How to stablish an email into to the printer so it can receive sent email?

How to establish or give an email to my printer so it will receive emails.
Manny
HP 4620 e printer

Hi,
Welcome to suport forum.
To find the printers email address you'll need to enable web services from the printer front panel. It's normally a button on the front panel or an option in a menu there.
The printer will need to be connected to your WiFI network and once the device is enabled it should print a page with a code made up of letters and numbers. This is the printers email address (when you append @hpeprint.com to it).
Once you have this, go ahead and setup a HP Connected account and register the printer to your account. This will enable you to manage the ePrint settings of the printer as well as track its job history.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

How do i scan a document from the printer to send in an email to some one else i have a HP-B209

how do i scan a document from the printer to send in an email to someone else

Hi!
To scan:
You may press the start scan button on the printers control panel or use the HP solution center that must be installed in your computer to scan a document or photo.
Scan to email:
Some printers don't have the option in the control panel for scan to email. Mostly it is with the HP solution center software that should be installed in your printer.
Note:
For Windows the software is called HP solution center
For Mac it is called HP utility
*I am part of the HP family but I do have my own stand
*Clicking the Kudos at the left is highly appreciated
*Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
*Have a HP "Happy Printing" day! =)

Urgent:How to modify a script without changing the print programme

Hi all,
Can any body pls tell me <b>How to modify a script without changing the print programme</b>
Give m esome real time examples.
Good points willbe rewarded
Thanks

Hi
You can write a external Subroutine to fetch the extra data into the script program
see the following sample code
How to call a subroutine form SAPscripts
The Form :
/:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM.
COPING SCRIPT
There are some Standard Sap Scripts in SAP. We cant directly execute them in scripts we have to use some T-codes and by giving some input to the required fields we can see the output printform.
I will show one example. There are some Standard Sap Scripts such as MEDRUCK which is a standard Sap Script for Purchase Order and RVINVOICE01 for billing and so on...
To see oupt of MEDRUCK go to T-code ME9F give purchase order number and execute select one number and click on dislplay messages button on application tool bar you can find the print form of MEDRUCK.
You cannot change the Standard Sap Scripts but you can use Standard Sap Scripts and Copy them to userdefined Script and can make changes to them and replace standard Sap Script with usedefind script.
Ex: Go to SE71,
on menu bar u find Utilities->copy from Client. click on it u ll find new screen showing
Form name:
Source Clinet:
Target Form:
give Form name as usedefined form name EX: ZFORM1
Source client as 000 and
Target form as MEDRUCK.
execute.
Now, the standard from MEDRUCK is copyied to your form ZFORM1.
NOW, go to SE71 and give form name as ZFORM1 and do some changes to the form such as adding logo any thing. save and Activate.
Now, you have done changes to the Form ZFORM1 and u have to replace your form with standard SAP Script.
Go to NACE Transaction.
on Applications select EF for purchase order and click Output types button on application tool bar.
now select NEU as output types dobule click on Processing Routines.
now click on Change option on application tool bar and on right side u find MEDRUCK in form place replace MEDRUCK with ZFORM1 and SAVE.
go back twice and now go to T-code ME9F give the purchase order number and execute and select one option and click on display messges button .
you will find the changes that you have done in ZFORM1. so we cant chage the standard Sap Scripts by copying the Standard Sap Scripts we can chage and replace with our forms
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4089895&messageID=3239299
Regards
Message was edited by:
Kiran Sure(skk)

I just downloaded music in a .flac format. how do i get that into my itunes library so i can listen to it on my iMac, iPhone and Sonos?

I just downloaded music in a .flac format. how do i get that into my itunes library so i can listen to it on my iMac, iPhone and Sonos?

Sneedham,
iTunes is not capable of playing songs in FLAC format.
To use the music in iTunes get a 3rd party converter such as Switch and create versions in an iTunes compatible audio format such as MP3, AAC, Wav or AIFF.
Keep the original FLACs on hand for times when you are using a more capable music player.

An you tell me how to add an advanced action to the TEB so you can check for multiple lines of input

an you tell me how to add an advanced action to the TEB so you can check for multiple lines of input? How do you add the advanced action?

Can you elaborate your requirement?
If you want to have a text wrapped around and enable a scroller for the same, you can achieve it by TEB properties and check the scroll bar option,
Is this what you are looking to achieve?
Thanks,
Anjaneai

How do I center my spreadsheet in the print option

how do I center my work in the print option

Duckie,
I think your best bet is to copy your work to Pages when you get ready to print and center it there. Much easier.
Jerry

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
i have been to the local apple care store and they are clueless, too.
should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
thanks...sorry it was you who got this problem..

How do I add adobe reader to my printer so I can print a pdf?

How do I add adobe reader to my printer so I can print a pdf?

Are you trying to print to a PDF from Adobe Reader?
If so, you need Acrobat for that. Reader doesn't not install a PDF printer.

I scanned some black and white negatives into my computer (iMac) where they were stored aas positives on the hard disc. When I import them to iPhoto they turn back into negatives. How do I change them into positives for printing?

I have scanned some black and white negatives into my computer(iMac) where they are stored on the hard disc as positives.When I import them into iPhoto to print they turn back into negatives.How do I turn them back into positives?

That's because you scanned them as B/W photos and iPhoto 08 doesn't support the grayscale color profile. You can either rescan them as color photos or export them as originals out of iPhoto to a folder on the desktop and applhy this Automator application, Convert to JPG and Embed sRGB Profile, on them and then remimport into iPhoto. You can download it from Toad's Cellar . Be sure to read the warning on the website about not applying it on your only copies.
OT

When I am on Firefox, my Netzero email page suddenly dropped to very small print. AOL OK. How do I increase size of the print so I can read the email?

I was using Firefox to read my Netzero email. The print suddenly dropped down to very small and I have difficulty reading the email. Netzero said to oper Mozilla Firefox, click "tools", click "options", and click "content" to change the font to a bigger size. But when I clicked the brown "Firefox" button on the Firefox page, I do not see the buttons Netzero told me to click. Can you tell me what they are referring to or just tell me how to increase the size of the font when I am reading email on Netzero. AOL email font size was not affected when I clicked AOL to read the email there.

See this and reset the zoom level there: <br />
https://support.mozilla.com/en-US/kb/Page+Zoom

How to send a report DIRECTLY to the printer (Linux App. Svr.)?

Here is the problem:
-- We have Windows clients / Linux App Server / Forms 10g R2.
-- Printers are attached to the Windows clients.
-- When we want to send DIRECTLY to the printer, we have to write data into a text file (using TEXT_IO) &
-- print the same using command HOST('lp -d '||<printer IP of logged in user>t||' '||<file name>,NO_SCREEN).
-- Our normal reports are displayed as PDFs.
Is there a way to directly send the PDF to the printer without having to re-write the report to a text file?? Then we can just use the PDF output and don't have to do any code changes (i.e. redo every report).
Edited by: user12240205 on May 16, 2011 5:59 AM
Edited by: user12240205 on May 16, 2011 5:59 AM

InoL wrote:
Use destype=printer.
The printer on the Windows client has to be defined as a network printer and be known on the Linux server.
Other options:
- use the orarrp utility
- if you call your Reports from Forms, you can use a Java bean
http://forms.pjc.bean.over-blog.com/article-6621538.html
Thank you for the quick response. Can u please tell us how to make the printer "known" as a Linux server?? Will a normal network admin know how to do this or is it an Oracle developer's task?

How do I export a PDF without the print bleed extra "stuff" around the edges?

I know my question wording sucks, but I didn't know how else to put it.
I created a document in ID for print with a bleed. When I export to PDF, the image is not cropped to the finished size of the page, but includes the excess background images that I extended beyond the page bounds for a bleed. I am now trying to export a PDF that can be sent in email and will not be printed, and so I would like to export a PDF file that does not have any of that extra stuff (I have turned off the printer's marks) around the edges. But my PDF has the excess stuff and a red outline around the actual page dimensions. How do I export a PDF that is cropped to the correct page size (8.5" x 11")?
I have attached the PDF I have created with the excess stuff and the red outline around the page size so you can see what I mean.
Thanks!
Bryan

Hello,
i have a problem exporting as a PDF also, i have done this before successfully and i have unchecked all the boxes to turn off bleeds etc, etc... however the bleed area is still coming through. I have tried saving the file under another name, closing down and reopening - nothing seems to work. I'd be very grateful if someone could offer some advice on this.
Thanks!
John

How to I add ADPDF9 PPD to the printer description file in InDesign CS6?

I am having problems creating a clean PS file for booklet spreads and was advised to add ADPDF9 PPD to the printer description file in InDesign CS6. Can someone please tell me how to do this?

@Ihatecomputers – yes. Quite simple, if you have the PPD file at hand:
On Max OSX:
1. Go to Applications / Adobe inDesign CS6 / Presets
2. Create a folder with the following exact name: PPDs
3. Copy ADPDF9.PPD into that folder
Restart InDesign.
Uwe

HP Officejet 8600 Pro - how to change scan resolution presets at the printer

I have an HP Officejet 8600 Pro and wish to scan to email from the printer and wish to change the default resolution setting. I would like to change the default scan resolution so I dont have to remember to change it every time I scan.
If I change it with the HP Windows Printer Assistant software it only seems to change the resolution for this time and only from the computer not at the printer.
Is it possible to change the scan resolution settings at the printer? I cant find detail in the manual or on the printer console.

bvlusa,
Open the Icon labeled Officjet Pro 8600 on your desktop, and then click on Scan a Document or Photo. When the Scan application window opens you can change the Resolution from the drop down menu.
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HT203176 My start-up disc is nearly full. I have another disc, an ex-time machine disc, that is available. How do I make it known to the system so it can be used?

I am getting a message that my 250 gb hard drive is nearly full. I have deleted many files without making much difference. I am unable to update any software now. I have a 500 GB drive that was used for Time Machine but is now available to use. I have cleared the data from it, now how do I make this drive available to the system?

You can't.
Move some more data to that other drive to free up space on the startup drive.
Don't forget to empty the Trash.

How to stablish an email into to the printer so it can receive sent email?

Similar Messages

Maybe you are looking for