How to split a movie in the project window

I spent a lot of time dragging clips up into the project window, inserting lots of title frames, and editing clips. When exporting to iDVD discovered that the projet is 2x too big. How do I split the movie into two halves in the project window without having to re-do the whole project?

Exit your project so your are back at the Project Library List. You should see your project as a filmstrip in the list. Right-click or control click on your project name and select Duplicate. You will now have 2 copies of your project. Duplicate it again to be safe.
Then, delete the first half of one of the duplicates, and delete the second half of the other duplicate.

Similar Messages

  • How do I add another movie to the project area to work on without it being attached to a previous project?

    How do I add another movie to the project area to work on without it being attached to a previous project?

    No.  I have a number of items in the Event Library.  I am trying to move some of them to the Project Library and when I do it attaches itself to the other project I have there.

  • How can I transfer movies from the apple tv to the ituenes, to watch in the ipad?

    how can I transfer movies from the apple tv to the ituenes, to watch in the ipad?

    Is this a rental or a purchase?
    Rentals on ATV cannot be transferred.
    The 2nd and 3rd gen model do not have accessible storage. Some movie purchases are stored in iCloud (if you live in the US) where you can reload in iTunes on your computer)
    If you own the 1st gen aluminum model then it should be set to sync
    http://support.apple.com/kb/HT1143

  • I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks.  I am unable to find where and how to do this without losing the project I have been working on.  Please help?

    I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks.  I am unable to find where and how to do this without losing the project I have been working on.  Please help?

    Vere Clarke
    Premiere Elements 9.0/9.0.1 and Premiere Elements 13 are standalone products.
    So, you can have both on the same computer, but only open one for your work.
    The classical recommendation is to finish a project in the version in which it was created since there
    is no guarantee that a project from an earlier version will open in the later version. Probably will, but
    no guarantees. And, when you do explore this, do it from a copy of the earlier version project. Once you
    take the earlier version project into a later version one, you cannot go back to edit the later version edited
    project in the earlier version program.
    If you have both versions (9 and 13) on the same computer and you have not moved, deleted, renamed any of the version 9's files/folders,
    right click the saved closed Premiere Elements 9.0/9.0.1 project file, select Open With, and then Adobe Premiere Elements 13.
    (Your 9.0/9.0.1 saved closed project file should be found in Libraries/Documents/Adobe/Premiere Elements/9.0.)
    Please review and consider. If any questions or need clarification, please do not hesitate to let me know.
    Thank you.
    ATR

  • How to create a validation for the project coding mask

    Hi,
    Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
    project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
    mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
    The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
    How can we go about this?

    Hi Jacquiline Bersamin,
    You can use validation with the combination of the level and the coding mask.
    In the validation:
    Pre requisite: WBS level = 1
    Validation: Prps-posid = prps-posid :1-12:
    Message : Error
    If required you can give the parameters for your detail error message.
    Please let me know if this does not work.
    Thanks
    Regards
    Srinivasan Desingh

  • How do I get the Project Window of iMovie '11 functioning properly?

    The scrubber in the Project Window runs painfully slow. It has to think about literally every movement, but if I just hit Play it will run smoothly. The scrubber in the Event Window also works fine. I had thought it was because I didn't have enough space in the Startup Disk, but I've cleared it out and nothing's changed.

    If you had iMovie 9 and upgraded to Mavericks, iMovie 9 should still be in your Applications folder  in a folder called imovie 9.0.9.  You can still use it and your Events and projects folders should still be present.
    Geoff.

  • How to understand the "New Item" icon at the bottom of the Project window

    I'm trying to understand that small "New Item" box at the bottom of the project window better. I'm aware that when I bring video clips into my project, if I drag them to this box, PPCS5 will add them to the timeline. I partially understand the positive reasons for doing so, primarily that PPCS5 will correctly identify the type of video being brought into the project. I know that if I select all my clips and drag them to the new item box, that all my clips will be added to the timeline at the same time and all together on the timeline. There are many things I don't understand about it. If I add my clips one by one using the "New Item" icon, they will show up as separate sequences on the timeline. If you try to add another clip at a later time, can that clip not be added using the "New Item" box?  One other question is what would be the advantage in putting clips on the timeline as separate sequences? And one further question is do you drag other items to this box besides video clips? Like music, and still images?

    Dragging something to the New Item icon doesn't just add that something to a sequence.  It actually creates the correct sequence for the something to be added to.
    You do this once, when you need a new sequence.  Anything else you want to add to that sequence you do by other means.

  • How to open QuickTime files in the Footage window on Mac

    Using CS4 on the Mac when I double click a QuickTime HDV video clip in the project pannel it opens it in a separate window how can I open it in the Footage window?
    Thx
    Kevin

    The CS4 (or CS3) help can be used to search the entire Community, or restrict the search to their own help system.
    Just enable the checkmark near the top right of the page (to search "this system only").
    Also, there's a link at the top of the help page to download a .pdf version of the help files (for local use).
    Having the help files online allows other people to add useful comments, and those who write the help files to update them as needed.
    This helps keep them current, and ever-improving.
    Check out the download and search restriction links!

  • IMovie showing one thing on the project window and different one in preview

    I have create an iMovie project with iMovie 08. On the project window I could see my pictures as I have imported, in the perfect order and with the correct orientation. I just installed iLife09 and I opened the project on iMovie09. The project window shows pictures in a random order, the orientation of some pictures are wrong (upside down, portrait etc). But to my surprise if I play the video or move the mouse over the pictures it shows the correct picture on the preview window.
    What's wrong ?

    I'm having a similar problem. Any fixes?

  • I can't shorten my photo clips in the project window.  Why not?

    I have video clips and photos in the project window and at some point each photo doubled and when I just any form of "clip adjustment" for length it does not stick.  I checked the fact that I wanted each photo to only last 4 s in the movie every one of them is a different time that I can't change.

    Beste,
    Ik heb Photoshop CS6, maar blijkbaar wordt mijn camera Canon EOS D650 niet ondersteund.
    Mvg,
    Op 14-jan-2015, om 21:39 heeft Ronald Keller het volgende geschreven:
    I can't open my photo's in Bridge because the camera (Canon EOS D650) RAW file is not recognized?
    created by Ronald Keller in Bridge General Discussion - View the full discussion
    Welke versie van Photoshop heb je? Voor die camera heb je minstens CS6 nodig.
    Camera Raw-compatible Adobe applications
    Camera Raw plug-in | Supported cameras
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7096583#7096583 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7096583#7096583
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Bridge General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Suddenly my project window has no scroll bars, and if I return to the project library, select my project and click edit, another project LIBRARY appears partially covering the project window.  Help.

    In the middle of making a movie, the scroll bars vanished in the project window and I could no longer navigate at all.  If I went to the project library and selected the project, another image of the project library slid in and entered onto my screen.  after repeated attempts to open the project in various ways, I have it now, but there are holes in the project window (blank background) and no scroll bars.  It does not respond to anything.
    can someone help?

    I'm adding more information:
    in Finder, my iMovie folders are all visible and accessible.  When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip.  ALL my video is not missing - it just isn't showing up in the Event Library!
    This happened all of a sudden, while I was working on iMovie project (on both computers).
    All my Projects are intact, and play when I open them. 

  • How to  show additional items in the same window using stacked canvas

    How to show additional items in the same window using stacked canvas.
    My content canvas has 14 items, and I have to include more.
    I want to know how I can use a stacked canvas to show these additional items in the same window, so that I can scroll through horzontally , as if all the items are on one canvas.

    Well, I intially navigate into my content canvas. At this stage the stacked canvas is not visible, then how should I navigate to an item on the stacked canvas to make it visible?

  • How do I get rid of the adjust window in iphoto.  It is stuck there and it won't go away.

    How do I get rid of the 'adjust' window on my photo.  I click on the x and it does nothing.  Is it hung?  I thought apple didn't hang.

    Close iPhoto and do the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    OT

  • I selected a clip in the Project window in iMovie 11, opened the Clip Trimmer for that clip, chose the part of the clip I wanted to keep with the yellow bars, and "trim to Selection" in the menu bar is light grey so I can't complete the edit. I'm using a

    I selected a clip in the Project window in iMovie 11, opened the Clip Trimmer for that clip, chose the part of the clip I wanted to keep with the yellow bars, and "trim to Selection" in the menu bar is light grey so I can't complete the edit.
    I'm using a MacbookPro so can't right click to highlight (as was suggested in this forum for the same problem) and can't seem to highlight that area. What do I do?

    When using the Clip Trimmer, you click DONE to indocate that you are finished.
    The Trim To Selection is a great tool and I use it all the time, but you use it in the main project timeline, not the clip trimmer. Just select the frames you want so that the yellow border is around them. Then right-click and select Trim to Selection.

  • Select a range from the Project window in iMovie 10.0.3

    In iMovie 10.0.3, I can no longer select a range of frames from the Project window; when I left click, the whole clip highlights yellow.  I can still shorten the clip from the ends, but not select any range within the clip.  What gives? Thank you.

    GOOD GRIEF!  That did it, THANK YOU!  I wonder why they added this 2 second delay in the current version... regardless, THANK YOU SO MUCH!

Maybe you are looking for

  • Can't open animated GIF, even with secret trick (psd cs3)

    Hi I know a lot of people have had trouble with opening animated .gifs in photoshop cs3. I had that problem until I learned the little "trick" you could do (type *.* in "import video frames to layers") and then simply open the gif. This has worked on

  • Isse in Inbound proxy

    Hello Experts, I have one query regarding data transfer. Actually we are transferring data from PI to SAP using proxy. The data is sent from PI & accepted using proxy in ECC system. From that proxy we need to pass data from proxy to Z-Program. Can an

  • Printing Parameters on reports

    Post Author: n8than1 CA Forum: Publishing Hello, I'm new to CR and I've created a report that has some parameters the user can select.  How can I get these parameters to print on the report?  If I drag/drop the parameter field it only shows the first

  • Why Photoshop Crashes with Cintiq 24HD  ???

    Hi there I've recently bought a Cintiq 24 HD screen tablet to work on digital art, but after getting it installed, when opening any Photoshop version, it crashes inmediately. I'm using Windows 7 updated properly, and also tried several Cintiq 24HD dr

  • Database does not open when starting NT service

    Database does not open automatically when starting NT service. It can be opened manually only, through the one of administrative utilities. Can this problem occur due to small SGA size? (in my case - 32 Mb) OS: Windows NT SP6 Database: 8.1.6 Ilya.