How to split this string(char1)char2(char3)char4 into (char1)char2 , .. etc

how to split this string (char1)char2(char3)char4 into (char1)char2 , (char3)char4?
String[] result = "(char1)char2(char3)char4".split("\\(");I want :
result[0] = "(char1)char2" and
result[0] = "(char3)char4"
acutally char1,char2,char3, char4 ... is in the form of the below.
(any charactors except round brace)any charactors except round brace(any charactors except round brace)any charactors except round brace
I prefer String.split and Pattern.compile().split.
Edited by: iamjhkang on Feb 5, 2009 3:37 PM
Edited by: iamjhkang on Feb 5, 2009 3:41 PM

iamjhkang wrote:
especially on
?= and ?<
Thanks.The following:
(?=...) // positive look ahead
(?!...) // negative look ahead
(?<=...) // positive look behind
(?<!...) // negative look behindare all "look-arounds". See: [http://www.regular-expressions.info/lookaround.html]

Similar Messages

How to split this string into 4 sections to a max 35 characters

Hello,
Does anyone have an idea how I can acheive this please.
I have this string
Expense_Inv_8- ExpenseInv_7- Exp001- Expense_Inv_6- Expense_Inv_5- Expense_Inv_4- Expense_Inv_3- Expense_Inv_2- Expense_inv1
and I need to display them in sections seperated by ';' as explained below
Section 1 Section 2 Section 3 Section 4
Expense_Inv_8- ExpenseInv_7- Exp001;Expense_Inv_6- Expense_Inv_5;Expense_Inv_4- Expense_Inv_3;Expense_Inv_2;
need to split this string into 4 sections seperated by ';' and each section should be of no more than 35 characters, if null should end ;;;
Section 1, 35 Character ended by;
Section 2, broken off after Expense_Inv_5 because Expense_Inv_4 will take it over 35 chracters)
Section 3, should only take Expense_Inv_4- Expense_Inv_3, because adding Expense_Inv_2 will take it over 35
characters, each record in the string is seperated by '-'
Section 4, dispays the reminder of the string
regards
Ade

Hi,
Welcome to the forum!
Whenever you ask a question, it helps if you post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) and the results you want from that data.
I think I understand the problemk well enough to attempt a solution, but if the query below isn't right, please post that information.
WITH     cntr     AS
     SELECT     LEVEL     AS n
     FROM     dual
     CONNECT BY     LEVEL     <= ( SELECT MAX (LENGTH (txt))
                         FROM    table_x
,     got_best_path     AS
     SELECT     id
     ,     txt
     ,     MAX ( SYS_CONNECT_BY_PATH ( TO_CHAR (c.n, '99')
                  ) AS best_path
     FROM     cntr     c
     JOIN     table_x     x     ON     c.n <= LENGTH (x.txt)
     START WITH     c.n     = 1
     CONNECT BY     c.n - PRIOR c.n     BETWEEN 1
                             AND      :section_length
          AND     x.id          = PRIOR     x.id
          AND     SUBSTR ( x.txt
                             , c.n
                             , 1
                             )     = '-'
     AND     LEVEL          <= :section_cnt
     GROUP BY id
     ,            txt
,     got_pos     AS
     SELECT     id
     ,     REPLACE ( txt
               ) || ';'                         AS txt
     ,     best_path
     ,     TO_NUMBER (REGEXP_SUBSTR (best_path, '[0-9]+', 1, 2))     AS pos_2
     ,     TO_NUMBER (REGEXP_SUBSTR (best_path, '[0-9]+', 1, 3))     AS pos_3
     ,     TO_NUMBER (REGEXP_SUBSTR (best_path, '[0-9]+', 1, 4))     AS pos_4
     FROM     got_best_path
SELECT id
,     SUBSTR (txt,     1    , NVL ( pos_2         , :section_length))     AS section_1
,     SUBSTR (txt, pos_2 + 1, NVL ((pos_3 - pos_2), :section_length))     AS section_2
,     SUBSTR (txt, pos_3 + 1, NVL ((pos_4 - pos_3), :section_length))     AS section_3
,     SUBSTR (txt, pos_4 + 1,                        :section_length )     AS section_4
FROM     got_pos
;As written, this requires SQL*Plus 9 (or higher). You can have multiple versions or SQL*Plus on the same client, if you really need to keep the older version.
:section_length is the maximum length of each section (35, as you stated the problem).
:section_cnt is the number of sections. In the query above, this is 4. If you change it, you not only have to change the bind variable, but you have to change the hard-coded SELECT clauses of the main query and the last sub-query (that is, got_pos).
MODEL or PL/SQL would probably be better ways to solve this problem.

How to split the string by datetime in sql

Hi,
How to split the string by datetime in sql, I've a table with comments column stores comments by datetime, while selecting I want to split and show as in rows by each jobref.
can anyone help me in this please.
Thanks,

declare @callcentre table (comments varchar(max),lbiref varchar(200))
insert into @callcentre
select '(28/10/2014 14:56:14) xyz ..... call logged (28/10/2014 14:56:58) xyz ..... call updated (28/10/2014 14:57:41)xyz ..... call updated','Vi2910201'
insert into @callcentre
select '(29/10/2014 14:56:14) xyz ..... call logged (29/10/2014 14:56:58) xyz ..... call updated (29/10/2014 14:57:41)xyz ..... call updated','Vi2910202'
insert into @callcentre
select '(30/10/2014 14:56:14) xyz ..... call logged (30/10/2014 14:56:58) xyz ..... call updated
output:
1) 28/10/2014 14:56:14, (28/10/2014 14:56:14) xyz ..... call logged ,'Vi2910201'
2) 28/10/2014 14:56:58 ,(28/10/2014 14:56:58) xyz ..... call updated ,'Vi2910201'
3) 28/10/2014 14:57:41, (28/10/2014 14:57:41)xyz ..... call updated,'Vi2910201'
4) 28/10/2014 14:56:14, (28/10/2014 14:56:14) xyz ..... call logged ,'Vi2910202'
5) 28/10/2014 14:56:58 ,(28/10/2014 14:56:58) xyz ..... call updated ,'Vi2910202'
6) 28/10/2014 14:57:41, (28/10/2014 14:57:41)xyz ..... call updated,'Vi2910202'
7) 28/10/2014 14:56:14, (28/10/2014 14:56:14) xyz ..... call logged ,'Vi2910203'
8) 28/10/2014 14:56:58 ,(28/10/2014 14:56:58) xyz ..... call updated ,'Vi2910203'
Thanks,
See this illustration
declare @callcentre table (comments varchar(max),lbiref varchar(200))
insert into @callcentre
select '(28/10/2014 14:56:14) xyz ..... call logged (28/10/2014 14:56:58) xyz ..... call updated (28/10/2014 14:57:41)xyz ..... call updated','Vi2910201'
insert into @callcentre
select '(29/10/2014 14:56:14) xyz ..... call logged (29/10/2014 14:56:58) xyz ..... call updated (29/10/2014 14:57:41)xyz ..... call updated','Vi2910202'
insert into @callcentre
select '(30/10/2014 14:56:14) xyz ..... call logged (30/10/2014 14:56:58) xyz ..... call updated','Vi2910203'
SELECT LEFT(p.u.value('.[1]','varchar(max)'),CHARINDEX(')',p.u.value('.[1]','varchar(max)'))-1) AS [Date],
'(' + p.u.value('.[1]','varchar(max)') AS comments,
lbiref
FROM
SELECT lbiref,CAST('<Root>' + STUFF(REPLACE(comments,'(','</Data><Data>'),1,7,'') + '</Data></Root>' AS XML) AS x
FROM @callcentre c
)t
CROSS APPLY x.nodes('/Root/Data')p(u)
and the output
Date comments lbiref
28/10/2014 14:56:14 (28/10/2014 14:56:14) xyz ..... call logged Vi2910201
28/10/2014 14:56:58 (28/10/2014 14:56:58) xyz ..... call updated Vi2910201
28/10/2014 14:57:41 (28/10/2014 14:57:41)xyz ..... call updated Vi2910201
29/10/2014 14:56:14 (29/10/2014 14:56:14) xyz ..... call logged Vi2910202
29/10/2014 14:56:58 (29/10/2014 14:56:58) xyz ..... call updated Vi2910202
29/10/2014 14:57:41 (29/10/2014 14:57:41)xyz ..... call updated Vi2910202
30/10/2014 14:56:14 (30/10/2014 14:56:14) xyz ..... call logged Vi2910203
30/10/2014 14:56:58 (30/10/2014 14:56:58) xyz ..... call updated Vi2910203
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to split a string with linefeed character ( LF ) as a delimiter in VB6?

Hi. I am writing a small program in VB 6.0.
I have a string named Data and it contains few characters along with <LF> in it. ( <LF> is a new line/line feed character).
I want to split this string with <LF> as delimiter and store the tokens in an array. I tried with split function and its giving me type mismatch error. Can anyone tell me how to do it?
I am giving the pseudo-code below.
Dim Data as string
Data = "hello, how are you<LS>good morning guys <LS> hi"
Dim strarray() as stringMsgbox(Data)
strarray = split(Data, "<LS>")
When i see the Data in message box before split function, it shows up in different lines like this:
hello, how are you
good morning guys
hi
I want the final array strarray to be like this: strarray(0) = "hello, how are you"
strarray(1) = "good morning guys "
strarray(2) = " hi"
The spaces can be as it is. Just i need the string to be delimited wherever <LS> is there.
Please help me as soon as possible. Though it is small one, i am stuck here.
Thanks in advance,
Satya.

Hello,
This forum is for VB.NET, please check the following resources
http://www.vbforums.com/forumdisplay.php?1-Visual-Basic-6-and-Earlier
http://social.msdn.microsoft.com/Forums/vstudio/en-US/6a0719fe-14af-47f7-9f51-a8ea2b9c8d6b/where-to-post-your-vb-6-questions?forum=vbgeneral
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

How to split a string using sql

Hi All,
I've to write a query where I need to split a string, how this can be done? So let's say a column has value as 1,2,3,4,5 and I want to split this string and output it as:
1
2
3
4
5
Please advise.

Lots of articles:
Snap this user defined function too:
CREATE FUNCTION [dbo].[ufn_SplitString_Separator](@InputStr VARCHAR(MAX), @Separator VARCHAR(1))
RETURNS @tmpTable TABLE (OutputStr VARCHAR(MAX))
AS BEGIN
DECLARE @TmpPOS integer
SET @TmpPOS = CHARINDEX(@Separator,@InputStr)
WHILE @TmpPos > 0 BEGIN
IF @TmpPos > 0 BEGIN
INSERT INTO @tmpTable VALUES (LTRIM(RTRIM(SUBSTRING(@InputStr,1,@TmpPos-1))))
SET @InputStr = SUBSTRING(@InputStr, @TmpPOS + 1, LEN(@InputStr) - @TmpPos)
SET @TmpPOS = CHARINDEX(@Separator,@InputStr)
END ELSE BEGIN
INSERT INTO @tmpTable VALUES (LTRIM(RTRIM(@InputStr)))
SET @TmpPos = 0
END
END
IF LEN(@InputStr) > 0 BEGIN
INSERT INTO @tmpTable VALUES (LTRIM(RTRIM(@InputStr)))
END
RETURN
END
GO
And you can use like this:
SELECT * FROM DBO.[ufn_SplitString_Separator]('1,2,3,4,5',',')
"If there's nothing wrong with me, maybe there's something wrong with the universe!"

How to split a string with a space in between?

Hi ABAP Guru's,
Can you please help me out? How can I split a string into two which has a space in between?
For example: lets suppose the string is 'LA CA USA'. How can I split this string? I have to dynamically determine the number of characters before the space therefore I cannot use number constant such as 2 or 3.
With best regards,
Ketan

Hi
Try like this
DATA : opbal TYPE p DECIMALS 2 VALUE 0.
    SELECT * FROM zs_mkpf_mseg
                    into corresponding fields of table it_opbal
                    WHERE werks = itmat-werks
                    AND matnr = itmat-matnr
                    AND budat = s_budat-low.
* sort it_opbal by budat.
loop at it_opbal.
read table it_opbal.
      IF it_opbal-shkzg = 'S'.
        opbal = opbal + it_opbal-menge.
      ELSEIF it_opbal-shkzg = 'H'.
        opbal = opbal + it_opbal-menge * -1.
      ENDIF.
endloop.
    append opbal TO itab-opbal.
ENDFORM.                    " opbal_data
you can also use thi s
DATA: NAMES(30)    TYPE C VALUE 'Charly, John , Peter',
      NAMES2       TYPE STRING,
      ONE(10)      TYPE C,
      TWO(10)      TYPE C,
      THREE        TYPE STRING,
      FOUR(4)      TYPE C VALUE 'FOUR',
      DELIMITER(2) VALUE ','.
SPLIT NAMES AT DELIMITER INTO ONE TWO.
*     ONE contains 'Charly' and TWO contains 'John , Pet'.
*     SY-SUBRC is 4, because TWO was not large enough to
*     accommodate the whole of the remaining string
SPLIT NAMES AT ',' INTO ONE TWO THREE.
*     ONE contains 'Charly', TWO contains ' John',
*     THREE contains ' Peter'.
SPLIT NAMES AT ', ' INTO ONE THREE TWO.
*     ONE contains 'Charly', THREE contains 'John',
*     TWO contains 'Peter'.
CONCATENATE NAMES '' INTO NAMES2 SEPARATED BY SPACE.
SPLIT NAMES2 AT DELIMITER INTO ONE TWO THREE FOUR.
*     ONE contains 'Charly', TWO contains 'John',
*     THREE contains 'Peter ', FOUR is empty.
SPLIT NAMES2 AT DELIMITER INTO ONE FOUR THREE.
*     ONE contains 'Charly', FOUR contains 'John',
*     THREE contains 'Peter', SY-SUBRC is 4, since
*     FOUR was not large enough (spaces are significant
*     characters!)
Reward all helpfull answers
Regards
Pavan

How to Break this String and put into a Table

Hi all,
Currently i working on the Reading of Csv file.THe Csv file wil be stored as BLOB in one table.
The Format of the Csv file is
EMPCODE :DATEOFBIRTH
312089 ,12/01/1984
321456 ,03/05/1980
120212 ,04/08/1987
312456 ,23/12/1977
311110 ,12/04/1998
323232 ,20/06/1990
UPLOAD_BLOB
column Datatype
UploadId Number
File_details BLOB
And i reading the BLOB in one procedure and i m getting the String as like this ---->
"312089 ,12/01/1984
321456 ,03/05/1980
120212 ,04/08/1987
312456 ,23/12/1977
311110 ,12/04/1998
323232 ,20/06/1990"
I am Dont know how to Parse this String and put in table
While 1<STRING.LENGTH
LOOP
EMPCODE=SUBSTRING();
DATEOFBIRTH=SUBSTRING();
INSERT INTO TABLE VALID_EMPCODE(EMPCODE,DATEOFBIRTH)VALUES(......);END LOOP
VALID_EMPCODE
EMPCODE VARCHAR2(30)
DATEOFBIRTH VARCHAR2(15)
Can any one tell me how to parse this whole string and break them

Duplicate post
How to Break this String and put into a Table

How To Split the String for "."

Hi Friends
I am Using Following Code to Split one String.
String str = "Jeetendra.choudhary";
String[] sp_str = str.split(".");
wdComponentApi.getMessageManager.reportSuccess(str[0]);
wdComponentApi.getMessageManager.reportSuccess(str[1]);
but its throwing null pointer exception.
when i am using following code its working fine.
String str = "Jeetendra/choudhary";
String[] sp_str = str.split("/");
wdComponentApi.getMessageManager.reportSuccess(str[0]);
wdComponentApi.getMessageManager.reportSuccess(str[1]);
what may be the issue and how to split the string with "." ?
Thanks & Regards
Jeetendra

"." is a special character.
Use
str.split("\\.");
Regards
Benjamin
Edited by: Benjamin Hansen on Dec 29, 2009 7:52 AM

How to split a string using IndexOf?

How would you split a string using indexOf and not using the .split method?
Any help is appreciated :D
Message was edited by:
billiejoe

would it be better to use the first or the second?
int indexOf(int ch)
Returns the index within this string of the first occurrence of the specified character.
int indexOf(int ch, int fromIndex)
Returns the index within this string of the first occurrence of the specified character, starting the search at the specified index.
I think the second would be helpful. so how do i read it?

How to Split the string using Substr and instr using loop condition

Hi every body,
I have below requirement.
I need to split the string and append with single quotes('') followed by , (comma) and reassign entire values into another variable. so that i can use it where clause of update statement
for example I am reciveing value as follows
ALN varchar2(2000):=(12ERE-3MT-4Y,4IT-5O-SD,OP-K5-456,P04-SFS9-098,90P-SSF-334,3434-KJ4-O28,AS3-SFS0-J33,989-3KL-3434);
Note: In the above variable i see 8 transactions, where as in real scenario i donot how many transaction i may recive.
after modification i need above transactions should in below format
ALTR Varchar2(2000):=('12ERE-3MT-4Y','4IT-5O-SD','OP-K5-456','P04-SFS9-098','90P-SSF-334','3434-KJ4-O28','AS3-SFS0-J33','989-3KL-3434');
kindly help how to use substr and instr in normal loop or for loop or while loop while modifying the above transactions.
Please help me to sort out this issue.
Many Thanks.
Edited by: user627525 on Dec 15, 2011 11:49 AM

Try this - may not be the best way but...:
create or replace type myTableType as table of varchar2(255)
declare
v_array mytabletype;
v_new_str varchar2(4000);
function str2tbl
         (p_str   in varchar2,
          p_delim in varchar2 default '.')
         return      myTableType
    as
        l_str        long default p_str || p_delim;
         l_n        number;
         l_data     myTableType := myTabletype();
    begin
        loop
            l_n := instr( l_str, p_delim );
            exit when (nvl(l_n,0) = 0);
            l_data.extend;
            l_data( l_data.count ) := ltrim(rtrim(substr(l_str,1,l_n-1)));
            l_str := substr( l_str, l_n+length(p_delim) );
        end loop;
        return l_data;
   end;
begin
v_array := str2tbl ('12ERE-3MT-4Y,4IT-5O-SD,OP-K5-456,P04-SFS9-098,90P-SSF-334,3434-KJ4-O28,AS3-SFS0-J33,989-3KL-3434', ',');
      FOR i IN 1 .. v_array.COUNT LOOP
         v_new_str := v_new_str || ''''||v_array(i)||'''' || ',';
      END LOOP;
   dbms_output.put_line(RTRIM(v_new_str, ','));
end;
OUTPUT:
=======
'12ERE-3MT-4Y','4IT-5O-SD','OP-K5-456','P04-SFS9-098','90P-SSF-334','3434-KJ4-O28','AS3-SFS0-J33','989-3KL-3434'HTH
Edited by: user130038 on Dec 15, 2011 12:11 PM

How to split a string into tokens and iterate through the tokens

Guys,
I want to split a string like 'Value1#Value2' using the delimiter #.
I want the tokens to be populated in a array-like (or any other convenient structure) so that I can iterate through them in a stored procedure. (and not just print them out)
I got a function on this link,
http://www.orafaq.com/forum/t/11692/0/
which returns a VARRAY. Can anybody help me how to iterate over the VARRAY, or suggest a different alternative to the split please ?
Thanks.

RTFM: http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14261/collections.htm#sthref1146
or
http://www.oracle-base.com/articles/8i/Collections8i.php

How to split a string having string as delimiter instude of char?

Hello Gurus,
I want to split the string and work on each split string.
The following code will do, but not exactly.
It's split into morethan three strings, where coma find.
But I want to split it using #,# as delimiter.
Here is my code:
//File fileData = new File("myfile.txt");
// This will have coma separated fields data
// while traversing this file will readLine() give the string, that is strRecord
// BufferedReader bfrdRdrObj = new BufferedReader(new FileReader(strDataFile));
//while ((strThisLine = bfrdRdrObj.readLine()) != null) {..........
String strRecord = #A001#,#User1#,#this is record, so need to split and place, insert into table#;
StringTokenizer strTknRec = new StringTokenizer(strRecord,"#,#");
int iCounter=0;
while(strTknRec.hasMoreTokens()){
System.out.println(++iCoutner+"Field: "+strTknRec.nextToken());
Please, give me hint.
Thanks in advance.
~ SubbaReddy .M

Hello Guru,
Here "myfile.txt" CSV file.
each line represented treated as a record and coma seperated string is treated as fields.
But, one of the fields data may have the coma in the string itself. So, # or " (double quote) has been place before and end of the field data as a string qualifier.
//File fileData = new File("myfile.txt");
// This will have coma separated fields data
// while traversing this file will readLine() give the string, that is strRecord
// BufferedReader bfrdRdrObj = new BufferedReader(new FileReader(strDataFile));
//while ((strThisLine = bfrdRdrObj.readLine()) != null) {..........
String strRecord = #A001#,#User1#,#this is record, so need to split and place, insert into table#;
StringTokenizer strTknRec = new StringTokenizer(strRecord,"#,#");
int iCounter=0;
while(strTknRec.hasMoreTokens()){
System.out.println(++iCoutner+"Field: "+strTknRec.nextToken());
And I would like to run this JRE 1.3.1
Hope, String.split() in JRE 1.4.0 beta will some what resolve this.
But, how to do it on JRE 1.3.1
Please, give me hint.
Thanks in advance.

How to split the string from character position.

HI ALL,
I need to split the string like this.
example:
String = "HelloWorld"
mid("HelloWorld", 2, 5);
it should print "ello"
menas mid is functiuon it will split "HelloWorld" from 2nd character to 5th character and prints "ello".
This one how to do in labview.
Regards
Punith

String Subset is the function you are looking for.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to split a string into alfa-numerics and numerics ?

Thru I/O Assistant.vi I queried a GPIB frequency synthesizer and get a string " FRq99999.999999Hz " ( this is a micro Herz synthesizer and the query shows the correct value ).
The "9"'s are alfanumerics as well as the " FRq " and the " Hz ".
Thru a string indicator I can see this complete value on the front panel.
So far so good.
But now :
1.
How could I separate the numerics ( in string format ) out of this string and convert them into numerics in order to have them displayed in some numerics graph form ?
2.
How could I delete the " FRq " and the " Hz " out of the string, so that the " 9 " 's remain and could be converted into numerics ?
This result wil be the same as my question #1 but now ther
e will be no A/N remainder.
Thanks for any help.

reteb wrote:
> Thru I/O Assistant.vi I queried a GPIB frequency synthesizer and get a
> string " FRq99999.999999Hz " ( this is a micro Herz synthesizer and
> the query shows the correct value ).
> The "9"'s are alfanumerics as well as the " FRq " and the " Hz ".
>
> 2.
> How could I delete the " FRq " and the " Hz " out of the string, so
> that the " 9 " 's remain and could be converted into numerics ?
> This result wil be the same as my question #1 but now there will be no
> A/N remainder.
Scan From String with a format string of "%.;%[^0-9]%f"
Explanation:
%.; : use point as decimal comma
%[0-9] : scan all characters not equal to 0 up to 9
%f : scan for floating point number using the decimal comma
indicated at the beginning.
Rolf Kal
bermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to split a string around "." expression

My code is:
public String removeExtn(String resource){
          String[] splittedName = resource.split(".");
System.out.println("LENGHT IS: "+ splittedName.length);
          if(splittedName.length >= 3)
               resource = splittedName[0]+ "." + splittedName[1];
          return resourceName;
     * @param args
     public static void main(String[] args) {
          Test obj = new Test();
          System.out.println(obj.removeExtn("myfile.xml.sample"));
But it doesn't split the string around "." and given the arraylength 0. But if I try to use any another character (e.g. "," or ";") it works perfectly fine.
Please help me.
Thanks in advance.
Mansi

Hi mansi,
I had a same kind of problem a few days back.
What I learned was the split() method has a string expression in it, which is usually noted as regex .
'Regex' is just a short form for 'regular expression'
You may directly use the string variable you would split around in some cases or may want to use a '\\' before some of the characters.
I can't place whole information here .So, let me give you that sun site link I read it from.
This link deals with the whole string class.
You may want to ctrl+F and split to read on split method.
http://java.sun.com/j2se/1.4.2/docs/api/java/lang/String.htmlThis link talks about the regular expressions
http://java.sun.com/j2se/1.4.2/docs/api/java/util/regex/Pattern.html#sumI got his for you from that link :
\p{Punct} Punctuation: For One of !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ This is for your knowledge.
And if you want a quick fix just for your code...
that'ld be using a
split(\p{.}) in place where u used a split(.)I have not tried that ...but u may want to!
Hope that helps.
Message was edited by:
Kishorei20
Message was edited by:
Kishorei20

How to split this string(char1)char2(char3)char4 into (char1)char2 , .. etc

Similar Messages

Maybe you are looking for