How to spell a word, one letter at a time, one letter per clip
I can't figure out how to do this. I just purchased PE and I'm creating a small clip with a song as the audio. I'm an iMovie '11 user trying to utilize PE.
So is there a way to do this?
I have add a clip, add the letter B, I copied and pasted that clip to duplicate the font, size, clip size, etc. The next clip I change the letter to U but when I do that it changes the previous clip as well. I'm not understanding how this works.
Along with Steve's comments, this article might provide some useful tips on using Titler: http://forums.adobe.com/message/4976998#4976998
Good luck, and hope that it helps with using Titler,
Hunt
Similar Messages
-
How do i make word open at 150% every time
how do i make word open at 150% every time
Since Word is a Microsoft product, ask in their forums.
-
How to decrease Microsoft Word 2010 Add-in loading time
Problem Statement.Developed a Microsoft Word 2010 (32 bit) Add-In using VB.Net 3.5 in visual studio 2010. I am not sure if i followed required procedures but somehow i achieved what was required at client end.
Steps followed
1. New VS2010 solution VB >Office> Word 2010 Add In
2. Added ribbon and Inserted buttons on ribbon,
3. Added desired code behind buttons
4. Added a VS Installer setup project and added registry entries,
5. Manifest "path\WordAddIn.vsto|vstolocal"
6. LoadBehavior set to 3
Now problem is after installing Built Add In on Client computers Microsoft Word 2010 32 bit takes almost 25 to 40 seconds to load every time Word is started client computers having Win Server 2008 R2 64 bit.
Please guide how to resolve the issue.Hello Rakesh,
There can be multiple reasons why you see such delay. Take a look at the following links for more information:
Resolving performance issues with loading Office add-ins (VSTO add-ins or Shared add-ins)
slow load time for VSTO AddIn in Word 2013 64-bit
Is the certificate revocation enabled on the problematic machine? See
Under IE Security -> “Check for publisher's certificate revocation”. -
Hello Everyone,
Here is my situation. I have one vi that is reading an AI task of 8 channels AI0 --> AI7 (one sample on demand) and also has control of all of the digital outputs on the board. My problem is that I want to run another vi that will use the last AI channel AI8 and an AO channel AO0. These two vi's do not need to know anything about one another but I do need them both to be running at the same time. Currently when I try running the two vi's together both vi's crash and I get an error message stating that the AI8 pin is reserved. AI8 is not part of the task and is not refrenced anywere in the larger vi. I am assuming that this problem is do to the fact that the larger vi is occupying the DAQ board, cycling through the task when the smaller vi is requesting data from AI8 and the DAQ board cannot do two things at once. The sampling rate on the smaller vi is not really that important. Is there anyway I can get the smaller vi to read from AI8 and not crash??? Software and Hardware listed below. Thanks in advance for any suggestions.
PCI-6221
Labview 7.1Hi steve ,
Sorry to say that you cannot configure and acquire from AI channels on a Device simultaineously from 2 seperate VI's.
regards
Dev -
How to spell currency from number to words
how to spell currency from number to words?
Is there a built in function in oracle?
Can anybody give me the code?
thanks
sharathok, rewritten to work with nulls and numbers from -5373484.99$ to +5373484.99$
SQL> set null "<NULL>"
SQL> select
to_char(comm, '$999999.99'),
decode(comm, null, null,
decode(sign(trunc(comm)),
0, to_char(to_date(to_char(trunc(comm)),'SSSSS'),'ssssssp'),
1, to_char(to_date('1','J')+(trunc(comm)-1),'jsp'),
-1, 'minus '||to_char(to_date('1','J')+(trunc(comm)-1),'jsp')
) || ' dollars and '||
to_char(to_date(to_char(mod(comm,1)*100),'SSSSS'),'ssssssp')||
' cents'
from emp;
TO_CHAR(COM DECODE(COMM,NULL,NULL,DECODE(SIGN(TRUNC(COMM)),0,TO_CHAR(TO_DATE(TO_CHAR(TRUNC(COMM)),'SSSSS'),'SSSSSSP'),1,TO_CHAR(TO_DATE('1','J')+(TRUNC(COMM)-1),'JSP
<NULL> <NULL>
$300.00 three hundred dollars and zero cents
$500.00 five hundred dollars and zero cents
<NULL> <NULL>
$1400.00 one thousand four hundred dollars and zero cents
<NULL> <NULL>
<NULL> <NULL>
<NULL> <NULL>
<NULL> <NULL>
$.00 zero dollars and zero cents
<NULL> <NULL>
<NULL> <NULL>
<NULL> <NULL>
<NULL> <NULL> -
Firefox won't let me open more than one window at a time. how do i fix the problem
Firefox won't let me open more than one window at a time. It use to allow me to open multiple windows before but for no apparent reason it stopped. I uninstalled it and re-installed but I'm having the same problem. How do I fix the problem
== This happened ==
Every time Firefox opened
== several days agoStart Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit") -
I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.
I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.
-
I wish to install adobe Flash player , I do not know my pass word .How do I create a new one or retrieve the original one?
Hi Don,
DON RICE wrote:
I wish to install adobe Flash player , I do not know my pass word .How do I create a new one or retrieve the original one?
Which password are you referring to in your statement? You can download flash player using this Link - https://get2.adobe.com/flashplayer/
Regards,
Rahul -
Missed one letter at the time of creating account for icloud. how do i fix or create another email account?
Hi jtv123,
Could you please tell us exactly what happens when you try to set up your account?
With kind regards,
David -
How can I open a new page (using "Pages") when I already have another page open? It just keeps reverting to the page I have opened already and won't let me open another one?
To make a new document, go to File > New From Template chooser and choose the type of document you wish to create.
To add a new page to an existing document go to Insert > Sections > Blank. -
Have content of iTunes on both Appletvs but can only play on one. Tv menu won't let me choose both locations. How do I correct this? ITunes Home Sharing is on. Multiple Airplay is on from the iTunes menu, too. Thanks, Taking too long to get music!
If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go -
When I close a tab, a new blank one opens that it won't let me close. How do I stop this?
This started only a few days ago, and it's nothing too serious, but it's kind of annoying. If I have two tabs open and I close one, a new blank tab opens. I try to close it, but it won't let me, however, it will let me browse on that tab, just not close it out. I've tried disabling add-ons, and that didn't work. Sometimes I only want one tab open, but it just won't let me have only one tab open.
I've got Firefox version 31.0 and I use Windows 7, if that helps.There is an option in Firefox to not close the last browser window / tab.
Open a new window or tab. In the address bar, type '''about:config'''.
If a warning screen comes up, press the '''Be Careful''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter;
'''browser.tabs.closeWindowWithLastTab''' This should be true. -
How to merge PDF/Word Doc with the Form I created?
Hi All,
Which software should I use to merger PDF/Word Doc with the form I created.
One more question is I want the form page to show up right next to the ending or in the middle of the word doc . How to manange the placement of the sections?
Please do let me know, its urgent.
Thanks and Regards,
Hari.1) The option of creating the whole thing as a LiveCycle form means that you need to convert the Word document using LiveCycle Designer. The import utility won't preserve the fidelity of the Word document the way printing to the PDF print driver does. It will likely require a fair bit of tweaking in Designer to get it looking like you want. You will likely get frustrated, since Designer is not a word processor.
2) You can create PDF forms in Acrobat without launching LiveCycle Designer. While they look the same to a user as forms created with LiveCycle Designer, behind the scenes they are very different. When you create a form in Acrobat you overlay fields on top of an existing PDF document that you had previously created using the PDF print driver. There is an extensive scripting model for these "Acroforms". The technology pre-dates LiveCycle yet Adobe continues to improve the two forms models in parallel. In Acrobat, open a PDF and select tools-->forms-->show forms toolbar.
3) I recommend this option if it's feasible. I don't know what you mean by "doesn't show up in a flow". If you're going to use the form in Acrobat 7, then save it as Acrobat 7 compatible in LiveCycle Designer. This is one of the options in the Save As dialog of LiveCycle Designer.
Jared Langdon
http://www.jlangdon.ca -
Spell checking words that are capitalized
I have created a form in which I have enforced capitalization of all text the user enters (all words in the given field are capitalized automatically when the user exits the field) additionally I fire the Adobe Reader spell checker automatically when the user prints the form.
There in lies my problem. The adobe reader does not seem to spell check word that are in all caps. Am I missing something, or does any one have any ideas how I can get around this?Thanks! I also discovered that I can add dictionaries for the spellchecker in "Library > Spelling" and then go to "System Preferences > Keyboard > Text > Spelling > Set up..." and select them there, so that may be a faster way to add words to the spellchecker.
-
When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?
I've tried rebuilding the thumbnail database, but that hasn't helped.What version of iPhoto and system are you running?
Try moving the Zoom slider at the bottom of the iPhoto window all the way to the left. Does that let more than one photo display in the window?
OT
Maybe you are looking for
-
HP pavilion g6. stopped responding card
Bought powerful expensive laptop. Everyone was happy. But then the video card stopped responding. He went into the device manager. There should be two video cards Intel RD (it all okay, the first weak graphics card) ATI Radeon 7670m (the one that is
-
Settlement rule SDI in prod order
Hi, I used strategy make to order in my client, when i create prod order the settlement rule is always MAT and want the settlement rule to be SDI to my sales order. What should i config to achieve this ? since i tried to change order type dependent p
-
CD with photos won't open on Windows computer
I inserted a CD into my Powerbook. I dragged a folder with photos onto it and burned it. On my Macs it opens fine. Someone tried to open it with their Windows computer but couldn't. Any ideas? But I did send a different CD with the same files, made t
-
Custom fields in Report painter in CCSS table
Hello Experts, I am in a processes of developing a report painter with custom fields in the selection screen. The custom fields are available in PRPS table. With hard difficulties I brought the custom fields in selection screen of the report painter.
-
Hi all, I'm setting up an 'Advanced Search' feature using a filter function and need some help with the logic - seem to be suffering a brain fade... There's a search form with (let's say) 4 different options: Name, Description, Price, Features. I wa