How to speed up Dynamic Link? What Hardware will improve this?

I'm currently using AE and PP CS6 with Dynamic Link and rendering out in Media Encoder is very slow. I am not using my computers full power, only about 25% CPU and half of ram. What other components could speed this up? SSD? Rendering on GPU?

In Dynamic Link scenario PrPro communicates with dynamically linked compositions via a single instance of headless AE, which, in turn, creates a bottleneck. You can't improve that with your hardware, you need to change your workflow: when you finish your work in AE, render a digital intermediate and replace your dynamically linked comp in PrPro timeline with that DI. See this good old thread in PrPro Forum, pay attention to Todd's comments.

Similar Messages

How to create a dynamic link in a Form to link to a specific FOLDER

Hello,
I have created a reports of all employees of my department.
This reports shows me the empno and ename
When I clicked on a empno ( for example empno = 1 ) then then I got a MASTER DETAIL FORM about that employee(empno = 1) .
Who he or she is and which course he or she had followed.
I want create a dynamic link in the MASTER DETAIL FORM which shows me directly the folder of that employee ( in this example folder 1 ).
If I clickt on the report with all employees of my department on an other number ( for example empno = 3333333) then if I click on the dynamic link in the MASTER DETAIL FORM I want to see the folder of employee 3333333 !!! You know what I mean ?
What I want to know is, how to create a dynamic link that shows me directly a folder which is dependent on which empno I had clicked on in the report ( report with employee numbers and ename )
Is there any way to pass some parameters into a link to a Folder ? Is this possible in Portal ? Does anyone know how to do this, or do you have a suggestion how to solve this problem ?
Thanks a lot !!!
Chu Lam

Hi Chetan,
I am glad that someone had replied on my question.
I will explain it to you again.
I have created a report that shows me all employees. If I click on a employee number then I get an MASTER DETAIL FORM on my screen with all the information(where he works now and which number I have to dial ifhow can I reach him by telephone) of that employee on which number I clicked on.
I really like this mechanism. (You click on a number and the information that you see in the next screen is dependent of the number you clicked on ! )I have created all this. It works fine.
What I want is to expand this example.
Every employee has a FOLDER (yes, those ones in Content Area ) which they can insert text or image into that folder. The folder name is just the employee number. ( employee with employee number 3303, he owns a folder which is named 3303 and an employee with empno 9999, he or she owns a folder with the name 9999. )
Every employee can tell more about himself in that FOLDER by iserting text and images. For example : What he likes, pictures of his vacation, something like this.
What I want is this :
If I click on the first report,which provides me all employees on screen, on a employee number 3303 then I get a Master Detail Form on my screen with all information about that employee with employee number 3303. And I want in this MASTER DETAIL FORM to create a link that shows me directly the FOLDER of that employee ( 3303), so I can learn more about employee with employee number 3303. But I don't know how to create this link.
That link had to be dependent on the employee number. The difficult thing about this link is that this link had to be dynamic.
I hope this will make it clear to you :
(report all employees:)
empno ename
3301 john smith
3302 peter clark
3303 wilson jones
If I click on a empno ( for example 3303) then I get a MASTER DETAIL FORM which provides me information.
(MASTER DETAIL FORM )
EMPNO 3303
ENAME wilson jones
department New York
mobile number 98908763
Company tel. no day
AOL 097485838 monday till wednesday
Oracle 04848584333 thursday and friday
LINK
(what I want is to create a link here )
If I click on LINK in this MASTER DETAIL FORM then I want to link to the FOLDER of this employee ! ( In this example it is FOLDER 3303.
BUT IF I CLICKED ON THE FIRST REPORT ON A DIFFERENT NUMBER ( FOR EXAMPLE 3301) THEN IF I CLICK ON LINK IN THE MASTER DETAIL FORM THEN I HAVE TO LINKED TO FOLDER 3301.
I just want to know how to make a link like this ( create a dynamic link to a specific folder ).
Thanks in Advance.
Chu

How useful is Adobe Dynamic Link???

So I want to start using this dynamic link. I already own Premiere CS4 and use After Effects 7.0. In order to use the link i have to purchase the whole suite (upgrade) for $1,100 - I called adobe. The only program I want to purchase is After Effect CS4 and that will cost $299.Why don't they offer the dynamic link without having to buy the whole suite? I own CS2 for PS, InDesign and Illustrator so I don't see the need to purchase the whole suite. Is it worth it to spend $1,100? Anyone else use the new suite???

function(){return A.apply(null,[this].concat($A(arguments)))}
pengh wrote:
Thanks... yeah i don't really mind working the "old way" especially with this new machine that is shipping in the mail. It's suppose to render drastically faster then my current workstation, so I guess we'll see. I think i'll get the new AE and wait till later
This is your best bet for now.
In theory, Dynamic Link would be great. But a Dynamic Linked After Effects comp in a Premiere timeline won't play back in anything close to real-time, which makes it very difficult to work with. So I still render out from AE at the highest quality I can, then import the rendered file into Premiere.
Hopefully Dynamic Link in CS5 will be usable, utilizing GPU-acceleration.

My wife and i have an iPhone 5 6.1.2 firmware.. We both are having horrible wifi signals. We have done everything we can.. What update will fix this? I get full bars on my iPad 2 through my whole house.. Be standing right beside the router with iPhone NO

My wife and i have an iPhone 5 6.1.2 firmware.. We both are having horrible wifi signals. We have done everything we can.. What update will fix this? I get full bars on my iPad 2 through my whole house.. Be standing right beside the router with iPhones and it cuts in and out.. Drops from 3 wifi bars to 1

I am having the same problem with brand new Ipad Mini at my house.
It connects to the WiFi fine - but will not pull an IP address in DHCP mode, or if I set all the IP info statically - it still will not get any network access.
This doesn't look like a WiFi issue, as it does connect and is seen by the WiFi Access Point. All the normal WiFi fix stuff doesn't help.
- Using a Dlink DAP-2553 which is less than 2 months old.
Other devices connect fine, including Ipad 2.
This same Mini worked fine at another house and also connected to a mobile hotspot fine....so seems to be some weird IP issue with maybe this Access Point or maybe the older Router that I have (older Netgear)?
I am actually a network engineer and still have not been able to find a solution. Both the Ipad Mini and the Dlink WAP have the latest firmware loaded.
Wondering if anyone has found a solution to this problem.

My husband and I share the same itunes account, but we are getting each other's photos on our phones. What setting will disable this?

My husband and I share the same itunes account, but we are getting each other's photos on our phones. What setting will disable this?

turn off photo stream My Photo Stream FAQ - Apple Support

I've designed a magazine prototype for a client and I need it to flip pages like a book on an i-pad. What software will do this?

I've designed a magazine prototype for a client and I need it to flip pages like a book for her sales team to show on ipads. What software will do this?

The max OS for all Macs with a PowerPC processor is Leopard OS 10.5.x.
If you are going to consider getting a newer, but used, Mac, here's the requirements for Lion.
Lion 10.7 System Requirements
    •    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor (most models released since late 2006 - early Intel-based Macs with Core Solo or Core Duo processors aren't compatible)
    •    2GB of memory (recommend at least 4GB -- and ideally even more, as you'll see benefits in many computing tasks)
    •    OS X v10.6.6 or later (v10.6.8 recommended) for Lion download from Apple App Store; or Leopard 10.5.x if using Lion on USB drive
    •    7GB of available space (10GB recommended)
 Cheers, Tom

I bought my macbook pro in march 2007. I am currently running osx 10.6.8, but want to upgrade to lion or mtn lion. Apple website says i need a mid 2007 or later macbook pro, how do I tell if my Macbook pro will support this upgrade?

I bought my macbook pro in march 2007. I am currently running osx 10.6.8, but want to upgrade to lion or mtn lion. Apple website says i need a mid 2007 or later macbook pro, how do I tell if my Macbook pro will support this upgrade?

The Mid-2007 model didn't come out until June 2007, so you must have bought an earlier model. It won't run Mountain Lion (OS X 10.8.x), but it might run Lion (10.7.x) if you can get hold of a copy, depending on which earlier model it is.
Lion requires at least a Intel Core 2 Duo processor. The first MacBook Pros came out in January 2006, but they had "Core Duo" processors (no "2"). The Core 2 Duo MacBook Pros came out in October 2006. You could have bought either in March 2007.

How to make a Dynamic Link starting in After Effects to Premier (not other way around)

I have seen a ton of tutorials how to Dynamic Link from Premier to After Effects. (but not the other way around. )
I need instructions/video how to link starting in After Effect to Premier.
For example if I make a title in After Effects and then want to dynamic Link it into Premier how is this done?
Thanks!!

I've looked at this too. When I first started using DL, I thought that it was basically a two way street between applications. But that analogy doesn't work very well. DL is PPro-centric. Like PPro is the hub, DL the spokes, and the other Abobe applications are on the rim. And this makes a fair amount of sense. The central feature of an editing suite is the editor, and that would be PPro.
Another way to look at it is that you can push from PPro to AE, and PPro can pull from AE, but AE can not push to PPro. So the direct answer to "I need instructions/video how to link starting in After Effect to Premier" is, you can't. What you can do is make your title composition in AE, import that AE project into PPro, and use the composition as you would any other asset in PPro. Then when you change your title in AE, you'll see the change in PPro almost immediately without you having to do anything.
When I'm making motion lower thirds, for example, I now make them in AE. I let the AE project reside in the directory with the PPro project that I made the lower thirds for. Then when I want the lower thirds in PPro, I just import the AE lower thirds into the PPro project. There's a few ways to do this. One is to use the Media Browser. The MB will open up the AE project for you and let you select which composition you want to import. Another way is to File...Adobe Dynamic Link...Import AE composition which does more or less the same thing. There may be other ways as well, IDK.

How to get Adobe Dynamic Link update?

I have finished few project with Adobe Dynamic Link but my last project has given me some run around, I have notice the Adobe Dynamic link has not been updated when updated my Premiere sequence. (I use the Sequnce for the timeline from Premiere) Is there a way to refresh the Adobe Dynamic Link so my Encore Project has the latest sequence. Thanks for your input.
Wayne

Try this:
http://forums.adobe.com/message/4052001#4052001

How do I break Dynamic Link

I am editing a multicam music video. the multicam greenscreen footage starts in premire. I then send it dynamic link to AE. then I decide clip b is more appropriate than clip A. So I return to premire ctr z to remove dynamic link, swich to camera b and the multicam window updates. the moment I right click to send edit to AE, it switches back to to clip b in premire and appears in the original AE comp again. I then close AE, create a new project on transfer, the same thing happens. is the choice stuck in the pipeline or premiere and hw do correct the error.
Thans

I think you're asking for trouble trying to cut a multicam DL. The better work flow on this may be to start in After Effects and do all your green screen work first, then export out Intermediate files for actual editing in PP.

New Install - What hardware will I get?

We're moving to Pittsburgh and have an install date of 8/6. I want to do my homework and see what TV "should" be connected to what device. If there are any gotchas on setting up my home network, etc... So any ideas on what hardware I'll get?
If it matters I ordered the FiOS Triple Play with Ultimate HD, Digital Voice and 35/35 Internet. We picked the Multi-Room DVR package with one DVR and two Set Top Boxes.
Sorry if I posted this in the wrong place...
Matt

MattNeimeyer,
There should be no issues withe setting up your network. The technician that will install your service will setup your main computer and help you setup your wireless. Please let us know if have any additional questions.
Thanks,
Tonya D.

How to Create a Dynamic Link Oracle 10g

Hi all,
I have a requirement like i am using the below sql query in my application
select * from emp@testlink;Now i have 3 users i have created the seperate link for this three users.
ex: test and work and office
Now if test login to pc the above code will be
select * from emp@testlink;if work entered dynamically it will be as
select * from emp@worklink;same as office .
@||variable||link;
variable i have to pass it in dynamic.
How to achieve this??
Can anyone suggest me thanks in advance.
Cheers,
San..

Did you try dynamic SQL?
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/dynamic.htm
Something like this.... (UnTested)
DECLARE
v_user VARCHAR2(50);
BEGIN
EXECUTE IMMEDIATE 'select * from emp@' || v_user || 'llink';
END;In your case, the link name is based on the user, you can simplify it like this
DECLARE
v_user VARCHAR2(50);
BEGIN
EXECUTE IMMEDIATE 'select * from emp@' || LOWER(user) || 'llink';
END;You might need to use INTO clause for the select statements.
Regards,
Rakesh
Edited by: Rakesh on Apr 6, 2011 6:05 PM

How do I make dynamic links to Excel cells, not sheets?

Help! I thought I'd found the perfect way to link an in-progress Excel spreadsheet to an in-progress InDesign file. That allowed the Product Management group to do content, and the graphic group to do layout simultaneously. After several days of layout, someone changed the number of rows in the spreadsheet, and all the cell links to InDesign are broken. I have pages and pages already done, and the cells are filling with the entire spreadsheet, and not tracking to the moved cells. HELP!

Bob:
Well, you had my heart beating fast for a minute, hoping it was that simple. I tested in .xls, and it does permit the link back to a unique cell, instead of the whole sheet, but it doesn't track cell content that's moved to a new row/column position in the sheet. I think I'm out of luck -- and headed for a few beers.
Thanks.

How to update a dynamic linked composition in Encore CS5 (from a Premiere CS5 sequence)

I created a project in Premiere CS5, I then sent it to Encore CS5 for Authoring. I created menus and then transcoded it and burnt my disk... HOWEVER, my client now needs to change one of the credits, so I did so using Premiere, but I can't figure out how to get it to update in Encore...
Can someone help?
Thanks!

Try the "Revert to Original" command.
-Jeff

Using javascript or HTML, When I click a link to a named page that already loaded in a tabbed page the tabbed page does not show, but you can see that the page relaoded. Using HTML or javascript what script will make this happen? The javascript focus() fu

If a page is already loaded into a tab then using any of the following scripts will not cause the tabbed page to show when the link to it is clicked (created via PHP):
"Continue Shopping".
OR
"Continue Shopping".
OR
"Continue Shopping".
The first HTML works perfectly in the Safari browser.
== This happened ==
Every time Firefox opened
== Always

The scripts for this should have shown as:

How to speed up Dynamic Link? What Hardware will improve this?

Similar Messages

Maybe you are looking for