How to specify Host Server for Replicated Virtual Desktops within RDVH Collection

My question about how to specify Host Server for Replicated Virtual Desktops within Collection.
I know there is a aswered thread on this, but that solution (wait a week) didn't work for me.
So i have 2 servers, RDS01 and RDS02 with both 15 Hyper-V VM's and replicating to eachother. That part works fine.
Now I wanted to make it easy for my users I build a Connection Broker: RDCB
All went fine in that setup, but when I want to add the existing VM's from RDS01 and RDS02 to the collection it just radomly adds running ones and replicated ones.
So both RDS01 and RDS02 have 15 VM's running and 15 replica's in stopped state, but when I look in my collection, it says RDS01 has 23 and RDS02 has 7 VM's. When I add them all, I see he wants to add a lot of stopped states replica's from RDS01 instead of
the running ones from RDS02.
How can I specify which one he should use? Or need I disable replication first, setup the whole RDCB collection thing, and then turn replication back on? Or does Hyper-V replication not work at all when used in a collection?
I hope someone can help out here. I'm googling and trying for 1,5 week now, but i can;t get it right.
Thanks in advance.

Hi Robin,
Thanks for your patience.
After you removed Replication from 1 machine on both RDS01 and RDS02, please restart that machine. After that, please add this machine to the RD collection again to test how the issue goes.
As we know, Hyper-V Replica provides asynchronous replication of Hyper-V virtual machines between two hosting servers. It is simple to configure and does not require either shared storage or any particular storage hardware. Any server workload that can be
virtualized in Hyper-V can be replicated. Replication works over any ordinary IP-based network, and the replicated data can be encrypted during transmission. Hyper-V Replica works with standalone servers, failover clusters, or a mixture of both. The servers
can be physically co-located or widely separated geographically. The physical servers do not need to be in the same domain, or even joined to any domain at all.
Currently, would you please add only running state VMs to the RD CB collection? And would you please capture some screenshots of the error message? Thanks very much for your cooperation.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

How to configure SMTP server for osb 10.3.1

Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!

Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something.

How to remove leading zeros for an item number within quickviewer

how to remove leading zeros for an item number within quickviewer. Pls help

ask your abap guy to do it. not portal guys business.

Help, how do i find out the host server for a website i have inherited

hi i inherited responcibilty for a website, simply because
there was noone else avalable. i have dreamweaver cs3, but only
about 2 weeks worth of knowledge and experience. I was given info
ie. ftp address and username etc, so have been able to download the
website to my home computer, and have been making updates, now
however i need to find out more about setting up a test server so i
can use dynamic pages, specifically for collecting form
information, collecting donations and selling art work. i will need
some information from the host server to start with, but am unsure
as how to identify and contact them, can anyone help me please. I
am sure it is rudimentary, but the information is essential.
also as a side note, could anyone tell me how to find out
where the websites domain name is regestered ( other than
contacting the original designer, as that seem quite impossible)
because i get the feeling that if all else fails i may be able to
move the website to another host ( not that i now how yet, or even
how to select or find a host) please let me know if any of my
assumptions are wrong.
Thanking you in advance
J
volunteer.

Hi,
To find out about the host, go to register.com and look up
the domain name.
When it gives you results, it'll say that the name is already
taken, but it
will let you do a 'whois' on it.
Those results can give you some info such as the server DNS.
That may let
you figure out the host.
Sometimes the technical contact in the whois, is the host as
well.
"nsfwebnewbie" <[email protected]> wrote in
message
news:fmo8cf$3l5$[email protected]..
> hi i inherited responcibilty for a website, simply
because there was noone
> else
> avalable. i have dreamweaver cs3, but only about 2 weeks
worth of
> knowledge and
> experience. I was given info ie. ftp address and
username etc, so have
> been
> able to download the website to my home computer, and
have been making
> updates,
> now however i need to find out more about setting up a
test server so i
> can use
> dynamic pages, specifically for collecting form
information, collecting
> donations and selling art work. i will need some
information from the host
> server to start with, but am unsure as how to identify
and contact them,
> can
> anyone help me please. I am sure it is rudimentary, but
the information is
> essential.
> also as a side note, could anyone tell me how to find
out where the
> websites
> domain name is regestered ( other than contacting the
original designer,
> as
> that seem quite impossible) because i get the feeling
that if all else
> fails i
> may be able to move the website to another host ( not
that i now how yet,
> or
> even how to select or find a host) please let me know if
any of my
> assumptions
> are wrong.
>
>
> Thanking you in advance
>
> J
> volunteer.
>
>

How to specify page encoding for XML reports.

Hi,
Environment: Apps:11.5.10, Oracle Reports: 10g
I'm trying to generate XML tags by using a "rdf" report (10g).
Initially I generated the XML tags before moving the report to server. In the output file I got
<?xml version="1.0" encoding="WINDOWS-1252"?>
Then I moved the report to server and made the concurrent program output to XML.
In the concurrent program output the tag is
<?xml version="1.0" encoding="&Encoding"?>
The output shows error
===============
XML Parsing Error: XML declaration not well-formed
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
<?xml version="1.0" encoding="&Encoding"?>
Its clear that there is something wrong with page encoding format which has to get assigned while run time. But its not happening so.
How to specify the page encoding format?
Any help would be appreciated.
Thank you
BKR.
Edited by: BalaKrishna Reddy Avuthu on Aug 14, 2009 2:00 PM

Remove the encoding so it says:
<?xml version="1.0"?>
Also, you will get a similar error if your xml tags for fields contain any special characters like & or #.

How to configure mail server for subscription

Hi,
I want to test subscription. My problem is how to configure the mail server.
As to my understanding, we need first configure mail server, then the user can choose "Subscribe" in the Details screen of a folder.
My steps are:
1. In KM - CM - Utilities - Channels, specify SMTP server, userId and password.
2. In KM - CM - Utilities - Channel originators, set the Original address for notificator.EMAIL.
3. In KM - Collaboration - Groupware Transport - Mail Transport, specify SMTP server and sent message folder.
After that, when I choose a user and click "Send email", it failed saying "Failed to communicate with SMTP server when sending the email.".
Could anyone tell me what's wrong with my configuration, or what should I do to make subscription work?
Thanks,
Ray

Hi Vineeth,
Thanks for help.
According to your steps:
1. set up a mail transport and making notification and mailing service active.
In System admin - KM - CM - Global services, I've enabled Inbox, Mailing and Notification services.
In KM - CM - Collaboration - Groupware Transport, I've set up a mail transport:
Name: JavaMailTransport
SMTP Server: smtp.yahoo.com
Sent message folder: /documents
System alias name: mytransport
2. Give everyone read permission on notifications in KM.
Where can I set user's permission on notifications? I think you mean folder /etc/notifications, but I don't know how to set permissions.
3. Check if proper id's are maintained in users profile.
How to do this?
Thanks for help~~
Regards,
Ray

Oracle Portal Virtual Host Enhacement for Multiple Virtual Hosts

I open the TAR Number: 4326752.996
The TAR is related to " REQUEST ASSISTANCE FOR MULTIPLE VIRTUAL HOSTS AND MULTIPLE PAGE GROUPS CONFIG. "
This is the Scenario: We Have Oracle Portal installed in a single Box. yes I know I know... but Not everybody is Yahoo or Google for Clusters and all the good stuff, we just want our website managed by Oracle Portal since all our ERP is running Oracle Database. Anyway. 1 Box running Oracle Portal Infrastructure and MidTier.
It turns out that our previous configuration we have the LAMP Solution with PHP, Apache with Virtual Servers configuration very trivial for a regular web server however we have about 6 Virtual domains.
For example:
www.abc.com
www.def.com
www.ghi.com
www.jkl.com
www.mno.com
www.pqr.com
We also like to post all our Intranet Information in this great Portal:
http://intranet.com
Where intranet.com is the same server but setup in our Internal DNS without be a Real Internet Register Domain.
So bottom line we start doing great with Install our single box install, later [GRRRRRR does not come by default in port 80 GRRRRRR, ok need to move and setup the virtual host to resolve our main External website www.abc.com ]
For starters ok it worked we have our main website running Oracle Portal.
Now is time to go to the step number 2.
Setup another Page Group in Portal to be the Page_Group_INTERNAL.
I figure if Apache can setup Virtual Hosts pointing to Independent parts of the File System without be shared. I was expecting some kind of custom configuration where I can setup httpd.conf to point to some specific PageGroups to make sure
www.abc.com => Page_Group_External
never share information with:
intranet.com => Page_Gorup_Internal
My TAR was very quick closed with the Argument that is not what It supposed to do.
Since a virtual host is a common thing to do on Linux and Apache, I wonder if You guys could list this as one of the default features to have multiple virtual domains assosiated with Page Groups that they never talk or share Resources I think that would be really great.
In the mean time I guess we have no option but to put a password for every internal page or take the risk of share our Information to the Internet. Perhaps designate another box with Oracle Portal but In that case Is not really cost/bennefit to use a killer technology for our external site since we just have no more than 30 pages.
Anyway just figure drop you guys a note any advise will be really appreciated.
Best Regards Dino.

Hi Martin,
1. To change the target URL of KM resources you can to the following:
Access the URL Generation Service Configuration by navigating to:
System Administration -> System Configuration -> Knowledge Management -> Configuration
Content Management -> Global Services -> URL Generator Service
Change the Host property to "portal.company.com".
2. You change the Port by opening the Visual Administrator and going to : Dispatcher -> Services -> HTTP Provider
Change there the "Ports" entry from (Port:50000,Type:http)to (Port:80,Type:http). Then go on "Save".
3. To remove the "/irj" from the portal URL you can create a index.jsp with the following content, and save it in the J2EE Documentation folder:
<Drive>:\usr\sap\<SAPSID>\JC<J2EE_instance_number>\j2ee\cluster\server0\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root
<%
//Send the redirect using server redirection (not client script)
//This will also send the HTTP GET parameters
String queryString = request.getQueryString() ;
if (queryString==null ) {
response.sendRedirect
("irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default") ;
} else {//redirect with HTTP GET parameters
response.sendRedirect
("irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default?" + queryString) ;
%>
Hope this helps,
Robert

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to specify PACKAGE SIZE for to RFC_READ_TABLE from PyRFC?

I'm trying to use PyRFC to extract large tables via RFC_READ_TABLE (due to an uncooperative/unsupportive basis team).
I know that RFC_READ_TABLE supports calling it with PACKAGE SIZE since ERPConnect does it by default.
In Python for Basis (Part 1), I learned how to specify an Open SQL where clause using the OPTIONS:
result = connector.call('RFC_READ_TABLE',
                       QUERY_TABLE=tablename,
                       DELIMITER=delimiter,
                       OPTIONS = [{'TEXT':where_clause}])
Is there a way, and how to specify PACKAGE SIZE in this case?
Thanks

Hi,
the package size works, but you need to call the function module multiple times in a loop. Here's an excerpt of the attached script:
recordcounter = 1          #needs to be >0 to get the while loop going
iteration = 0              #the number of times the function module got called
while recordcounter > 0: #as long as the function module calll returns rows...
    tempresult = self.call('RFC_READ_TABLE',
                            ROWSKIPS=iteration*fetchsize, #defines the number of rows to skip
                            **parameters)
    iteration=iteration+1 #increase the iteration
    data = tempresult['DATA']    #assign the returned rows to a variable
    if len(data) > 0:      #have there been any rows?
        for row in data:      #Do something with them
    else:
        recordcounter=0    #set recordcounter to 0 to end the while loop.
The script is far away from being perfect. It doesn't deal with RAW fields and the data types it returns are all strings. It does what I needed it to do but it may not be sufficient for what you may be trying to achieve.
Best regards
Lars

How to create a notification for new virtual machines created on Hyper-v Using SCOM or another way?

Hi ,
We need to to create a notification for new virtual machines created on Hyper-v Using SCOM or another way
thanks

http://sincealtair.blogspot.com/2010/04/how-to-ask-questions-in-technical-forum.html
Not nearly enough information.
If you are asking about SCOM, it is better to ask in the SCOM forum -
http://social.technet.microsoft.com/Forums/en-US/home?forum=operationsmanagergeneral
.:|:.:|:. tim

How to active Name Server for NWDI

Hello,
I would you to activate name server for ou nwdi.
The SLD is not installed on nwdi, we use a dedicated SLD Server. The SLD url is filled in the development configuration in CM Services.
From the SLD, in the reservation name part, the "Enable this SLD as name Server for NWDI" button is not available :
I have tries to follow this tutorial, but it is designed for netweaver 7.0 :
http://help.sap.com/saphelp_nw70/helpdata/en/2f/a72f41b239a831e10000000a1550b0/content.htm
Does anyone know how to activate this feature ?
I refer to this button :
Thank for help.

Thanks Irwin !
The button is shown now.
But in the landscape link, our nwdi system did not listed :
I have had one of my nwdi system, choose "add system" in systems tab.
But there is no option :
Thanks

How to specify overflow clause for IOT

Hi,
I’m using OSDM v3.0.0.665
How do I specify ‘overflow’ clause for index organized table (IOT)?
I need to generate DDL something similar to this “ create table T1(…….) organization index..overflow".
In OSDM, when I open physical model and table properties ‘IOT properties’ tab, I can see dropbox for overflow segment but no values in drop box, it is blank.
I do have tablespace created in my physical model.
I’m able to generate DDL for IOT but does not have ‘overflow’ clause.
Thanks,
Vikas

David,
Thanks for your response.
After creating segment template, I’m able to generate overflow clause.
However I’m still not able to specify tablespace for both – IOT table and overflow segment.
If I specify tablespace for IOT (say T1) under ‘General’ tab and if I also specify overflow segment (with tablespace T2) under ‘IOT properties’ tab, I’d expect it to generate DDL with tablespace T1 for IOT and tablespace T2 for overflow.
However it generates DDL with overflow tablespace T1 and does not generate any tablespace clause for IOT. So, IOT is created in default tablespace for user.
I need DDL with tablespace clause for both – IOT as well as overflow segment.
Can you please help?
Also, how do I get rid of other storage clauses like PCTFREE, PCTUSED, MINEXTENTS, MAXEXTENTS etc..
Thanks,
Vikas

How to install http-server for already installed apex

Hi,
due to networkcardtroubles I have to reinstall http-server. i have copied marvel.conf and marvel/images.
i have already reinstalled http-server, getting the htttp://host:7777-page, and have copied marvel.conf (and marvel/images) to the right directory.
but if i go to http://host:7777/pls/htmldb the result is "page not found"
how to combine http-server with apex ?
any reaction will be appreciated
Leo

Jes,
[Sat Mar 17 10:32:09 2007] [notice] FastCGI: process manager initialized
[Sat Mar 17 10:38:57 2007] [notice] FastCGI: process manager initialized
[Sat Mar 17 10:39:02 2007] [error] [client 127.0.0.1] [ecid: 1174124342:169.254.78.194:1416:196:1,0] File does not exist: c:/oracle/product/10.1.0/htmldb/apache/apache/htdocs/pls/htmldb
What went wrong ? (These files - indeed - don't exist on my computer).
I reinstalled only http-server form the companion CD, not htmldb (assuming to get htmldb 1.5) . Do I have to reinstall both ?
Leo

How to Setup deducated server for FR Repoting and Consolidation

Hi experts,
We have an issue where running FR reports slow down HFM for users. We were thinking of dedication 1 server for FR reporting and another for consolidation. I read the 9.3.1 manual and it says it is possible to do that. However, no steps were provided.
Can anyone please shed some light on the steps we need to perform ?
Thnaks a lot for your help in advance

>
Hello!
I have downloaded the SPARC ISOs for Solaris 9 from
sun.com, and I have tried many times to set up Install
server (Solaris 9) for SPARC machines on an Intel PC,
but I always get the following error.
I take it you're running solaris x86 on that intel pc?
bash-2.05#
/cdrom/cdrom0/Solaris_9/Tools/setup_install_server
/export/home/sol-sparc/
ERROR: Install boot image
/cdrom/cdrom0/Solaris_9/Tools/Boot does not exist
Check that boot image exists, or use [-t] to
specify a valid boot image elsewhere.
bash-2.05# If you do a "cd /cdrom/cdrom0/Solaris_9/Tools/" and then do an "ls" do you see the Boot directory? Is there anything in that directory? That's the software 1/2 CD you're running that command from right?
Thanks,
Daryl

How effective is air server for pc with apple tv?

I am considering downloading air server for my PC to use with apple tv. Why should I do it and why shouldn't I do it?

AirParrot is an option.

How to specify Host Server for Replicated Virtual Desktops within RDVH Collection

Similar Messages

Maybe you are looking for