How to split stereo to 5.1 speakers (connect MP3)

I need adaptor connect mp3 to 5.1 speakers.
I want that it will be so:
stereo signal on front and rear speakers and mono of the same signal on center,sub.

How to split it duh? huh!!
let me teach you...
go to Adobe Premiere 2.0, and then drag an audio clip you desire and put it in the time frame, then select the Audio transition, and selected 5. sound. Drag the transition into the audio and save it now!! LOl...>ROFL....LMAO!!!
is this helping you?
or, try the CMSS-3D setting to Stereo-Surround 50% !

Similar Messages

How to split stereo track into 2 mono

How to split a stereo audio track into two seperate mono tracks (Left, Right).
(Have searched the manual..)
Bonqui

Also, where you select mono or stereo for a track below the level meter you can click + hold and select L or R. Instead of bouncing, you can convert the files, for me this gives fewer room for error. Also disabling UTM works in some cases, but this is not ideal for every session.
J

How to SPLIT ONE STEREO TRACK'S L & R CHANNELS INTO TWO MONO CHANNELS

Does anyone know if this is possible: How to SPLIT ONE STEREO TRACK'S L & R CHANNELS INTO TWO MONO CHANNELS? There's got to be a way, but I just can't find out how.
I recorded a podcast -- me and a guest, with each mic going to its own mono channel. When I opened it in Audition it mixed them into one stereo channel.
Thanks in advance for any help.
Best,
Shawn

You're a big help! Thanks very much. Simple yet I must be going blind because I didn't see that in the menu.
Take care and THANKS AGAIN.
Shawn

How to split left and right sound signal from SI READ Stereo?

How to split left and right sound signal from SI READ Stereo?
I want to display the left and right sound signal in two graph separately,what shall I do?
That is how to split 2D arry to two 1D arry?

Hello,
Here's another trick...although the "Index Array" suggestion will work, you should investigate using the "Delete from Array" function...you can tell it to delete one of the columns (or rows), leaving one column (or row)...the function will output both the resulting array AND the deleted array, which happens to be the other row/column...this method might not be as intuitive, but it only makes one copy of data in memory, while the Index Array method makes two copies.
I hope this suggestion helps. I only found out about this trick with "Delete from Array" the other day.
Have a great weekend!
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

How do I bounce two mono split stereo files to one mp3?

Might sound like a stupid question, but I have several problems:
I bounced a waveburner-mix of my favorite songs as a split stereo file and inserted the two files in two logic mono audio tracks.
First problem: Do I have to pan the left audio-track left and the right to the right or do I keep them centered?
Second problem: The two tracks are louder than the original track. (no matter, if they are panned or centered. Shouldn´t the original have the same volume at my output-channel?
Third problem: Is it possible to bounce more than 2 GB with Logic 8? The mix is very long and when I want to bounce it, logic tells me that it is too big. Can I bounce larger files with logic 9 under OS 10.6?

Felix Bartelt wrote:
Last question remaining: Can I bounce larger files under Logic 9 and OS 10.7. or does L9 also have the 2 GB restriction?
No and no. The file size restriction is not Logics' restriction, it is a restriction of the file type itself. To be able to bounce longer and/or bigger files, use .caf.
From the manual:
+AIFF: The AIFF file format cannot handle audio file recordings larger than 2 GB:+
++For 16-bit, 44.1 kHz stereo files, this equals a recording time of about 3 hours and 15 minutes.+
+For 24-bit, 96 kHz, 5.1 surround files, this equals a recording time of about 20 minutes.+
+WAVE (BWF): The WAVE file format cannot handle audio file recordings larger than 4 GB:+
+For 16-bit, 44.1 kHz stereo files, this equals a recording time of about 6 hours and 30 minutes.+
+For 24-bit, 96 kHz, 5.1 surround files, this equals a recording time of about 40 minutes.+
+CAF: If the size of your recording exceeds the above limits, choose the CAF (Apple Core Audio Format) file format, which can handle the following recording times:+
+About 13 hours and 30 minutes at 44.1 kHz+
+About 6 hours at 96 kHz+
+About 3 hours at 192 kHz+
+The bit depth and channel format—mono, stereo, or surround— *do not affect* the maximum recording size of CAF files.+

How to make stereo sound play also from rear speakers on X-

X-Fi is excellent card. Just one question though (CMSS 3D disabled, 5. speakers set correctly): when I play stereo file (like MP3) the sound comes only from front speakers. Well it's logical of course but my old Audigy duplicated the sound also to rear speakers (the center speaker wasn't used) - so is it posible also on X-Fi to play stereo music from rear speakers too without enabling CMSS?

Actually I just found out that this CMSS3D is VERY good way to expand stereo to 5. (although it's not what I originally meant) - so no need to reply me but I'll welcome any opinions anyway.

Splitting Stereo Files

How do you split stereo files in Logic? Anyone? Whenever I import a stereo file, it comes as one interleaved track. I change the track to accept stereo files (at the bottom of the fader in the lower left hand corner) and even when I double-click on the file, I see two channels, yet I can't alter them. Is there a way to fix this? Please help. Thanks.
Josh
G4 Mac OS X (10.3.9)

How do you split stereo files in Logic?
I see two channels, yet I can't alter them. Is there a way to fix this?
Is your question: "How do I split a stereo interleaved file into two mono files with Logic?" or is your question "How do I use split stereo (dual-mono) files in Logic?"
For the first, there are options in the audio window to convert and split files.
If it's the second, then you can turn "Universal Track mode" OFF in your audio preferences - now all channels are mono and stereo files are controlled by two mono faders.
However, working in this mode is kinda ugly and has some disadvantages, but if you prefer it, fair enough.
Finally, if you just want to be able to process left and right channels of a stereo file independently, you can always route to a couple of busses and pan left or right to get the two halves, or duplicate your stereo track and select "Left channel only" and "Right channel only" by click holding on the O-OO stereo channel selector.
Does that help?

Splitting stereo tracks to mono for separate editing?

Does anyone know of a way to split a stereo track into two mono tracks inside of Logic Pro 8?
I'll explain my problem, I have a track made from samples of a song. In the track that I recorded, there is one particular sound that I can't get rid of no matter how hard I try. I recorded the passage with the ESX24 in stereo and I noticed that the noise is only on the left track. My first solution was to pan the track all the way right, create a duplicate of that and pan it hard left. Unfortunately, it loses a lot of clarity and texture when I use this method..
Looking on the forums, all I could find was instructions to bounce the tracks to split stereo, but I need them to form separate tracks within Logic so I can apply a LowPass filter to the problematic left track, then mix them back together as one stereo track later....
Any suggestions?

You guys are talking about different things. The OP says he's using an exs24 instrument with a sample that has a noise on one side of the stereo field of a SAMPLE not an audio region recorded into logic. Samples used by the EXS24 are not added to the audio bin, only into the EXS24's RAM. You could pan the instrument track to the side without the noise, and then output the result to a bus track that is set to MONO. That will pan your one sided sampler back to center. You can also bring the sample into logic (using the browser) and then split it as eriksimon suggested, and then create a new EXS24 instrument using only the good side of the sample.

"disconnect split stereo files" not working

I'm trying to split a stereo audio file into two mono files (manual page 855):
Disconnecting Split Stereo Files
Both sides of a split stereo file are normally edited together. On
occasion, however, you may need to edit one side individually.
To disconnect a split stereo file:
1 Select (either side of) the split stereo file in the Audio Bin.
2 Choose Edit > Disconnect Selected Split Stereo File.
You can now edit both sides of the recording as individual mono files. This function will
only disconnect one split stereo file at a time.
When I select the stereo file in the Audio Bin and choose "disconnect selected split stereo file", the following pops up:
"please select exactly the split stereo audio file you want to disconnect"
I thought I was?
I see the two interconnected circles signifying a stereo file. I choose that file and follow the instructions above but I cannot split the file.

I think I misunderstood. You don't have a split stereo file, you want to split an interleaved file. I see no split stereo files (suffix .L and .R) in your screenshot, so...
From the local Audio Bin menu, choose *Copy/Convert File(s)*
In the conversion dialog, set *Stereo Conversion* to *Interleaved to Split*. Check the *Add to Audio Bin* option. Now two files, suffixed .L and .R, will appear in the audio bin. These are split stereo files.
regards, Erik.
Oh, and this is how to post screenshots:
The pic needs to be online
Once you've uploaded it, go to where it is uploaded, right- or ctrl-click on the picture and choose *Copy Link Location*. Go to your post and add the following syntax to it:
{IMG src="pastecopiedImageLocation"}
You must substitute < and > for the {}braces shown above, and +the quotation marks are essential+.
Use the Preview tab (right above the five format buttons) when writing a post to check if the screenshot shows up in your post, before actually posting it.
(© iSchwartz)

How to turn stereo into 5.1 suround sound

Hello i have cs 5.5 i would like to take old vhs or 8mm video tapes and put them on dvd in 5.1 surround sound can anyone tell me how to spit stereo into the left center tight live left surround right surround every time i try my receiver kicks into Dolby d but the sound only comes threw the front left and tight can anyone help me and if so a step by step would be a great help.

This is gonna get complicated..so I'm gonna put pics in first and then explain them cause I dont remember what order I made the pics in...plus I'm an idiot so my explanation will be weird.. plus I never do this stuff can im using cs3...
basically this is what I did. created new project and in preferences chose 5.1 surround...chose a few mono track, a couple stereo tracks, a few submix tracks and some 5.1 tracks..something for everyone..
Then I put a real stereo wav file into a stereo track. The left and right sides were recorded so that it is REALLY stereo and very obvious ( old beatle song ). You can tell by waveform how different left and right side of stereo wav file is...
then i opened soundforge and copied ONLY the left channel of the stereo wav file and saved it as a MONO file...so I can demonstrate THAT part..
using stereo wav and using 5.1 control you can put that wav into left front, right front, etc..but it puts it ALL there unless you play with stuff a LOT in your controls...to me its easier to make a mono wav file of the left side and just use that. I would have made a right side only wav ALSO if I was to continue with this project ...
above image is where you choose what to add to project
some controls ..you can assign to submix and you can use as a master..etc
above image is real stereo wav in stereo track..like yours...
above is making a mono track wav out of the stereo left side of original stereo wav..
above.. now if I put my mono wav into that track and move my dot to front left... I hear only the left part of the original stereo wav in the left front speaker... in essence I can put mono track of 'right' side into the right front speaker using another mono track and moving the dot.. I can also now put that stuff into the other speakers as desired..and mix the volumes etc in the sound controls ... know what I mean..you can do other stuff with the stereo only wav if you cant make mono tracks for more control...and play with the submix stuff etc.. this should get you started ??
ps.. I also made a stereo wav of the left side ONLY just in case you wanted to see what that looks like in a stereo track..but its only left side of original wav..
good luck !

Logic 8 plays split stereo files random

When I play a split stereo file Logic 8 plays those files random, they aren't synced together. Sometimes some audio files aren't playing at all. Stop and play solves in most cases this problem. I have this on several harddisks.
It seems like a defragmented harddisk. I erased and re-formatted the harddisk already, no results. I use DAE and Core Audio together.
Any suggestions?
Wim

try to use only built-in driver...
which are the interfaces that you have for not DAE tracks?
Is this issue only on the DAE tracks?
This not a Logic problem .. or better I never got this problem!
How many DAE tracks are in your DAE preference settings...
are you sure that you have the DAE DSPs power that can play all tracks that you have selected?
fermusic

How do i use my apple express speakers as the sound from apple tv?

how do i use my apple express speakers as the sound from apple tv?

Welcome to the Apple Community.
You can't with the Apple TV 2 or 3, with the Apple TV 1, you can choose them from the Airtunes option in the settings menu.

How do I use my airport express speakers with Spotify?

Does anyone know how to use Spotify with speakers connected to an airport express. I do not want to but the AirFoil app. Surely, the is another way.

Welcome to the discussion area, mareithree!
You'll need the 802.11"n" version of the AirPort Express to be able to "Enable ethernet clients" and connect the DVD player. Unfortunately, your older version of the Express does not allow this type of feature.

How to split a line item to 2 line item.

Hi all !
I have a request, help me please !
In system I have a invoice with 1 line item value 1000 USD.
Customer payment 600$. a incoming payment with value 600$ will post to system.
I want incoming payment and invoice will auto clear 600$ but system can't auto clearing because value is not Identical.
I want line item of invoice will split to 2 line item. Line item 1 value 600$ and line item 2 value 400$.
Line item 1 of invoice will auto clear with incoming payment and system will exist a invoice with 1 line item value 400$.
How to split a line item to 2 line item ? Have FM for split a line item to 2 line item in SAP ?
If you have other solution for this request, help me please !
Thanks !

Hi,
Have a look at Split line item - Sales Order
Regards

How can I convert my music, and CDs to MP3, for use in my vehicle's AM/FM/ Stereo? I have a 16 GB SDHC Card, that I would like to load up with some of my music.

How can I convert my music, and CDs to MP3, for use in my vehicle's AM/FM/ Stereo? I have a 16 GB SDHC Card, that I would like to load up with some of my music.
Thanks for any help you can furnish.
Ed

Well, this question really belongs in the iTunes forum, which is where you will get fast answers.
Just go to iTunes Preferences. Click on the General icon. Set When you insert a CD to Ask to Import CD. Click on Import Settings. Set Import to MP3 decoder. Make sure you're using Good Quality.
This should deal with your CD's.
With your current music, as long as it does not have DRM restrictions (older iTunes Music did), select the song, right click on the song (or group of songs), pull down to Create MP3 version.

How to split stereo to 5.1 speakers (connect MP3)

Similar Messages

Maybe you are looking for