How to split a page in half / How to print half-pages at a time?

So I'm trying to correct a student's mistake without causing major headaches. Her book is laid out in pages 1 - 10. But the problem is that each page on InDesign is supposed to be *2* pages in print. So (for example) Page 1 in InDesign contains print pages 1 and 2; Page 2 in InDesign contains print pages 2 and 3; etc.
Can any of you clever people think of a quick way to solve this? I think of a *very* tedious and hacky way to get the print to come out correctly, but I'm hoping that I'm missing something.

Make a new facing pages file with the correct page size, then place the pages from the original doc across the spreads. You'll need to either turn off shuffling or set the start page number to something even to get all two-page spreads.

Similar Messages

How do I get my HP Photosmart 7960 to print the page numbers on a multi-page project?

How do I get my HP Photosmart 7960 to print the page numbers when printing a multi-page project?

Hi,
This has most likely nothing to do with the printer but with the program you are using to print. For example Word has a setting for this, so let me know which program and I might be able to check for you.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Pages '09 Templated Forms Not Printing in Pages 5.5.2

I have an older Macbook Pro (circa 2009) running OSX 10.10.2 and Pages 5.5.2. I am connected to a Canon MX320 printer. While running my iWorks 09 version of Pages, I created a template that allowed me to print customizable checks. I setup a template with customized settings (2.75" X 6.0" paper, 0" margins on all sides). I would open the check "form", enter the payee, amounts, date, memo, then place the blank check into the printer and the check would print. Since I upgraded OSX and Pages, my template no longer works. The blank check slides through the printer with no printing being done. I have tried changing the orientation and paper dimensions but I am unable to print with the defined paper size. It will print with a larger sized paper (it doesn't seem to recognize the small form size). I seek possible solutions.

Then if you have exhausted all possible tests and printer drivers, go with what works, use Pages '09 and get a bonus 100+ features.
Or switch to another application that does the job and has a long term future (hint not Pages 5).
Peter

How to print specific pages of a pdf from a vb 2013 program using a print dialog

Hi. I am using the acrobat sdk to display pdfs from within a vb 2013 program, because the pdfs are large and we have developed indexes on certain columns. The indexes are stored in SQL tables. My program has a search window which allows the user to search for a value and displays all the pages on which this value appears in the indexed column in a listbox. By double-clicking on the desired value in the listbox, the user can go to the selected page and column. However, the user also needs to be able to highlight one or more of the pages in the listbox and print these pages. I could do this silently using AcroExchAVDoc.PrintPages, but the user also needs to have a print dialog displayed in order to possibly select a watermark to be printed on the pages. I also need to default the orientation of the pages depending on the document.
I have reviewed the sdk documentation and also searched in Google and on this site but have not found a way to do this. Does anyone have a suggestion? Thanks for any help you can provide.
Mary

Hi.
I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages, I end up having to bring up the print dialogue multiple times and have the user set watermarks each time.
I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window. This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once. However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone. This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc. I do not really want to include these icons on the toolbar. Is there a way to remove unwanted icons from the toolbar, or make them invisible?
Hope this makes sense. Thanks for your help.
Mary

How can I get bi-fold greeting card to print?

I have Elements 9 and created a card in bi-fold format and cannot figure out how to get it to print in that format. I have a Dell V715W printer. Photoshop help is of no help. I am trying to figure out if I need to print add a blank page to the front and print two pages to one sheet (front and back) or something else. There don't seem to be many options when printing or edit options to the file/project/card within Elements 9. Help!!

Riley,
Finally got a reply of sorts from Tech. To sum it up, Adobe has a problem . . .
"We have verified this behavior. and we are checking with the engineering group whether this is considered a bug or not. When creating one of the folding greeting cards, these are templates designed to be printed by Shutterfly. Because of this, the layout is meant for their printers to work correctly. It is not optimized for local home printing.
. Meanwhile, you can either use the print service (shutterfly), use the workaround of using the .PSD files, or to create the greeting cards without using a shutterfly template.
As a work around, you can save the greeting card project as a .PSE file (by clicking the Done button and choosing to save). When you save a multi-page document in PSE, you get a .PSE project file and a folder with the same name. In that folder is a .PSD file for each page in the project. If the customer opens and prints these they will get the expected behavior of two pages (instead of three), but the front page will not automatically print on the lower half of the page, that will have to be adjusted either in the print dialog (recommended) or by manually increasing the canvas size in the Editor. Duplex printing is not supported by Photoshop Elements, so you will have to consult with your printer manufacturer for instructions on how to best perform this."
So, the home printing - at least using their templates - doesn't work properly in Elements 9.
Hope this helps.
Wills 001

Message- Print No pages from the document were selected to be printed

I have had this application for some time, simply never used it. Last night I tried converting a PDF file to word, unsuccessfully, I might add.
Today, whilst printing a page, my printing settings appear to have been reset because when I selected Print selected page, the following message appeared:
Print
No pages from the document were selected to be printed message
How do I reconfigure my settings to preview rather than defaulting to PDF? Kindly advise. Cheers.

I have only been able to print by exporting from iphoto. I have a new HP printer and there is software that supports photo printing ("HP photo smart") and I have been able to do it this way. On some occasions I have been able to use the iphoto>print>then preview before actually printing. There is a print option on the preview pane and that has worked on occasion...unsure why it doesn't work always. Please pass on any other hints, or let me know if this works for you!!
G4 Power book 867Mhz Mac OS X (10.3.9)

Print Multiple Page From Different Trays

Dear Sir . / Mom
How are you ? Hope everything goes well with you !
I hope this massage will find you as soon as before happy and healthy for you and family .
and every thing is OK .
Tanks so much for your good support
Please send your answer to my email ( please )
{Personal Information Removed}
I have a very big problem
I have a project that the engine of this project is HP Laser ( 2055 )
As you know :
In the laser jet we have 2 input ( tray 1 ( manual )   & tray 2 ( in caste ))
I have 10 page on one time for print ( 10 page printing continually ( a letter in 10 page ))
==================================================
But I want page no. 1 printing from tray 1
Page 2,3 printing from tray 2
Page   4,5 printing from tray 1
Page 6 printing from tray 2
Page 7,8,9   printing from page 1
And page 10 printing from tray 2
10 page is 1 document and printing should be in one time
=========================================================
Note :
I would like inform you that
1      -     There are a software that I can do this program
The name of this software is trayselector
And you can download the free software from the bellow address
http://www.trayselector.com/download.aspx
but this software is working on Microsoft word
and it isn't useful for me because
My software language is JAVA .
2     -   in the printer setup ( printer driver )
You can set printing the first page in tray 1 and other page printing on tray 2 (only )
It is not usefully for me too
Because I need use different tray on different time for different page . (PLEASE SEE RED )
So :
Your product isn’t useful for me
I need a procedure for JAVA Software program
Please help me
And tell me what I should be do
I would like inform you that : our model of our printer is :
HP Laser 2055
Please send your answer to my email ( please ) as bellow address :
{Personal Information Removed}
Thanks so much
Touraj asrani

This forum is more focused on consumer level products (and issues). You may have better results asking in the Laserjet Small/Medium Business Support Forum here.
If you are printing directly from a Java app you will probably need to embed tray selection codes as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Officejet Pro 8500 A910 - when printing 3 pages, skips page 2.

Hi, I have looked on the online help, the printer itself and the print settings but cannot see how to get the printer to collate the pages correctly when printing double sided. At the moment 4 pages print correctly front and back on 2 pieces of paper, however when only 3 pages are needed it will print on page 1, then 3&4 double sided instead of page 1&2 Double sided and a single side on page 3.
Any help would be appreciated. We are an office of 5 people working on Mac OSX 10.7.5. Printer is:
Officejet Pro 8500 A910

Hey there Trubbs,
I have a few more steps in mind. Here they are in order I suggest them!
Mac OS X: How to reset the printing system
Repair disk permissions
Restart your Mac
Re-add the printer and test again
Hope that does the trick
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing in Pages - Missing page numbers

I've been having a problem printing from my MacBook using Pages 08 to my HP PSC 2210 physically connected to a networked PC (using the Gutenprint 5.1.3 HP PSC 2210 driver -- Which works fine normally...)
In printing a single half page of text, the page numbers show up fine.. However once I get past the end of page 1, I lose whatever is in the footer (Page # in this case) -- Even if page 8 only has a half page of text, it wont print any page #...
It almost seems that I am printing a 8x12 page on an 8x11 piece of paper... (But all the non-footer text is there, so that doesnt seem to be the case...)
I tried installing the Mac driver for the printer, but the same thing happened..
Any suggestions?

Jerry, it wasnt the "First Page is Different" thing, but in going to the layout inspector (which I didnt know about -- I'm normally a MS Word guy), I found the footer margin for the 8 page document was .31, and the Bottom Document margin was ..25 -- I changed it to Bottom=.75 and footer=.25 and it works fine...
Thanks for setting me down the right track!

Quality of printed pages from Office jet 4632 printer

I believe the alignment on my printer is off because it prints either the top or the bottom half of line and only the black content on page has issues. when i print alignment page I don't think all the content is printed on it because when i scan it the alignment always fails. Can i print the page from another sorce like the web

The troubleshooting steps in the document here may help resolve parts of lines not printing properly. If the steps there do not resolve the issue then cleaning the electrical contacts as shown in the document here may help resolve the issue. The alignment page is printed from internal patterns contained in the printer's firmware, you cannot print an alternate image for use in alignment.

SSRS 2008 R2 report does not print the page header for a html content displaying on multiple pages

Hi
I need to display the html content from the database. The html content are quite long and can have content of 3-5 pages. Issue I am facing is f the record has html content of 3-5 pages, then it does not print the page header (which is a separate tablix) on
second page onwards.
Nikesh Shah
Nikesh Shah

Hi Nikesh,
According to your description, I’m not sure the meaning of Page header in your scenario. In Reporting Services, a page header that run along the top of each page, respectively. Headers can contain static text, images, lines, rectangles, borders, background
color, background images, and expressions. But we couldn’t add tablix in the page header.
If you are saying report header, a report header consists of the report items that are placed at the top of the report body on the report design surface. They appear only once as the first content in the report. So it cannot repeat in other pages.
If you are saying tablix header, freezing column headers are different in table and matrix. For more details, please refer to the following thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c8ddc1af-1bdf-4e72-8aab-0353c7cc848a/ssrs-report-freezing-row-and-column-while-scrolling-issue?forum=sqlreportingservices
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Urgent - Not able to Print back page for Last Page in SAP Script.

Hello All,
I need to Print back page in SAP Script, I am able to do it by setting print mode as D, but now the problem is, it does not print back page for last page.
For eg. if there are 3 pages it prints back page for first two. If there is only one page then it does not print back page.
Please Help.
Thanks.

hi,
Yes, we can print logo as water mark in scripts
Just do as like this....
Upload your logo via SE78.
- Select 'Import' button from application toolbar of SE78, and perform upload.
and write this code in scripts
BITMAP 'COMPANY_LOGO' OBJECT GRAPHICS ID BMAP TYPE BCOL
regards
Sankar

Printing 1 page on screen over 8 pages- why?

Here's a frustrating print problem Yosemite:
The problem is that a single page document open On SCREEN prints multiple pages in large print size instead of the 1 page on screen
Example: Quicken 2007 updated for Yosemite has a financial one page report on screen with no indication it would take any more.
However it printed segments of the page over 8 pages;
There was NO indicator in the print areas showing it would be multiple gages I tried it again and it spread it over 4 pages.
ONLY by taking a screen shot and printing that one page screen shot was able to get the one page print to work correctly.
I've never had that problem in Quicken in other versions of software such as SL and Tiger.. And had not had it in Yosemite before.
What have I missed or overlooked????

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages)

I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

Smartforms: Printing Selective Pages

My smartform have 5 pages. My aim is print selective pages (ie page 1-3).
In the global definition -> initialization, i wrote the statement below:
OUTPUT_OPTIONS-TDPAGESLCT = '1-3'.
My problem is all 5 pages are still being printed out instead of page1 to page3. Please advice.

Hi,
With the specified way , the condition cann't work.Once check it.
In the generated FM you have parameter OUTPUT_OPTIONS-TDPAGESLCT, which is for "Pages selected for printing".
You have to call FM 'SSF_FUNCTION_MODULE_NAME' to get the generated FM name, then call this FM dynamically with the mentioned parameter.
Reagards,
Shiva Kumar

Printer keeps defaulting from a selection on another website & won't print the page. H E L P !

days ago i was in a govt site & unable to print a page. now i'm in a different govt site & instead of printing the page i selected, it continually prints the page from days ago! it's like i can't clear the queue!! H E L P !

Try to reset your printer settings
*https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox#w_reset-all-firefox-printer-settings

How to split a page in half / How to print half-pages at a time?

Similar Messages

Maybe you are looking for