How to speed up performance

I have a 3 year old Powerbook G4, and up until recently it's run quite well. However, over the past few weeks, I have noticed that it has slowed down considerably, and the pinwheel pops up quite frequently. As I empty the cache on a regular basis, I never expect to see much in it--however, lately, I've been noticing as many as 2,000 items when I empty the trash can after clearing the cache. I've also performed numerous virus scans to see if that could be causing some of the slowness, but nothing turns up.
Can anyone please tell me what might be causing this? In general, are there any steps I can take toward speeding up the performance of my computer? Is there anything I can do to make sure my computer doesn't give out anytime soon?

third party compatibility issues can do it. clean install will revive it but save your data first.

Similar Messages

How do I improve performance while doing pull, push and delete from Azure Storage Queue

Hi,
I am working on a distributed application with Azure Storage Queue for message queuing. queue will be used by multiple clients across the clock and thus it is expected that it would be heavily loaded most on the time in usage. business case is typical as in
it pulls message from queue, process the message then deletes the message from queue. this module also sends back a notification to user indicating process is complete. functions/modules work fine as in they meet the logical requirement. pretty typical queue
scenario.
Now, coming to the problem statement. since it is envisaged that the queue would be heavily loaded most of the time, I am pushing towards to speed up processing of the overall message lifetime. the faster I can clear messages, the better overall experience
it would be for everyone, system and users.
To improve on performance I did multiple cycles for performance profiling and then improving on the identified "HOT" path/function.
It all came down to a point where only the Azure Queue pull and delete are the only two most time consuming calls outside. I can further improve on pull, which i did by batch pulling 32 message at a time (which is the max message count i can pull from Azure
queue at once at the time of writing this question.), this returned me a favor as in by reducing processing time to a big margin. all good till this as well.
i am processing these messages in parallel so as to improve on overall performance.
pseudo code:
//AzureQueue Class is encapsulating calls to Azure Storage Queue.
//assume nothing fancy inside, vanila calls to queue for pull/push/delete
var batchMessages = AzureQueue.Pull(32); Parallel.ForEach(batchMessages, bMessage =>
//DoSomething does some background processing;
try{DoSomething(bMessage);}
catch()
//Log exception
AzureQueue.Delete(bMessage);
With this change now, profiling results show that up-to 90% of time is only taken by the Azure Message delete calls. As it is good to delete message as soon as processing is done, i remove it just after "DoSomething" is finished.
what i need now is suggestions on how to further improve performance of this function when 90% of the time is being eaten up by the Azure Queue Delete call itself? is there a better faster way to perform delete/bulk delete etc?
with the implementation mentioned here, i get speed of close to 25 messages/sec. Right now Azure queue delete calls are choking application performance. so is there any hope to push it further.
Does it also makes difference in performance which queue delete call am making? as of now queue has overloaded method for deleting message, one which except message object and another which accepts message identifier and pop receipt. i am using the later
one here with message identifier nad pop receipt to delete message from queue.
Let me know if you need any additional information or any clarification in question.
Inputs/suggestions are welcome.
Many thanks.

The first thing that came to mind was to use a parallel delete at the same time you run the work in DoSomething. If DoSomething fails, add the message back into the queue. This won't work for every application, and work that was in the queue
near the head could be pushed back to the tail, so you'd have to think about how that may effect your workload.
Or, make a threadpool queued delete after the work was successful. Fire and forget. However, if you're loading the processing at 25/sec, and 90% of time sits on the delete, you'd quickly accumulate delete calls for the threadpool until you'd
never catch up. At 70-80% duty cycle this may work, but the closer you get to always being busy could make this dangerous.
I wonder if calling the delete REST API yourself may offer any improvements. If you find the delete sets up a TCP connection each time, this may be all you need. Try to keep the connection open, or see if the REST API can delete more at a time
than the SDK API can.
Or, if you have the funds, just have more VM instances doing the work in parallel, so the first machine handles 25/sec, the second at 25/sec also - and you just live with the slow delete. If that's still not good enough, add more instances.
Darin R.

My Mac has gone really slow since upgrading to Mavericks. Any suggestions as to how to speed things up again?

My Mac has gone really slow since upgrading to Mavericks. Any suggestions as to how to speed things up again?

First, back up all data immediately unless you already have a current backup. If you can't back up, stop here. Do not take any of the steps below.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How to speed MAC BOOK PRO

starting Mac book pro become very slow about 4 minutes. How can I speed it?

For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utility is: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption. Drive Genius provides additional tools not found in Disk Warrior for defragmentation of older drives, disk repair, disk scans, formatting, partitioning, disk copy, and benchmarking.
Four outstanding sources of information on Mac maintenance are:
1. OS X Maintenance - MacAttorney.
2. Mac maintenance Quick Assist
3. Maintaining Mac OS X
4. Mac Maintenance Guide
Periodic Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) SeeMac OS X- About background maintenance tasks. If you are running Leopard or later these tasks are run automatically, so there is no need to use any third-party software to force running these tasks.
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced after Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
Defragmentation
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive except when trying to install Boot Camp on a fragmented drive. But you don't need to buy third-party software. All you need is a spare external hard drive and Carbon Copy Cloner.
Cheap and Easy Defragmentation
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive. You will use Carbon Copy Cloner to create the backup and to restore it.
1. Get an empty external hard drive and clone your internal drive to the
       external one.
2. Boot from the external hard drive.
3. Erase the internal hard drive.
4. Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not depressed or is ghosted.
5. Click on the Clone button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the upward pointing arrow button.
After startup do the following:
Erase internal hard drive
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your internal hard drive (this is the entry with the
       mfgr.'s ID and size) from the left side list. Note the SMART status of the
       drive in DU's status area. If it does not say "Verified" then the drive is
       failing or has failed and will need replacing. SMART info will not be
       reported on external drives. Otherwise, click on the Partition tab in the
       DU main window.
3. Under the Volume Scheme heading set the number of partitions from the
       drop down menu to one. Set the format type to Mac OS Extended
       (Journaled.) Click on the Options button, set the partition scheme to
       GUID then click on the OK button. Click on the Partition button and wait
       until the process has completed.
Restore the clone to the internal hard drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not selected or is ghosted.
5. Click on the Clone button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.
Malware Protection
As for malware protection there are few if any such animals affecting OS X. Starting with Lion Apple has included built-in malware protection that is automatically updated as necessary.
Helpful Links Regarding Malware Protection:
1. Mac Malware Guide.
2. Detecting and avoiding malware and spyware
3. Macintosh Virus Guide
For general anti-virus protection I recommend only using ClamXav, but it is not necessary if you are keeping your computer's operating system software up to date. You should avoid any other third-party software advertised as providing anti-malware/virus protection. They are not required and could cause the performance of your computer to drop.
Cache Clearing
I recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Corrupted cache files can cause slowness, kernel panics, and other issues. Although this is not a frequent nor a recurring problem, when it does happen there are tools such as those above to fix the problem.
For emergency cleaning install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (AppleJack works with Snow Leopard or earlier.)
Installing System Updates or Upgrades
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Backup and Restore
Having a backup and restore strategy is one of the most important things you can do to maintain your computer. Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner.
2. Deja Vu
3. SuperDuper!
4. Synk Pro
5. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space. Avoid installing utilities that rely on Haxies, SIMBL, or that alter the OS appearance, add features you will rarely if ever need, etc. The more extras you install the greater the probability of having problems. If you install software be sure you know how to uninstall it. Avoid installing multiple new software at the same time. Install one at a time and use it for a while to be sure it's compatible.
Additional suggestions will be found in:
1. Mac OS X speed FAQ
2. Speeding up Macs
3. Macintosh OS X Routine Maintenance
4. Essential Mac Maintenance: Get set up
5. Essential Mac Maintenance: Rev up your routines
6. Five Mac maintenance myths
7. How to Speed up Macs
8. Myths of required versus not required maintenance for Mac OS X

HI All, How to improve the performance in given query?

HI All,
How to improve the performance in given query?
Query is..
PARAMETERS : p_vbeln type lips-vbeln.
DATA : par_charg TYPE LIPS-CHARG,
par_werks TYPE LIPS-WERKS,
PAR_MBLNR TYPE MSEG-MBLNR .
SELECT SINGLE charg
werks
INTO (par_charg, par_werks)
FROM lips
WHERE vbeln = p_vbeln.
IF par_charg IS NOT INITIAL.
SELECT single max( mblnr )
INTO par_mblnr
FROM mseg
WHERE bwart EQ '101'
AND werks EQ par_werks (index on werks only)
AND charg EQ par_charg.
ENDIF.
Regards
Steve

Hi steve,
Can't you use the material in your query (and not only the batch)?
I am assuming your system has an index MSEG~M by MANDT + MATNR + WERKS (+ other fields). Depending on your system (how many different materials you have), this will probably speed up the query considerably.
Anyway, in our system we ended up by creating an index by CHARG, but leave as a last option, only if selecting by matnr and werks is not good enough for your scenario.
Hope this helps,
Rui Dantas

How to speed up the BEA weblogic workshop perforkmance?

Hi,
Does anybody knows how to speed up the BEA weblogic workshop,as it consumes heavy memory.
I've configured the settings in workshop.cfg file and set the maximum memory size as 1024m midium size 516m and minimum size as 256m
and deleted all the files from .workshop directory before open up the workshop file.
But it hanging up the system when i opened the worshop file after some time. what could be the problem . i am using 2GB ram size

Hi Vishnu,
I agree this can also be one of the reason for the performance. There is Trend Micro Office Scan client installed on my system, but i couldn't not do any settings ,as it is disabled by sys admin .
however, i removed all the scanning processes from task manager and set the high priority for the java process! still, no improvement. There are only few jpd files not even 500kb size, but when i open them, weblogic cried and utilized lots lots of memory! :-(
I am afraid to open the weblogic which had jpd files,as it hanged my whole system, unable to perform any other tasks!

How to optimize the performance of this code ?

I've two Movie clips on a flash project. One of them is fixed and the other can be moved by arrow buttons on the keyboard. The two Movie clips have irregular shapes, so HitTestObject and HitTestPoint doesn't work very well. I've a function that detects collision of two movie clips using bitmap. I wanted to update the position of the movable Movie clip so I put the collision detection function under the code of ENTER_FRAME event listener. It works very well, but when I add many fixed movie clips ( about 10 fixed movie clips in one frame ), the game (.swf file) becomes slower and the performance of the PC becomes slower. I thought that my collision detection function has a negative effect on PC performance so I used the class on this page : https://forums.adobe.com/thread/873737
but the same thing happens.
Would you tell me how to speed up the execution of my codes ?
Here is part of my code :
stage.addEventListener(Event.ENTER_FRAME, myOnEnterFrame);
function myOnEnterFrame(event:Event):void
if (doThisFn) // doThisFn is a variable to allow or prevent the movable movie clip form being moved with keyboard arrows
if ( left && !right ) {
player.x -= speed;
player.rotation = player.rotation - speed ;
if( right && !left ) {
player.x += speed;
player.rotation = player.rotation + speed ;
if( up && !down ) {
player.y -= speed;
if( down && !up ) {
player.y += speed;
// The fixed movie clips are wall1 ,wall2 , wall3 , wall4 , ... and so on
// the following code checks how many walls exists on each frame and pushes them into the wallA array
for(var i:int=0;i<1000;i++) // We can put up to 1000 wall object into the wallA array
if(this['wall'+i]) // If the object wall exists, push it into the wallA array
wallA.push(this['wall'+i]);
for(i=0;i<wallA.length;i++)
if( h.hitF (player , wallA[i] ) || gameOverTest ) // This code checks if the player ( the movable movie clip ) hits the walls or not
trace ( "second try" ) ;
gameOver.visible = true ;
doThisFn = false ;
//I think the following codes are easy to excite and run. I think the performance issue is due to previous codes.
if (player.hitTestObject(door))
win.visible = true ;
doThisFn = false ;
if (key) // if there is a key on frame
if (player.hitTestObject(key))
key.visible = false ;
switch( currentFrame )
case 4:
wallA[0].visible = false ;
wallA[0].x = 50000;
break;
case 5:
wall14.play();
wall8.x = 430 ;
break;

it's a simple question that usually has no simple answer.
here's an excerpt from a book (Flash Game Development: In a Social, Mobile and 3D World) i wrote.
Optimization Techniques
Unfortunately, I know of no completely satisfactory way to organize this information. In what follows, I discuss memory management first with sub-topics listed in alphabetical order. Then I discuss CPU/GPU management with sub-topics listed in alphabetical order.
That may seem logical but there are, at least, two problems with that organization.
1. I do not believe it is the most helpful way to organize this information.
2. Memory management affects CPU/GPU usage, so everything in the Memory Management section could also be listed in the CPU/GPU section.
Anyway, I am going to also list the information two other ways, from easiest to hardest to implement and from greatest to least benefit.
Both of those later listings are subjective and are dependent on developer experience and capabilities, as well as, the test situation and test environment. I very much doubt there would be a consensus on ordering of these lists. Nevertheless, I think they still are worthwhile.
Easiest to Hardest to Implement
1. Do not use Filters.
2. Always use reverse for-loops and avoid do-loops and avoid while-loops.
3. Explicitly stop Timers to ready them for gc (garbage collection).
4. Use weak event listeners and remove listeners.
5. Strictly type variables whenever possible.
6. Explicitly disable mouse interactivity when mouse interactivity not needed.
7. Replace dispatchEvents with callback functions whenever possible.
8. Stop Sounds to enable Sounds and SoundChannels to be gc'd.
9. Use the most basic DisplayObject needed.
10. Always use cacheAsBitmap and cacheAsBitmapMatrix with air apps (i.e., mobile devices).
11. Reuse Objects whenever possible.
12. Event.ENTER_FRAME loops: Use different listeners and different listener functions applied to as few DisplayObjects as possible.
13. Pool Objects instead of creating and gc'ing Objects.
14. Use partial blitting.
15. Use stage blitting.
16. Use Stage3D
Greatest to Least Benefit
Use stage blitting (if there is enough system memory).
Use Stage3D.
Use partial blitting.
Use cacheAsBitmap and cacheAsBitmapMatrix with mobile devices.
Explicitly disable mouse interactivity when mouse interactivity not needed.
Do not use Filters.
Use the most basic DisplayObject needed.
Reuse Objects whenever possible.
Event.ENTER_FRAME loops: Use different listeners and different listener functions applied to as few DisplayObjects as possible.
Use reverse for-loops and avoid do-loops and while-loops.
Pool Objects instead of creating and gc'ing Objects.
Strictly type variables whenever possible.
Use weak event listeners and remove listeners.
Replace dispatchEvents with callback functions whenever possible.
Explicitly stop Timers to ready for gc.
16. Stop Sounds to enable Sounds and SoundChannels to be gc'd.

My MAC pc seems to be working slowly - how to speed it back up?

How to speed up my MAC pc?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Mac is slow. how to speed up

My Mac (1 yr old) has slowed down. How to speed it up?

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the system log for messages that may indicate a hardware fault. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|nspace-h|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How to speed up rman backup?

Hi,
we are taking backup using rman. my database size is increasing.so rman backup time is increasing. so i want to spped up rman bakup performance. how to speed up rman bakup?
Thnaks,

My general request whenever you post the question in forum please start your question something like this:
Oracle Version : <4 digit version> select * from v$version;
OS Information with complete version and/or patch whatsoever.
1. http://www.oracle-base.com/articles/10g/RMANEnhancements10g.php
2. Re: RMAN Backup Script
and read the reply of Adith
You can also use set
CONFIGURE BACKUP OPTIMIZATION ON
Additionally review
Restarting and Optimizing RMAN Backups
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmbackp007.htm#i1006318
Best Regards
Girish Sharma

How to speed up Nokia E72

Hello,
Can someone please guide me how to speed up Nokia E-72 ?
I mean how to make it quick by disabling the effects etc. and keep it simple, fast and stable ?
Thanks.

Mine slows down over time, and eventually starts missing emails and hanging for seconds at a time even for simple operations.
Solution is to hard reset every few weeks, after creating a backup, then restore settings and data afterwards. Seems to speed it up to factory fresh performance every time.
Ian

How to speed up a mac

How to speed up a Mac.

More information is required to begin addressing your question, much more. What specific model Mac Pro are you using?  (Apple) menu > About This Mac...
Whatever you do, do not download or install any product claiming to magically "clean up" or "speed up" or "optimize" your Mac. Without exception, they will do the opposite. If you already did, you found the problem. Fix it.
If it is only Web browsing that seems to be slower than it used to, that is often the result of such sites becoming ever more demanding of hardware and bandwidth. Short of paying for faster Internet service, buying additional memory, or a faster Mac, there is little you can do to cope with such so-called progress.
If you are experiencing general slowdowns or "freezes" unrelated to Internet activity, the problem may be related to your computer or the software you installed and is something you may be able to fix, or at least improve. Aside from hardware failures and software that you install, including OS upgrades, there is no reason that your computer should not work precisely the same as it did when it was new.
Without a more specific description it is difficult to provide specific guidance. Read the following to determine if something may apply to your concern:
General Mac maintenance: Tips to keep your Mac in top form
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary account to isolate user-specific problems: Isolating an issue by using another user account
Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
Identifying resource hogs and other tips: Runaway applications can shorten battery runtime, affect performance, and increase heat and fan activity
To identify potential hardware problems: Apple Hardware Test.
To resolve startup issues and perform disk maintenance, use Disk Utility.
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode

How to speed up Mac OS X

Very slow processing. Any ideas of what to do? Deleted cookies already.

Get a faster model.
If you can add more RAM, that's a start. Also, a faster hard drive if you can replace the hard drive. Then see:
Kappy's Personal Suggestions About Mac Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utility is: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption. Drive Genius provides additional tools not found in Disk Warrior for defragmentation of older drives, disk repair, disk scans, formatting, partitioning, disk copy, and benchmarking.
Four outstanding sources of information on Mac maintenance are:
1. OS X Maintenance - MacAttorney.
2. Mac maintenance Quick Assist
3. Maintaining Mac OS X
4. Mac Maintenance Guide
Periodic Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) See Mac OS X- About background maintenance tasks. If you are running Leopard or later these tasks are run automatically, so there is no need to use any third-party software to force running these tasks.
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced after Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
Defragmentation
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive except when trying to install Boot Camp on a fragmented drive. But you don't need to buy third-party software. All you need is a spare external hard drive and Carbon Copy Cloner.
Cheap and Easy Defragmentation
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive. You will use Carbon Copy Cloner to create the backup and to restore it.
1. Get an empty external hard drive and clone your internal drive to the
       external one.
2. Boot from the external hard drive.
3. Erase the internal hard drive.
4. Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not depressed or is ghosted.
5. Click on the Clone button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the upward pointing arrow button.
After startup do the following:
Erase internal hard drive
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your internal hard drive (this is the entry with the
       mfgr.'s ID and size) from the left side list. Note the SMART status of the
       drive in DU's status area. If it does not say "Verified" then the drive is
       failing or has failed and will need replacing. SMART info will not be
       reported on external drives. Otherwise, click on the Partition tab in the
       DU main window.
3. Under the Volume Scheme heading set the number of partitions from the
       drop down menu to one. Set the format type to Mac OS Extended
       (Journaled.) Click on the Options button, set the partition scheme to
       GUID then click on the OK button. Click on the Partition button and wait
       until the process has completed.
Restore the clone to the internal hard drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not selected or is ghosted.
5. Click on the Clone button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.
Malware Protection
As for malware protection there are few if any such animals affecting OS X. Starting with Lion, Apple has included built-in malware protection that is automatically updated as necessary. To assure proper protection, update your system software when Apple releases new OS X updates for your computer.
Helpful Links Regarding Malware Protection:
1. Mac Malware Guide.
2. Detecting and avoiding malware and spyware
3. Macintosh Virus Guide
For general anti-virus protection I recommend only using ClamXav, but it is not necessary if you are keeping your computer's operating system software up to date. You should avoid any other third-party software advertised as providing anti-malware/virus protection. They are not required and could cause the performance of your computer to drop.
Cache Clearing
I recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, Mountain Lion Cache Cleaner 7.0.9, Maintenance 1.6.8, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Corrupted cache files can cause slowness, kernel panics, and other issues. Although this is not a frequent nor a recurring problem, when it does happen there are tools such as those above to fix the problem.
If you are using Snow Leopard or earlier, then for emergency cleaning install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (AppleJack works with Snow Leopard or earlier.)
Installing System Updates or Upgrades
Repair the hard drive and permissions beforehand.
Update your backups in case an update goes bad.
Backup and Restore
Having a backup and restore strategy is one of the most important things you can do to maintain your computer. Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. You can never have too many backups. Don't rely on just one. Make several using different backup utilities. My personal recommendations are (order is not significant):
     1. Carbon Copy Cloner
     2. Get Backup
     3. Deja Vu
     4. SuperDuper!
     5. Synk Pro
     6. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Final Suggestions
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space. Avoid installing utilities that rely on Haxies, SIMBL, or that alter the OS appearance, add features you will rarely if ever need, etc. The more extras you install the greater the probability of having problems. If you install software be sure you know how to uninstall it. Avoid installing multiple new software at the same time. Install one at a time and use it for a while to be sure it's compatible.
Additional reading may be found in:
1. Mac OS X speed FAQ
2. Speeding up Macs
3. Macintosh OS X Routine Maintenance
4. Essential Mac Maintenance: Get set up
5. Essential Mac Maintenance: Rev up your routines
6. Five Mac maintenance myths
7. How to Speed up Macs
8. Myths of required versus not required maintenance for Mac OS X
Referenced software can be found at CNet Downloads or MacUpdate.
Most if not all maintenance is for troubleshooting problems. If your computer is running OK, then there isn't really a thing you need to do except repair the hard drive and permissions before installing any new system updates.

My imac is getting slower and slower and has probems connecting to internet. Any idea on how to restore initial performance? thanks

my imac is getting slower and slower and has probems connecting to internet. Any idea on how to restore initial performance? thanks

What year, screen size, CPU speed and amount of RAM installed?
What version of OS X is your iMac running?
How full is your Mac's hard drive?
How many applications do you run simultaneously in the background while working in another application?
Do you run any antivirus software on your Mac? Antivirus software can slow down the normal operation of OS X.
Do you run any "crapware" like Mackeeper or any other type of so called hard drive "cleaning" apps?

UCS - IPMI - vCenter - How to speed up boot?

I have enabled IPMI on the UCS so that vCenter can power down/up the blades based on performance needs.
It works great. The blades get powered off when the utilization is low and then powered on when the utiltization increases.
My only issue is the time it takes for the blades to boot ESXi 4.0 (around 7 minutes). The time seems mostly to be prior to the actual bootingof ESXI.
The only two boot options I have enabled for my blades is CDROM and Harddrive.
Does anyone have any ideas on how to speed up the boot process?
Or is there a way for the blade to go into standby instead of actually powering off?
Kris

Watch out for the IPMI MAC address issue, https://supportforums.cisco.com/docs/DOC-8582, I think Aptos+ release fixes this real soon now...

How to speed up performance

Similar Messages

Maybe you are looking for