How to start a new career in SAP - SD as a Fresher?

Dear All,
I am on the way to enter in the new world - SAP as a fresher.
Seems to be positive and hopes on own capabilities.
Willing to learn and go for Sales & Distribution (SD) Module as per my experience and domain knowledge.
Please input your expert comments and opinion as per your master knowledge.
How to start Online Training for 3 months?
How much time to give Theoretical and Practical knowledge?
Where & Which department need some personal attention
How to go for Certification and prior practices?
How to crack the Interview?
How to find placement for SD on our own shoulder?
Is there any opportunity for fresher at abroad? Where?
As fresher what would be the CTC?
Dear All,
Waiting for your expert comments..
Thanks & Regards,
Tulsidas Ankam

Hi,
Here's an SCN tip for you: if you post multiple questions on the same topic and get detailed answers, then you should mark the questions answered and award some points (where merited).
Otherwise - eventually - no one will respond!
Anyway, onto your question. I personally think the best avenue of attack is to:
- join an organization that is already running SAP, even if it is in some junior position
- make it clear that you are very interested in SAP SD and are willing to do all the training etc yourself
- grab every opportunity you can to learn SAP SD on-the-job
There is little point getting certified if you have no experience. I don't think it improves your chances of getting a job (and it can be quite expensive).
Anyway, just my opinion! Good luck.
cheers
Paul

Similar Messages

How to Start with new Iphone 4 Factory Unlock ???

I am getting new factory unlock Iphone 4 day after tommorow and I currently have Jailbreak Iphone 3G...Plz tell what should i do to get started ??? I dont want to to jailbreak iphone 4 right now as the un-teathered jb is not available..So how to start ...Any advice plz...

When you get your new phone, connect it to iTunes to activate. Do not restore from the backup of your jailbroken phone when given the option of setting up as new or restoring from backup. Select setup as a "new" phone. You must also have an activated sim in the phone.

How to start a new line in BBM Blackberry Z 10?

I'm wondering how can i press (enter) to start a new line when a BBMing in my Blackberry Z10? the same when I want to type a new Text Message!!
As when I press enter it send the message, and what i want is to add a new line to start a new sentence before sending it !!!
http://forums.crackberry.com/blackberry-z10-f254/how-start-new-line-bbm-blackberry-z-10-a-769097/

You can't currently do this in BBM or SMS. Maybe this will be added in a future update.
As a workaround, you could type what you need in Docs To Go, and then copy and paste it into BBM or SMS.
Rad Systems apps on BlackBerry World
Follow on Twitter, Facebook or BBM Channel: C0006BB16
Tips to improve your BlackBerry 10 battery life (and avoid overheating)

How to use a new class in SAP XI

Hi @,
I have created one new class for the purpose of exception and error handling .I dont know as to where and how i should use this class within SAP XI .How can i include this class so that the effect can be viewed during runtime
Regards

Hi,
In general we will create the package and import under archieves and create USDF in mapping there , you can mention as undr import that package , in code , in UDF , you can use package.class
see the below link for more details
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Regards
Chilla
<i>reward points if it is useful..</i>

I did one spreadsheet and figure out how to start a new one

Start a new spreadsheet on ipad

Are you asking how to create a new spreadsheet using Numbers? On an iOS device, tap Spreadsheets, then tap the "+" sign.
For Numbers on a Mac, see http://help.apple.com/numbers/mac/3.1/#/tan753033f43.
For Numbers on an iOS device, see http://help.apple.com/numbers/ipad/1.7/#tan7271aff3.

How do i add new font to sap(smartform)

hi, all!
now, i have one thing to be solved!
i'm using smartforms for developing form program.
i can't find what i want to use new font in sap.
so i added new font to sap using se73 t-code. but some are missing, for example i can't use bold...
so, if anybody have these experience... tell me how to...
best regards,
gy cho.

hi,
For SE73, on screen
There is a button 'True Type-Font Importian'.
On pressing this button you will go to next screen.
Give unique name of font and .ttf file of your computer.
If you select Bold or Italic, select different font file respectivly.
and Execute.
Fonts are centralized for SAP.
if you are not authorized to do cross-client activity, it will not allow you.
Usually Basis Team does this for developers.

How to Start a News Letter

Hi, I'm looking to start a news letter on my site. I have the
email addresses of the users that want to receive the news letters
however, I need to figure out how to program a page that would send
the same email to all the email addresses saved in my database.
Thanks in advance for all the help.

As always, there are several solutions to the problem. A
simple one is:
1. Create a table with the newsletter texts (so that the
users can add new newsletters and send them out)
2. Make a query with the users to receive the newsletter
3. Make a query with the text you want to send out
4. Use CFMAIL with a query attribute to loop through the
query with the users
5. Within the body of the CFMAIL tag display the content of
the newsletter text to be added to the email
I'm sure there other and better practices out there - but
that's one that will work well for a smaller scale project. Don't
forget error catching as cfmail will fail if the email address is
in an invalid format (i.e. thisHasA [email protected]).

How to start a new process in BPM

There are many ways to start a new process in BPM.However I was wondering whether there is any specific way to kick off an instance in the process with the help of PAPI from external systems.I would be thankful if someone could advise.

Check the PAPI Javadoc & Samples in the [enterprise_install_dir]/client/papi/ directory.
Basically, you must:
a) create a Process Service object
service = ProcessService.create(properties);
b) create a PAPI session with a participant
session = service.createSession(user, pass, "localhost");
c) create an instance:
instance = session.createProcessInstance("/Orders", "BeginIn", arguments);
d) destroy the session
session.close();
Hope this helps!
Fernando

How to start for a career change to NetWeaver

Hi,
I have around 5 years of Java and a couple of years of .Net experience . I want to enter into SAP world , i have no idea about anything in SAP . but i heard, to learn Netweaver one should have good exp in Java/.Net.
Please advise me how do i start to move onto SAP? clear approach.I am good in learning new things in less time and have lots of enthusiasm and patiance to learn new things.I would appreciate your help and reward points for your suggestions.
Thanks,
Geetha

Hi Geetha,
Have a look at the following links:
New to Netweaver
/thread/122598 [original link is broken]
what's the relationship between NetWeaver and R/3 ??
/thread/352079 [original link is broken]
All these threads will give you a good insight as to what all you have in front of you when we talk about Netweaver....
Bye
Ankur
Do reward points for helpful answers!!

ABAP PROXY - how to load a new field into SAP SNC system

I am also curious about the proxy process. Please let me know if you know of a post that has mentioned this before.
We have to customize our Delivery Schedule Notification proxy. I already regenerated the standard one into a Z proxy name. I already put in my custom code to load Z fields into a Z table.
Here is my new problem. The users wants more additional fields.
Here is the standard proxy generated layout for this structure:
/SCA/BIF_S_DELIVERY_SCHEDULE
CONTROLLER
ID
TYPE_CODE
CREATION_DATE_TIME
BUYER_PARTY
VENDOR_PARTY
BILL_TO_PARTY
NOTE
ITEM
Here is the new proxy generated layout for this structure:
ZDELIVERY_SCHEDULE_NOTIFICATIO
CONTROLLER
ID
TYPE_CODE
CREATION_DATE_TIME
BUYER_PARTY
VENDOR_PARTY
SUPPLYING_VENDOR
BILL_TO_PARTY
NOTE
ITEM
Notice that SUPPLYING_VENDOR is the new field. VENDOR_PARTY is already loaded into the system. How can I get SUPPLYING_VENDOR loaded into the database?
Thank you in advance for your assistance.
Edited by: DAVID CRAIG on Jul 29, 2009 2:16 PM

Hello.
Thank you for the information. I need to clarify my situation.
I understand there is a PROVIDER CLASS. Within that PROVIDER CLASS there is a METHOD. Inside that METHOD there is a place for me to put my code in. I have already done that work for a previous requirement. I moved Z fields to a Z table.
My new requirement has a field SUPPYING_VENDOR that was inserted into one of the SAP structures. It was placed next to VENDOR_PARTY.
Here are my steps of execution:
1. Go to transaction /N/SCA/ICH_S (SNC Supplier View)
2. Click on RELEASE
3. Click on RELEASE OVERVIEW
4. Click on GO
5. Click on DETAILS
6. Click on the SHIP-FROM LOCATION tab
The SHIP-FROM LOCATION field is currently being populated by the VENDOR_PARTY field from the proxy. This is done automatically by SAP.
1. How do I find the table and field name for that field? This is in the Supply Network Collaboration screen, not normal SAP transaction.
2. How do I get that SUPPLYING_VENDOR data to populate SHIP-FROM LOCATION instead of VENDOR_PARTY?

How to start building new screens in ORPOS 13.0.2

Hi All,
I am very new to ORPOS UI implementation/customization.
I am in process of customization/ changing the UI for POS Client.
Read the Operation Guide and it is very useful to start with.
But I am facing difficulties in setting my Eclipse to run the application :(
Following are the steps performed by me: -
1. Downloaded the source code
2. Loaded all the directories from the source code in Eclipse
3. Compiled the source. Got 1000's of errors.
4. Added the jars in the same order as mentioned in the operation guide.
5. Still the same. Not able to proceed further.
Someone please help me on how to set up my Eclipse to run the ORPOS Client application.
What are all the directories to be loaded in the Eclipse for UI development and running the application(TierLoader class) ?
Please provide me your expert advice and help me in getting started with ORPOS development.
Thanks for your help.
Best regards,
Amaresh

Hi Amaresh,
A little late reply...
You maybe might benefit from metalink/oraclesupport document "Where Can I Find Developer,User And Administrator Guides For Central Office Version 2.0.0 [ID 399052.1]".
Best regards, Erik

Xsl question: how to start a new table if recordnumber exceeds 22

Hi.
I was hoping someone could help me with this problem...
I got a simple table where I receive 4 variables from the xsql
query:PNS (nom. size), POD (dia.(mm)), PWTH (Wall th.(mm)) and
PSCH (Schedule). The result is presented on a web-page, but
because we also want to print it out, we are not able to present
more than 22 records in each table. How do I tell the XSL to
start printing a new table when it has reached 22 records?
Example of XML:
<ROWSET>
<ROW>
<PNS></PNS>
<POD></POD>
<PWTH></PWTH>
<PSCH><PSCH>
</ROW>
<ROW>
<PNS></PNS>
<POD></POD>
<PWTH></PWTH>
<PSCH><PSCH>
</ROW>
</ROWSET>
Example of XSL:
<table class="no" style="width:170mm;padding:1pt;"
cellspacing="0" border="1">
<tr>
<td class="b">Nom. Size(in)</td>
<xsl:for-each select="WALLTHICKNESS/WALLTHICKNESS_ROW">
<td class="lb"><xsl:value-of select="PNS"/></td>
</xsl:for-each>
</tr>
<tr>
<td class="t">dia.(mm)</td>
<xsl:for-each select="WALLTHICKNESS/WALLTHICKNESS_ROW">
<td class="lt"><xsl:value-of select="POD"/></td>
</xsl:for-each>
</tr>
<tr>
<td class="t">Wall th.(mm)</td>
<xsl:for-each select="WALLTHICKNESS/WALLTHICKNESS_ROW">
<td class="lt"><xsl:value-of select="PWTH"/></td>
</xsl:for-each>
</tr>
<tr>
<td class="t">Schedule</td>
<xsl:for-each select="WALLTHICKNESS/WALLTHICKNESS_ROW">
<td class="lt"><xsl:value-of select="PSCH"/> </td>
</xsl:for-each>
</tr>
</table>
Regards,
Terje K.

DOMParser parser=new DOMParser();
XMLDocument xmlDocument=parser.getdocument();
Node node=xmlDocument.selectSingleNode("/ROWSET/ROW");
Element element=xmlDocument.createElement(String tagName)
node.appendChild(element);

How to start a new project in SDK

Hi, I'm totally new in SDK and I need to make a project, plugin, on the Uni. Could somebody explain me please how to install the SDK? I downloaded the SDK, but there is now exe file, so I suppose I need to add these libraries to the new project in Visual Studio. I really have no idea how to do that, so let me beg you for your help. Can it be Visual Studio 2013, is newer than 2010 also ok? Pls help

Hi! As long as I know, you cannot install SDK. The best thing to do is to explore sample projects - and then modify them for your own purpose.
This introductory article is probably best start
http://www.mactech.com/articles/mactech/Vol.15/15.04/PhotoshopPlug-InsPart1/index.html
It is from 1999., some things changed, but the principle stayed same.
Also, sample projects contain a lot of comments, so the code can be comprehended relatively easily.
Best!

Comp. hard drive crash-How to start using new comp. w/o losing ipod data

I had a hard drive crash on my old laptop. Unfortunately, I didn't have any backup of any of my iPod data. I had purchased 2 videos and 3 songs. Not a huge loss there, but I also had imported about 150 CDs that I don't care to burn again.
Ideally, I'd like to get my new laptop loaded with all the data from my iPod, but I've heard I can't do that. At a minimum, I'd like to get my iPod synching with my iTunes library on the new laptop without losing all the data I've already placed on it.
Each time I try and switch back to automatic, it tells me that it will replace all the data on my laptop.
Any advice on how to proceed, and any way to get the data back on my laptop's iTunes library from my iPod?
5th gen iPod using iTunes 6.0.1.3 on Windows 2000
Thanks.

Gordon,
There's a solution to your problem but first it's time for a little lecture. (If it makes you feel any better, I don't like this any more than you do.)
I hope you take this as an opportunity to learn a very important lesson: Back up your iTunes library as soon as you can after resolving this situation because right now you are only one glitch of your iPod away from losing your music entirely.
Many people come to the Discussions having lost their music in just such situations and, believe me, it's not a happy time for anyone.
If you place any importance on your playlists and the data they depend on, you will want to include your iTunes Library files in your back-up regimen as well.
Anyways, that's the lecture. The answer to your problem should be found in this post:
http://discussions.apple.com/message.jspa?messageID=797432#797432
Good Luck! But once your music is back on your computer, remember:
Your music is valuable - please back it up!

How to start a new line in a text field?

I tried the following formula to break for a new line but it is not working.
stringvar notes;
stringvar newline;
newline := chr(100);
replace (notes := {HNO_NOTE_TEXT.NOTE_TEXT}, "\r\n", newline);
Any suggestions?

How could I accomplish the following.?
Current data in the column.
PREOPERATIVE DIAGNOSES: 1. Right shoulder rotator cuff tear. 2. Right shoulder biceps tendon disease with superior labral tearing. POSTOPERATIVE DIAGNOSES: 1. Right shoulder rotator cuff tear. 2. Right shoulder biceps tendon disease with superior labral tearing. SURGEON: Jane, Doe, MD ASSISTANT: Jane, Doe, PA-C and Bob, Doe MD, orthopedic resident. The assistance of a physician's assistant was required for limb positioning and placement of anchors. ANESTHETIC: Interscalene block plus general. DRAINS: None. COUNTS: Sponge and needle count were correct. MATERIAL FORWARDED TO THE LABORATORY: None. OPERATION PERFORMED: 1. Right shoulder arthroscopic rotator cuff tear. 2. Right shoulder open subpectoral biceps tenodesis. 3. Right shoulder subacromial decompression with acromioplasty. 4. Right shoulder extensive glenohumeral debridement.
I would like the following in MS Excel. I would like to pull the header out into a separate column.
Header
NOTE_TEXT
PREOPERATIVE DIAGNOSES:
1. Right shoulder rotator cuff tear. 2. Right shoulder biceps tendon disease with superior labral tearing.
POSTOPERATIVE DIAGNOSES:
1. Right shoulder rotator cuff tear. 2. Right shoulder biceps tendon disease with superior labral tearing.

How to start a new career in SAP - SD as a Fresher?

Similar Messages

Maybe you are looking for