How to split left and right sound signal from SI READ Stereo?

How to split left and right sound signal from SI READ Stereo?
I want to display the left and right sound signal in two graph separately,what shall I do?
That is how to split 2D arry to two 1D arry?

Hello,
Here's another trick...although the "Index Array" suggestion will work, you should investigate using the "Delete from Array" function...you can tell it to delete one of the columns (or rows), leaving one column (or row)...the function will output both the resulting array AND the deleted array, which happens to be the other row/column...this method might not be as intuitive, but it only makes one copy of data in memory, while the Index Array method makes two copies.
I hope this suggestion helps. I only found out about this trick with "Delete from Array" the other day.
Have a great weekend!
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Similar Messages

How to group Left and Right audio tracks from a .OMF file?

Hi, i'm editing the sound of my short film, i've sent a .OMF to audition from premiere, but the left and right tracks are seperate tracks in the multitrack session, how would i group them so whatever i do to one channel, will be done to the other

This is because the OMF specification requires mono audio files
It really depends on what you are trying to do with the two tracks as to the best answer as far as 'grouping'
You could select all the clips on both tracks and right mouse click and select 'group'
You could send both tracks to a bus
You could export the two tracks to a stereo file and bring that back into the session
Lots more things I'm sure but a little more detail as to what you are trying to do would help

? how to add page numbers in pages 5.2, starting with 2. Pages '09 had an option to not show folio on page one. Also any how to do left and right folios for a Tabloid? Many trhanks

? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .

Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl

Cannot distinguish between left and right sounds IN EARPHONES. Please help!!

when i connect my earphone, i cannot distinguish between left and right sounds (which gives a plesant effect); both left and right sounds are same. Earlier it use to work fine. I realised about this problem when an app-3D audio illusion was was not giving proper sounds, and my ipod songs were also sounding dull. i hav removed that app, but still my ipod songs sound monotonous. I have tried using different headphones, but problem still persists. I am not sure wheather this is a hardware or software issue..PLEASE HELP!!

You're welcome. And thanks for marking question as solved.
Happy listening
Stedman

How to separate left and right channel in audiotracks

I would like to adjust audio tracks left and right channels separetly from each other. Now the volume levels are linked together. Is there a way to separate them?
Other question is ; for some reason the pan slider in viewer does not seem to have left/right affect but kind of mono/stereo affect. It is supposed to be so, or do I have some audio preference button in wrong position?
Message was edited by: TRST

To answer to myself: Go to the User Manual and read the Chapter Audio Editing Basics from page 425.
Or click the clip in timeline which you want to change, and go to Modify---> uncheck the stereo pair option in there.

Splitting left and right channel

I need to split the left and right channels of the audio output. I have a stereo cable from my new HP Pavilion 15 Notebook PC, running Windows 7 Home Premium, to an amp that takes the channels separately. The amp allows me to control the volume for the channels separately. This does not work on my new laptop. I get both channels on both ends of the cable.
I have an older HP G60 Notebook PC, running Windows 7 Home Premium, and the same cable and same amp does just what I need.
Is there a way to configure the audio out port in my new PC so it works like the audio out port on my old PC?
Vomocid

floorjam wrote:
Hello - what is the best way to swap left and right channels on a master?
If I use the direction mixer and reverse the phase is that effectively what's
happening?
No, not at all. Reversing the phase will not swap anything, it'll just reverse the phase.
Use the Gain plugins' Swap button for that. The Gain plugin is under {inserts}>Utility>Gain

Carousel Appearance. How to narrow Left and right margins (ADF 11.1.2)

Hello,
I need help to adjust the appearance of a carousel component.
As you can see in the picture i need more space for the current page of carousel (need to enlarge the current page) and i want to narrow the space marked with a red line (left and right).
Property settings available do not help.
Can anyone have an idea?
[http://i52.tinypic.com/28arlma.png]

Hi,
did you try skinning ?
http://download.oracle.com/docs/cd/E16162_01/web.1112/e16181/af_skin.htm#BAJFEFCJ
The skin tag documentation is here
http://download.oracle.com/docs/cd/E16162_01/apirefs.1112/e17497/toc.htm
Just have a look for what is available for af:carousel (and note the new skin editor)
Frank

How to separate left and right audio channels?

I've imported some AVCHD footage that had audio recorded separately to each channel, left and right. When I put a clip in my timeline, I can separate the audio tracks, but I can't edit them individually. When I bring down the level to 0db on one track and play the clip, the audio meter still shows equal levels on both left and right channels. Any advice?
Second question - I transcoded some AVCHD footage to MP4 and can't figure out if the audio tracks remain separte after the transcoding. I used Free MTS M2TS Converter to do the transcoding. While I can choose 'dual mono" for an AVCHD clip, I do not have that same option for the MP4 clip. It offers me "6 mono" but not dual mono. Any advice?
My concern is that when I provide my clients with raw MP4 footage with right and left audio recorded separately, that they'll be able to edit each track individually.
Thanks!

Thanks Tom. I recorded 2-channel audio, not 5.1 surround. Six mono was only an option on the MP4 clip. I did change the channel configuration from stereo to dual mono on the AVCHD clip, but I still wasn't able to edit the audio independently. Even when I mute one track, the audio meter still shows equal left and right levels.

How to send left and right of stereo sources to different targets?

Hi
Suppose I have an instrument track or audio track in stereo, and I want to send the left side of it to one bus and the right side to another bus, is there an easy way of doing this without creating two duplicate tracks (and panning one hard left and the other hard right)?
Similarly, suppose I have routed a track into a bus which contains an effect, a phaser for example, which is in stereo, and I want to put a delay on just the right and side but not on the other. Is there an easy way of doing this (without for example routing the output of the phaser bus to two separate busses and panning them hard left and right and then routing the right bus to another bus which contains the delay)?
Thanks if anybody has any suggestions, I'm playing around with this sort of stuff at the moment but its gettings too spaghetti. Am I being daft and the ability is there I just haven't found it in the manual?

Well, I did just what you´re asking about the other day. In order to process a stereomix with MS technique, I needed to send the left channel to bus 1, the right to bus 2. So I turned off Universal Track Mode. This enabled me to route the output to Bus 1-2 instead of Output 1-2.
I believe this should work for you, too. It´s a bit fiddly, and you mustn´t forget to turn Universal Track Mode back on if you continue with another project. Otherwise things might get very complicated indeed.
/j
Message was edited by: juhani h.

How do i isolate Left and right sound on X-Fi ca

Hey all,
Wonder if anyone knows how to turn off left channel sound and vice versa. I play alot of Karaoke VCDs and they usually have left channel as music and right channel as music with vocal but i can't find the option to turn off either left or right.
I usually do this by using the L/R slider in wondows mixer but when i do this with the X-Fi card the left channel (music only) seems to be a mix of L&R resulting in hearing the vocal. Strangly this doesn't happen when playing in Power DVD the slider method works fine, but with apps like real player, media player, media source etc. the problem presists.
Any Ideas? Appriciate any help ^.^
(Running X-Fi Platinum with Logitech Z5500 5.)

Jason,
I've tried turning off cmss but it still doesn't do the job. I find it strange that there is no problem with Power DVD but with other applications. Does this mean it might be a application problem?
Mmm...running out of ideas....

How to add left and right margins in Topic?

Hi
I am using RH10, as part of TCS4. I am creating screen layouts by just modifying the existing ones.
I noticed that there is no margin/ space between the topic border and the topic content in it. When I searched for that in mobile.css, I did not find any relevant reference. When I did a Inspect Element on Firefox, it pointed to default.css which I don't find in my Project Setup pod.
How can I modify it? Here is the screenshot of the issue I am referring to:
Please advise.
Sreekanth

Or right click the css, click Edit With > HTML Editor and apply a margin left and margin right to the Body tag. That will affect all the styles in one go.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to move Left and Right audio components

At a performance, there was a delay between what my camera recorded from a soundboard on the left track and what it recorded from a shotgun mic on the right track.
I want to move each track (Right and Left) independent of each other using FCP 10.1.2
So far I have successfully changed the audio from Stereo to Dual Mono and I have Expanded Audio Components.
I am not able to move either track. No matter wether position or arrow is selected I looks like a range selection over the track and it will not move.
Any help would be greatly apreciated!

Yes, that screen shot of your Cam5 video and its right and left audio being staggered is exactly what Im trying to do. Im sorry I have not been able to describe this better.
It was the “Detach Audio” option that was giving the messy appearance.
This time I only made two adjustments done in the Timeline.
I followed these two steps:
1. I select the clip on the Timeline and chose “Expand audio components”
2. Then selected the video clip again and chose “Dual Mono”
Here is a screen shot of what it looks like now:
Just like before, I can manipulate the audio levels but when I attempt to drag either audio a box is drawn over the clip that looks like the “range select” tool. This happens when I have either arrow or position is selected. Nothing can be moved. I tried these two basic steps on my other computer using an older version of FCPX and get the same result.
The work around that I described above allowed me to finish this project by my deadline but this is still something I would like to learn since it’s a pretty basic function of FCP that I need to be able to do a lot.
Thank you Tom for your continued help and guidance.

How to remap left-and-right Command key separately?

This was asked earlier with no resolution, but maybe things changed in last 1.5 years -- is there a way to remap Right and Left control to different functions? I'd like Right Command key to function as Control and leave the left one as Command

I think the answer is the same as last year. Don't know of any way to do that.
Captfred

Left and right button combo to emulate middle button?

Hi,
Anyone knows how to configure left and right button to work together to emulate middle button?, ie when pressing down both left and right button, it functions as middle button?
Simon

Hi and welcome to the forum sgao,
It's possible with a workaround, see this solution:- http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T510-both-touchpad-buttons-as-middle-click/...
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Left and Right Functions in 11g

How to Get Left or Right n characters from any string.. Pls help

sabbA risaN wrote:
How to Get Left or Right n characters from any string.. Pls helpUse SUBSTR function:
SELECT SUBSTR('ABCDEF',1,3) LEFT_3,
SUBSTR('ABCDEF',-3) RIGHT_3
FROM DUAL
LEF RIG
ABC DEF
SQL> SY.

How to split left and right sound signal from SI READ Stereo?

Similar Messages

Maybe you are looking for