How to split a page in to two in smart form

how to split a page into two in smart form, so that the data that is printed in one column when reaches the end of the column, continues with the second column?

if u r using a secondary window.........it cannot possible to split..........
if u r using a main window............sap will take care abt data flow in to second page...
if u have any restrictions to print 10 records in one page and another 10 records in another page....keep a page break....or mantion the page break in condtions tab....
reward points if helpful.............

Similar Messages

  • HOW TO DISPLAY ALTERNATIVE PAGE NO IN SCRIPT AND SMART FORM

    HI, I HAVE TEN PAGES IN SCRIPT AND FORM, I HAVE TO DISPLAY PAGE-NO IN FIRST PAGE AND 2 PAGE NO NEED TO DISPLAY AGAIN 3RD PAGE HAVE TO DISPLAY. HOW TO DO THIS

    hi......
        In Smart forms u have use "ALTERNATIVE" option for printing alternative page numbers.
        In Sapscript use coding to solve this problem,
                 if ( &page& mod 2 ) = 0
                       &page&
                 endif
    Regards,
    ARUN.

  • How can i convert  my invoice which is in smart forms to xml file

    how can i convert  my invoice which is in smart forms to xml file.

    Hi Anil,
    Please go through this link:
    1. XSF stands for XML for Smart Forms. It is important to contrast XSF with .... The eDocx script engine can provide a script to convert the file format to an 
    http://www.ossincorp.com/Black_Box/Black_Box_4.htm
    please rewrds if found helpful.
    Regards,
    Alok

  • How to insert a table with variable rows in smart form

    Hi all,
    How to insert a table with variable rows in smart form?
    Any help would be appreciated.
    Regards,
    Mahesh.

    Hi,
    Right click the mouse->create->table
    If you want 5 columns, you need to declare 5 cells in one line type of the table
    Click on Table -> Details, then do the following
    Line Type 1 2 3 4 5
    L1 2mm 3mm etc
    Here specify the width of the columns as many as you want..
    then in the header/main area of the table, click create Table Line, Rowtype is L1, automatically 5 cells will come,In each cell create a text element, display the variable to be printed there.

  • Urgent : how to calculate sub total and grand total in smart forms

    Hi Friens..how to calculate sub total and grand total in smart forms..How to print them in smart forms...Also kindly explain how to handle events in smart forms..Thanks in advance

    Re: Subtotal with Table Node in smartforms

  • How to Split the Page in Numbers

    I took a quick test drive on Numbers and stopped when I could not find the
    the little tab in the upper right corner of an Excel worksheet that lets you
    spilt the page for ease of working a page.
    Help..... how do you split the page for ease of working and reading in Numbers?
    aRKay

    I am working on making the transition to Numbers, and for the most part love the flexibility of the new program. However, this lack of being able to open a new window in the same sheet is frustrating. Let me give you my situation, and if anyone has any thoughts I'd be most appreciative!
    I run a competition that has 30+ competitors all needing separate scoresheets. Those overall scores for each group need to be summarized on a separate page. In Excel, I had a separate sheet for each competitor, and then I linked cells from those sheets to the summary sheet. This was made easy as I could have one window open with the individual competitors sheet, and another window open with the summary sheet.
    When I tried to implement this in Numbers (admittedly I approached the problem with an Excel mindset) I set up my separate sheets for each competitor, and now that I'm in the stage of making the summary sheets, I need to click on the cell in the summary sheet, find the referenced sheet in the sheet list, click on it, find the proper cell, click on it... There are over a dozen references per sheet. I have not been able to find a satisfactory work around in Numbers.
    Even if I set up each individual competitor as it's own table, and the summary as it's own table, all in the same sheet, I would still not be able to view both the summary and the competitor tables at the same time without scrolling back and forth. I'm not seeing how Numbers makes my life easier in this regard.
    Any thoughts?

  • How to split one page into different frames in ADF?

    Hi,
    Can any one please guide me how to split a jspx into different frames.
    i.e., left frame contains <af:panelSideBar> which contains multiple <af:commandMenuItem> s. And whenver we click on the one <af:commandMenuItem>, it has to show the corresponing page inside center frame in this page itself. Is it possible in ADF? Which component we need to use?
    Can anyone guide me on this?
    Thanks in advance,
    Regards,
    Suresh Kethireddy

    You can use a combination of the ADF Faces 10.1.3 components like:
    af:panelPage
    af:panelSideBar
    af:panelHorizontal
    af:panelGroup
    to organize the screen layout, but it is not the interactive splitter that the 11g product provides.
    You can all all the 10.1.3 ADF Faces Components here:
    http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/tagdoc/core/imageIndex.html

  • How to split a video clip into two separate clips?

    Whenever i enter the key word to search for split, it always shows me how to do split edit, or split screen. I do not want that. I just need to know, how to cut a video/audio clip into two pieces, so that I can cut one of them out of the time line....
    Could somebody help....
    Thanks

    I have a sandwich. I have been searching how to split the sandwich but it seems you don't split a sandwich. Someone said look in a draw for a tool or something!
    Wow.
    There are lots of ways to do what you're asking besides what has been said. You can double click the clip in the Browser. Set In & Out points in the viewer and add the Clip to the sequence. No need to split or cut anything in the sequence.
    You really need to learn a bit more before you continue cause this is a pre-noob question. I don't really know how to categorise it.

  • How to split a "project" (movie) into two separate projects.

    After converting two Hi-eight tapes into digital format for use with iMovie 10.0.3 (?), I created a movie called "Japan 1994" , complete with titles, imported still photos, etc. But it was over 2 hours long. (My wife considers any movie longer than 29 minutes 59 seconds as cruel and unusual punishment under the U.S. constitution). So I went to Imovie "Help" .....Hah!!!, surfed the web with my problem, with further frustration. So, I devised my own method:
      1. Created two new (empty) movies, "Nihon 1" and "Nihon 2" (Nihon=Japan, in Japanese)
    2. In  "Japan 1994", found a convenient break point rougly half way through, shift selected several clips up to the half way point.
    3. copied all of these at one time (command C)
    4. Opened "Nihon 1" and pasted (command V) these clips into this project.
    5. Repeated steps 2, 3, 4 for the second "half" (into "Nihon 2")
    All of this produced two separate projects of around 1 hour each. Added appropriate titles at the beggining and end of each of the new movies.
    Worked like a charm.
    Hope this helps other users of iMoive 10. (whatever).
    lawrence268

    I have a sandwich. I have been searching how to split the sandwich but it seems you don't split a sandwich. Someone said look in a draw for a tool or something!
    Wow.
    There are lots of ways to do what you're asking besides what has been said. You can double click the clip in the Browser. Set In & Out points in the viewer and add the Clip to the sequence. No need to split or cut anything in the sequence.
    You really need to learn a bit more before you continue cause this is a pre-noob question. I don't really know how to categorise it.

  • How to split a PE1 project into two smaller projects?

    I have a 1hr 36 min. project in PE1.  I want to split it into two different projects of about 48 min. each and burn two DVDs.  My intent is to get a better MPEG resolution for these smaller projects.
    Can I select half of the timeline, cut it and paste it into a new project?  Would the effects be preserved?  I have a week of work invested in this project and I don’t want to screw it up!
    Thanks
    Fred J.

    FredJ,
    Welcome to the forum.
    I agree with both Neale and Steve, though it might at first appear that they are saying two different things.
    The bit-rate in the Transcoding to MPEG-2 will be determined by the Duration of the Timeline and the capacity of the blank media, whether DVD-5, or DVD-9. In most versions of PrE, this bit-rate will be a function of the Quality Slider, but the ultimate bit-rate for the combined video and audio is set in the DVD-specs. One cannot exceed about 8 b/s.
    Now, with your Duration, there might be a very slight increase in the bit-rate, were you to take Neale's advice and break your Project into two parts, however, I think that his advice to study the result of your entire Timeline is good, as I doubt that one could tell the differences, unless you have a great deal of fast motion, of either the camera, or the subject, and then it's likely that the quality would appear to be the same to the human eye.
    Steve is correct in that the result will have to be within the DVD-specs, and will only be 720x480, at up to that max. bit-rate. That is as good as it gets.
    For the ultimate test, I would take Neale's suggestion on Burning to Folder one step further. Once that is done, you can first test your Project with a DVD software program on your computer. BUT, be aware that you are viewing on a higher-rez, progressive computer monitor, and its rez will exceed that of a TV and that of a DVD-Video disc. Thus, it is not a perfect test. To get an idea of how the DVD will look on a set-top player, hooked to a TV, you can either, also burn to a DVD RW (rewritable disc) to test on a set-top player, or you can use the free burning utility, ImgBurn, to burn to a DVD RW and test. The reason for the Rewritable media is so that you can reuse it for testing. You will NOT be using this disc for delivery, but just for testing. Now, if you feel that very slight decrease in bit-rate is noticed, you can go back to his suggestion on how to split the Project, and then produce a multi-disc. set for the Project.
    Also, the ultimate quality and also playability of the DVD-Video will be enhanced if you use quality blank media. I strongly recommend Verbatim, or Taiyo Yuden blank media. Brands like Memorex, TDK, recent Ritek and ALL "store-brands," are to be avoided. One is also best served by buying slower speed media, as PrE will measure the speed of the media and the speed of the drive and try to get you the fastest possible burn. It does not allow you to set the speed of the burn manually. Most people feel that stepping down from a max. burn speed produces a better DVD. I routinely will drop the burn speed (in other software) to about 1/2 of the max., and have had thousands of perfect DVD's. One can set the burn speed in the above mentioned ImgBurn utility.
    To distill the above: try it and see if your Project isn't perfect now, and if not, then break it apart into two segments. I doubt that you could tell the difference.
    Good luck,
    Hunt

  • How to limit the number of rows in a smart form , sap script.

    Can anyone tell me how to limit the number of rows in the output of a sap script/smart form. I have tried "protect/endprotect" in sap script but have no idea of how to do in smart form. In sap script the only way it has happened is by reducing the size of the main window.

    Hi,
    In Smartform also, why dont you try reducing the size of the window if you want to limit the rows in it. Also if you are printing Line Items in a LOOP, you can write
    LOOP AT T_ITAB FROM 1 TO N in the LOOP Node if you know how many records exactly you want to display in 1 Page processing.
    regards,
    Mahesh

  • How to drag global data in text editor in smart forms

    Hello friends,
    I am doing a smartform. I tried to drag the global data from field list and drop it in text editor but its not working.
    can you please help me how to do that or is it need any extra settings?
    Please help me friends.
    Thanks,
    Manisha
    Edited by: PATIL MANISHA on Apr 23, 2010 12:14 PM

    Hi Manisha,
    It is looking very strange. But still try to do following may be helpfull.
    1. First activate your smart form after declaring the variable in Global definition. Then try to drag n drop from Field list
    2. Or else click on Editor tab of Text node, Then Goto-> change editor (You will get a editor same as Sapscripts)
    put the variable like that:
    HT : &W_TOTAL-MASSG&
    Try this. Best luck...
    Regrads,
    Lokesh.

  • How to split PDF pages into separate pages?

    I have a PDF document that is in booklet format (i.e., front cover and rear cover on a single page) with two pages to a single 8-1/2 X 11 page size. Is there an application that can split the double pages into separate PDF pages? I don't want to use screen capture to create separate PDF's if there is a better way.

    There are a lot of utilities for PDF files so you might search at CNet Downloads or MacUpdate to see what's available. PDF Clerk and PDF Pen may let you drag each page out of the document as a separate file. Even Preview may let you do the same.

  • How to split the AP invoice into two invoices

    Dear All..,
    Can you tell how can i split the AP vendor invoice which i was posted erlier..i want spil the invoice into two invoices to pay the partial payment to some amount..
    For ex : i have poste one invoice with 50000/- rs..and now i want to split this doc into two like 30000 and 20000, and i want to made the payment for through APP for 30000..
    Can you tell me the step how to do this..
    Advanced thanks
    Bhargav

    If you reverse the original vendor invoice ( credit memo), you can create a new vendor invoice by splitting the amounts with different payment methods. This way APP will pick up only required amount.
    Amount split in vendor invoice can be done by activating "Enable amount split" in OBY6 configuration. This will give you an additional tab "Amount split" in vendor invoice.
    Hope this helps
    Thanks,
    Kalyan

  • How to split a page in half / How to print half-pages at a time?

    So I'm trying to correct a student's mistake without causing major headaches. Her book is laid out in pages 1 - 10. But the problem is that each page on InDesign is supposed to be *2* pages in print. So (for example) Page 1 in InDesign contains print pages 1 and 2; Page 2 in InDesign contains print pages 2 and 3; etc.
    Can any of you clever people think of a quick way to solve this? I think of a *very* tedious and hacky way to get the print to come out correctly, but I'm hoping that I'm missing something.

    Make a new facing pages file with the correct page size, then place the pages from the original doc across the spreads. You'll need to either turn off shuffling or set the start page number to something even to get all two-page spreads.

Maybe you are looking for