How to specify which group members have wiki write permissions

In the 10.5 Workgroup Manager, Basic tab, there are two drop down boxes after the checked boxes for enbabling wiki, blog, mailing lists, web calendar, et al -
Allow [group members only | some group members | authenticated users | anyone]
to write to these services.
If I select "some group members" how do I actually say which group members? I see nowhere that I can specify that.
Specifically this is in regards to the wiki.

Unless I'm missing something, the directory.app only lets me do the same thing the Server Admin does, add people to a group and enable services to that group.
For example I have a group called Techs, they have a mailing list and wiki.
Some of the junior techs I only want to have read access, others write access.
I don't see how I can specify user1 has read only access but user2 and user3 have write access.

Similar Messages

How to specify which of 2 wifi cards to use

Hi All,
I recently installed Arch Linux on a USB (not live, a persistant installation). I have 2 wifi cards: one that came with the laptop and is used via PCIe, which is an Intel Centrino Wireless-N 2200. It's awful. The other, which is a USB wifi card and which I want to use, is an ASUS USB-N10. I checked linux-wless.passys.nl to see if the N10 was supported, and it said it was, and also said: "Supported by the rtl8192su and r8712u staging drivers in the mainline Linux kernel. Firmware from userspace is required." I can't get wifi working properly in Arch Linux, which makes it impossible to progress because I can't install anything and am stuck in just using terminal. I don't know how to specify which card to use in Arch. Any help would be much appreciated.
Thank you for your answers in advance!

After running ip addr, it doesn't display names for the different devices in a way that I can tell which ones they are. The names that it gave me are: "lo", "enp3s0", "wlp4s0", and "wlp0s20u2". I know that 2 of those are virtual ports for wireless devices that aren't being used, but I don't know how to differentiate.
EDIT: Also, when I try to navigate to etc/netctl/examples/wireless-wpa, it says "Correcting wireless-wpa to ."
EDIT 2: "lo" seems to be a generic interface, and I've narrowed down the names so now I know that my two wireless cards are 'wlp4s0" and "wlp0s20u2". When I ran iwconfig, I got
wlp4s0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key: off
Power Management: off
wlp0s20u2 unassociated Nickname:"rtl_wifi"
Mode:Auto Access Point: Not-Associated Sensitivity: 0/0
Retry:of RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
lo no wireless exentions
enp3s0 no wireless extensions
I'm assuming that this means that the latter two interfaces are the unused virtual interfaces. Does this tell you anything important?
Last edited by TheAtomicGoose (2014-04-07 21:05:28)

How to Specify Which Version of Rsync on Server Side

I have installed rsync 3.0.6 on both client and server side and know how to specify which version to use on the client side but am I right in assuming that if I don't specify some how on the server side it will use the version stored in /usr/bin/rsync? Do I have to move the version stored in /usr/local/bin/rsync to /usr/bin?
Thanks.

--rsync-path=PROGRAM specify the rsync to run on remote machine

How to specify which version of a function to use

I tried to do what it said, but that resulted in error
PowershellPS C:\WINDOWS\system32> Import-dscResource -ModuleName @{ModuleName="xPSDesiredStateConfiguration";ModuleVersion="3.4.0.0"}Import-dscResource : The term 'Import-dscResource' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.At line:1 char:1+ Import-dscResource -ModuleName @{ModuleName="xPSDesiredStateConfigura ...+ ~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (Import-dscResource:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException

A: How to specify which version of a function to use

(Btw: The Edge Web browser doesn't show the formatting toolbar in these text editors... I switched to IE to write this)I have this script and the problem is, there's two versions of xPSDesiredStateConfiguration in the wildTextconfiguration HTTPPullServer{ # Modules must exist on target pull server Import-DSCResource -ModuleName xPSDesiredStateConfiguration Node dc { WindowsFeature DSCServiceFeature { Ensure = "Present" Name = "DSC-Service" } WindowsFeature IISConsole { Ensure = "Present" Name = "Web-Mgmt-Console" } xDscWebService PSDSCPullServer { Ensure = "Present" EndpointName = "PSDSCPullServer" Port = 8080 PhysicalPath = "$env:SystemDrive\inetpub\wwwroot\PSDSCPullServer" CertificateThumbPrint = "AllowUnencryptedTraffic" ModulePath = "$env:PROGRAMFILES\WindowsPowerShell\DscService\Modules" ConfigurationPath = "$env:PROGRAMFILES\...

Under which group i have to post issues related to SAP - Basis

Hello All,
Can some one tell me
Under which group i have to post issues related to SAP - Basis
Thanks
Balaji

Hi,
As such there is forum which is dedicated to basis. But there are number of forum where you can post issues depending upon what type of issue you have e.g.
If you have issue related to database then you can post in SAP on Oracle, SAP on DB6, SAP on MaxDB etc.
If it is related to OS then SAP on Unix, SAP on window etc.
If it is related to ERP/EHP upgrade then SAP ERP 6.0 upgrade, Enhancement Package installation.
If its related to netweaver then on SAP Netweaver administrator, SAP netweaver platform.
Thanks
Sunny

How to select which RFC USERS have been accessed my host ?

Hi, guru
how to select which RFC USERS have been accessed my host ?
or how to record the RFC users's trace ?
because the auditor wants to know it.
Best regards,
Michael

how to select which RFC USERS have been accessed my host ?
did you check ST03N->User profile ?
or how to record the RFC users's trace ?
Check ST01 for system trace.

How to bulk add group members in Open Directory

So the workgroup manager interface is ghey. The + sign to add group members drag&drops users one at a time. I need to bulk add group members.
I tried ldapadd to add all the users quickly and that doesn't seem to work. The ldap group record now has all the users populated, under the multivalued attribute memberUid), but workgroup manager doesn't see the bulk group members.
Any idea how to do this?

Use tcsh SHELL builtin command 'foreach' to accomplish this:
$ tcsh
$ which foreach
foreach: shell built-in command.
$ foreach user (`cat users.txt`)
foreach? echo adding $user to group
foreach? /usr/bin/dscl -u diradmin -P [passwd] /LDAPv3/127.0.0.1 append /Groups/yourgroup GroupMembership $user
foreach? end

How to specify which cert to use for software virt server?

Is there a way to specify which certificate to use for each software virtual server? So, for example a user hitting https://somewhere.com would get the certificate for somewhere.com while the virtual server https://somewhereelse.com would use the certifcate with the name somewhereelse.com in it?

No, this is not possible due to limitations of the underlying protocols.
HTTP requests are sent over TCP connections which deal with IP addresses and port numbers (i.e. hardware virtual server properties), not hostnames (i.e. software virtual server properties). The HTTP protocol adds software virtual server support by allowing a client to identify the hostname (e.g. "www.iplanet.com") of the server it wishes to communicate with. This is achieved by including a "Host:" header with each HTTP request.
Unfortunately, the SSL/TLS protocols require that the web server present its SSL/TLS certificate BEFORE the client sends its HTTP request. Since the software virtual server information is contained in the HTTP request, it is not possible for the server to select different certificates for different software virtual servers.
You will need to use hardware virtual servers (i.e. virtual servers that have different IP addresses and/or port numbers) if you wish to use distinct SSL/TLS certificates.

Mac OS X v10.7 Lion How to Tell Which Groups an Address Book Entry Is In?

Under Snow Leopard's address book, I could press the Option key and it would highlight which groups the selected address book entry was in. How do I do that with Lion's address book?

Hey Mr. Picasso,
You need to be in "Groups" View in Address Book. Hit Command-3 to get there.
Then click (highlight) an address book entry on the right hand page.
Next, hit the Option key. The groups that the entry belongs to will highlight in blue on the left hand page.
BTW, to me the "highlight in blue text" is badly chosen by Apple, 'cause it is hardly discernable from the other "black on white" texts. No way to change it, AFAIK. The old "yellow highlight" worked much better, IMHO.
Regards, Peter

How to specify which Ethernet port on a Mac Pro to send an Ethernet packet

Hi,
I am doing some development on a Mac Pro. The Mac Pro has two Ethernet ports on the rear: Ethernet 1 and Ethernet 2.
I want to specify which of these ports I send a UDP Ethernet packet from.
In my code I currently create a socket and send data through this. This works fine, but the data (packet) always seems to come out of Ethernet port 1 on the rear of the Mac Pro.
So, how / where do I set in my code which port (Ethernet 1 or Ethernet 2) on the back of the Mac Pro to send my packet out of?
Cheers!
SkinnyC

It's ok, found this
http://lists.apple.com/archives/macnetworkprog/2008/Feb/msg00070.html

How to specify which pool in a multi-pool is primary?

Is it possible to specify which pool in a multi-pool is primary? Our backup
box has much less horsepower, so we'd like to make sure requests are sent to
the primary server. I don't see a deployment order in the web interface for
JDBC connection pools.
WebLogic 6.1 SP2
Oracle 8.1.7, soon to be 9.0.2.
TIA,
Eric

Eric F wrote:
So if my config.xml looks like this:
<JDBCMultiPool Name="eoprod" PoolList="prod,backup" Targets="console"/>
Then the primary will be prod?correct, sure thing.
Joe
>
>
Thanks.
"Joseph Weinstein" <[email protected]> wrote in message
news:[email protected]..
A basic multipool will always use the first pool in it's list.
Joe
Eric F wrote:
Is it possible to specify which pool in a multi-pool is primary? Our
backup
box has much less horsepower, so we'd like to make sure requests aresent to
the primary server. I don't see a deployment order in the web interfacefor
JDBC connection pools.
WebLogic 6.1 SP2
Oracle 8.1.7, soon to be 9.0.2.
TIA,
Eric

How to find which users only have a single and a specific responsibility

Hi,
I have a requirement in my organization that a password restriction have to be implemented. After implementing that, for some users, the password date will have to be nulled out, so that when they login, they will be forced to change their password following that new password rule.
Oracle's "CP SQL*Plus Expire FND_USER Passwords" concurrent program can not be used as that will expire all the users password at the same time.Use the same update statement in $FND_TOP/sql/AFCPEXPIRE.sql and include/exclude the usernames you want.
For this, I have to find all the users which have a certain responsibility (check viewing responsibility) and only that responsibility. First day password date null out will be implemented for them only. For the other users (who have check printing responsibility) the password will be nulled out some other day.
As I am using the following query, I see some of the users have multiple responsibility. How do I find out the users who have only a certain responsibility and nothing else?See (How To Find Out Which Responsibility Was Granted To A Specific User? [ID 304687.1]).
Or, see old threads for similar topic (you will find many queries which should be helpful).
http://forums.oracle.com/forums/search.jspa?threadID=&q=Users+responsibilities+query&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
select usr.user_name, res.responsibility_name
from apps.fnd_user usr, apps.FND_USER_RESP_GROUPS_DIRECT usrrep, apps.fnd_responsibility_tl res
where usr.user_id=usrrep.user_id
and usrrep.responsibility_id=res.RESPONSIBILITY_ID
and usr.end_date is NULL
group by usr.user_name,res.responsibility_nameTry this query ..
SQL> select fu.user_name, count(frvl.responsibility_name)
from fnd_user_resp_groups_direct furgd, fnd_responsibility_vl frvl, fnd_user fu
where furgd.responsibility_id = frvl.responsibility_id
and fu.user_id = furgd.user_id
and (to_char(furgd.end_date) is null
or furgd.end_date > sysdate)
group by fu.user_name
having count(frvl.responsibility_name) = 1;Thanks,
Hussein

How to show purchasing group members in the item data of the shopping cart?

Dear Experts,
for s shopping cart in SRM 7.0 CS, i have the following business requirement:
In the item data tab of the line item details, the drop down field for Purchasing group is there. Right to this field, there is also a link called "Show members".
If i go on this link, than a small table opens that obviously is there to contain such additional information about the purchasers like name, telephone nummber or extension.
Currently, this small table does not contain any of this additional information for any of the used purchasing groups.
Can you please help me understand, how and where i can maintain this information in the sytem, so it shows in the shopping cart?
Thank you very much for your help.

Hi,
thank you very much for the answer.
Actually, the question is not how to create the organizational unit of purchasing group in the PPOMA. This is all done. I just would like to understand, whether there is somewhere a place where i can maintain the name and maybe also the phone number of the buyer himself.
Thus, i would hope to see these details (i.e. the name and the phone number) in that small table that opens up if i click on the "Show members" link that is situated right to the purchasing group field in the "Item data" tab of the details of the line item.
Thank you.

[Solved] How to specify which version of Java to use?

I have OpenJDK 7 as my default, but I also am trying to use Oracle's Java 7 for a specific program. I have installed jdk7-compat as suggested by the arch wiki, but I am unsure how to use it specifically.
java -version outputs:
OpenJDK Runtime Environment (IcedTea 2.5.0) (Arch Linux build 7.u60_2.5.0-2-x86_64)
OpenJDK 64-Bit Server VM (build 24.60-b09, mixed mode)
so OpenJDK is still the default, which is good. At the same time, how do I use Oracle's Java for a specific program?
Last edited by TheGuyWithTheFace (2014-07-01 16:50:01)

You have to create a bash script to execute that program, where you define your Java variables. For example, let's supposed your oracle Java is installed at /opt/java_1.6.14/ folder
#!/bin/bash
export JAVA_HOME=/opt/java_1.6.14/
export PATH=/opt/java_1.6.14/bin:$PATH
<your command>
Last edited by mgmartins (2014-07-01 08:29:27)

How to determine which ipad I have by model number

How can I determine which ipad model I have by model number or serial number?

Put the serial number here: Decode Mac Serial Number or Lookup Mac Specs By Serial Number, Order, Model & EMC Number, Model ID @ EveryMac.com.

How to specify which group members have wiki write permissions

Similar Messages

Maybe you are looking for