How to stack a SG500 and SG500X switch?

Hi, I've been trying to stack three switches a SG500-28P a SG500-52P and a SG500X-28P - the SG500s stack fine, however when I added the 500x to the stack, the unit deactivated itself and took itself off the network - not good as it was the core switch! 
Any ideas what's going on, are they using a different stack protocol to the others - I was just going for native and 5G ? 
Firmware was 1.3
Many thanks,
Chris 

Hi,
SG500 and SG500x only supports native stacking.
Native Stacking—A device is capable of joining other devices in native 
mode with its stack ports to form a stack. All units in a native stack must be 
of the same type (all Sx500 or all SG500X).
See the attachment
Regards
Moorthy

Similar Messages

  • 375o switch in stack, only 2nd and 3rd switch reboots

    Hi,
    In customer place we are having three 3750 switch and it was stacked and working fine. Few days back the in stacked switches 2nd and 3rd switches are rebooted continuously and found in the show version command as: Data TLB Miss Exception (0x1100)!.
    From last 4 days we are not found any reboot. Please let us know any software bug is triggered to cause this problem, if upgraded please let us know the image to be put in all the three switches. I am sending the show tech output of all the 3 switches and show stack output.
    Thanks in advance.
    Regards,
    Ram

    This URL should help you:
    http://www.cisco.com/en/US/products/hw/switches/ps5023/prod_release_note09186a00801b476a.html

  • Itunes on my Ipad takes me to the American store, tells me I can't access and to switch to the Canadian store.  I am Canadian.  How do I switch?

    Itunes on my Ipad takes me to the American store, tells me I can't access and to switch to the Canadian store.  I am Canadian.  How do I switch?

    Changing App Store Country
    settings/itunes & app store, tap ID, tap view ID, log in, tap country/region then select the country you want
    See "Change your iTunes Store country" > http://support.apple.com/kb/HT1311

  • HT204266 My new iPad, when I try to get something from the Apple Store it tells me that My account isnot vlaid for use inthe U.S.store.  And to switch to the Australian store before purchasing, how do I do this?

    My new iPad, when I try to get something from the Apple Store it tells me that My account i snot vlaid for use in the U.S.store.  And to switch to the Australian store before purchasing, how do I do this?  I am in Australia?

    There are instructions on this page for creating an account without a credit card : http://support.apple.com/kb/HT2534
    You can download a copy of the iPad manual from here : http://support.apple.com/manuals/ipad/

  • I just updated my iphone to 5 and it switched to a different language. how do you change it back to English

    i just updated my iphone to 5 and it switched to a different language. how do you change it back to English

    Go to:
    Settings (gear icon)
    Scroll to General (gear icon) (Third option box from top)
    Scroll all the way down > Select Third option from bottom (international)
    Select first option (language)
    Select English
    Select Done

  • When I go to update apps or go into the I store it tells me I am in the us versions and need to go to uk version how do I do this and why has it switched?

    When I go to update apps or go into the I store it tells me I am in the us versions and need to go to uk version how do I do this and why has it switched?

    See  >  Change your iTunes Store country
    Here  >  http://support.apple.com/kb/HT1311

  • TS1702 My Iphone says that I cannot update because I am in the US store and must switch to Canada, which is where I live, but I never had this issue before. How do you switch

    My Iphone will not let me update the apps, it says that I am in the US store and must switch to the Canadian store, which is where I live, but it never has done this before. How do I switch? I log on my computer and it is the same in the Itunes store

    See  >  Change your iTunes Store country
    Here  >  http://support.apple.com/kb/HT1311

  • HT204368 I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    NovaRiddle wrote:
    I am having trouble pairing my iPhone4 with bluetooth device. ...
    Depends on the device...
    Have a look here for Supported Bluetooth Profiles
    http://support.apple.com/kb/HT3647

  • How do I keep my iPad from switching back and forth from my Apple ID to my husbands Apple ID?

    How do I keep my iPad from switching back and forth from my Apple ID to my husbands Apple ID?

    Your question confuses me because there is no way that the iPad can switch Apple ID's without user input. Where are you seeing evidence of this?
    If you are seeing app updates that require your husbands ID, that's because those apps were purchased with his ID and will always require his ID and password for updates.
    If you are seeing his ID elsewhere, explain....

  • How to telnet to one of the switches in a 3725 stack?

    Hi,
    I have this stack of 3 x 3725 switches. When I set up the stack, I configure the master switch to have a certain IP address. I can telnet to this IP address no problem.
    However, what should I do if I want to telnet to the other slave switches?
    Can I do something like "telnet x.x.x.x:2"?
    Thanks in advance.

    Hi Blue,
    You can access all or specific stack members by using the "remote command {all | stack-member-number}" privileged EXEC command. The stack member number range is 1 to 9.
    You can access specific stack members by using the "session stack-member-number" privileged EXEC command. The stack member number range is 1 to 9. The stack member number is appended to the system prompt. For example, Switch-2# is the prompt in privileged EXEC mode for stack member 2, and the system prompt for the stack master is Switch. Enter exit to return to the CLI session on the stack master. Only the show and debug commands are available in a CLI session to a specific stack member.
    This link may help you with some information to manage stack
    http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12220se/3750scg/swstack.htm#wp1044402
    HTH, if yes please rate the post.
    Ankur

  • How do you scroll up and down on the library and playlists? I can only see an up arrow at the top of the first column on the left and it only switches between the top 28 songs and the bottom 28.

    How do I scroll up and down playlists and library on the new iTunes format.? When I ckick on the arrow in the box at the top of the far left column it only switches between the top and bottom 28 songs.

     Hi
     I looked at the specs for your laptop and there is no HDMI out port for this model but RGB & Headphones out jack should work. Here is the link for closeup views of the ports.
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L555D-S7005&rpn=PSL...
    Click on product tour.
    Qosmio X505-890=i7-740QM-6GB DDR3-64 GB SSD-500 GB SATA-
    BR-Rom-DVD Burner-HD 18"Display-GTS360M-1GB-GDDR5
    HP 17 Envy 3wks Returned
    DIY Desktop Builds

  • ITunes says my account is not valid in US store and must switch to Canadian. How do I switch?!

    WHen I try to download new apps or update the ones I have it tells me that my account is not valid with US store and must switch to Canadian. How do I switch? I've never had this issue before. It started a week ago please help

    Hi Lisajayne83!
    I have an article here that can help you change the country in your App Store settings:
    Change your iTunes Store country
    Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
    Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Etherchannel between stack switches[3750] and standalone switch[3560]

    Hi,
    I have 2*3750 switches in stack as core and 1*3560 switch in access layer. I want to enable ether channel between stack switch[3750A & 3750B] and 3560 switches.
    Have connected  2 links from 3560 switch to stack switch, one link to 3750A and other link to 3750B. Will it work in this way as per my requirement? 
    or i should enabled stacking on 3560 switch too and configure cross-stack ether channel between 3750 stack and 3560 stack. i refered few cisco documents, but the cross stack etherchannel configuration example has 3750 at both end stacks.
    Rgds...
    VikramS

    Hi,
     This should work fine as per you set up, the 3750 stack will be acting as one switch, which means that the ether-channel configuration should be straight forward. There is no need to stack the 3560 for this to work, also the 3560 are not stackable.
    Hope this helps.

  • Impossible to get month-to-month subscription with student account - now I have to pay cancellation fee! Is there a way to switch back to month-to-month, or was I tricked into getting a yearly subscription? How do I cancel my subscription and/or switch to

    Impossible to get month-to-month subscription with student account - now I have to pay cancellation fee! Is there a way to switch back to month-to-month, or was I tricked into getting a yearly subscription? How do I cancel my subscription and/or switch to a monthly plan WITHOUT paying fees and WITH a student discount?

    This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
    Adobe contact information - http://helpx.adobe.com/contact.html may help
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Whenever I have a pdf document open, and then switch to another tab to view another webpage, the scrolling function on the touchpad will not work. This seems to be a glitch with Mozilla, according to Dell. How do I fix this?

    When I open a pdf document (like an E-version of a newspaper) in Mozilla and then switch to another tab to view another webpage, I am unable to use the scrolling function on the touchpad. I have to use the up and down arrows to get other pages to scroll. When I close that pdf document, everything works fine. I talked with customer support with Dell, and he said it was probably a glitch with Mozilla. So I tried to do the same thing on IE, and there was no problem scrolling with the touchpad while a pdf document was open on another tab. I would like to get a fix for this so I don't have to keep closing open pdf documents in order to scroll with the touchpad while on other tabs. Thank you

    Hi elliezzz,
    If you are having issues with your iPhone not being recognized by iTunes, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Regards,
    - Brenden

Maybe you are looking for