How to Start a Transaction from SOLAR02 in ECC in a Different Language?
Dear Experts,
we are implementing SAP ECC 6.0 and I have to set up some test cases on SolMan..
I added the transactions that our testers should execute trough SOLAR02 and RFC in ECC.
Now, I need to enable the testers from SolMan (logged in EN) to start a transaction in ECC, in SH language.
The problem is the SAP Solution Manager has only default languages available, but in ECC there is SH language as well.
I have tried to set SH as default language in ECC in SU01, as well as in SolMan in SU01 (although I must logon to SolMan in EN) for the same user - and when a tx is started from SOLAR02 in ECC, it is started in EN language...
Any advice would be appreciated...
Thank you in advance and best regards,
Nenad
Edited by: Nenad Nikolic on Apr 10, 2009 4:09 PM
Hi Nesimi, thanks for an answer, but the problem is that there is still no SH language interface customization for SolMan (I'll have to double check this - I have always used just EN in SolMan...)
Anyway - the solution might be easy, as I was thinking in another direction, and I will post the result here when I try it out:
I want to find out is the problem solved if I define SH as the language for the trusted connection from SolMan to ECC.
I tried it with a SM.......CLNT.......LOGIN connection, and it worked with logon screen. Now all I have to do is to try it with trusted connection, as soon as I resolve another problem...
Once again thank you for an answer,
Nenad
p.s. - I am not sure if I have understood the "as well as all content is displayed in SolMan and not ECC" part - in any way - clicking on the transaction XXX in Solman (one tx from the list of transactions for testing - stored in tx SOLAR02), opens a new session window in ECC, and goes directly in XXX transaction...
Similar Messages
-
How to access ITS transaction from R/3
Hi All,
Is it possible to access ITS transaction like PZ02 in R/3? If yes, please tell me how to do the same?
Thanks and warm regards,
AdityaI dont think it is possible ...
FYI
Transaction PZ02 cannot be called in the Easy Access Menu; see long text
Message no. S#536
Diagnosis
The transaction that you wish to start can only be started in the Web
browser. It does not make sense to start the transaction from the Easy
Access Menu because the transaction was specifically designed to be used
in the browser. -
Hello, sombody knows how to start MS Excel from LabView (version 8.2)? Thank you in advance.
Regards RobertIn the example finder ">Help>Find Examples >>search for Excel", you'll find a sample program called "ActiveX Event Callback for Excel".
It opens the Excel Application.. You can build on this to open/create new worksheet(s), etc.
RayR
Message Edited by JoeLabView on 06-20-2007 08:21 AM
Attachments:
OpenExcel.PNG 34 KB -
How to block sap transactions from particular date
how to block sap transactions from particular date
Hi
If it is G/L Account inactive means.
Go to => Financial => Chart of Account => Select the Account to be Blocked = > Account Details
You can found the Active and Inactive Parameters. You can Specify the date period you want to block.
If it is Business Partner Means
Go to Business partners => Select the Business partner you want to block.
You can find the Active and Inactive Parameters. You can Specify the date period you want to block.
If you want period means
Go to Administration => System Initialization => Posting period => Click the above period => Select the period status and Lock
With Regards
Balaji -
How to execute SAP Transaction from cmd
Hi, Dear All,
How can we execute an SAP Transaction from the command prompt.
Your inputs are highly appreacited.
regardsGo to the command prompt (CMD) and change to the directory where the SAPGUI software is located. Then, run: sapgui <hostname> <instance> Example: sapgui sapprd 00 This is a very fast way to start a SAPGUI session against the indicated SAP system and instance number.
another way is to locate the file of logon pad
in my system it was at C:\WINDOWS\SAPwksta\setup\SAL
after that type saplogon.sal
It will take you to the logon pad. -
How to start WAD report from MSS with Hierarchy ?
Hello to all.
I have a WAD Report that the parameters for it are: Org unit - as the root, and a year/month.
The report receive an org unit and display data for it and for all org units under it in the Org. structure.
I start the report from the MSS.
In R/3 in table T77MWBBWS I created an entry for that report with Reference char. = "ORG_STRU" instead of "0orgunit".
The report ignores the Org unit that I choose from the MSS selection screen, and starts with the Root Org unit of my Org structure.
What to do in order to start the report with the Org unit that i select and to get results for all the org. units under it ?
Thanks, Pazit Atar.I am also facing same problem.
I want to know how the org unit which is selected on MSS screen is passed to backend R/3 report (which is using PNP logical db)
PLEASE HELP. -
How to call a transaction from ABAP code
Hi everybody,
How do I run a transaction from my ABAP code?
For example, through my ABAP code, I want to call the ME24 transaction (Maintain Purchase Order).
Thanks for the help,
RoyCALL TRANSACTION
Syntax
CALL TRANSACTION ta { [AND SKIP FIRST SCREEN]
| [USING bdc_tab [bdc_options]] }.
Extras:
1. ... AND SKIP FIRST SCREEN
2. ... USING bdc_tab [bdc_options]
Effect
The statement CALL TRANSACTION calls the transaction whose transaction code is contained in data object ta. The data object ta must be of character type and must contain the transaction code in uppercase letters. If the transaction specified in ta cannot be found, an untreatable exception is triggered. The additions suppress the display of the initial screen and allow you to execute the transaction using a batch input session.
At CALL TRANSACTION the calling program and its data is kept, and after exiting the called transaction, processing is resumed in the calling program after the call.
When the transaction is called, the ABAP program linked with the transaction code is loaded in a new internal session. The session of the calling program is kept. The called program runs in an SAP LUW of its own.
If the called transaction is a dialog transaction, after loading the ABAP program the event LOAD-OF-PROGRAM is triggered and the dynpro defined as initial dynpro of the transaction is called. The initial dynpro is the first dynpro of a dynpro sequence. The transaction is finished when the dynpro sequence is ended by encountering the next dynpro with dynpro number 0 or when the program is exited with the LEAVE PROGRAM statement.
If the called transaction is an OO transaction (as of release 6.10), when loading all programs except class pools the event LOAD-OF-PROGRAM is triggered and then the method linked with the transaction code is called. If the method is an instance method, implicitly an object of the corresponding class is generated and referenced by the runtime environment. The transaction is finished when the method is finished or when the program is exited using the LEAVE PROGRAM statement.
After the end of the transaction call, program execution of the calling program resumes after the CALL TRANSACTION statement.
Note
At the statement CALL TRANSACTION, the authorization of the current user to execute the called transaction is not checked automatically. If the calling program does not execute a check, the called program must check the authorization. To do this, the called program must call function module AUTHORITY_CHECK_TCODE.
Addition 1
... AND SKIP FIRST SCREEN
Effect
This addition suppresses the display of a screen of the initial dynpro of a called dialog transaction. The addition AND SKIP FIRST SCREEN suppresses the first screen under these prerequisites:
For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number.
All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters
If these prerequisites are met, that screen of the dynpro is displayed that is specified in the Screen Painter as the next dynpro of the initial dynpro.
Example
If the static next dynpro of the initial dynpro of the called dialog transaction FLIGHT_TA is not the initial dynpro itself, its screen is suppressed, because its input fields are filled using the SPA/GPA parameters CAR and CON.
DATA: carrid TYPE spfli-carrid,
connid TYPE spfli-connid.
SET PARAMETER ID: 'CAR' FIELD carrid,
'CON' FIELD connid.
CALL TRANSACTION 'FLIGHT_TA' AND SKIP FIRST SCREEN.
Addition 2
... USING bdc_tab [bdc_options]
Effect
Use this addition to pass an internal table bdc_tab of row type BDCDATA from the ABAP Dictionary to a dialog transaction. The additions bdc_options control the batch input processing. When a transaction with addition USING is called, the system field sy-binpt is set to value "X" in the called program - while this transaction is running, no other transaction can be called with this addition.
The internal table bdc_tab is the program-internal representation of a batch input session and must be filled accordingly. The structure BDCDATA has the components shown in the table below.
Component Description
PROGRAM Name of the program of the called transaction
DYNPRO Number of the dynpro to be processed
DYNBEGIN Flag for the beginning of a new dynpro (possible values are "X" and " ")
FNAM Name of a dynpro field to be filled or batch input control statement, for example, to position the cursor
FVAL Value to be passed to the dynpro field or to the control statement
Using the internal table bdc_tab, you can provide any number of screens of the called transaction with input and user actions.
System Fields
sy-subrc Description
0 The batch input processing of the called transaction was successful.
< 1000 Error in the called transaction. If within the transaction a message was sent, you can receive it using the addition MESSAGES.
1001 Error in batch input processing.
Note
Outside of ABAP Objects you can specify the additions AND SKIP FIRST SCREEN and USING together. However, this does not make sense, because the addition AND SKIP FIRST SCREEN is desigend only to fill the mandatory input fields using SPA/GPA parameters, while the batch input table specified with USING controls the entire transaction flow including the display of the screens.
Example
Call of the Class Builder (transaction SE24) and display of class CL_SPFLI_PERSISTENT. The internal table bdcdata_tab contains the input for the batch input processing of the first dynpro (1000) of the transaction. Using structure opt, the batch input processing is set to suppress the first screen and to display the next screen in the standard size.
DATA class_name(30) TYPE c VALUE 'CL_SPFLI_PERSISTENT'.
DATA: bdcdata_wa TYPE bdcdata,
bdcdata_tab TYPE TABLE OF bdcdata.
DATA opt TYPE ctu_params.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLSEOD'.
bdcdata_wa-dynpro = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'SEOCLASS-CLSNAME'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'SEOCLASS-CLSNAME'.
bdcdata_wa-fval = class_name.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=CIDI'.
APPEND bdcdata_wa TO bdcdata_tab.
opt-dismode = 'E'.
opt-defsize = 'X'.
CALL TRANSACTION 'SE24' USING bdcdata_tab OPTIONS FROM opt. -
How to start a selection from an exact time of the clip?
Hello,
I'm a new user of iMovie '08 and I'd like to know how to start the selection of a part of a clip from an exact point.
Let me explain (I'm not english, so I hope everyone understands) :
Let's say I have one clip that lasts 1h20' ok? I remember that at 9'20'' there's a scene I want to catch. And It's very important to be at 9'20'' because there's a peculiar frame I want.
Let's also say that my problem is not about a single point, but a lot of them. I wrote down (as an example) these parts I want.
9'20''
15'10''
36'00''
ok?
How do I place myself in that part of the clip? I don't want to look at the scene since I don't remember it well (I wrote down the minutes since I short in memory).
I hope this is possible. Thank you very much for your helpQuickTime Player Pro (a $30 upgrade of QuickTime Player, available from Apple) lets you do exactly what you want to do. It lets you select a chunk of any movie using one of three time formats (one is min:sec:frames). You can Copy that chunk and Paste it into a new movie. In other words, it lets you extract just the frames you want that go in a new movie that you save as a standalone movie.
To use the new movie you would drop it in the iMovie Events folder. (Or more likely, create a new folder in the iMovie Events folder where you drop all your chunk movies.)
When you next launch iMovie it will generate thumbails for each of your chunk movies. Now you can use them in iMovie 7 like any other import.
If you have iMovie 6 you can also do it there, for it shows you the min:sec:frames of your one long clip. To use any chunk elsewhere, you would use iMovie 6 to split the clip, then use the Share selected clip only checkbox in the export dialog window to export each chunk to a Full Quality DV movie.
Karl -
How to start a browser from within a java program?
I want to make a help file for my java program and want to run the browser from the menu of my program.
How can I start my browser from my program?
A small code will be helpful.
Thanks.
NiteenThis should work on Windows without having to know where the browser is located. See http://www.javaworld.com/javaworld/javatips/jw-javatip66.html for more details
public static void viewHtml(URL url, boolean fixHtmlExtension){
String cmd = "rundll32 url.dll,FileProtocolHandler " + url.toExternalForm();
if (fixHtmlExtension){
//There is a bug in rundll32. For http requests, it doesn't like .html or .htm extensions,
//but replacing the 'm' with '%6D' works.
//This fix is not needed for file requests.
if (cmd.endsWith(".htm")){
cmd = cmd.substring(0,cmd.length()-1) + "%6D";
else if (cmd.endsWith(".html")){
cmd = cmd.substring(0,cmd.length()-2) + "%6Dl";
Process process = Runtime.getRuntime().exec(cmd);
try{
process.waitFor();
catch(InterruptedException e){ -
How to start TreeCellEditor apart from default behaviors
Hi,
I'm trying to find the way to start TreeCellEditor apart from default behaviors which are triple mouse click, click-pause-click and F2 (in Windows).
The only way I found for starting editor in tree is JTree.startEditingAtPath. However the problem is I designed to separate the action(model) from the tree (view). So In my action class, it knows only TreeModel but not JTree.
How could I set my action class to tell the JTree to start editor? Is there any approach to do so but do not break my design?
Thanks in advance.I had to do a custom JTree to get my editor to work the way you wanted.
I needed mine to allow a double mouse click. Then when in edit mode have the text default to a 'select all'.
All of the 'Rollup' items are custom objects but this should give you an idea of what to do.
class CustomUI extends BasicTreeUI
protected boolean startEditing(TreePath path, MouseEvent event) {
// default to standard behavior
boolean result = super.startEditing(path, event);
// start editing this node?
if (result) {
// start peeling the object to get a handle to the editor
RollupTree rollupTree = (RollupTree) event.getSource();
RollupTreeEditor editor = (RollupTreeEditor) rollupTree.getCellEditor();
// set Icon if node a trader
RollupNode node = (RollupNode) rollupTree.getSelectionPath().getLastPathComponent();
if (node.isTrader()) {
editor.setEditorIcon(IconLoader.getIcon("Trader.png"));
JTextField textField = editor.getEditor();
// they want to default so that the edit text
// is in selected mode when they first start to edit the field
textField.selectAll();
return result;
}I also did a custom default editor which looks like:
class RollupTreeEditor extends DefaultTreeCellEditor
public RollupTreeEditor(final JTree tree, final RollupTreeCellRenderer renderer) {
super(tree, renderer);
* Allow people to toggle the icon when in edit mode
* @param editor Icon
public void setEditorIcon(Icon editor) {
editingIcon = editor;
* If the <code>realEditor</code> returns true to this
* message, <code>prepareForEditing</code>
* is messaged and true is returned.
* @param event EventObject
* @return boolean
public boolean isCellEditable(EventObject event) {
if (event instanceof MouseEvent) {
// double click for edit
if (((MouseEvent) event).getClickCount() == 2) {
return true;
return false;
public DefaultTextField getEditor() {
return (DefaultTextField)this.editingComponent;
}Then in my custom JTree I set these up like...
// turn on tooltips
ToolTipManager.sharedInstance().registerComponent(this);
// used by two setters so create reference
RollupTreeCellRenderer renderer = new RollupTreeCellRenderer();
// customizing the icons for the tree
// setting the folder icons
// renderer.setOpenIcon(IconLoader.getIcon("Open.gif"));
// renderer.setClosedIcon(IconLoader.getIcon("Folder.gif"));
renderer.setLeafIcon(null); // drop the icon
// add renderer to highlight Inventory nodes with Red or Blue text
setCellRenderer(renderer);
// set the editor
setCellEditor(new RollupTreeEditor(this, renderer));
// set UI to over ride editing event method
setUI(new CustomUI());A nice touch is to add a mouse listener so if the user clicks out of the editor it cancels the edit mode. So here is the simple call:
tree.addMouseListener(new MouseAdapter()
public void mouseClicked(MouseEvent e) {
// get handle to tree
RollupTree tree = (RollupTree) e.getSource();
// exit editor if in edit mode
tree.getCellEditor().stopCellEditing();
public void mouseReleased(MouseEvent e) {
if (e.isPopupTrigger()) {
menu.show(e.getComponent(), e.getX(), e.getY());
});Does this help answer your question? -
How to start managed server from admin server both running
I have an admin server on one machine and created a managed server on different
machine, I am not able to start managed server from either machine. When I used
the admin server machine to start the managed server remotely I got this message
Connecting to http://fkeita:7001...
<Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Security initializi
ng using realm myrealm.>
<Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328> <Starting WebL
ogic Managed Server "managedserver3" for domain "admindomain">
<Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350> <Unable to
create a server socket on Channel Default for: BFINKELMAN/90.0.0.25, port: 8002.
java.net.BindException: Cannot assign requested address: JVM_Bind Perhaps the
a
ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using port 8002.>
<Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Server failed
to
bind to any port such that it is not reachable from the console.>
<Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initialization exception>
When I tried to connect managed server from its machine to admin server (running
on separate machine ) I got this error
Starting WebLogic Server...
Connecting to http://fkeita:7001...
<Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Security initializi
ng using realm myrealm.>
<Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364> <Server fail
ed during initialization. Exception:java.lang.SecurityException: Authentication
for user system denied
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
<Jul 17, 2002 11:15:18 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user system denied
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user system denied
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
Thanks."fkeita" <[email protected]> wrote in message
news:[email protected]...
>
I have an admin server on one machine and created a managed server ondifferent
machine, I am not able to start managed server from either machine. When Iused
the admin server machine to start the managed server remotely I got thismessage
>
Connecting to http://fkeita:7001...
<Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Securityinitializi
ng using realm myrealm.>
<Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328><Starting WebL
ogic Managed Server "managedserver3" for domain "admindomain">
<Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350><Unable to
create a server socket on Channel Default for: BFINKELMAN/90.0.0.25, port:8002.
java.net.BindException: Cannot assign requested address: JVM_Bind Perhapsthe
a
ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using port8002.>
>
Try running netstat to see whether another process is actually running at
the given address/port.
Also check using ifconfig/ipconfig or directly checking /etc/hosts file of
the box to see whether the ips addreses are correct.
<Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Serverfailed
to
bind to any port such that it is not reachable from the console.>
<Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342><Unable to
initialize the server: Fatal initialization exception>
When I tried to connect managed server from its machine to admin server(running
on separate machine ) I got this error
Starting WebLogic Server...
Connecting to http://fkeita:7001...
<Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Securityinitializi
ng using realm myrealm.>
<Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364><Server fail
ed during initialization. Exception:java.lang.SecurityException:Authentication
for user system denied
java.lang.SecurityException: Authentication for user system denied
atweblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
atweblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>Seems to be some issue with security credentials.
Try running the manageed server directly (as sort of admin) by not passing
the admin server url and bringing it just like an admin server.
See if this works. If it works, then soemthing wrong in the way the admin
server is receiving the request/security credentials from managed server.
Also make sure both managed and admin servers are on the same patch/service
pack level.
-Sabha -
How to start managed server from admin server both running on separate machines
I have an admin server on one machine and created a managed server on different
machine, I am not able to start managed server from either machine. When I used
the admin server machine to start the managed server remotely I got this message
Connecting to http://fkeita:7001...
<Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Security initializi
ng using realm myrealm.>
<Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328> <Starting WebL
ogic Managed Server "managedserver3" for domain "admindomain">
<Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350> <Unable to
create a server socket on Channel Default for: BFINKELMAN/90.0.0.25, port: 8002.
java.net.BindException: Cannot assign requested address: JVM_Bind Perhaps the
a
ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using port 8002.>
<Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Server failed
to
bind to any port such that it is not reachable from the console.>
<Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initialization exception>
When I tried to connect managed server from its machine to admin server (running
on separate machine ) I got this error
Starting WebLogic Server...
Connecting to http://fkeita:7001...
<Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Security initializi
ng using realm myrealm.>
<Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364> <Server fail
ed during initialization. Exception:java.lang.SecurityException: Authentication
for user system denied
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
<Jul 17, 2002 11:15:18 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user system denied
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user system denied
java.lang.SecurityException: Authentication for user system denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
Thanks.
I used startmanagedweblogic managedserver1 http://fkeita:7001 to try to start managed
server, but it did not work, and got error messages. Error messages are posted
on my first posting.
"pankaj" <[email protected]> wrote:
>Use the startManagedWeblogic.cmd / .sh script to start your
>Managed/Clustered servers
>
>
>"fkeita" <[email protected]> wrote in message
>news:[email protected]...
>>
>> I have an admin server on one machine and created a managed server
>on
>different
>> machine, I am not able to start managed server from either machine.
>When I
>used
>> the admin server machine to start the managed server remotely I got
>this
>message
>>
>> Connecting to http://fkeita:7001...
>> <Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Security
>initializi
>> ng using realm myrealm.>
>> <Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328>
><Starting WebL
>> ogic Managed Server "managedserver3" for domain "admindomain">
>> <Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350>
><Unable to
>> create a server socket on Channel Default for: BFINKELMAN/90.0.0.25,
>port:
>8002.
>> java.net.BindException: Cannot assign requested address: JVM_Bind
>Perhaps
>the
>> a
>> ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using
>port
>8002.>
>>
>> <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Server
>failed
>> to
>> bind to any port such that it is not reachable from the console.>
>> <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342>
><Unable to
>> initialize the server: Fatal initialization exception>
>>
>> When I tried to connect managed server from its machine to admin server
>(running
>> on separate machine ) I got this error
>>
>> Starting WebLogic Server...
>> Connecting to http://fkeita:7001...
>> <Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Security
>initializi
>> ng using realm myrealm.>
>> <Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364>
><Server fail
>> ed during initialization. Exception:java.lang.SecurityException:
>Authentication
>> for user system denied
>> java.lang.SecurityException: Authentication for user system denied
>> at
>weblogic.security.service.SecurityServiceManager.doBootAuthorization(
>> SecurityServiceManager.java:978)
>> at
>weblogic.security.service.SecurityServiceManager.initialize(SecurityS
>> erviceManager.java:1116)
>> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
>> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
>> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
>> at weblogic.Server.main(Server.java:31)
>> >
>> <Jul 17, 2002 11:15:18 AM EDT> <Emergency> <WebLogicServer> <000342>
><Unable to
>> initialize the server: Fatal initialization exception
>> Throwable: java.lang.SecurityException: Authentication for user system
>denied
>> java.lang.SecurityException: Authentication for user system denied
>> at
>weblogic.security.service.SecurityServiceManager.doBootAuthorization(
>> SecurityServiceManager.java:978)
>> at
>weblogic.security.service.SecurityServiceManager.initialize(SecurityS
>> erviceManager.java:1116)
>> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
>> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
>> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
>> at weblogic.Server.main(Server.java:31)
>> >
>>
>***************************************************************************
>> The WebLogic Server did not start up properly.
>> Exception raised:
>> java.lang.SecurityException: Authentication for user system denied
>> at
>weblogic.security.service.SecurityServiceManager.doBootAuthorization(
>> SecurityServiceManager.java:978)
>> at
>weblogic.security.service.SecurityServiceManager.initialize(SecurityS
>> erviceManager.java:1116)
>> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
>> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
>> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
>> at weblogic.Server.main(Server.java:31)
>> Reason: Fatal initialization exception
>> Throwable: java.lang.SecurityException: Authentication for user system
>denied
>> java.lang.SecurityException: Authentication for user system denied
>> at
>weblogic.security.service.SecurityServiceManager.doBootAuthorization(
>> SecurityServiceManager.java:978)
>> at
>weblogic.security.service.SecurityServiceManager.initialize(SecurityS
>> erviceManager.java:1116)
>> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
>> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
>> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
>> at weblogic.Server.main(Server.java:31)
>>
>> Thanks.
>
>
-
How to start sql server from cmd
i am starting sql server from command prompt but i get error message as under :
2014-04-04 23:41:55.90 Server Error: 17058, Severity: 16, State: 1.
2014-04-04 23:41:55.90 Server initerrlog: Could not open error log file ''.
Operating system error = 3(failed to retrieve text for this error. Reason: 1510
5).
2014-04-04 23:41:56.21 Server Error: 17058, Severity: 16, State: 1.
2014-04-04 23:41:56.21 Server initerrlog: Could not open error log file ''.
Operating system error = 3(failed to retrieve text for this error. Reason: 1510
5).
2014-04-04 23:41:56.50 Server Error: 17058, Severity: 16, State: 1.
2014-04-04 23:41:56.50 Server initerrlog: Could not open error log file ''.
Operating system error = 3(failed to retrieve text for this error. Reason: 1510
5).
2014-04-04 23:41:56.80 Server Error: 17058, Severity: 16, State: 1.
2014-04-04 23:41:56.80 Server initerrlog: Could not open error log file ''.
Operating system error = 3(failed to retrieve text for this error. Reason: 1510
5).
2014-04-04 23:41:57.10 Server Error: 17058, Severity: 16, State: 1.
2014-04-04 23:41:57.10 Server initerrlog: Could not open error log file ''.
Operating system error = 3(failed to retrieve text for this error. Reason: 1510
5).
2014-04-04 23:41:57.41 Server Error: 17058, Severity: 16, State: 1.
2014-04-04 23:41:57.41 Server initerrlog: Could not open error log file ''.
Operating system error = 3(failed to retrieve text for this error. Reason: 1510
5).Hi,
I agree with Erland. You need to verify and specify the correct path for the error log in Startup parameters.
For example: -eC:\Program Files\Microsoft SQL Server\MSSQL.n\MSSQL\LOG\ERRORLOG
To configure startup options
1.In SQL Server Configuration Manager, click SQL Server Services.
2.In the right pane, right-click SQL Server (<instance_name>), and then click Properties.
3.On the Startup Parameters tab, in the Specify a startup parameter box, type the parameter, and then click Add.
For example, to start in single-user mode, type -m in the Specify a startup parameter box and then click Add. (When you restart SQL Server in single-user mode, stop the SQL Server Agent. Otherwise, SQL Server Agent might connect first and prevent you from
connecting as a second user.)
4. Click OK.
5.Restart the Database Engine.
For more information, please see:
Configure Server Startup Options (SQL Server Configuration Manager)
http://technet.microsoft.com/en-us/library/ms345416.aspx
Database Engine Service Startup Options
http://technet.microsoft.com/en-us/library/ms190737.aspx
Thanks.
Tracy Cai
TechNet Community Support -
How to start iPhoto mavericks from a particular photo (not from the beginning)
In my previous versions of iphoto I could start the slideshow from any photo, after highlighting it first. Now, I can start it only from the beginning and only if I did not highlight any photo in the albom. If I highlight a photo and then click on ``slideshow'', it will show me this particular photo but will not play after that (even if use settings). Can I do anything about it?
My alboms are long, so to start them each time from the beginning is very inconvenient.There's a bug with iPhoto 9.5.1 and Mavericks in that slidshows from albums only play correctly, i.e. from the first slide, with the photos sorted by date, keyword, rating or title. When sorted manually the slideshow can start5 from any seemingly random photo.
Send a bug report to Apple via http://www.apple.com/feedback/iphoto.html
OT -
MAC: Starting ABAP Transaction from eclipse ADT - Wrong GUI version
Hi there,
I am running eclipse (Kepler Service Release 2) with ADT for SAP HANA (Version 2.28.1) and SAP GUI 7.30 Revision 9.1 on my MAC. Whenever I try to run an ABAP transaction from within the IDE, I do get this error:
The GUI itself runs fine. It seems as if the GUI and ADT version do not match. What should I do?
CheersHi Pascal,
you have already the newest version 7.30 patch level 9. Florian was wrong with 7.30 Compilation 3 Present. 2.
I have the same problem. I have tried older versions 7 and 8 too. With a reinstallation it has worked only for 2 or 3 times. It seems to be a new bug with new ADT 2.28 because 2.24 was working fine. Maybe it is related to the java version.
Actually I have no time to take care of this and create an OSS message.
Regards
Andreas
Maybe you are looking for
-
Application to Run in Terminal? (Eclipse)
Hi guys, I am new to Eclipse and would like to create a java project which I can run from the linux (kubuntu) bash terminal. I've used Netbeans before and building it simply creates a jar file in the dist folder then I can run java -jar HelloWorld.ja
-
How to know what all tables included in an infocube?
Hi If i want to know what all the tables in an standard infocube, how? Thanks, Ram
-
Having only one field checkable
hello all I am using the form wizard to place fields in a PDF(s) - we have these PDFs for our users to fill out a "checklist" of their qualifications. The idea is that they have a subject like: Arterial Monitoring... and to the right are 4 fields ( A
-
Having issues since the install of Acrobat Reader 8 with pagesize. I have a document that needs to be rendered 14x8.5 (Legal Landscape). I have tried pagetype="legal" orientation="landscape", I have also tried pagetype="custom" pageheight="8.5" pagew
-
How do I de-install iTunes version 7 and where can I get iTunes 6 from?
itunes 7 is causing more problems than its worth and I really really really want to roll back a release. How do I do it? Neil