How to start a Failed job in Source System?

Dear Experts,
I have a job running daily in the source system was cancelled at the step 10. Since it is successfull upto step 9 I would like to run the job from the step 10 onwards. The cancelled job details are given below -
Step 010 started (program XXXX, variant YYYYY, user name UUU)
ABAP/4 processor: YER_RSQL_SQL_ERROR
Job cancelled
Can any one respond to this with proper solution?
Thanks in Advance,
Raj

Dear Sam,
Thanks for your approach. Its not a single program but a set of programs listed like steps. Doing manually would be good proctice becuase I have more no. of programs from the program which is actually cancelled.
Now you can add comments to my explanation.
Thanks,

Similar Messages

Job failing in the source system.

Hi all,
I am loading data to a data store object from a R/3 system.
The job is failing in the source system with the error - ABAP/4 processor: UNCAUGHT_EXCEPTION
Can anyone help me resolving this error?
Thanks in advance.
Regards,
Deepti.

HI,
This is very generic and seems like a short dump...can you check in ST22 in the source system and see if there is any entry for ALEREMOTE check the the error log and the step where it failed??If you can analyze it and come up with the answers then people can help you here.
Also what kind of data source it is??
Was the load full or delta??
Thanks
Ajeet

Job in Source system terminated - Request is set to red

Hi
I ran a process chain on the weekend which loaded several info packages into a cube. They all ran successfully except for one.
The error message said "Job in source system terminated - Request is set to red".
I've looked on Monitor and no records were extracted.
How can I find out more information as to why this failed ?
Sandra
thanks in advance

Hi sandra,
Suppose if the job in the source system is terminated then no extraction is possible.In order to see the job in the source system->in the process monitor tab->go to environment menu-->job overview>in the source system.so by following the above steps u can see the job in active r cancelled like that.by clicking on the job log u can see all the steps involved in that job.based on that u can take action.
what my suggestion to this issue is force the qmstatus to red and delete that incorrect request and perform again repeat.it will goes through successfully unless it is not a functional error.
assign points if it is useful...
regards,
sri

How to create Web Service as a source system in BI and configure a DS

Hello,
I was wondering if you can give me the links to information where it is explained how to create Web Service as a source system in BI 7 NW 2004s and also how to create a data source that would read data from that Web Service?
Thanks,
AG

Hi AG.
Please check the following documentation which talk about this questions.
[Creating Web Service Source System|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
[Creating DataSources for WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/43/ec90a315434c5de10000000a155369/frameset.htm]
[Transfering Data Using WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
I hope that I can be helpful.
Thanks,
Walter Oliveira.

How To create a new R/3 source System ?

Hello,
Can somebody guide me to a white paper or something related which explains in detail how to create a new R/3 source System in BW?

hi jay,
while i don't have a white paper, it was as simple as right-clicking the source systems tree in AWB and creating a new one - the process is simplified if you're using release 3.0E up, but i can't help you much if not. but you basically have to create an RFC connection to the source system, create a BW user, assign the IDOCs properly (this one i don't know how to do), and linking them all up together in one source system.
if i come across any notes, i'd be more than happy to help.
i'll try asking our Basis people too, just in case they know of anything i could point you at.
ryan.

Job in source system terminated

hi xperts,
     I am getting following error while loading from 2LIS_03_BX to 0IC_C03 CUBE.
i already put the GENERATE INITIAL STATUS.
<b>"Job in source system terminated --> Request is set to red."</b>
In the details TAB:
a)Requests (messages): Everything OK
   Data request arranged
Confirmed with: OK
b)Extraction (messages): Errors occurred
   Data request received
   Data selection scheduled
   Error occurred in the data selection
c)Transfer (IDocs and TRFC): Everything OK
Request IDoc : Application document posted
Info IDoc 2 : Application document posted
Info IDoc 1 : Application document posted
d)Processing (data packet): No data
Please help me,its really urgent.
Thanks in advance.

Hi,
     if you can not find any reason in sm21, st22, rsa3. then try as below:
    1. replicate the datasource;
    2. activate transfer rule;
    3. quit workbench
    4. entry workbench
    5. create a new data package
    6. load data with the new data package again;
hope you good luck;

Bw extraction process starting after a process/job in source system

Hello gurus,
I want to start a extraction process (a chain process) in BW system after a background program (job background process) has finished in the source system (which is an R/3 system).
My solution sound like this: I make a RFC function in BW that start the event XX, and planning the process chain to start at event XX (all this in BW side).
In source system I call the RFC function when the desired background process has finish.
I look for another solution (more simple maybe) for my task, or for any another suggestion.
thanks

Hi,
Refer the note :135637
(1) Create an event in the BW system
Define a system event (for example SAP_BW_TRIGGER) with Transaction SM62.
(2) Create a function module in the BW system
Create a function module (for example Z_BW_EVENT_RAISE) with the help of Transaction SE37. For the source code refer to the attachment of this note.
(3) Use the below code in code of the triggered job in the R/3 System.Here BIMCLNT000 is the logical system name of the BI system. you need to cange it to yours.
parameters: rfcdest like rfcdisplay-rfcdest default 'BIMCLNT000'.
call function 'Z_BW_EVENT_RAISE'
destination rfcdest
exporting
eventid = 'SAP_BW_TRIGGER'.
Regards,
Anil Kumar Sharma .P

Unable to kill or cancel the job in source system

Hi gurus,
   got a error , while loading delta for line item ods in AR.
stating as the job is not ended in the source system.'
i find the job in the source system and it is active.
   i tried to kill that job from sm37, its not happening,
and tried to cancel from sm50 even its not happening.
kindly suggest how to cancel or kill that job.
its urgent plz.
pramod

Hi,
        Check If u r system is running on more than 1 server...kill your job with proper appropriate server in tcode SM51.And also after killing the job come to SM37 check that particular job, nd on top menubar,u will 'check job status'.Then do refresh.
Hope this helpful to you.
Regards,
Praveena.

SIL_PositionDimension Fail on second source system

Hi all,
We have config our BI APPS 795 With two source system, both are EBS 11.5.10.
Subject Area "Financials - Receivables" from the first source sytem are successfully completed in execution plan.
The DATASOURCE_NUM_ID for the first data source system is 4.
And then task "SIL_PositionDimension" Failed on running execution plan for Subject Area "Financials - Payables " from second EBS source system.
From Informatica session log, error shows
WRITER_1_*_1> WRT_8229 Database errors occurred:
ORA-00001: unique constraint (DW.W_POSITION_D_U1) violated
Database driver error...
Function Name : Execute
SQL Stmt : INSERT INTO W_POSITION_D(ROW_WID,EMP_ID,PAR_INTEGRATION_ID,POSITION_NAME,DIVN_NAME,EMP_LAST_NAME,EMP_FST_NAME,EMP_LOGIN,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,TENANT_ID,X_CUSTOM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_POSITION_D(ROW_WID,EMP_ID,PAR_INTEGRATION_ID,POSITION_NAME,DIVN_NAME,EMP_LAST_NAME,EMP_FST_NAME,EMP_LOGIN,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,TENANT_ID,X_CUSTOM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> CMN_1761 Timestamp Event: [Thu Oct 29 17:15:52 2009]
WRITER_1_*_1> WRT_8425 ERROR: Writer execution failed.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Thu Oct 29 17:15:52 2009]
WRITER_1_*_1> WRT_8114
Row # [1] in bad file
WRITER_1_*_1> CMN_1053 : Rowdata: ( RowType=0(insert) Src Rowid=2525 Targ Rowid=2525
ROW_WID (ROW_WID:Double:): "51525.00000000000"
EMP_ID (EMP_ID:UniChar.15:): "6272"
PAR_INTEGRATION_ID (PAR_INTEGRATION_ID:UniChar.30:): "PER~"
POSITION_NAME (POSITION_NAME:UniChar.50:): "KR Manager.."
DIVN_NAME (DIVN_NAME:UniChar.100:): "KR Human Resources"
EMP_LAST_NAME (EMP_LAST_NAME:UniChar.50:): "Kang"
EMP_FST_NAME (EMP_FST_NAME:UniChar.50:): "Lana"
EMP_LOGIN (EMP_LOGIN:UniChar.50:): "Unspecified"
CREATED_BY_WID (CREATED_BY_WID:Double:): "13497.00000000000"
CHANGED_BY_WID (CHANGED_BY_WID:Double:): "13497.00000000000"
CREATED_ON_DT (CREATED_ON_DT:Date:): "02/05/2002 17:56:34"
CHANGED_ON_DT (CHANGED_ON_DT:Date:): "02/06/2002 17:44:53"
AUX1_CHANGED_ON_DT (AUX1_CHANGED_ON_DT:Date:): "03/13/2002 21:38:44"
AUX2_CHANGED_ON_DT (AUX2_CHANGED_ON_DT:Date:): "10/19/2003 23:32:57"
AUX3_CHANGED_ON_DT (AUX3_CHANGED_ON_DT:Date:): "10/16/2003 19:42:50"
AUX4_CHANGED_ON_DT (AUX4_CHANGED_ON_DT:Date:): "(NULL)"
SRC_EFF_FROM_DT (SRC_EFF_FROM_DT:Date:): "01/04/1991 00:00:00"
SRC_EFF_TO_DT (SRC_EFF_TO_DT:Date:): "12/31/1993 00:00:00"
EFFECTIVE_FROM_DT (EFFECTIVE_FROM_DT:Date:): "01/04/1991 00:00:00"
EFFECTIVE_TO_DT (EFFECTIVE_TO_DT:Date:): "12/31/1993 00:00:00"
DELETE_FLG (DELETE_FLG:UniChar.1:): "N"
CURRENT_FLG (CURRENT_FLG:UniChar.1:): "Y"
W_INSERT_DT (W_INSERT_DT:Date:): "10/29/2009 17:15:50"
W_UPDATE_DT (W_UPDATE_DT:Date:): "10/29/2009 17:15:50"
DATASOURCE_NUM_ID (DATASOURCE_NUM_ID:Double:): "41.00000000000000"
ETL_PROC_WID (ETL_PROC_WID:Double:): "20947710.00000000"
INTEGRATION_ID (INTEGRATION_ID:UniChar.30:): "PER~6272"
TENANT_ID (TENANT_ID:UniChar.80:): "DEFAULT"
X_CUSTOM (X_CUSTOM:UniChar.10:): "(NULL)"
But this is the first time we load data from the second EBS which the DATASOURCE_NUM_ID = 41 .
So there is no data with DATASOURCE_NUM_ID (41) existing in table W_POSITION_D.
Don't know why failed on "ORA-00001: unique constraint (DW.W_POSITION_D_U1) violated".
Unique constrait on DW.W_POSITION_D_U1 are three columns EFFECTIVE_FROM_DT, DATASOURCE_NUM_ID, AND INTEGRATION_ID.
Really appreciate the help,
Roger

Hi
We were also stuck up with similar kind of issue on w_position_d table,
we are not sure on how to go about with this Unique constraint on index creation.
refer the link OBIA 7.9.5 "Financial Analytics" Full load fails
let us know if you have any inputs on this.
thanks
saran

How to merge key field from external source system with SAP R/3 master

Hi,
In SAP BW 7.0 system, our scenario is Master Data for 0GL_ACCOUNT is coming from SAP R/3 alongwith the Transactional data records for standard FI cubes. Then, one more set of transaction data is coming from external source system, a flat file, into another custom DSO(ZDSO_FI), which also has this GL Account field.
This flat file's GL account, GL_file, has to be basically mapped/merged with the standard 0GL_ACCOUNT field so that at the time of loading the transactional data for custom DSO, ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), system automatically refers to the 0GL_ACCOUNT master data to load these incoming transactional values, from the external flat file system. How can this be done?
To illustrate the scenario, say I have 5 records in 0GL_ACCOUNT, loaded from SAP R/3 into SAP BW-
0GL_ACCOUNT      Short Description     Source System
100                                   D1                          R/3
200                                   D2                          R/3
300                                   D3                          R/3
400                                   D4                          R/3
500                                   D5                          R/3
Now suppose if my flat file has following sample transactional data, to be uploaded in SAP BW ZDSO_FI-
GL_file      Key Figure1
400          789
200          567
Then after uploading this transactional data in ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), the 0GL_ACCOUNT data becomes as below-
0GL_ACCOUNT      Short Description     Source System
400
200
100                                   D1                          R/3
200                                   D2                          R/3
300                                   D3                          R/3
400                                   D4                          R/3
500                                   D5                          R/3
So note that the system did not refer the incoming GL's from flat file, although the field is mapped to 0GL_ACCOUNT in transformation, to the already available master data. Rather created 2 new data rows for the GL accounts coming from external system. Because of this I am not able to perform the calculations common from standard FI cube and ZDSO_FI, with GL account as key field. I need to synchronise these data values based on GL Account to proceed with further calculation and am badly stuck.
Request if anyone can please throw some light on how to achieve this seemingly simple requirement?
Thanks in advance.
Nirmit

Better post this thread is in the [Enterprise Data Warehousing|Data Warehousing; forum.

Transport Request got failed due to Source system does not Exist

Dear All,
I Have collected All data soruces which are related to R3 data sources and Flat File data sources...
After import the transport request it got failed due to Flata file source system does not exist in BI quality system.
But all data sources related to R3 and R3 Source system has been moved which are available in BI Quality sytem also.
why Flat File source and data source are moving.. why i am not sure it was throuing error message called Source System does not exist..
Thanks,
Ven

Dear Venkat ,
Go to Quality system .
Use RSA1 Transaction --> go to Tools --> Manage Source System :
Here you can map the entry of system ..
Second : go to Development system under RSA1> Transport Connection and click on Source system button first --> select your source system ---you can select multiple entry also ..collect your data source ( with before and after option ) and deselect which object you do not need ..And select collection mode to automatically ...
use the transport button to create transport request and release from development system .
I hope you will not get error in Q system .
If still facing error , Please let me know.
Regards
Vikas Sharma
Robert Bosch
Edited by: Vikas Sharma-Bosch on May 5, 2011 5:34 PM

How to start a BPM process from ERP system

Hi,
I created a process in Netweaver Developer Studio with the Process Composer in SAP CE 7.1 BPM, now I want to automatically start the process by saving a SAP document like purchase requisition or purchase order. Therefore I think about implementing a UserExit / Badi or something else.
The following systems are available in my Landascape:
- PI 7.1
- ERP 2005
- CE 7.1 EHP1 with ESR
Does someone have an idea how to start the BPM Process or how to trigger start event?
Greetings,
Christian

the process by saving a SAP document like purchase requisition or purchase order.
Based on your business process, you will have to decide what data should be sent to other system. It could be in the form of Idoc trigger or an RFC calls. If there are non-SAP systems involved, you should be using PI 7.1 too. In that case, you can communicate using Abap proxy call too. For this you may either call an RFC internally in a report and schedule it.
Regards,
Prateek

How to load master data from 2 source system without using 0logsys as compo

Hi Gurus,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
So, please help me out providing logic.
thanks in advance
Peter.

Hi Peter,
Can you brief me how did you resolved your issue?
Regards
Utpal

How data extraction influence other processes in source system?

hi,
does data extraction influence other functions of source system (e.g. some background jobs can not be executed due to tables lock)?
Regards,
Andrzej

Hi andrzej,
The extraction process will not have much impact on the source system's other processes. But if u have got lots of data , it might have some effect while transferring the IDOCS. but as such, there should not be a problem of not data getting extracted. Is there any particular problem which ur phasing?
Rewgards
Sriram

How to start a long running program at system start and stop at login and restart at logoff

I am trying to mine some crypto currency with my computer. My computer is usually in logged off state, so I want to mine automatically when system is in this state.
Untill now I have done this:
At system start, I have scheduled a task to start the mining software
at login I have scheduled another task to kill the mining process
Here comes the question: I need to restart the mining process as soon as the user logs off.
But I couldnt figure out how to schedule a task at logoff, so I decided to use Group Policy Ediotr's Logoff scripts. But the problem is, I can't seem to log off at all, because system seems to be waiting for the "script" to finish, and since it is
a mining process, it doesn't finish, and the user is never logged off!
How do I configure windows to resume mining after the logoff?

Hi!
I haven't been working much with mining, but you are thinking correctly with using the logon/logoff-scripts.
The problem is that the process for mining requires a user to be logged on, it runs i user-context.
So if you in some way can start the process to run in system context, you are good to go. (The mining process) But if this is possible at all I do not know, I think the miners are dependent on a user being logged on.
Best regards
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

How to start a Failed job in Source System?

Similar Messages

Maybe you are looking for