How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

Hi Every Body,
1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
-- I have download all files from e-delivery and check the md5 and all files are OK.
I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
2- Was that a problem ?
-- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
thanks in advance.

Hi,
Most of the instructions you have mentioned , already was configured.
except for the tmp and temp directories.
And even I changed them from System Properties >> Advanced >>  Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
I attach the conf_VIS.txt file because I thought it may help.
http://www.4shared.com/document/1bS6aio5/conf_VIS.html
Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

Similar Messages

  • Oracle 11.2.0.3 on Windows Server 2008 R2 64-bit

    Good night Oracle community,
    I'm having problems on using Oracle 11.2.0.3 on Windows Server 2008 R2 64-bit that runs inside a virtual machine.
    The first problem was the error ORA-12152 (unable to send break message) when using a 32-bit server version when trying to connect via SQLPlus using domain administrator user. I did reboot, tnsping, checked parameters and oracle support articles but neither help me. So I uninstalled it and installed the 64-bit version and it wasn't possible to run the applications like netca.
    Now I installed it on a local profile version 32-bit to see if the problem was related to the domain.
    My question is simple: is this environment ok to run a production database server? 11.2.0.3 is that stable with Windows 2008?
    Thank you very much!

    Oracle Database 11.2.0.3.0 is certified on Microsoft Windows (32-bit) 2008.
    Error: ORA 12152
    Text: TNS:unable to send break message
    Cause: Unable to send break message. Connection probably disconnected.
    Action: Re-establish connection. If the error is persistent, turn
    n tracing and reexecute the operation.
    Refer to MOS
    ORA-12152 "Unable To Send Break Message" on Connection [ID 363638.1]

  • Oracle ILM assistant for Oracle EBS R12.1 application with 11.1.0.7 DB

    Oracle ILM through its ILM Agent, which is a database component provides option for data archiving.
    Need to know how ILM agent can be used against Oracle EBS R12 and the options available:
    a. Does ILM assistant map to industry Compliance requirements and can we add or modify based on additional Client requirements
    b. Is this configured for all components and are the business rules (default) taken care in terms of archiving related data, if not what are the options available
    c. What are the options to archive data
    i. On Same and archive database
    ii. Other RDBMS (mysql, or open source database)
    d. Access to archived data
    i. Is archive data available from the existing application or only from backend database
    ii. Does ILM assistant provide options to access archived data (same Oracle RDBMS or heterogeneous database)
    e. Retention options
    i. Does ILM assistant provide multi tier retention options for archived data for different range (# of years)
    Edited by: user9031099 on May 9, 2013 11:00 PM
    Any update on my query please...?

    Limits the Preferred Read-Write Tablespace to only 1 where as in Oracle EBS we would require multiple tablespaces to be Preferred Read Write. Can we extend the functionality of ILM assistant to have multiple Read-Write tablespaces...?

  • Oracle XML Gateway Message Designer for Oracle EBS R12.1.2

    Goog Day to everyone!
    I'm Looking for the tool "XML Gateway Message Designer". I have found in Metalink(Oracle Support) the note ID 557101.1, here explain how to get the message designer for Oracle Apps R12. It says that you have to download the patch 4066964. This patch install the Oracle Workflow Builder (2.6.3.0.1) and the Oracle XML Gateway Message Designer (2.6.3). This tools are supported to be used with Oracle Apps 11.5.10 and 12.0.X.
    The release of Oracle Apps that I'm using is 12.1.2.
    Questions:
    - The version of the Message Designer that you get from patch 4066964 works for OraApps R12.1.2 ?
    - The version of the Workflow Builder that you get from patch 4066964 works for OraApps R12.1.2 ?
    - If the version of Message Designer doesn't work with OraApps R12.1.2, where can I find one that works with it?
    Thanks for your advice.
    LCJ

    Hi Hussein,
    Thanks for replay.
    I downloaded the rapid install package from e-delivery. The B53824-01_4of4 was the OWB installer, and it has a readme file that says: "+This patch contains Oracle Workflow Builder (version 2.6.3.0.1) and Oracle XML Gateway Message Designer (version 2.6.3). These client tools are supported for use with an Oracle E-Business Suite Release 12.1 instance.+"
    I believe, as well as you, that it should be work for 12.1.2.
    I'm gonna make some test, and in a few days I will post my results.
    Thanks for the help.
    LCJ

  • Number of Tables in Oracle DW for Oracle EBS R12

    Hi All,
    What are the number table created when we select Oracle EBS R12 as container? In our scenario there were 360 tables that were created. But Issue with DWH DB tables creation it shows that 779 are created?
    Thanks in Advance,
    Dev

    Hi, my 7.9.5.1 datawarehouse has *787* tables (and 730 indexes).
    BTW Is the data warehouse is source independent? I thought it has the same number of tables whether you plan to load from none or any of EBS 11 / EBS 12 / Peoplesoft / Siebel or SAP or some other system. I can load from EBS11.5.10.2, then if I choose, i can truncate everything in the data warehouse, then load fom EBS R12. I dont need to recreate the warehouse in order to do this - the structure of the data ware house stays the same. Right?
    If you look at the DAC log file from the data warehouse creation operation you will see that the command issued was
    C:\app\oracle\product\1013\dac_1\DAC\log\config\createwtables.log:
    C:\app\oracle\product\1013\dac_1\DWREP\BIN\DDLIMP /I N /s N /u BAW /p ******* /c BAW /G "SSE_ROLE" /f C:\app\oracle\product\1013\dac_1\DAC/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b BAWDATA /K BAWDATA /X BAWINDEX /W N
    There is only one version of the ctl file. It is the same whether you are in the 11 or 12 container?

  • Oracle EBS R12 installation problem in Windows 2003

    Hi,
    I am trying to install Oracle EBS R12 on Windows 2003 R2. I have installed cygwin along with required packages and also Visual studio 2005 as specified in the prerequisites of installation document.
    All the validations are successful before installation but I am facing error during installation in Step3 at about 53 percent. When i checked the log file, I found that some of the files required for installation are not found in my staging area. Now I want to run MD5sum on the Staged Files.
    I had downloaded md5sum_windows.txt and also run this command :
    md5sum --check md5sum_Windows.txt > md5sum_result.txt
    In md5sum_result.txt, I am getting error for all files. Error message is as :
    oraAppDB\Disk1\data\driver\Disk1.drv
    : FAILED open or read
    This is repeating for all files. But i can see that the files are present in My Staging area. Do i need to set some permission for this. Please help. Desperately want to install EBS as part of perparation for my planned certification.
    Edited by: 855292 on Nov 26, 2011 1:58 AM
    A simple detailed Step by Step Installation Document or any good reference for the same would by really appreciated.
    Edited by: 855292 on Nov 26, 2011 2:00 AM

    I have downloaded all the 33 files in oracle edelivery site. I have seen a post of yours regarding Oracle R12 installation on Windows XP. It mentions only some 25 files. Please do not rely on the that thread as it was for 12.0.x installation.
    For R12 (12.1.1) you need to download the following files:
    From: Oracle E-Business Suite Release 12.1.1 Rapid Install Start Here (Part 1 of 4)
    To: Oracle E-Business Suite Release 12.1.1 for Microsoft Windows (32-bit) Rapid Install APPL_TOP - Disk 2 (Part 2 of 2)
    Is it possible that contents of the zip file are lost during download because my stage area is about 39 GB . and also I have verfied all the files in edelivery site is downloaded too.
    Also the error i mentioned in my last post, I can see the file in the directory but still its showing read error. Is it due to corruption of data. That would mean that I will have to download all 40 GB again :-(It is easy to verify the contents of the stage area directory without running md5sum, so please do so and post the results here.
    Thanks,
    Hussein

  • Oracle 11g R2 install problem on Windows Server 2008 R2 SP1

    Hi all,
    Trying to install the Oracle 11g R2 database onto Windows Server 2008 R2 SP1.
    I get as far as running the setup and a black window flashes up on the screen and disappears.
    The log files only show the following:
    Using paramFile: C:\Temp\database\install\oraparam.ini
    Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
    The number of files bootstrapped for the jre is 0.
    The number of files bootstrapped for the oui is 0.
    I've tried running setup -debug from the command line but no further information is logged.
    Any help in troubleshooting further is appreciated.

    That is the complete log file. No error messages or further information is given.
    I'm not sure how to check:
    Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
    I have checked on:
    http://docs.oracle.com/cd/E11882_01/install.112/e24283/toc.htm
    The server meets all the hardware requirements. The default file share is accessible and it is running a supported browser. The installer is being run with Admin rights. I'm not sure what else I need to check.

  • Oracle 10.1.0.4 on Windows Server 2008 64 bits Standard

    Hello,
    For migratiion purposes, we would need to install Oracle 10.1.4.0 on a Windows Server 2008 64 bits Standard, and then upgrade it to 11g.
    We have forced Oracle 10.2.0.4 installation on a Windows Server 2008 64 bits Standard, but we are not sure for 10.1.0.4.
    Since we don't have that software version to try it and we are looking for it, is it possible to install Oracle 10.1.4.0 on a Windows Server 2008 64 bits Standard?
    Could you point me out a document that reference Oracle versions compatibilty with Windows Server 2008?
    Thanks

    At MOS, click on the certifications tab, then enter database in the first drop down box, and select the rdbms. Then enter the relevant info in the other boxes, and then you will see Oracle Database 10.1.0.4.0 is not certified on Microsoft Windows x64 (64-bit) 2008 R2
    Certification is a little more strict than supported, but extended support ended in January.      REMINDER: Premier Support for Oracle Database 10.1 ends January 2009 [ID 761713.1]
    There's always lifetime support, but your case shows how useful that can be.

  • How do you repair ntoskrnl.exe error or system error in windows server 2008 and 2012

                              
    hi,
    can you repair system file errors like  ntoskrnl.exe in windows server 2008 and 2012  like   like before  in windows server 2003 ?
     the steps were  repairing ntoskrnl.exe  error in windows server 2003
    1- have a 2003 cd and from that cd  start recovery console and copy from i386 directory ntldr and ntdetect.com to  windows /system32 directory on the  server and then repairing
    2- MBR with fixmbr command  and then  rebuild BOT.INI file  with bootcfg/rebuild . 
    now my question  is how you repair or solve such problem with ntoskrnl.exe error  in windows server 2008 and windows server 2012
    thanks
    johan
    h.david

    first this wil take a lot of time for windows 2008 and 2012 ,
    and what about windows 2003 I thing this has no startup repair
    thanks
    johan
    h.david
    What will take a lot of time? Repair or clean install? These days one can standup a new VM and have an operating system on it in around 20 minutes or so.
    Correct server 2003 is file based deployment and completely different OS from repair perspective as well.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Running oracle database xe (express edition) on windows server 2008 r2

    Is it supported to run Oracle Database XE on Windows Server 2008 R2?
    Database XE is only supported as 32-bit. Current builds of Windows Server 2008 only come in x64 configurations.
    Here are the Database XE system requirements for windows:
    [http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm]
    The docs say that 32-bit windows is required, yet they also say that windows server 2008 is supported.
    Windows Server 2008 R2 came out in 2009, and in R2 they eliminated 32-bit OS (though there is the WOW64 subsystem to run 32-bit programs within the 64-bit OS).
    See:
    - [Wikipedia page about windows server 2008 with info on R2|http://en.wikipedia.org/wiki/Windows_Server_2008#Windows_Server_2008_R2]
    - [Wikipedia page on "windows 32-bit on windows 64-bit"|http://en.wikipedia.org/wiki/WOW64]
    Thanks,
    Matt

    Hello Matt,
    Is it supported to run Oracle Database XE on Windows Server 2008 R2?No.
    The docs say that 32-bit windows is required, yet they also say that windows server 2008 is supported.So this means that only 32bit versions of 2008 will be supported.
    Windows Server 2008 R2 came out in 2009, and in R2 they eliminated 32-bit OS (though there is the WOW64 subsystem to run 32-bit programs within the 64-bit OS).Which is probably why 2008 R2 is not supported.
    You can either take the VM approach and install a 32 bit Windows or 64 bit Linux host, or you can queue in the list of persons waiting for a 64 bit Windows release. See the following thread for details (and the queue) for the latter: {thread:id=2277728}
    -Udo

  • How to Install AS 10g version 10.1.2.3 on Windows server 2008 64bit

    Dear
    Exparts, Hope you are fine.
    Application Server: Standalone 10.1.2.3
    OS: Windows Server 2008 64bit
    Hardware: Intel Xeion ProcessorI know Oracle Application Server 10g & Standalone my version is 10.1.2.3 is not competible with Windows Server 2008 64bit.
    But i need to install. Have any one has successfull experiances to do so ?
    Please share and guide.
    Waiting for your valuable responses.
    ask2learn

    Dear Marcus,
    Thanks for your reply.
    I tried Application Server Stand Alone and success.
    So, i closed the thread.

  • Oracle 10g xe 32 bit on windows server 2008 64 bit

    I have windows server 2008 64 bit and oracle 10g xe 32 bit
    does it work on ?
    I have tested but no success.
    Any one knows reasons

    You seem to have posted threads before on very similar topics, and you also posted this once in the appropriate forum:
    {thread:id=2270082}
    Please avoid duplicating posts!
    As already stated in one of your other threads, it is not a certified combination. Again, read the Installation Guide !
    If you want to play with it and try to make it "work", that's up to you. And as you say you have already tried, with "no success", it seems you already got an answer.
    I suggest you close this thread and continue in the dedicated 10g XE forum thread (or try the 11g XE Beta - only for 32-bit Windows yet, but there's a chance the general release will be aimed for Windows x64 as well).
    Edited by: orafad on Aug 20, 2011 1:14 PM

  • Oracle Dev-suite 10g installation on WINDOWS server 2008 R2

    Hi Friends,
    Is it possible to install Oracle Dev-suite 10g on WINDOWS server 2008 R2.Any idea on this,can you please share.
    Best regards,
    Rafi.

    Hi John,
    Is it possible to do this by applying any patches or alternate option.
    Best regards,
    Rafi.

  • Does Lexmark 4227 plus printer is supported for Oracle EBS R12.0.6?

    Hi
    Our sysadmin installed Lexmark 4227 plus printer on AIX 5.3.7, printing perfectly from AIX. But when i register printer in EBS R12.0.6, it is printing Garbage for text type report. Could not find driver definitions for Lexmark type printer. How to define? I am unable to resolve issue. Can anybody help me?
    Regards

    Ateeq,
    Use lp command on Unix/Linux, and on Windows use print command.
    Windows:
    print /D:\\<server_name>\<printer_name> <file_name>
    Unix/Linux:
    lp -d <printer_name> -n<copies> <file_name>Where file_name is the concurrent request output file.
    Note: 784640.1 - Any EBS Requirements For Local or Remote Printers
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=784640.1
    I believe Oracle Apps does not come with seeded drivers/styles for Lexmark printers, so you may need to try with different predefined styles/drivers. Also, contact your vendor and see if they have any clients with this printer configured on Oracle Apps.
    Regards,
    Hussein

  • Costing  Process for Oracle EBS-R12 Inventory Management System.

    My clients are going to used EBS R12 for inventory and Purchasing Inventory Organization is not process Enable. Business type like Just import finished goods By (LC) & maintain stock status.
    My clients wants to maintain stock status by Average Costing. In which table I can get information of costing & how can I setup costing process?
    Thanks
    Omar

    I need to list of APIs for inventory module specially for quality.List of APIs can be found in iREP website.
    iREP
    http://irep.oracle.com/index.html
    In R12, Oracle Integration Repository is shipped as part of the E-Business Suite (as a responsibility).
    Oracle Inventory Management Application Program Interface ( APIs) [ID 729998.1]
    Thanks,
    Hussein

Maybe you are looking for