How to start 3g ipad?

i just bought my ipad 2 3g, but cant switch it on, it shows charge and itunes screen all the time. How do i start it?

It needs to be activated within iTunes on your computer before you can use it. From the article referenced above ...
Before you can use your iOS device, you must set it up using iTunes:
Download and install the latest version of iTunes.
Connect the device to a USB 2.0 port on your Mac or PC using the Dock Connector to USB cable.
Complete the onscreen instructions in iTunes and select the content you want to sync.
iTunes will guide you through the setup process after you connect the iPad to the computer and while iTunes is running. You must be running iTunes 10.5 on your computer as well.

Similar Messages

How to start my iPad ?

The screen of my iPad went suddenly black and I can't start it again no matter what I do. It is fully charged.

Did you try this?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How will start my ipad. because it stops in the beginning choosing a network, how will start my ipad. because it stops in the beginning choosing a network

i have a new i pad. when i turn on it. first language selection appear, then country , i selected pakistan in country selection. then location services appeared. i disabled location services and then click on next. after disable location services window appeared. i pressed ok button. then choose a network appeared. after processing some times it stops. i processes continual. and not goes forward. i am much worried about it. how will this screen will go forward and show its next button.please help me quickly.
thanks

Hi Gak,
Thanks for the suggestions. I still didn't got it to work though. I moved the stop command to inside the while loop like you said but it didn't work. The problem seems to be in the communication between the producer/consumer loops. When I run the VI in highlight, the queue message "trigger camera" leaves the producer and arrives at the consumer loop in the appropriate time, starting the "trigger camera" state of the case structure. However, the message "stop" doesn't seem to be sent by the producer loop, so the consumer doesn't receive a signal to start the "stop" state of the case structure. Can you think of anything I should change in the producer loop so that the second state (stop) is added to the queue?
About the functional global, I read about it, it seems that either that or a local variable could work, but I don't quite know how to implement it in my state machine, since the stop of the first while loop isn't activated in the "stop" state but in the "shutdown" state. It works more or less like this: after 10 loops of triggering and stopping the camera, light and valve (so after acquiring 10 movies), it goes for shutdown. Can you show me what you had in mind with the functional variable?
Attachments:
Untitled.jpg ‏286 KB

Since iCloud weeks only start on a Sunday in iPad, preferences on iMac allow week to start on any day. How can I change iPad week start to match iMac?

Since iCloud weeks only start on a Sunday in iCal on my iPad 1, preferences on iMac allow week to start on any day.
How can I change iPad week start on a Monday and to match iMac?

Hi,
Go to Settings>General>International, and make sure that you have the appropriate "Region Format," and "Calendar" settings.
Best wishes
John M

I have not used ipad from last 1 year and now its not starting any suggestion how to start, i have not used ipad from last 1 year and now its not starting any suggestion how to start

i have not used ipad from last 1 year and now its not starting any suggestion how to start,

Using the Supplied iPad charger, Connect it to the mains for at least 60 minutes...
Then try to turn it on.

FaceTime and iChat?..how to start chat from my iPad to a Mac on iChat?

how to start chat from my iPad to a Mac on iChat?

Yes, that is exactly what I mean.
The iPad can only do FaceTime and FaceTime is NOT linked (compatible) with iChat.
If your parents have an older Mac, or are only on Leopard, Tiger or such, you could use Skype.
It's free. The video quality isn't quite as good, but it does work. Your parents would need the Skype program installed on their Mac. You can download the free Skype for iPad.

When I started my ipad I didn't connect it to my iPhone, and now I want to. How do I connect the two so that my ipad messages will be sent to my phone if I'm not on it.

When I started my ipad I didn't connect it to my iPhone, and now I want to. How do I do this without losing everything and so that my ipad messages will be sent to my iPhone!?!

Did you read the support article that I posted above? Your iPhone number is associated with your Apple ID, so this should be doable.... Unless your iPhone is associated with a different Apple ID. Then this will not work.
From the support article... You may have to sign out on the phone as well.
Phone number missing on iPad or iPod touch
If your phone number is not listed on an iPod touch or iPad, follow these steps:
Update to the latest version of iOS.
Verify that you're using the same Apple ID that you are using on your iPhone.
On your iPad or iPod touch, sign out of your Apple ID in the following locations:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
Sign in to your Apple ID with FaceTime and iMessage.
If your phone number is still not listed, follow these steps:
Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
Sign in to your Apple ID on your iPhone.
When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and also in Settings > FaceTime.
Now sign in to your Apple ID on your other iOS devices.

Used my girlfriends computer to start my iPad for the first time I was logged into my iTunes account. Now her iTunes in the user on my iPad how do I change it to mine.

Used my girlfriends computer to start my iPad for the first time. I logged into my itunes account. Now the iPad has her iTunes account on it. How do I change it to mine.

You can log out of her account by tapping on the id on the right-hand side of Settings > Store and you can then log in with your id - is that what you want to do ?

How to do manual iPad update???

My in-laws are fully dependent on their iPad to the point that the laptop they own very rarely gets turned on. This causes a separate issue to the one raised in this post in that when I visited them last week their iPad had not been backed up and synced for around 6 months because they had not plugged it in.
WHilst visiting them I upgraded their laptop to the latest iTunes version and also made sure all their apps were up to date (usual maintenance stuff). At the time I also noticed that their iPad was still running iOS 3, so I decided to try to upgrade to the latest iOS version (4.3.5). I explained to them about the upgrade and they said that this explained why things in the "how to use your iPad" book they bought a few months ago did not work (i.e. folders, multi-tasking, cut and paste). This is when the problems started.
The laptop they own is very old and very slow. When plugging the iPad into the laptop, starting up iTunes and selecting to Upgrade the iPad, iTunes starts to download the iOS update. The download itself would take just over an hour. At the end of the download iTunes states it is processing the file. It stays in this state for several minutes, with lots of disk activity, before eventually coming up with the message that the connection with the iTunes server has timed out and aborts the upgrade.
I tried the upgrade 5 times and each time was the same result. The download completes and then I get the timeout message after several minutes of "processing the file".
I suspect that the problem is due to the laptop being so slow. It just cannot process the file quickly enough before the connection to iTunes times out.
I would like to be able to download the iOS update separately and then manually initiate it from iTunes (i.e. alt-click on Check for update button). The downloads page just says that the download is only available from iTunes. Is there any way I can manually do the upgrade? Where can I find a download link to get the update outside of iTunes?
Does anyone have suggestions on how I can update this iPad?
Thanks.

You can download the iOS manually, but you're still going to need iTunes to install it on their iPad. Here is a link that explains: http://osxdaily.com/2010/12/09/download-ios-updates-without-itunes/

How to start a local HTML5-file automatically as a weblink?

Hi, i started to learn DPS two weeks ago and had a lot of fun. But yesterday i had a problem how to start a weblink autmaticially. The checkbox in the Overlay Creator panel for activating auto-start doesn't react by clinking on it. And the default is inactive. The other checkboxes in the panel also don't react. Could this problem be a InDesign-bug? The background, what i tried to do ...i inserted a local HTML5-File as a weblinki t's shown on my iPad after synchronizing. But i have to tap on it for showing the HTML-content - but i want to start it automatically.
Thanks for your feedback. I'll hope, someone could help me.
Bye Bert

You're the man, Bob! After deleting the InDesign preferences i was able to activate the different Checkboxes. *thumbs up*
Hint: Starting InDesign with shortcut for deleting the preferences --> "shift + alt + cmd + ctrl"

How do I update iPad 2 to iOS 5?

How do I update iPad 2 to iOS 5?

Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC), and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

How to update my ipad ios to version 7

how to update my ipad os to ios7

'this fall' can mean anytime between September (only going by Sept being hte 'official' start of fall) and December (going by winter 'officially' starting in December)
Trust me, when it's released, you'll know.

How to enable my ipad air coz of wrong password and Findmy ipad air is on

How to enable my ipad air because of wrong password and i cannot recover or restore my device coz Find my ipad setting in my device is on. Itunes said this must be off before anything, but i cannot turn it off in setting because device is disable. Help me

Try DFU mode:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

HT1430 how to reset my ipad 2

how to reset my ipad to start all over

RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).
But if you want to wipe the device and start over then
Turn off imessage in settings/messages
Turn off Facetime in settings/Facetime
Delete icloud account in settings/icloud
Erase all data and settings in settings/general/reset

How to unlock a ipad mini

hi i need to know how to unlock my ipad mini

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How to start 3g ipad?

Similar Messages

Maybe you are looking for