How to specify what is displayed for dimension members in the Crosstab

Is there a way to programatically specify what the Crosstab displays for each dimension member. I want to be able to switch between the short label and long label of the member data. Thanks

Hi,
At the moment there is no facility to do this. However, the next version of BI Beans which will be shown at Oracle World in September should have this capability.
Hope this helps
BI Beans PM Team
Oracle

Similar Messages

  • Profile Manager Settings for Group does not display for individual members of the group

    Hi there,
    Can anyone confirm whether I am going mad or not, I and new to Mac Server and have set up Profile Manager on OSX Mavericks from scratch and have been using it successfully to deploy enterprise iPads. I have just gone to edit the profile as we wish to increase the timeout time to locking and have been greeted with something strange.
    We have all users in a Group which has settings applied for timeout, pass code change etc. however if I go to an individual account who is part of that group then it isn't showing any settings for that user and it would appear I need to set them again. Similarly if I go to a device belonging to a member of the group then its not showing any settings for that device.
    I would have assumed that if you set restrictions for a group then when you view the restrictions for a member of the group then it would be the same however it appears that you can have a separate payload for a group. Is this the case?
    I am grateful for any advice people can give me.
    Thanks again.
    Rob

    I would have assumed that if you set restrictions for a group then when you view the restrictions for a member of the group then it would be the same
    That was never the way it worked in older versions of 10.3, 10.4, 10.5, 10.6 Server.
    The restrictions for a Group were shown for a Group. The restrictions for a User (alone) were shown for that User.
    And the advantage is that if you see something wrong for a single user, you might be tempted to fix it there, in that user, and when you had changed six of them, you might remember that you meant that to be a group setting after all.
    And the software to implement them separately is simpler, but YOU have to test it to find out the end results of compositing Group and User settings.

  • So how to specify different answer file for different install images in WDS snap-in?

    hello
    in WDS snap-in, in properties on server name, on client tab, we can define an answer file for unattended windows installation on WDS clients.
    my question is, maybe we have added multiple images in WDS snap-in (win xp image, win 7 , win 2008,...)
    now this one answer file applies to all of them ?
    so how to specify different answer file for different install images in WDS snap-in?
    thanks in advanced 

    Under the "Client" tab of WDS, you should only use an answer-file with settings relevant for the installation. This would be credentials for the WDS deployment share, international settings used during the setup and possibly also destination drive
    details (if you want the installation to take care of partitioning the disk etc). The settings relevant for unattend-files used under "Client" would only be of those in phase 1 (WinPE).
    However, if you would like to have specific unattend file for every installation, e.g. Win7, Server 2008, Win 8 etc, you can browse to the image under "Install Images" under the image Groups. There you can select properties for every image and
    have a personal unattend-file.
    hi Joel
    very cool. thanks a lot, that really helped me.
    best regards

  • Valid Combinations for DImension Members

    Hi All,
    We have dimensions for Cost Center and Company code in one of our BPC Applications..Is there a way we can avoid users planning for incorrect combinations?
    E.g. -
    Valid Combinations  -
    Cost Center 1 >>>Company Code 1000
    Cost Center 2 >>>Company Code 2000
    In case the user selects Cost Center 1 & Company code 2000 in current view and enters plan values - the system should not allow the same...Is there a way to maintain valid combinations for dimension members (belonging to different dimensions) in BPC???

    Hi Shibu,
    It was just an example, to show you how to control the combinations. You might have to design it based on the exact business requirement.
    Please note that this wont be a straight-forward process, and you might have to use some VB macros to ensure you get, what you require.
    Lets say, based on the expansion, you have 5 company codes to be displayed in the template. You should, first, use an EVEXP function to list all the 5 company codes in some empty region of the template. Use a macro to concatenate all the 5 company codes separated by "|". Then, for the expansion on cost centers, you should again use a macro which will consider each of the 5 company codes at a time, and set the expansion to "P_COMPANY = ABC". Since you have 5 company codes, hence you will have 5 such combinations of member filter pertaining to each of the 5 company codes. Then you must concatenate them using "|", and this should be the memberset option for the cost center dimension.
    I understand that this is going to be a bit complex, but I dont see any other option.
    Hope this helps.

  • How to remove bullets and spacing for url links in the Related Links iview?

    I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor".
    All I need is to remove the bullets and increase some vertical spacing between the links.
    Currently, it looks like this:
    URL iView A
    URL Iview B
    I go through the whole section of Related Links properties, none of them seems to do what I want.
    Here are the list of properties in Related Link section (of Navigation Panel):
    Link Color
    Text Decoration of Link
    Hover Color
    Text Decoration of Hovered Link
    Initially, I thought "Text Decoration of Link" should be the right property I should look at. But there are a drop-down with 5 options: None, Underline, Blinking, Overline and Line-Through, which really can't achieve what I want.
    Thanks for advice.
    Kent
    Post with Diagram Illustration:
    <a href="http://sapnetweaverforum.blogspot.com/2006/11/how-to-remove-bullets-and-spacing-for.html">How to remove bullets and spacing for url links in the Related Links iview?</a>
    Message was edited by: Kent C.

    Hi, Kai.
    I checked the Related iView properties (URL Template), I don't see what layoutset it is really using. I am not sure, is that a layout set apply to the Related Link Iview?
    For the regular KM iView, I will see what Layout Set I want to apply, then I can go and change the properties (of layout coontroller, collection renderer & resource renderer)you mentioned. But for this Related Link iView, I really don't know. I guess it may be in the code itself.
    If there is a layout set for Related Link iView (or the place to apply layout set to it), can you point to me which one is that? (I did a search through the layout set names, I only find the AppQuicklinkExplorer (I used this for Dynamic Nav. Link iView before), if I can aply this layout set to Related Link iView, my problem will be solved.)
    Thanks for help.
    Kent

  • How long is it gonny take for me to download the latest update for my iphone5

    how long is it gonny take for me to download the latest update for my iphone5?

    iPhone 5 running iOS 6. Am I wrong?

  • How do I get serial numbers for computers bought in the last seven years? They have been stolen but I am not in the country. Can I do it remotely?

    how do I get serial numbers for computers bought in the last seven years? They have been stolen but I am not in the country. Can I do it remotely?

    Check here first, and use your AppleID:
    https://supportprofile.apple.com/

  • HT1338 Why isn't the file size displayed for software updates in the App Store?

    Why isn't the file size displayed for software updates in the App Store?
    My only internet connection is a tether to my iPhone.
    My limited bandwidth forces me to manage my data consumption - I am forced to "google" the file size of the software update so I can decide if I have the headroom in my data plan to take advantage of the update.

    If you click on the name of the Application in your Updates Available list,
    it will take you to the update Imformation for that App.

  • 7.5 NW: Uunable to delete dimension members from the entity dimension

    Hi,
    I would really appreciate a solution to this. We are planning on implementing an IFRS consolidation using the SAP IFRS Starter Kit. We have created a copy of the IFRS Starter Kit, without any data. In order to customise it for our purposes, we have decided to keep the sample dimension members in Accounts, Flow and AuditID but delete the data in other dimensions. We have managed to delete the sample dimension members from the Time,  Inter-company and Conoscope dimensions but are unable to do it for the Entity and RateEntity dimension.
    Can anyone please explain why this is happening? There is no data in the application and so, why is this happening? We are on Service Pack 5.
    Many thanks in advance.

    Hi,
    Before going into the BPFs, i am sure you would have already checked, I would do the following:
    -Try to process the entity dimension in offline mode. I have seen this happening with some dimenions  that i know there is absolutely no transaction action. Just check processing the entity in offline mode. Do not untick 'take the appset offline'.
    - You would have done this. Double check for the transaction data.
    - Regarding BPFs, its not easy to check this. we had this situation earlier. Please go into the backend and in se16 you will find all the BPF tables with UJB*
    There would around 10-12 such tables. Have alook in them. Not all tables need to be looked into. But please have a check there.
    - Also check if entity has been referenced to any other dimension. Its good to check if you have INTCO dimension to see if it is referenced there.
    Thanks,
    Sreeni

  • How to configure what is displayed in srfDocSnippet (Oracle Text Search)?

    I am using UCM 10gR3 with SiteStudio 10gR4. I installed the Oracle Text Search component and it is working well. One of the requirements for a search results page is the specific layout of the data displayed. srfDocSnippet returns a really ugly display if the search result return is just metadata. I didn't find any documentation in UCM on how to configure this display.
    How to you configure what is displayed in srfDocSnippet?
    Thank you,
    Ken

    How To get the Summary from CIS on Document Objects (Doc ID 837740.1)
    What is the Closest Equivalant toVdksummary option In Oracle Full Text Search (Doc ID 787173.1)
    those notes on MOS may help.

  • How to know what were line item dimensions

    Dear SDN,
    How to know what were made line item dimensions.
    Thankyou.

    Rahul,
    Go to the edit mode of your info cube and then check out your dimensions, there if the line item dimension check box is checked then it means that, that particular dimension is a Line item dimension.
    Regards,
    Gattu

  • How to get what's app for Nokia C2-03.

    There is no what's app for Nokia C2-03.
    Is Nokia planning to develop it for this model?
    I need it, so please let me know.

    hi mate,
    totally wrong place to ask. has nothing to do with Nokia. it is up to the developer whether they develop the app for a particular platform or not. you will need to ask WhatsApp and enquire with them regarding availability of WhatsApp for your device.

  • How to have a JComboBox display an item different from the one selected

    Hello,
    I have a JTable (single column). I have set this column cell editor to be a JComboBox...
    JComboBox stdComboBox = new JComboBox();
    TableColumn column_zero = stdTablewCombo.getColumnModel().getColumn(0);
            column_zero.setCellEditor( new DefaultCellEditor(stdComboBox) );I have added a lovString array say {"A", "B", "C") to this stdComboBox. However, when the user selects a value from this list, I need to display a value from another lovString array say {"1", "2", "3"}. So if the user selects A then 1 needs to be displayed.
    I have a TableModelListener on this table that is getting me the correct selected index for any of the JComboBoxes on any of the rows. But I am little lost on how to display the value from the 2nd list.
    Thanks.

    Yes...but do I do that in the TableModelListener ?
    This is what I've tried in the TableModelListener:
    public void tableChanged(TableModelEvent e)
             System.out.println(e.getSource());
               if(e.getType() == TableModelEvent.UPDATE)
                    TableModel model = stdTablewCombo.getModel();
                    int row = e.getFirstRow();
                    this.cellValue = ((String)model.getValueAt(row, 0));
                    if (cellValue != null)
                         this.selectedIndex = this.stdComboBox.getSelectedIndex();
                          System.out.println("Selected Index:" + this.selectedIndex);
                          if (this.selectedIndex >= 0)
                             String valueToSet = this.lovStringB[this.selectedIndex];
                             model.setValueAt(valueToSet, row, 0);
                          else
                               System.out.println("Value in cell is not from List");
                          }It returns the selectedIndex value allright.
    It sets the value of valueToSet string allright.
    it also does the model.setValueAt allright....but this triggers a tableChanged event and it goes back up - this is also fine. However, when it now comes back to the this.selectedIndex = , this again returns the index of the original selection and not a -1 (for values not in the ComboBox list). This makes it go into an infinite loop and gives me a StackOverflowError.
    Edited by: 799076 on Oct 10, 2010 9:41 AM
    Edited by: 799076 on Oct 10, 2010 9:49 AM

  • How to remove a network activity for one employee from the worklist?

    Hi,
    We are using the SAP project system where project resources are assigned network activities. In the worklist in the ESS timesheet, the assigned network activities are displayed for the employee. The problem is when several employees are assigned for a network activity, and one of them no longer should register hours on this activity. How can you remove the assignment (using dates etc.) for only one person so that the network activity no longer is present in his worklist in the timesheet?
    Regards,
    Petter

    Well for this pernr you need to have a special coding to check for network and pernr.
    other would be a simple way using cats0003 to validate data an employee records here you can have a individual check
    for this pernr that he doesnt record for this activity and throw an error when he does! this is simpler

  • How to get multiple output formats for each execution of the report?

    Hi,
    Is it possible to get multiple output formats for each execution of the report? If so can you provide some details?
    Thanks

    In Reports 6i, Reports Distribution was introduced. This allows you to run the report once and output to a number of destinations with a different format. It also allows you to distribute individual sections within a report to different destinations in different formats.
    The Destinations for a Report to distribute to are defined either in a distribution file and passed on the command line or inside of the report definition.
    To add a destination to the the report definition, bring up the property palette against the report object and then select the "Distribution" property under the "Report" node. This will bring up a dialog that allows you to create a distribution list. You can then test this list by selecting "file->distribute" from the menu.
    To run a report that is to be distributed through rwrun60, you need to add "distribute=yes" to the command line. It will pick up the destinations from the report definition. If you add "destination=<filename>" then it will pick up the destinations from the specified "<filename>" and ignore the destinations in the report definition.
    Note: if "distribute=yes" is specified on the command line then the destype/desname/desformat parameters will be used to format the report (ie: which printer/display to use during formatting for sizing objects) but will be ignored when the report is sent to the destinations.

Maybe you are looking for