How to Specify Which Version of Rsync on Server Side

I have installed rsync 3.0.6 on both client and server side and know how to specify which version to use on the client side but am I right in assuming that if I don't specify some how on the server side it will use the version stored in /usr/bin/rsync? Do I have to move the version stored in /usr/local/bin/rsync to /usr/bin?
Thanks.

--rsync-path=PROGRAM specify the rsync to run on remote machine

Similar Messages

How to specify which version of a function to use

I tried to do what it said, but that resulted in error
PowershellPS C:\WINDOWS\system32> Import-dscResource -ModuleName @{ModuleName="xPSDesiredStateConfiguration";ModuleVersion="3.4.0.0"}Import-dscResource : The term 'Import-dscResource' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.At line:1 char:1+ Import-dscResource -ModuleName @{ModuleName="xPSDesiredStateConfigura ...+ ~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (Import-dscResource:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException

A: How to specify which version of a function to use

(Btw: The Edge Web browser doesn't show the formatting toolbar in these text editors... I switched to IE to write this)I have this script and the problem is, there's two versions of xPSDesiredStateConfiguration in the wildTextconfiguration HTTPPullServer{ # Modules must exist on target pull server Import-DSCResource -ModuleName xPSDesiredStateConfiguration Node dc { WindowsFeature DSCServiceFeature { Ensure = "Present" Name = "DSC-Service" } WindowsFeature IISConsole { Ensure = "Present" Name = "Web-Mgmt-Console" } xDscWebService PSDSCPullServer { Ensure = "Present" EndpointName = "PSDSCPullServer" Port = 8080 PhysicalPath = "$env:SystemDrive\inetpub\wwwroot\PSDSCPullServer" CertificateThumbPrint = "AllowUnencryptedTraffic" ModulePath = "$env:PROGRAMFILES\WindowsPowerShell\DscService\Modules" ConfigurationPath = "$env:PROGRAMFILES\...

How to check which version of flash media server is installed on

Hi all.
Is there any way to check which version of flash media server is installed on my computer?

Hi Amit,
Thank you for your reply. But I still cannot find the information in the log files.
Flash meda server 3.5 has three versions: flash media Streaming server, flash media Interactive server and Development server. I would like to confirm which version above is installed on my computer. Is there a way to check for it?

[Solved] How to specify which version of Java to use?

I have OpenJDK 7 as my default, but I also am trying to use Oracle's Java 7 for a specific program. I have installed jdk7-compat as suggested by the arch wiki, but I am unsure how to use it specifically.
java -version outputs:
OpenJDK Runtime Environment (IcedTea 2.5.0) (Arch Linux build 7.u60_2.5.0-2-x86_64)
OpenJDK 64-Bit Server VM (build 24.60-b09, mixed mode)
so OpenJDK is still the default, which is good. At the same time, how do I use Oracle's Java for a specific program?
Last edited by TheGuyWithTheFace (2014-07-01 16:50:01)

You have to create a bash script to execute that program, where you define your Java variables. For example, let's supposed your oracle Java is installed at /opt/java_1.6.14/ folder
#!/bin/bash
export JAVA_HOME=/opt/java_1.6.14/
export PATH=/opt/java_1.6.14/bin:$PATH
<your command>
Last edited by mgmartins (2014-07-01 08:29:27)

How to check which version of hyperic is installed , hyperic 32 bit or 64 bit version on solaris

how to check which version of hyperic is installed , hyperic 32 bit or 64 bit version on solaris

If you have only a single home, the quickest/easiest way is probably just to check the properties of %ORACLE_HOME%\odp.net\bin\2.x\oracle.dataacess.dll
Or are you asking how to check it at runtime?
If you want to see externally what is actually loaded by an app you can use process explorer
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
If you want to check it in the app itself:
http://stackoverflow.com/questions/383686/how-do-you-loop-through-currently-loaded-assemblies
Hope it helps,
Greg

How to tell: Which version of camera raw do I have?

How to tell which version of camera raw I have? The only Google search I found answering this question refers to is 2 years old and seems to no longer apply. There is no File, Edit etc. menu on the new version of Camera Raw with (Photoshop/Bridge CS6). I do use Adobe Application Manager to do my updates telling me if a new version exists or not, nevertheless I would like to know.

The F key works as described for me in CS6-ACR7.4 with ACR as the window with focus. The same function is available using the double-arrow-window icon at the right of the Preview checkbox near the top right of the preview area.
When in full-screen mode there is no title bar, but when I press the F key or click the double-arrow, again, ACR becomes smaller and I can see the title bar that includes the ACR version and camera model. This is on Windows7-64-bit on a 1600x1050 monitor. Perhaps you’re ACR’s title bar is off the top of the screen so you can’t see it, or maybe ACR optimizes some things if you have a smallish display—do you?
A plug-in is a program that interfaces with another program but is not independently runnable application, itself, bit is independently updatable, so in this instance, Photoshop doesn’t need to be downloaded and installed every time Adobe adds support for a few more cameras.

How to specify which of 2 wifi cards to use

Hi All,
I recently installed Arch Linux on a USB (not live, a persistant installation). I have 2 wifi cards: one that came with the laptop and is used via PCIe, which is an Intel Centrino Wireless-N 2200. It's awful. The other, which is a USB wifi card and which I want to use, is an ASUS USB-N10. I checked linux-wless.passys.nl to see if the N10 was supported, and it said it was, and also said: "Supported by the rtl8192su and r8712u staging drivers in the mainline Linux kernel. Firmware from userspace is required." I can't get wifi working properly in Arch Linux, which makes it impossible to progress because I can't install anything and am stuck in just using terminal. I don't know how to specify which card to use in Arch. Any help would be much appreciated.
Thank you for your answers in advance!

After running ip addr, it doesn't display names for the different devices in a way that I can tell which ones they are. The names that it gave me are: "lo", "enp3s0", "wlp4s0", and "wlp0s20u2". I know that 2 of those are virtual ports for wireless devices that aren't being used, but I don't know how to differentiate.
EDIT: Also, when I try to navigate to etc/netctl/examples/wireless-wpa, it says "Correcting wireless-wpa to ."
EDIT 2: "lo" seems to be a generic interface, and I've narrowed down the names so now I know that my two wireless cards are 'wlp4s0" and "wlp0s20u2". When I ran iwconfig, I got
wlp4s0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key: off
Power Management: off
wlp0s20u2 unassociated Nickname:"rtl_wifi"
Mode:Auto Access Point: Not-Associated Sensitivity: 0/0
Retry:of RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
lo no wireless exentions
enp3s0 no wireless extensions
I'm assuming that this means that the latter two interfaces are the unused virtual interfaces. Does this tell you anything important?
Last edited by TheAtomicGoose (2014-04-07 21:05:28)

How to know which version Netweaver is been installed in the system

How to know which version Netweaver is been installed in the system.
I wanted to know whether i have installed NW04 SP Stack 13 or higher.
Suggestions / Hints are wellcome
-Naren

hi,
Pretty simple yar
In portal goto>sysconfig>support-->u can find the Version in the content area at the bottom.
There u find the SAP WAS version and EP version.
in NWDS
goto help---->About sap NWDS -->then popup will disply you find the version.
Vesion: 2.0.14 like
Thanks,
Lohi.
Message was edited by:
Lohitha M

How to check which version of Jdk installed on the machine?

How to check which version of Jdk installed on the machine?
& Which version of Oracle Insatlled on my machine?

String version = System.getProperty("java.version"); %

How to Get Which Version of ODAC is installed on System

Hi!
How to find which version of ODAC is installed on system, as it is having many version like 11.2.0.3.0, 11.2.0.2.1, 11.2.0.1.2
and so many. Again in than some are for for 32 bit & 64 bit.
Is there any way to find which version is installed on System Using C# . I tried with registry key
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService\Setup\All Versions\1\
but it is giving @<DB_VERSION>@
Thank you.
- Dattatrya Moin

How to find which version of JDK is loadjava using

Hi All,
How to find which version of JDK is loadjava using?
I am using Oracle : 9.0.1.5.1 and I need to use class javax.crypto.Cipher which is shipped with JDK 1.4.2, but loadjava is unable to import javax.crypto.*;
Any inputs would be greatly appreciated.
Thanks and regards,
Abba

Abba,
From memory only (since I haven't verified it), "loadjava" is a script, so you can have a look at its contents. I believe it actually uses JDK 1.1.8 (which is part of the Oracle installation). In any case, Oracle 9i is compatible with JDK 1.3 only.
Oracle 10g is compatible with JDK 1.4.
Good Luck,
Avi.

How to specify PDF Version while generating reports

Hi,
We are using Oracle Reports 10.1.2
We need PDF Version 1.4. But currently we are getting PDF version 1.3.
How to specify PDF Version as 1.4 while generating the reports?
Any help will be appreciated
Thanks,
Krrish

Hello,
You can open the PDF generated by Reports with a text editor : you'll find something like :
%PDF-1.4
1 0 obj
<<
/Creator (Oracle10gR2 AS Reports Services)
/CreationDate (D:20070721145421)
/ModDate (D:20070721145421)
/Producer (Oracle PDF driver)
/Title (pdfversion.pdf)
/Author (Oracle Reports)
The parameter ACCESSIBLE is described in the online help :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/cmdline/common/cla_accessible.htm
For more details, refer to
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_pdf.htm
Oracle® Application Server Reports Services Publishing Reports to the Web
10g Release 2 (10.1.2)
B14048-02
6 Using PDF in Oracle Reports
6.1.4 Accessibility
Regards

How to find Which one is my Message Server in AIX with DB2

Hi SAP Guru's
PS1 is my Production system(R/3)
in this we have 5 Applications Servers
how to find which one is my Message Server/ Central Instance.
Note : Enqueus Reside in MainFrame Server
OS: AIX
DB: DB2
R/3: 4.7 620 Kernal Version.
you need more information Plz. let me know
I appriciate who gives more explanation
Thanks & Regards,
Kishore Reddy

Hi Ruchit,
cpaiss51     cpaiss51_PS1_06      PS1_D06_CPAISS51
                             DrainBatch           15   -   -   3   5   1   - 24
                             Normal Operations    10   5   -   3   5   1   - 24
                             Specialbatch         10   5   -   3   5   1   - 24
                             THDNIGHTLYBATCH      10   5   -   3   5   1   - 24
cpaiss54     cpaiss54_PS1_06      PS1_D06_CPAISS54
                             DrainBatch           46   -   -   3   5   1   - 55
                             Normal Operations    34 12   1   3   5   1   - 55
                             Specialbatch         34 12   1   3   5   1   - 55
                             THDNIGHTLYBATCH      34 12   1   3   5   1   - 55
cpaiss56     cpaiss56_PS1_06      PS1_D06_CPAISS56
                             DrainBatch           46   -   -   3   5   1   - 55
                             Normal Operations    34 12   1   3   5   1   - 55
                             Specialbatch         34 12   1   3   5   1   - 55
                             THDNIGHTLYBATCH      34 12   1   3   5   1   - 55
cpaiss89     cpaiss89_PS1_06      PS1_D06_CPAISS89
                             DrainBatch           46   -   -   3   5   1   - 55
                             Normal Operations    34 12   -   3   5   1   - 55
                             Specialbatch         34 12   -   3   5   1   - 55
                             THDNIGHTLYBATCH      34 12   1   3   5   1   - 55
cpaiss90     cpaiss90_PS1_06      PS1_D06_CPAISS90
                             DrainBatch           46   -   -   3   5   1   - 55
                             Normal Operations    34 12   1   3   5   1   - 55
                             Specialbatch         34 12   1   3   5   1   - 55
                             THDNIGHTLYBATCH      34 12   1   3   5   1   - 55
Thanks & Regards,
Kishore REddy

Which versions of Microsoft exchange server supports Exchange OLE DB Provider (ExOLEDB)

Hi everyone,
Can anyone tell me which versions of Microsoft exchange server supports Exchange OLE DB Provider (ExOLEDB)? Is Exchange server 2007, 2010 and 2013 support it?
Thanks

Exchange OLE DB was removed from Exchange Server 2010 in Jan 2010. So, it is only available with Exchange
2007, 2003 and 2000. You can visit http://blogs.msdn.com/b/deva/archive/2010/01/13/update-technologies-not-available-with-exchange-2010-their-migration-reference-s.aspx
for more info.

How to set focus in text box at server side

Hi,
I have small problem , i have a text box in form , which is get validated at server side in servlet , if it found some thing wrong then it throws exception , i want that when an exception is thrown it should set focus for that perticular text box. so what should i write to perform such a activity.

Get hold of the element ID in the servlet (and keep the code conventions) and print it out to some Javascript function which does a focus during the onload.
There's an example of focus/highlight using JSP/Servlet/Javascript in this article: [http://balusc.blogspot.com/2008/07/dao-tutorial-use-in-jspservlet.html]. Also see the screenshots at the very bottom.

How to Specify Which Version of Rsync on Server Side

Similar Messages

Maybe you are looking for