How to Specify the SMTP in case of https protocol

Hi.
i have some doubt...
i am going to develop the mailing application ,for sending the mail we need to specify the SMTP host right?
in my case suppose mail.server.com this is my SMTP host that we need to specify in the Code.
but but m this host uses the https Protocol menas...
it open the webpage with https://mail.server.com
not with http://mail.server.com...
please tell me my changes i need to do in the code.....or pls give me some code example for using this senario...
waiting for +ve response.
Thanks,
Ashu

Hi bshannon ,
Actually i am very new in this functionality.........
sorry i am not understnd what u want to say...
Please give me brief description for the same...........
Edited by: EJBUSER on Oct 3, 2007 6:24 AM

Similar Messages

  • How to setup the SMTP server in Oracle apps?

    Hi,
    How to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
    Thanks,
    Bijoy
    Edited by: user12070886 on Feb 6, 2013 4:26 AM
    Edited by: user12070886 on Feb 6, 2013 4:27 AM

    How to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? No, it is not mandatory. Also please note that the mails are sent out from concurrent manager mode. Not from the database node.
    Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
    >
    It depends on the operating system you are using. If you are using *nix then sendmail needs to be configured.
    Thanks

  • How to specify the target name while deploying a code in OSB-- Plz Help

    Hi all,
    Am working in creating a cluster environment. For my testing i created a new managed server(OSB_Server) in 9001 port in the admin console itself and that server started running. The default managed server(Admin_Server) is in 7001 port. So when i deploy a code in 7001 sb console the WSDL gets exposed in 7001 because the default admin server port is 7001. While deploying a code in service bus admin console we are not specifying the target name. So how to specify the target name while deploying the code in service bus admin console. Plz help me.
    Regards
    Prabhu

    Hi Prabhu,
    There are three kind of server architecture possible for OSB -
    1. Single server - Everything gets deployed on Admin server itself
    2. Admin Server + Single Managed Server for OSB -- OSB configuration gets deployed on OSB managed server. OSB resources (proxy service, WSDL, Schema) will remain available on OSB managed server port only and NOT on admin server port
    3. Admin Server + OSB cluster -- OSB configuration gets deployed on OSB cluster. OSB resources (proxy service, WSDL, Schema) will remain available on OSB Cluster port(s) only and NOT on admin server port
    Converting one type of server architecture to any other type, requires a manual tedious process, so it is suggested that you create domain accordingly i.e. if you need clusters then while creating domain itself, create OSB cluster, so that all OSB applications gets deployed to OSB cluster. I will suggest you to create a clustered domain from scratch and import the configuration from your existing domian to this new clustered domain.
    You may refer-
    http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15022/toc.htm
    Regards,
    Anuj

  • Numbers to CSV export script: how to specify the encoding?

    Hi,
    I'm using the following script to export a Numbers document to CSV:
    # Command-line tool to convert an iWork '09 Numbers
    # document to CSV.
    # Parameters:
    # - input: Numbers input file
    # - output: CSV output file
    # Attik System, Philippe Lang
    # Creation date: 31 mai 2012
    # Modification date:
    on run argv
      # We retreive the path of the script
              set myPath to (path to me)
              tell application "Finder" to set myFolder to folder of myPath
      # We get the command line parameters
              set input_file to item 1 of argv
              set output_file to item 2 of argv
      # We retreive the extension of the file
              set theInfo to (info for (input_file))
              set extname to name extension of (theInfo)
      # Paths
              set input_file_path to (myFolder as text) & input_file
              set output_file_path to (myFolder as text) & output_file
              if extname is equal to "numbers" then
        tell application "Numbers"
          open input_file_path
          save document 1 as "LSDocumentTypeCSV" in output_file_path
          close every window saving no
        end tell
              end if
    end run
    It works fine, except that I don't know how to specify the encoding of the text in the CSV file (Latin1, MacRoman, Unicode). This option is available in the export dialog of Numbers. Any hint on how to do that is welcome. (GUI Scripting?)
    Where can I find documentation on the iWork "vocabulary" available? Is there a definitive documentation somewhere? I tried to record an manual export in the script editor, without success. Script is more or less empty.
    Thanks!
    Philippe Lang

    A further note from Yvan. He's made some revisions to the script sent earlier.
    --{code}
    --[SCRIPT export to CSV with selected encoding]
    I added some features.
    (1) Defining the encoding thru the preferences file apply only if
    the application is not in use because the file is read only once in a session.
    A test urge you to quit Numbers if it is running.
    (2) info for is deprecated so it may be removed by Apple tomorrow.
    I no longer use it.
    (3) just for the fun, I added a piece of code allowing you to select the encoding on the fly.
    Thanks to the property chooseEncodingInScript, at this time the script use Unicode (UTF-8)
    (4) I'm wondering which tool is used to launch this script,
    I don't know the way to pass arguments when I run one.
    Yvan KOENIG (VALLAURIS, France)
    2012/06/13
    property chooseEncodingInScript : false
    true = the script will ask you to select the encoding
    false = the script use the embedded encoding
    on run argv
      set input_file to (item 1 of argv) as text
      set output_file to (item 2 of argv) as text
      set myPath to (path to me) as text
              tell application "System Events"
      set theProcesses to name of every application process
      set myFolder to path of container of (disk item myPath)
      set input_file_path to myFolder & input_file
      set output_file_path to myFolder & output_file
      set extname to name extension of (disk item input_file)
      end tell
              if extname is "numbers" then
                        if "Numbers" is in theProcesses then error "Please, quit “Numbers” before running this script !"
      if chooseEncodingInScript then
                                  set theList to {"Mac OS Roman", "Unicode (UTF-8)", "Windows Latin 1"}
                                  set maybe to choose from list theList with prompt "Choose the default encoding applying to export as CSV"
      if maybe is false then
      error number -128
      else if item 1 of maybe is item 1 of theList then
                                            30 -- Mac OS Roman
      else if item 1 of maybe is item 2 of theList then
                                            4 -- Unicode (UTF-8)
      else
                                            12 -- Windows Latin 1
      end if
      else
                                  4 -- Unicode (UTF-8)
      end if
                        do shell script "defaults write com.apple.iWork.Numbers CSVExportEncoding  -int " & result
      tell application "Numbers"
      open input_file_path
                                  save document 1 as "LSDocumentTypeCSV" in output_file_path
      close every window saving no
      end tell
      end if
    end run
    --{code}
    Regards,
    Barry

  • How to specify the type of table in the form parameters

    How to specify the type of table in the form parameters. for example, how to specify the type of table "vacancies".
    FORM getcertainday
                       USING
                       vacancies TYPE STANDARD TABLE
                       efirstday LIKE hrp9200-zfirst_day
                       lfristday LIKE hrp9200-zfirst_day.

    Hi
    Are you asking about subroutine program to declare a variable for perform statement etc
    if it so check this coding
    DATA: NUM1 TYPE I,
    NUM2 TYPE I,
    SUM TYPE I.
    NUM1 = 2. NUM2 = 4.
    PERFORM ADDIT USING NUM1 NUM2 CHANGING SUM.
    NUM1 = 7. NUM2 = 11.
    PERFORM ADDIT USING NUM1 NUM2 CHANGING SUM.
    FORM ADDIT
           USING ADD_NUM1
                 ADD_NUM2
           CHANGING ADD_SUM.
      ADD_SUM = ADD_NUM1 + ADD_NUM2.
      PERFORM OUT USING ADD_NUM1 ADD_NUM2 ADD_SUM.
    ENDFORM.
    FORM OUT
           USING OUT_NUM1
                 OUT_NUM2
                 OUT_SUM.
      WRITE: / 'Sum of', OUT_NUM1, 'and', OUT_NUM2, 'is', OUT_SUM.
    ENDFORM.
    If your issue is some other can u explain me clearly
    Regards
    Pavan

  • How to configure the smtp server..

    i had an error when running the java mail program..
    this is my program
    import javax.mail.*;
    import javax.mail.internet.*;
    import javax.activation.*;
    import java.io.*;
    import java.util.Properties;
    public class MailClient
    public void sendMail(String mailServer, String from, String to,
    String subject, String messageBody,
    String[] attachments) throws
    MessagingException, AddressException
    // Setup mail server
    Properties props = System.getProperties();
    props.put("mail.smtp.host", mailServer);
    // Get a mail session
    Session session = Session.getDefaultInstance(props, null);
    // Define a new mail message
    Message message = new MimeMessage(session);
    message.setFrom(new InternetAddress(from));
    message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
    message.setSubject(subject);
    // Create a message part to represent the body text
    BodyPart messageBodyPart = new MimeBodyPart();
    messageBodyPart.setText(messageBody);
    //use a MimeMultipart as we need to handle the file attachments
    Multipart multipart = new MimeMultipart();
    //add the message body to the mime message
    multipart.addBodyPart(messageBodyPart);
    // add any file attachments to the message
    // addAtachments(attachments, multipart);
    // Put all message parts in the message
    message.setContent(multipart);
    // Send the message
    Transport.send(message);
    protected void addAtachments(String[] attachments, Multipart multipart)
    throws MessagingException, AddressException
    for(int i = 0; i<= attachments.length -1; i++)
    String filename = attachments;
    MimeBodyPart attachmentBodyPart = new MimeBodyPart();
    //use a JAF FileDataSource as it does MIME type detection
    DataSource source = new FileDataSource(filename);
    attachmentBodyPart.setDataHandler(new DataHandler(source));
    //assume that the filename you want to send is the same as the
    //actual file name - could alter this to remove the file path
    attachmentBodyPart.setFileName(filename);
    //add the attachment
    multipart.addBodyPart(attachmentBodyPart);
    public static void main(String[] args)
    try
    MailClient client = new MailClient();
    String server="smtp.canvasindia.com";
    String from="[email protected]";
    String to = "[email protected]";
    String subject="Test";
    String message="Testing";
    String[] filenames ={"c:/A.java"};
    client.sendMail(server,from,to,subject,message,filenames);
    catch(Exception e)
    e.printStackTrace(System.out);
    the error is .................
    javax.mail.SendFailedException: Invalid Addresses;
    nested exception is:
    com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected from p
    ool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
    at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
    at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
    at javax.mail.Transport.send0(Transport.java:169)
    at javax.mail.Transport.send(Transport.java:98)
    at MailClient.sendMail(MailClient.java:47)
    at MailClient.main(MailClient.java:84)
    Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected fro
    m pool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
    at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
    ... 5 more
    how to configure the smtp server in my machine..
    please guide me...

    This uses gmail account, and gmail smtp
    * MailSender.java
    * Created on 14 November 2006, 17:07
    * This class is used to send mails to other users
    package jmailer;
    * @author Abubakar Gurnah
    import javax.mail.*;
    import javax.mail.internet.*;
    import java.util.*;
    public class MailSender{
        private String d_email,d_password;
         * This example is for gmail, you can use any smtp server
         * @param d_email --> your gmail account e.g. [email protected]
         * @param d_password  --> your gmail password
         * @param d_host --> smtp.gmail.com
         * @param d_port --> 465
         * @param m_to --> [email protected]
         * @param m_subject --> Subject of the message
         * @param m_text --> The main message body
        public String send(String d_email,String d_password,String d_host,String d_port,
                String m_from,String m_to,String m_subject,String m_text ) {
            this.d_email=d_email;
            this.d_password=d_password;
            Properties props = new Properties();
            props.put("mail.smtp.user", d_email);
            props.put("mail.smtp.host", d_host);
            props.put("mail.smtp.port", d_port);
            props.put("mail.smtp.starttls.enable","true");
            props.put("mail.smtp.auth", "true");
            //props.put("mail.smtp.debug", "true");
            props.put("mail.smtp.socketFactory.port", d_port);
            props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
            props.put("mail.smtp.socketFactory.fallback", "false");
            SecurityManager security = System.getSecurityManager();
            try {
                Authenticator auth = new SMTPAuthenticator();
                Session session = Session.getInstance(props, auth);
                //session.setDebug(true);
                MimeMessage msg = new MimeMessage(session);
                msg.setText(m_text);
                msg.setSubject(m_subject);
                msg.setFrom(new InternetAddress(m_from));
                msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
                Transport.send(msg);
                return "Successful";
            } catch (Exception mex) {
                mex.printStackTrace();
            return "Fail";
        //public static void main(String[] args) {
        //    MailSender blah = new MailSender();
        private class SMTPAuthenticator extends javax.mail.Authenticator {
            public PasswordAuthentication getPasswordAuthentication() {
                return new PasswordAuthentication(d_email, d_password);
    }

  • How to specify the database file path when create FDM application

    Dear All,
    How to specify the database file path (MSSQL) when create FDM application?
    Right now, all data file are placed in the D:\ . I want to specify the database files (log and mdf file) in other place. How to do it?
    Thanks.

    Where is the highS2.xml located on the disk? If you add it to your project you should set its Build Action to Content and its Copy To Output Directory to Always in Visual Studio:
    Please remember to close your threads by marking helpful posts as answer once your issue has been solved and then start a new thread if you have a new question.

  • How to specify an SMTP port rather than 25 in JavaMail?

    This is my segment of code, but I don't know where I can specify the SMTP port. Please help me.
    Properties props = System.getProperties();
    props.put("mail.smtp.host", "smtp.mail.yahoo.com");
    Session session = Session.getDefaultInstance(props,
        new MyAuthenticator("dxxvi", "nopassword"));
    MimeMessage message = new MimeMessage(session);
    message.setFrom(new InternetAddress("[email protected]",
                                        "Thai Dang Vu"));
    message.addRecipient(Message.RecipientType.TO,
        new InternetAddress("[email protected]"));
    message.setSubject("I test the Yahoo! Mail Plus service");
    message.setSentDate(new Date());
    Multipart multipart = new MimeMultipart();
    BodyPart bodyPart = new MimeBodyPart();
    bodyPart.setText("If you can read this, $19.99/year is worthy");
    multipart.addBodyPart(bodyPart);
    bodyPart = new MimeBodyPart();
    bodyPart.setDataHandler(
        new DataHandler(new FileDataSource("Resume.doc")));
    bodyPart.setFileName("Resume.doc");
    multipart.addBodyPart(bodyPart);
    message.setContent(multipart);
    Transport.send(message);

    props.put("mail.smtp.port", "42");

  • How to extract the smtp response code

    Hi,
    I am trying to get the server response by SMTPTransport.getLastServerResponse(),
    and getting the response as "250 2.0.0 OK 1201842889 c39sm4983397anc.25", in case of success.
    This response would differ in case of failure.
    Could please guide me as how to extract the response code from the result.
    Thanks!!

    It's time to read the SMTP spec.
    Also, read the javadocs for the com.sun.mail.smtp
    package to see how to get an Exception even for
    success that includes the detailed response codes.
    The smtpsend.java demo program will show you how
    to interpret the exception.

  • How to specify the AI version which file shall be compatible with?

    With AI 12.0.0 I need to save AI files so that they are compatible with AI version 10.
    Adobe help Center says:
    "Illustrator format options: When you save artwork to Illustrator format, you can set the following options: Version
    Specifies the version of Illustrator with which you want your file to be compatible."
    However, when I try to save the AI file I see no format options at all, so I cannot specify the desired AI version.
    How do I get access to the saving options?
    Arnold

    In AI 12 (CS2), you do not
    export, you
    save as. (The 'export' dalliance was instituted for v11 and abandoned for V12 as too confusing.)
    At the first save dialog (wherein you give your file a name), hitting 'Save' should get you to a second dialog. Choose the version you desire from the dropdown at top:

  • SQL Server 2012 Management Studio: XML XQuery-query the XML Blob using CTE: How to specify the coorelation name in bulk rowset?

    Hi all,
    I just started doing the XML Xquery programming in my SQL Server 2012 Management Studio. I executed the following code:
    --query the XML Blob using a CTE (pulling from the XML file each time) Products
    WITH XmlFile (Contents) AS (
    SELECT CONVERT (XML, BulkColumn)
    FROM OPENROWSET (BULK 'H:\Products.xml', SINGLE_BLOB) ) AS XmlData
    SELECT *
    FROM XmlFile
    GO
    I got the the following Msg:
    Msg 491, Level 16, State 1, Line 4
    A correlation name must be specified for the bulk rowset in the from clause.
    How can I specify the correction name for the bulk rowset in my project?
    Please kindly help, advise and respond.
    Thanks in advance,
    Scott Chang

    Hello Scott,
    You have to assign a table alias for the OPENROWSET =>
    --query the XML Blob using a CTE (pulling from the XML file each time) Products
    WITH XmlFile (Contents) AS (
    SELECT CONVERT (XML, BulkColumn)
    FROM OPENROWSET (BULK 'H:\Products.xml', SINGLE_BLOB) AS MyXML ) AS XmlData
    SELECT *
    FROM XmlFile
    GO
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • How to specify the font in a JList?

    My application has four columns of data represented in a JList. The default font style does proportional spacing.
    I need to specify a fixed width font to control column alignment in the JList. Unless there's something like tab positions? If I can specify a fixed width font, I can format the display strings appropriately.
    I think I need to use a cell renderer to control the actual drawing of each cell in the JList?
    Also, where do I find a list of the font types?
    Thanks in advance!

    I don't think you need a cell renderer. You find out how to specify font names by (oddly enough) looking in the API documentation for the Font class; the info for the most usable-looking constructor tells you what you want to know.

  • How to Specify the environment variable JCE_POLICY_ZIP and restart

    Hello All,
    I am installing the ABAP SAP NetWeaver 7.01 SR1 ABAP Trial Version.
    sapinst.exe installed successfully.
    I am installing the sapinstgui.exe but I got the following message:
    Program is starting... Please wait!
      Path: C:\Users\George\AppData\Local\Temp\sapinst_exe.6220.1246290325
    jre\bin\java.exe
    For the requested processing mode java policy
    files within the used SAP JVM are needed.
    Specify the environment variable JCE_POLICY_ZIP and restart.
    See also SAP note 1238121.
    Exit status of child: 10
    JRE is installed in C:\Program Files\Java\j2re1.4.2_19
    How do I specify the environment variable JCE_POLICY_ZIP?
    Thanks
    George
    Edited by: George King on Jun 29, 2009 9:01 PM

    Hi everyone,
    I had the same problem and found the solution !
    I was trying to setup the GUI thanks to sapinstgui.exe from the trial download folder and I got the exact same message,
    The problem is not the policies but the installation file.
    The installation file for the GUI is located at :
    <extract_folder_SAP_trial_version>\GUI\SAP_GUI_FOR_WINDOWS(...)\SAP_GUI_for_windows_(...)_Components.exe
    Hope it helps !
    Nicolas

  • Can not specify the SMTP server port, username and password for my SharePoint 2013 web application

    We have our SMTP server under port number 141 and we should add username and password. but inside SharePoint 2013, I can only define the SMTP server name , from email, reply-to . But there are not fields to define the port number , the username and password.
    So can anyone advice from where I can define the port number and other field settings for the SMTP server ?
    Thanks

    i am no sure about user name and password. i never saw that option.
    check this guide:
    http://blogs.technet.com/b/tirumals/archive/2012/03/17/step-by-step-configuration-of-outgoing-emails-from-sharepoint-to-microsoft-online.aspx
    http://blog.fpweb.net/configuring-an-smtp-server-for-sharepoint/#.UuANoxAo6M8
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
    thanks for the reply, but in our case the SMTP is  a separate server , and to connect to it i need to define the ; server IP /Name , port number, username & password. but in SharePoint there is no option to define the port number , and the links you
    provide are regarding configuring SMTP server, while we already have an SMTP server but i need to connect SP with it . can you advice please?

  • How can specify the max width of uix pages in a browser

    If I have 7 tabs in my jheadstart application. This
    works fine on a 1200X1000 resolution but on a
    1024X720 resolution the users have a scrollbar
    how can i specify the max resolution in jheadstart

    Tnx Steven "God" Davelaar ;-)
    Edwin:
    When you are about to edit the tab-bars (any level),
    make sure you disable the tabbar generation (service-
    level). Each uix-page calls this tabbar with a parameter
    for selected-tab (0 to n). If you edit the *tabbar.uit
    and for example, merge 2 tabbars into 1 (with a level 2
    globalheader for further navigation), don't just delete
    the code in the uit-file, but simply set one of them to
    rendered=false (instead of
    data:rendered=groupname@infoTable:something). This will
    not screw up the selected-tab settings on all pages where
    the selected tabbar is on the right (higher number) of
    your merged one.
    And have fun with UIX (I know you will)

Maybe you are looking for