How to start a program with Admin rights without UAC dialog?

I want to run a program with the user's admin rights,but i don't want windows pop up the UAC dialog.How can i do that?tks.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

How to start bluetooth programming with c# in visual studio?

i am currently in final year , thought of doing project on bluetooth but dont know how to go about.

Hi saieesh1638,
Based on your issue, I did some research about your issue. I find a MSDN blog about the Bluetooth with c# issue, maybe you will be get some useful message.
Reference:
http://blogs.msdn.com/b/codejunkie/archive/2008/09/13/bluetooth-device-control-development-using-c.aspx
In addition, since this forum is discuss the VS IDE issue, if you have any issue about the Bluetooth with c#, I suggest you can post the issue directly to C# forum:https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral,
maybe you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to define and work with bind-variables without the dialog-box ?

I want to select different tables with the same bind_variables,
but do want not fill the bind-variables-dialogbox
everytime I use the select statements
because I could simple edit and bind this bind-variables once
at the first select.
select col1, col2 into :bind1, :bind2 from mybasictable_10 where col3 = 'ABCD':
select * from mytable_b where b1 = :bind1 and b2 = :bind2 ;
select * from mytable_c where c1 = :bind1 and c2 = :bind2 ;
select * from mytable_d where d1 = :bind1 and d2 = :bind2 ;
select * from mytable_e where e1 = :bind1 and e2 = :bind2 ;
it doesn't work and I didn't find that in help,
how does it work in sql-developer ?
regards

david,
back to the root of my question:
I do use an 10 years old low-end sql / plsql-tool where I can simple and fast do sql-things like that:
select col1, col2 into :bind1, :bind2 from mybasictable_10 where col3 = 'for_example_ABCD':
select * from mytable_b where b1 = :bind1 and b2 = :bind2 ;
select * from mytable_c where c1 = :bind1 and c2 = :bind2 ;
select * from mytable_d where d1 = :bind1 and d2 = :bind2 ;
select * from mytable_e where e1 = :bind1 and e2 = :bind2 ;
I would like to use oracles SQL-Developer instead of this 'old' tool,
and want to use my 'old' sql / plsql scripts
but the SQL-Developer in this matter seems is to much complicate to use,
I can do complex and big things with sql-dev,
but not simple using bind-variables ;-)( .

Install SCCM client remotely with admin rights

Hi,
I want to deploy SCCM 2012 R2 clients remotely via PowerShell script running on an admin computer with the following commands :
$Computers = Get-Content C:\Computers.txt
$Computers | % { Copy-Item -Path C:\Temp\ccmsetup.exe -Destination \\$_\C$\RemoteTemp\ }
Invoke-Command -ComputerName $Computers -ScriptBlock {\\$_\C$\RemoteTemp\ccmsetup.exe /mp:MP01}
When I run the PS script, the client is not installed on remote computers. When I run the ccmsetup via command line locally, there is a popup displaying if I want to allow the EXE execution. When I click on YES, the client is well installed. So I want to
know if there is a solution to do it from my PS script with admin right bypassing UAC on remote computers ?
Thanks.

If that's really the road you want to take then this will probably help:
http://jeffwouters.nl/index.php/2011/11/having-some-fun-with-uac-and-powershell/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to start a application with a login window?

hi there
does anyone have any idea on how to start an application with a login window? a login window is the first frame or window to be displayed when an application starts running. and only correct login id and password have been entered the real application will start. any sample out there? thank you.

You can start a new thread by making a thread object and passing it an implementation of a runnable object. Runnable has just one method, public void run(), this is was gets executed in a second thread. perhaps the code you would use would look something like this.
<code>
// set up thread for login window
new Thread(new Runnable() {
public void run() {
// construct your login window here
// when you are done processing the
// password....
if(goodPassword) {
authorized = true; // a global variable
notifyAll(); // don't forget this
else {
System.exit(42);
}).start();
// control does not stop this code gets executed while
// the above thread is running.
// Set up main program here. This is done in the
// backround.
while(!authorized) {
synchronized(this)
{ wait(50); }
// now when the user logs in this frame pops
// up real quick.
myFrame.setVisible(true);
</code>
Hope you can figure it out.. good luck :)

Really stuck on how to start this program

Okay, I know I should be posting some code here and showing where I've started and such, but I'm pretty lost as to how to start this program. Here's the problem:
2. Making Change:
This application, named ChangeMaker, will take as input a product price and an amount paid,
both floating-point numbers representing euro and cent amounts. The application computes and prints the amount of change due the user, and also expresses the change amount in number of 2-euros, 1-euro, 20-cent, 10-cent, 5-cent, 2-cent, and1-cent coins.
(Assume no change is given in bills, only in coins.)
For example:
Enter product price: 2.32
Enter amount paid: 5.00
Your change is 2.68 euros
1 x 2 euro
3 x 20-cent
1 x 5 cent
1 x 2 cent
1 x 1 cent
You can assume that the amount paid is greater than the product price, and that both inputs are
"euro and cent" amounts: positive numbers with at most two decimal places.3
Now, I know how to print the line asking for product price and enter amount paid, but I cannot figure out how to set up the rest of the code when switching from american USD dollars/coins to euros. I looked up the conversions and they are just intimidating as all get out when trying to take the equivalency of euros to each dollar thats entered and then taking the rest of the USD remainders and represent that in USD coinage. >.< Help is much appreciated thank you.

thomas.behr wrote:
random0munky wrote:
... when switching from american USD dollars/coins to euros. I looked up the conversions and they are just intimidating as all get out when trying to take the equivalency of euros to each dollar thats entered and then taking the rest of the USD remainders and represent that in USD coinage.Uhm, your requirement doesn't say anything about converting between USD and EUR. For starters, just write the program without any currency information at all. (That is only flavour anyways.)
For example:
Enter product price: 2.32
Enter amount paid: 5.00
Your change is 2.68
1 x 2
3 x 0.2
1 x 0.05
1 x 0.02
1 x 0.01That deception would never fly in a Red State -- 20 cent piece? 2 cent piece? 2 dollar coin? All this smacks of Socialism!

How to start java applet with netbeans 6.1

hey,
I want to learn how to start java applet (with database) with netbeans.. I'm new to java...can you show me how can i start..if you have any doc about it can you send it to me..thank you..:)

You really should be asking this NetBeans question at the NB site - these forums are for Java language topics, not NB support.
[http://www.netbeans.org/kb/61/web/applets.html]
Almost any NB question you have can be answered by either the NB web documentation or the NB program's Help.

Restrict Standard User from not removing the COM-Addins registered under HKLM with Admin rights.

Hello,
I have developed a COM-Addin for word 2013 by VS 2013 and installed it under the HKLM with Admin rights. Now from an non-admin account, ie Standard User I'm able to uncheck that addin from the COM-Addins dialog and remove it also. Previously I have done the
same thing for word 2007 addins and if a non-admin user tries to uncheck it the warning "The
connected state of Office Add-ins registered in HKEY_LOCAL_MACHINE cannot be changed" pops
up. But this is not happening for office 2013 apps(basically word, excel and powerpoint).
This is happening for all Add-Ins installed under HKLM.
How can a Standard User be restricted from unchecking and removing the Office Addins registered under HKEY_LOCAL_MACHINE with same warning "The
connected state of Office Add-ins registered in HKEY_LOCAL_MACHINE cannot be changed" in
a pop-up box?
Regards, Sayan

Hi,
The behavior is changed since Office 2010. Office 2010 and Office 2013 allows a standard user to turn a per-machine add-in off by unchecking the add-in in the COM Add-ins dialog.
To restrict Standard User from not removing the COM Add-ins, we can try to add the add-in to
the Group Policy option: List of managed add-ins in the Office Group Policy template.
Word for example, the policy is under:
User Configuration\Administrative Templates\Microsoft Word 2013\Miscellaneous
To enable this policy setting, provide the following information for each add-in:
In "Value name", specify the programmatic identifier (ProgID) for COM add-ins, or specify the file name of Word add-ins.
To obtain the ProgID for an add-in, use Registry Editor on the client computer where the add-in is installed to locate key names under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Word\Addins.
To obtain the file name of an add-in, click the File menu in the application where the add-in is installed. Click Options, click Add-ins, and then use the Location column to determine the file name of the add-in.
In "Value," specify the value as follows:
To specify that an add-in is always enabled, type 1.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Additional User with admin rights

Hi all,
i checked the documentation but i could not found a possibility to create an additional user with admin rights to access the Vibe Management Console.
Does anybody know if this is possible and how to do this?
Thanks in advance
Alex

Hi Willem,
thank you for the great post. It did the job very well.
Alex
>>> <[email protected]> schrieb am 1.8.2013 um 07:46 AM:
> arlorenz;2275156 Wrote:
>> Hi all,
>>
>> i checked the documentation but i could not found a possibility to
>> create an additional user with admin rights to access the Vibe
>> Management Console.
>> Does anybody know if this is possible and how to do this?
>>
>> Thanks in advance
>>
>> Alex
>
> Hey Alex,
>
> Yes, that's possible. It's somewhat a twofold/threefold process, as
> you have to give an accounts right to administer the zone, and then also
> have to give that account rights to the personal workspace root (to be
> able create/delete user accounts) and any workspaces that need to be
> administered.
>
> I always create an vibe-admins group (local group) that gets the rights
> to the zone and workspace roots. Then add the needed users to that
> group.
>
> Access for the zone can be set within the administration console:
> https://www.novell.com/documentation...ata/bk4saug.ht
> ml
>
> Then add the needed rights on the workspace roots, Global, personal &
> team workspaces.
>
>
> !Do note that admin is the only user that is not allowed to get
> blocked. Other admin users can be filtered out via ACL's.
>
>
> Cheers,
> Willem

User with admin rights can't access files through the command prompt

I have a strange situation where I have 2 users both setup exactly the same with admin rights on a 2003 (32 bit) server through an AD group membership, but one can do everything as expected but the other can't.
The one that can't is trying to execute a program is a command prompt and keeps getting access denied or invalid directory when trying to cd into the folder. I double and tripled check the permissions and they are correct, this person should have
full admin. In fact I did a effective permissions through explorer and it states full rights. Along those lines this person can also access the folder in question through explorer just not a command prompt.
Has anyone seen this before ? and if so what can be done about it.
Thanks

Hi,
Can the user execute the program through explorer? In Windows Server 2003, the Users group does not have Read and Execute permissions to the command processor (Cmd.exe).
You could refer to the article below to resolve the issue:
"Access is denied" error message when you run a batch job on a Windows Server 2003-based computer
http://support.microsoft.com/kb/867466
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to call a dialog program with return value in another dialog program

Dear All,
How can I call a dialog program with return value from another dialog program?
Regards,
Alok.

Hi Alok,
You can you SET/GET parameters to do this.
This is some information about this.
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETERstatements.
To fill one, use:
SET PARAMETER ID pid FIELD f.
This statement saves the contents of field f under the ID pid in the SAP memory. The ID pid can be up to 20 characters long. If there was already a value stored under pid, this statement overwrites it. If you double-click pid in the ABAP Editor, parameters that do not exist can be created as a Repository object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID pid FIELD f.
This statement places the value stored under the pid ID into the variable f. If the system does not find any value for pid in the SAP memory, sy-subrc is set to 4. Otherwise, it sets the value to 0.
Thanks,
SriRatna

How to open labview program with Quit Labview function inside?

Hi Any idea how to open labview program with Quit Labview function inside?
I forgot to add and set the condition of the type for this program.
If the program is an application, it would close straight away.
If it is still labview work, it will go straight to editing program without closing.
So I need to recover, open it and make some changes.
Clement
Solved!
Go to Solution.

Put the VI in a project and open it from there, then it shouldn't autorun. You can use App.kind property of application to decide whether to close or not.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

How do you close programs with new iOS7? Old way doesn't seem to work!

How do you close programs with new iOS7? Old way doesn't seem to work!

After double tap home button, swipe up on the app card that appears above the icon.

Firefox Silent updater will not work unless I launch Firefox.exe one time with Admin rights

I am building a Firefox 17.0.4 ESR package to use for my Enterprise. Everything is working great except for the updater piece. I am using the configuration.ini file during the install with the command MaintenanceService=true turned on, and a mozilla.cfg file with updates enabled, pref("app.update.enabled", true). I am running the install both manually, and through SCCM with Admin rights, including the maintenance service. After the install runs, I open Firefox as a limited user and go to Help->About, and it says Updates are available at www.firefox.com, and that the browser is set to the ESR release channel.
In all my troubleshooting, the only 2 sure ways I have found that make the auto updates work for a user were to run firefox.exe as an admin 1 time, or to install the base esr package as an admin after my install package. That will fix it for the logged in user only, but another user would run into the same issue. It appears that something is not installing correctly, but I cannot determine the cause.
My install command is:
Firefox Setup 17.0.3esr.exe /INI=%INST%\Configuration.ini

In my organization, we have removed Admin rights from all users, but use a product that can elevate any .exe with create a policy for to run with Admin rights. We have a policy set for updater.exe and it does work for future updates, just not this first update after install until Firefox itself is run as Admin for the first time. My thought is that when Firefox and the Maintenance service are installed with Admin rights through SCCM, the maintenance service should have inherited rights from that install. Forgive me if I am wrong in my conclusion.

How to install AIR in Non-Admin rights PC ?

Who can teach me how to solve under issue ?
1.How to transfer AIR file to exe file
2.How to install AIR in Non-Admin rights computer?
-->In my company all PC has contorled, i want to install application in any Notebook for Sales Using,they can using AIR offline in anywhere
Thank you so much!!

On Mac OS, to install or update an AIR application, the user needs to have adequate system privileges to install to the application directory (and administrative privileges if the application needs to update the runtime). On Windows, a user needs to have administrative privileges.
IT administrators can install AIR applications silently using standard desktop deployment tools. For more information, see "Enterprise deployment" in the following page:
http://help.adobe.com/en_US/AIR/1.5/air_admin/WS5b3ccc516d4fbf351e63e3d11c0f5986ec-8000.ht ml#WS5b3ccc516d4fbf351e63e3d11c0f59823a-7fee

How to start a program with Admin rights without UAC dialog?

Similar Messages

Maybe you are looking for