How to split a project

I have a project I'm trying to burn with Idvd but it is too big and it would not burn it even using a double layer disc and changing the encoding setting on project info. is there a way in imovies to split my already edited project in two so I can burn it using two disc I don't want to re edit my project again.

Right click on your Project Name and select "Duplicate". You now have two identical copies of your project. Delete the first half from one. Delete the second half from the other.

Similar Messages

How to split a "project" (movie) into two separate projects.

After converting two Hi-eight tapes into digital format for use with iMovie 10.0.3 (?), I created a movie called "Japan 1994" , complete with titles, imported still photos, etc. But it was over 2 hours long. (My wife considers any movie longer than 29 minutes 59 seconds as cruel and unusual punishment under the U.S. constitution). So I went to Imovie "Help" .....Hah!!!, surfed the web with my problem, with further frustration. So, I devised my own method:
1. Created two new (empty) movies, "Nihon 1" and "Nihon 2" (Nihon=Japan, in Japanese)
2. In "Japan 1994", found a convenient break point rougly half way through, shift selected several clips up to the half way point.
3. copied all of these at one time (command C)
4. Opened "Nihon 1" and pasted (command V) these clips into this project.
5. Repeated steps 2, 3, 4 for the second "half" (into "Nihon 2")
All of this produced two separate projects of around 1 hour each. Added appropriate titles at the beggining and end of each of the new movies.
Worked like a charm.
Hope this helps other users of iMoive 10. (whatever).
lawrence268

I have a sandwich. I have been searching how to split the sandwich but it seems you don't split a sandwich. Someone said look in a draw for a tool or something!
Wow.
There are lots of ways to do what you're asking besides what has been said. You can double click the clip in the Browser. Set In & Out points in the viewer and add the Clip to the sequence. No need to split or cut anything in the sequence.
You really need to learn a bit more before you continue cause this is a pre-noob question. I don't really know how to categorise it.

How to split a PE1 project into two smaller projects?

I have a 1hr 36 min. project in PE1. I want to split it into two different projects of about 48 min. each and burn two DVDs. My intent is to get a better MPEG resolution for these smaller projects.
Can I select half of the timeline, cut it and paste it into a new project? Would the effects be preserved? I have a week of work invested in this project and I don’t want to screw it up!
Thanks
Fred J.

FredJ,
Welcome to the forum.
I agree with both Neale and Steve, though it might at first appear that they are saying two different things.
The bit-rate in the Transcoding to MPEG-2 will be determined by the Duration of the Timeline and the capacity of the blank media, whether DVD-5, or DVD-9. In most versions of PrE, this bit-rate will be a function of the Quality Slider, but the ultimate bit-rate for the combined video and audio is set in the DVD-specs. One cannot exceed about 8 b/s.
Now, with your Duration, there might be a very slight increase in the bit-rate, were you to take Neale's advice and break your Project into two parts, however, I think that his advice to study the result of your entire Timeline is good, as I doubt that one could tell the differences, unless you have a great deal of fast motion, of either the camera, or the subject, and then it's likely that the quality would appear to be the same to the human eye.
Steve is correct in that the result will have to be within the DVD-specs, and will only be 720x480, at up to that max. bit-rate. That is as good as it gets.
For the ultimate test, I would take Neale's suggestion on Burning to Folder one step further. Once that is done, you can first test your Project with a DVD software program on your computer. BUT, be aware that you are viewing on a higher-rez, progressive computer monitor, and its rez will exceed that of a TV and that of a DVD-Video disc. Thus, it is not a perfect test. To get an idea of how the DVD will look on a set-top player, hooked to a TV, you can either, also burn to a DVD RW (rewritable disc) to test on a set-top player, or you can use the free burning utility, ImgBurn, to burn to a DVD RW and test. The reason for the Rewritable media is so that you can reuse it for testing. You will NOT be using this disc for delivery, but just for testing. Now, if you feel that very slight decrease in bit-rate is noticed, you can go back to his suggestion on how to split the Project, and then produce a multi-disc. set for the Project.
Also, the ultimate quality and also playability of the DVD-Video will be enhanced if you use quality blank media. I strongly recommend Verbatim, or Taiyo Yuden blank media. Brands like Memorex, TDK, recent Ritek and ALL "store-brands," are to be avoided. One is also best served by buying slower speed media, as PrE will measure the speed of the media and the speed of the drive and try to get you the fastest possible burn. It does not allow you to set the speed of the burn manually. Most people feel that stepping down from a max. burn speed produces a better DVD. I routinely will drop the burn speed (in other software) to about 1/2 of the max., and have had thousands of perfect DVD's. One can set the burn speed in the above mentioned ImgBurn utility.
To distill the above: try it and see if your Project isn't perfect now, and if not, then break it apart into two segments. I doubt that you could tell the difference.
Good luck,
Hunt

How can I split a project. In iPhoto one could choose that option from the Events dropdown on the toolbar

How can I split a project? In iPhoto I could use the Event tab in the tool bar and there was an option to split the event but I can't find it on Apeture 3.

Hi Wayne. Aperture and iPhoto differ in many -- perhaps all -- ways. They were designed (afaict) with radically different users in mind.
To move images into a new Project, select them, then execute "File→New→Project" and check "Move selected items to new project".

How to split project or movie

How do I split a project movie to make it fit into one DVD of 4GB? Mine is currently 2hrs and 11 GB. Thanks.

Raj,
Answers to follow-up questions:
1. Yes you do. If you do it via the GUI: Right click on Run in Script.java > Add > Other > General > Run Script and then navigate to where in your repository you saved the LoginScript.java file, you will not need to add it to Script Assets as it will do it automatically. It's basically two roads that lead to the same place. If you do add all your scripts to the Script Assets, then when you click Run Script, they will all be at your disposal and you will not need to navigate through your repository to find them. (Also, note that once you have clicked the Run Script for the first time in this project, it will essentially add it to your "recently used" items so if you want to add another "Run Script" command, you simply Right click as before > Add > Run Script [it will appear at the higher level].
2. Yes. As long as you can direct your new project to where it is saved you can reuse it over and over again. This is the power of Object Oriented Programming and what makes Oracle ATS (with Java) a powerful tool.
Final question: Yes, that is exactly the Test Starter Kit I was referring to. Download it and extract it into your Databank. You can then look at how it is structured and follow their design if it suits your needs.
Let me know if you need me to clarify anything!
Best,
Johnny

How do I split a project in IMovie into two projects? When I try to burn a DVD RDL in IDVD, it tells me the movie is too long.

I am running IMovie 8.0.6. (OS X Mavericks 10.9.5) How do I split a project into two projects? When I share it in Media Browser to IDVD, and try to burn a DVD- RDL, it keeps telling me the project is too long. Do I split it in IDVD and how do I do that?

AppleMan Thanks very much for the information, however I could't make it work. I followed your instructions to the letter, in fact I tried every which-way. I created a dedicated file into which I copied and pasted the project from "package contents" but it was still greyed out when I went to retrieve it. I also found that the file size was reduced to only a few Kb. Any further step-by-step instructions would be appreciated as I am obviously doing something wrong. Babowa It appears that in imovie everything has to be "finalised" before it can be used or shared elsewhere in the same way as a disk has to be to be played elsewhere. Funnily enough an MOV file I converted to Mp4 was not greyed out and I was able to import it.... an exercise I am not keen on because of resolution loss during conversion

How can I burn a 60 min Hd video on a PC at best quality, I can't split the project in the timeline.

How can I burn a 60 min Hd video on a PC at best quality, I can't split the project in the timeline?

Harbi
I replied long before post 7, but my reply did not get posted...instead it remained unsent. I have been having computer Internet connection problems. I was able to recapture it from restore feature of posting. Below is what I wrote.
Thanks for the reply.
Just in case note....for a regular DVD player, granted it is important to have a video format that the player supports (namely DVD-VIDEO format); however, the other half of the consideration...the player needs to support the disc type (media type) that the video format is on. I do not know of a regular DVD player that supports DVD-VIDEO on a memory stick.
If you have recorded PAL 1080i (1920 x 1080 @ 25 interlaced frames per second), that interlaced video exists with Field Order: Upper Field First.
But, you end product DVD-VIDEO is characterized by Field Order: Lower Field First. If you run into this type of Field Order problem, then there are 2
possibilities to get that taken care of
a. Assuming that you are using Premiere Elements 11, 12, or 13....set the project preset (manually) to
PAL
Hard Disk, Flash Memory Camcorders
Full HD 1080i25
or
b. Import the source media using
PAL
AVCHD
Full HD1080i15
and then, for each Timeline 1080i, right click it, select Field Options from the pop up menu, and then select Reverse Field Dominance.
When you export to file, you lose the opportunity for menus. The only export to file with menus is found in the webDVD export which is
in reality a flash file with menus. That might be a consideration for playback through the web browser such as Internet Explorer or Firefox.
If putting a file on a memory stick is a working possibility, you might want to look also at AVCHD.mp4 1920 x 1080p25, but all depends on the
support of the player.
Lots to think about. If you need clarification on any of the above, please do not hesitate to ask.
ATR

During import, how to auto split one project into multiple albums based on date?

I believe I've done enough aperture reserach to get all my terminology right, so here goes...
I've created a file structure within the aperture inspector the the tune of:
Year [folder], Type of event (Occasion, special occasion, holiday, vacation) [folder], Project (Wedding), Album (i.e. Day 1, Day 2 or Pre wedding week, event, honeymoon).
I also have entire months with 7 or 8 pictures each day, that are of the same type/project (random dog pictures) but are distinctly different days (albums - day in park, in bed at night, watching movie).
My question is, can I import one project with multiple albums already created based on the date they're taken. As I can see it, all I can do is split individual projects automatically by date. But what if one project is over one month, but has multiple distinct days that would be ideal for albums? One more example. We did a trip to San Fran. One day was touring the city, one day was a concert, another day was touring the city. All one project, but 3 different albums (in my mind). I had to import as one project, then separately go in and make albums. I would like that done automatically.
My suspicion is that I can not natively do this within aperture, and that I would need something called an "applescript." I haven't done any reserach into that area, so if that's the case and you know where I can find a script that would do this, I'd appreciate the help.
Sorry for the wordiness, just wanted to be clear. Thanks for any and all help!

Hi,
You need to create a new requirement in tcode VOFM for that, together with your ABAP consultant. This requirement will be used in copy contol.
http://saptechsolutions.com/pdf/VOFMCopyRequirementRoutines.pdf
MdZ

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

video
What version of Premiere Elements do you have and on what computer operating system is it running?
Please review the following workflow.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
But please also determine if your project goal is supported by
a. format of your source
and
b. computer resources
More later based on details that you will post.
ATR

How to split a line item to 2 line item.

Hi all !
I have a request, help me please !
In system I have a invoice with 1 line item value 1000 USD.
Customer payment 600$. a incoming payment with value 600$ will post to system.
I want incoming payment and invoice will auto clear 600$ but system can't auto clearing because value is not Identical.
I want line item of invoice will split to 2 line item. Line item 1 value 600$ and line item 2 value 400$.
Line item 1 of invoice will auto clear with incoming payment and system will exist a invoice with 1 line item value 400$.
How to split a line item to 2 line item ? Have FM for split a line item to 2 line item in SAP ?
If you have other solution for this request, help me please !
Thanks !

Hi,
Have a look at Split line item - Sales Order
Regards

How to create a Project in Development system?

Hi,
I am starting my development on client system.
Whenever i try to create infoarea or cube or catalog or whatever it is asking for request.
before creating request, Project must be created plz tell me how to create a project?
whats the relation between project and package?
And one more question...if i want to avoid asking requests then what settings must be done so that after all development is over i can transport to quality system at time.
PLZ provide me the solution for above mentioned queries.
Thanks in Advance,
Vijaya.

Thanks Tony.
Please tell me in details or send me a document regarding this...what shoud be done in SE06.
Here there are 2 options:
1)Standard installation
2)Database copy or database migration.
and there s a option system change option.
I am not getting the idea of this what can be done by clicking on system change option and perform post installation actions?
plz help me out.
Thanks,
Vijaya

I have an extensive aperture library on my computer's hard drive and I want to break it up into separate smaller libraries on external hard drives. How do I take projects from one library and add them to another one?

I have an extensive aperture library on my computer's hard drive and I want to break it up into separate smaller libraries on external hard drives. How do I take projects from one library and add them to another one?

Coastal,
Frank gave you the exact answer to your question.
However, I would like to ask if you are indeed asking the right question. Do you really want different libraries? The implications are that you have to "switch" libraries to see what's in the others, and so that your searches don't work across all of your pictures? If so, then you asked the right question. If not, you may be more interested in relocating your masters to multiple hard drives so your library gets smaller, instead of breaking up the library.
nathan

How to delete a project in Oracle apps R12

Hi
OS RHEL 5.5
Database 11.1.0.7
Applications R12
Initially I have created a project in oracle apps from wrong template and modified the template then created a project with the same modified template.
Now the wrong project needs to be deleted so how to delete the project which had been created from wrong template in oracle apps R12 and integrated project with MSP.
Both the wrong and correct projects are referring to the same template.
Please help me to delete the project as it is done in production database.
Rgrd
Edited by: 955685 on Feb 4, 2013 8:10 AM

955685 wrote:
Hi
OS RHEL 5.5
Database 11.1.0.7
Applications R12
Initially I have created a project in oracle apps from wrong template and modified the template then created a project with the same modified template.
Now the wrong project needs to be deleted so how to delete the project which had been created from wrong template in oracle apps R12 and integrated project with MSP.
Both the wrong and correct projects are referring to the same template.
Please help me to delete the project as it is done in production database.
Rgrd
Edited by: 955685 on Feb 4, 2013 8:10 AMPlease see these docs/links.
Delete Project Functionality not Working [ID 1060648.1]
PRC: Delete Project Performance Reporting Data Completes With Error ORA-12838 ORA-6512 [ID 748674.1]
How Can the PA Period Type Be Changed if It Has Been Entered Incorrectly? [ID 881424.1]
PAXPREPR Unable To Delete Project [ID 874642.1]
http://www.oracle.com/pls/ebs121/search?word=Delete+AND+Project&format=ranked&remark=quick_search
Thanks,
Hussein

How to delete the project version RELEASED.

System is below:
" Project 1522DJ110001 version RELEASED already exists
Message no. CJ016
Diagnosis
A Version RELEASED already exists for project 1522DJ110001.
System Response
Processing stopped. "
but in the system , there are no "Project 1522DJ110001". so the user can't create the project "1522DJ110001".
how to delete the Project 1522DJ110001 version RELEASED ?
Please explain me all the steps to be required.
Thanks in advance!

Hi Harish,
When I select Delete Project Version from Extras menu in CN41, its asking session number and version.
In session number no serch help is avialble. I am keeping it blank and seleting RELEASED in version.
After pressing enter I am getting an error Project Version RELEASED cannot be deleted??
Let me the exact steps to deleted the Project Version.
Thanks and Regards,
Atul R. Rajmane

How to split all the fields of output ls-l from an internal table

Hi all,
Using ls-l command i have brought the file attributes of a file like its read and write permissions,creation date ,path etc in a internal table.
Now how to split all these fields from the internal table or what should be the splitting criteria.
The field contents of internal table are like this:
-rw-rw---- 1 devadm sapsys 18360 apr 29......so on
I want to split this into different fields.
Kindly suggest.
Thank You.

Hi,
I think the delimiter will be space. For date alone (Apr 29) you need to concatenate after the string has been split.
Thanks and regards,
S. Chandramouli

How to split a project

Similar Messages

Maybe you are looking for