the FROM address to the correct email address.

    The From address you want has to be your default account - you can set this in the Mail settings.

  • How can I not show my e-mail address in "from" line when sending out e-mails?

    I don't want to show the e-mail address in the "from" line when I send out e-mails.  Is there a way to hide that?
    Thank you!

    whiskey sour wrote:
    Okay here is where I am at so far and thanks for sticking with me, we may have success eventually! Can you confirm the following:
    1--I Go into the iMac Address Book and click on File/Export/Address Book Archive.
    2--It then asks me where I want to save Address Book and I indicate Desktop.
    3--I then assume I somehow transfer this Desktop file to the iBook--can I just copy the file, email it to the iBook, and paste it into the iBook Desktop?
    Yes
    4--If I'm accurate so far, I then do the same with the iBook Archive and save it
    to the iBook Desktop.
    Yes
    5--NOW I open the iMac archive that is on the iBook desktop and it will ask me if I want to overwrite the existing iBook address book and I indicate Yes and it will then place the iMac address book on the iBook.
    Yes
    6--When and if I want to put the iBook address book back into the iBook I click on the file that is on the iBook Desktop and proceed to put the 'old' iBook address book back in.
    That's it.
    If I am correct on this, another question arises--does this method transfer every email address I use as I notice in Address Book under 'All Contacts' there are some that are missing. I may not have manually added each and every address to my Address Book so maybe that is why some are missing and may not show up in this transfer of Archives? Thanks for your patience Barney.
    That's what I would assume. Like I said, the Archive is really just a copy of the AddressBook folder which contains everything related to Address Book and Mail's previous recipients.
    Now, the Address Book contacts and Mail's previous recipients are different entities--they just share the same storage location. So, if that is what you mean by there are some missing, they should still auto-complete in Mail since the previous recipients also is used for auto-complete.

  • How eliminate some email address when sending to a Group

    On Mac mini signed up for Thunderbird because Mail/Comcast would receive but not send messages. I have groups listed in address book. I can select a group and Thunderbird sends BCC out fine. I want to be able to eliminate some of the members in the group from some emails. I do not see who they have been sent to until the email has been sent. I want to edit the names in the group when I get ready to send. Any way I can do this. This is the way I was handling group messages in Mail. It worked fine until they decided to receive but not send my e-mails.

    As per https://support.mozilla.org/en-US/questions/1022522 you solved your problem. Please mark this thread as 'Solved'.
    Thank you.

  • Error when sending message(e-mail) from Process Chain ?

    Hello SDN s,
    How ya all ?
    I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
    The following is the Job Log Entries....
    30.06.2006 18:05:53 Job started                                                                          00        516         S    
    30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE)     00        550         S    
    30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out                                RSM        794         I    
    30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent          SO        654         S    
    30.06.2006 18:06:00 Error when sending message                                                        RSRA2        11         S    
    30.06.2006 18:06:01 Job finished                                                                        00        517         S    
    Thanks !!!
    Best Regards....
    Sankar Kumar
    +91 98403 47141

    Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
                                                                         Duration   Duration 
                             Completed  Error      In transit Waiting    In transit Waiting  
                                                                             hh:mm      hh:mm                                                                               
    B08(100)                        0          0          0          0                                                                               
    FAX Telefax              0          0          0          0       0:00       0:00
         5  INT Internet             0          0          0          0       0:00       0:00                                                                               
    SMTP              0          0          0                  0:00       0:00                                                                               
    X40 X.400                0          0          0          0       0:00       0:00
            RML R/Mail or            0          0          0          0       0:00       0:00
            PAG                      0          0          0          0       0:00       0:00
            PRT                      0          0          0          0       0:00       0:00
    So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
    could u give the steps to do that ? as i am the only one BW guy here !?
    Thanks !!!
    Best Regards....
    Sankar

  • Error message when sending an e-mail from my phone

    Recently, I have been un able to send e-mails from my phone. When I try to send them, almost immediately I get an e-mail from
    "RIM_bca28a-e9c0-11d1-87fe-00600811c6a2" 
    The contents of the e-mail say:
    This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
    There is a .DAT attachment as well.
    Can anyone help me with this issue?

    See:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes

  • TS3276 How do I change my From address when sending an email?

    When I want to send an email from an alias email account, how do I stop my main email address from appearing in the email?

    Sorry.  See this 'https://support.apple.com/kb/ta23485'

  • Trouble when sending pictures by mail from iPhoto

    Hello. Recently, while sending pictures with the mail function of iPhoto 9, some pictures have been transformed in tiff format (in this case the name of the picture is becoming PastedGraphic-1 (or2, 3 etc...).tiff.
    The size of these .tiff files being at least 3Mo (or more), in general my messages never arrived to their destination.
    This problem is not recurent: sometimes it happens, sometimes not, and you become aware of the problem when you receive an error messge of your internet provider regarding the size of the mail you sent and was not distributed because his size.
    So this is a little bit boring....
    Who got the same kind of problem? is there is a solution?

    Thanks for your comment.
    The original pictures are jpg. That's making this issue a little bit mysterious..
    One more thing: last time I got the problem, I was sending 7 pictures from iPhoto: two of them were compressed in jpeg, the 5 other ones in this PastedGraphic.tiff
    Total weight of the message: 21,9Mo instead of 1,8Mo. That's the difference!

  • Error when sending HTML format mail from Oracle 9i forms

    Dear All,
    i have created one procedure with 15 in parameter by which i can send mail in HTML format. due to length problem i am using 15 parameter, every parameter has length 32767, i am splitting HTML coding after every parameter length fulfilled
    when 3 or 4 parameter only fulfilled mail comes well, but more than 4 parameter fulfilled mail is not coming, will any one of you kindly please help me to resolve this
    following procedure i am using.......
    PROCEDURE P_SEND_MAIL( subject_p varchar2, salutation_p varchar2, plan_hdr_msg_p varchar2,
    plan_dtl_msg_p_1 varchar2, plan_dtl_msg_p_2 varchar2, plan_dtl_msg_p_3 varchar2, plan_dtl_msg_p_4 varchar2,
    plan_dtl_msg_p_5 varchar2, plan_dtl_msg_p_6 varchar2, plan_dtl_msg_p_7 varchar2, plan_dtl_msg_p_8 varchar2,
    plan_dtl_msg_p_9 varchar2, plan_dtl_msg_p_10 varchar2, plan_dtl_msg_p_11 varchar2, plan_dtl_msg_p_12 varchar2,
    plan_dtl_msg_p_13 varchar2, plan_dtl_msg_p_14 varchar2, plan_dtl_msg_p_15 varchar2, summary_p varchar2,
    cmplmntry_sign_msg_p varchar2, mailto_p varchar2 ) IS
    mail_from varchar2(100);
         mailhost varchar2(30) := 'MAIL-SRVR';
         crlf varchar2(10) := CHR(13)||CHR(10);
         mess_bdy varchar2(10000);
         Port number := 25;
         conn UTL_SMTP.CONNECTION;
    begin
         mail_from := 'IT-Department';
         mess_bdy := 'Date: ' ||TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' )|| crlf ||
         'From:' ||mail_from|| crlf ||
         'Subject:'||subject_p|| crlf ||
         'To: ' ||mailto_P|| crlf ||'' || crlf;
         conn:= utl_smtp.open_connection( mailhost, Port );
         utl_smtp.helo( conn, mailhost );
         utl_smtp.mail( conn, mail_from);
         utl_smtp.rcpt( conn, mailto_P );
         utl_smtp.data( conn, 'MIME-Version: 1.0' ||CHR(13)|| CHR(10)||
         'Content-type: text/html' || CHR(13)||CHR(10)||
         mess_bdy||salutation_p||plan_hdr_msg_p
         ||plan_dtl_msg_p_1||plan_dtl_msg_p_2||plan_dtl_msg_p_3||plan_dtl_msg_p_4||plan_dtl_msg_p_5
         ||plan_dtl_msg_p_6||plan_dtl_msg_p_7||plan_dtl_msg_p_8||plan_dtl_msg_p_9||plan_dtl_msg_p_10
         ||plan_dtl_msg_p_11||plan_dtl_msg_p_12||plan_dtl_msg_p_13||plan_dtl_msg_p_14||plan_dtl_msg_p_15
         ||summary_p||cmplmntry_sign_msg_p);
         utl_smtp.quit( conn );
    exception
         when others then
         null;
    END;

    did u encounter any error?
    Be more clear in ur saying. As i understood that - is when coming to 5th parameter u r not able to access it. Is it right?
    Message was edited by:
    USER_X

  • When sending/receiving an iMessage (from gmail address) how can I then receive or access my iMessages on my actual gmail account/inbox?

    When sending/receiving an iMessage (from gmail address) how can I then receive or access my iMessages on my actual gmail account/inbox?

    Hi,
    The Messages app can join 5 different services.
    The "iChat Originals" that include AIM, Jabber and Yahoo (although they were added at different times to the app)
    The Bonjour account that has been present for LAN based Mac to Mac chat and lastly the iMessages account in the Messages app that iChat has become.
    Google email IDs can be used as a Jabber ID in Messages as Google run a Jabber server.
    As the Google server does not follow conventional naming formatting it has it's own Add option in Messages.
    Effectively all the services are separate.
    Any email used as an Apple ID can be the iMessages account.
    Of course this may be a Google one like you have that can also be used as  Jabber/GoogleTalk ID or it may be an Apple issued ID (@mac.com @me.com or @icloud.com) that will also work as a Valid AIM Screen Name.
    It may be that someone has their Yahoo email as their Apple ID.
    8:35 pm      Monday; August 11, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server.  When I send to e-mail from another address, I get back an error saying the e-mail address is unknown.  My e-mail has worked fine for years until

    When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server.  When I send to e-mail from another address, I get back an error saying the e-mail address is unknown.  My e-mail has worked fine for years until yesterday.  HELP!

    The specific text of the error message is very important here — I'm not sure exactly you're encountering here.
    If you're able to connect to your email server and are able send email to other email addresses and if the failures are specific to one email recipient address, then please contact the intended recipient of the failing email, and confirm their address is valid.  (This is the way I'm reading your question.)
    If you are unable to send any email to any other email addresses and this is specific to your email address, then try the web mail client interface (if one is available) to verify your login user and password, and check with your email ISP for assistance.  If your email password works via web mail, follow this Apple troubleshooting guide, then — if everything else fails — I'd probably then entirely remove the email account from Mail.app and re-add it per your email ISP's particular setup requirements.  (Some issue with the setup or maybe a corrupt setting in OS X or a problem at the mail ISP servers is a common problem, but this effects attempts to send to all email addresses via that account.)
    An email account setup is specific to an email provider, unfortunately.   If you're using one of the more common email ISPs, then there are usually setup guides and frequently-asked questions posted online.

  • Default "send from" address when sharing photos in Backup Assistant Plus

    Hello,
    Is there a way to change the default "send from" address when sharing photos in online storage from the Backup Assistant Plus app on the Bionic?  I have found the setting on the VZW website for e-mail address maintenance in Backup Assistant Plus, but the address I'm using on the site did not affect the setting on the phone.  This is not a huge issue, but under the current setting, the Bionic is using an address to which I no longer have access, so I'd like to update this address if it can be done.
    Currently running Ice Cream Sandwich, 6.7.246.
    Thank you.

    Found the answer - there is a second link for settings on the media management screen which controls the default sending e-mail address.

  • How to skip dialogue box which ask you to confirm the operation when your used labview to send an e-mail from Outlook?

    I'm using Labview to send an e-mail from outlook and everytime I got a dialogue box which inform that a software is trying to send an e-mail. To send this e-mail I have to confirm operation. How can I avoid this dialogue box ?

    I don't know what code you're using but the attached VI works with my version of Outlook and doesn't have any pop-up messages. I downloaded it from somewhere a while ago but don't remember where it was from.
    Attachments:
    Email_sender.vi ‏54 KB

Maybe you are looking for